- If the supply cord is damaged,it must be replaced by the
manufacturer,its service agent or similarly qualified
persons in order to avoid a hazard.
- The new hose-sets supplied with the appliance are to
be used and that old hose-sets should not be reused.
- This washing machine is for indoor use only.
- The openings must not be obstructed by a carpet.
- (This warning is only for EUROPEAN market )This ap pliance can be used by children aged from 8 years and
above and persons with reduced physical,sensory or
mental capabilities or lack of experience and knowledge
if they have been given supervision or instruction con cerning use of the appliance in a safeway and underst and the hazards involved. Children shall not play with
the appliance.Cleaning and user maintenance shall not
be made by children without supervision.
- (This warning is not for EUROPEAN market)This appl iance is not intended for use by persons (including chi ldren) with reduced physical, sensory or mental capa bilities, or lack of experience and knowledge, unless
they have been given supervision or instruction conc-
P.02
erning use of the appliance by a person responsible
for their safety.Children should be supervised to ensure
that they do not play with the appliance.
- Pull out its plug from the power socket before cleaning
or maintenance.
- Make sure that all pockets are emptied.
P.03
Safety Precautions
- Sharp and rigid items such as coin,brooch,nail,screw or
Safety Precautions
- Make sure that the water and electrical devices must
stone etc.may cause serious damages to this machine.
- Pull out its plug and cut off water supply after the operation.
- Please check whether the water inside the drum has been
drained before opening its door.Please do not open the
door if there is any water visible.
- Pets and kids may climb into the machine. Check the
machine before every operation.
- Glass door may be very hot during the operation.Keep
kids and pets far away from the machine during the
operation.
- Take care that power voltage and frequency shall be id entical to those of washing machine.
- Do not use any socket with rated current less than that of
washing machine.Never pull out power plug with wet hand.
- To ensure your safety,power cord plug must be inserted
into an earthed three-pole socket.Check carefully and
make sure that your socket is properly and reliably earthed.
be connected by a qualified technician in accordance
with the manufacturer's instructions and local safety
regulations.
- Before operating this machine,all packages and trans port bolts must be removed.Otherwise,the washing
machine may be seriously damaged while washing the
clothes.
- Before washing the clothes at first time, the washing
machine shall be operated in one round of the whole
procedures without the clothes inside.
- The washing machine with single inlet valve only can
be connected to the cold water supply. The washing
machine with double inlet valves can be connected to
the hot water and cold water supply.
- Your washing machine is only for home use and is only
designed for the textiles suitable for machine washing.
- Flammable and explosive or toxic solvents are forbidden.
- Children of less than 3 years should be kept away unless
continously supervised.
- Kids should be supervised to ensure that they do not pl ay with the machine.
- Packing materials may be dangerous to the kids.
Please keep all packing materials (plastic bags,foams
etc) far away from the kids.
- Washing machine shall not be installed in bath room or
very wet rooms as well as in the rooms with explosive or
caustic gases.
P.04
Gasoline and alcohol etc.Shall not be used as detergents.
Please only select the detergents suitable for machine
washing, especially for drum.
- It is forbidden to wash carpets.
- Be careful of burning when washing machine drains hot
washing water.
- Never refill the water by hand during washing.
- After the program is completed, Please wait for two
minutes to open the door.
- Please remember to disconnect water and power sup-
P.05
Safety Precautions
ply immediately after the clothes are washed.
- Do not climb up and sit on top cover of the machine.
- Do not lean against machine door.
- Please do not close the door with excessive forces.If it
Overview of Washing Machine
Component
Detergent Drawer
Control Panel
is found difficult to close the door,please check if the
excessive clothes are put in or distributed well.
- The household washing machine isn't intended to be
built-in.
- Cautions during Handling Machine
1.Transport bolts shall be reinstalled to the machine by
a specialized person.
2.The accumulated water shall be drained out of the machine.
3. Handle the machine carefully. Never hold each protr uded part on the machine while lifting. Machine door
can not be used as the handle during the conveyance.
- Notes on disposal:
This marking indicates that this product should not
be disposed with other household wastes throug-
hout the EU.To prevent possible harm to the env ironment or human health from uncontrolled waste
disposal,recycle it responsibly to promote the su-
Power Plug
Door
Outlet Hose
Service Panel
Detergent Box
stainable reuse of material resources.To return
your used device,please use the collection systems
or contact the retailer where the product was pur chased. They return and can take this product for
environmental safe recycling.
P.06
Accessories
Transport
plughole
ole
Hplug
optional
()
Inlet pipe
C
P.07
Inlet pipe
H (optional)
Outlet hose
(optionalsupport)
Install Washing Machine
Install Washing Machine
Unpacking the washing machine
Unpack your washing m achine and check if there is any damage during th e transportation.
Also make sure that all t he items in the attached bag are received.
If there is any damage to t he washing machine during the transportation, or any item is
missing, please con tact the local dealer immediately.
Dispose the packing materials
The packing materia ls of this machine may be dangerous to kids. Plea se dispose them
properly and avoid ea sy touch by kids. Please dispose the related pa cking materials
according to the rele vant local regulations. Please do no throw the packing materials
away together with th e other daily living rubbishes.
Remove transport bolts
Before using this was hing machine, transport bolts
must be removed from th e backside of
this machine. Pleas e take the following steps to
remove the bolts:
1.Loosen all bolts wit h spanner and then remove them.
2.Stop the holes with tr ansport hole plugs.
3.Keep the transport b olts properly for future use.
Select the location
Before installing t he washing machine, the location characte rized as follows shall be
selected:
- Rigid, dry, and level surface (if not level, please make i t level with reference to the
following figure “A djust Leg”)
- Avoid dir ect sunlight
- Suffic ient ventilation
- Room temperature is a bove 0 C
- Keep far away from the he at resources such as coal or gas.
Make sure that the wash ing machine will not stand on power cord.
Do not install the wash ing machine on the carpet floor.
Adjust Leg
1.When positioning t he washing machine, please
first check if the legs a re closely attached to the
cabinet. If not, plea se turn them to their original
positions with hand o r spanner and tighten the
nuts with spanner.
2.After positionin g the washing machine, press
four corners on top cov er of washing machine
in sequence. If the was hing machine is not
stable when being pre ssed, this leg shall be
adjusted.
3.Ensure the positio ning status of washing machine. Loosen the lock nut with spanner
and turn the leg with han d until it closely contacts with the floor. Pres s the leg with one
hand and fasten the nut c losely to the cabinet with the other hand.
4.After being locked p roperly, press four corners again to make sure that they has been
adjusted properly. If it is still unstable, it has to repe at Steps 2 and 3.
5.Put a solid cylinder (e.g. pop cans) oppositely on the top cover of the washing machine from in
the left, right, front and back directions. If the cylinder keeps stable, the washing machine is
positioned level. If it rolls, the washing machine is positioned unlevel. The rolling direction is the
direction of lower ground surface. Then, the two legs in this direction shall be raised at the same time
until the washing machine is level. Steps 1~3 are repeated to make the bottom legs closely against
the ground and the nuts shall be locked tightly.
Connect inlet pipe
Connect the inlet pip e as indicated in the figure.
For the model which has h ot valve , please connect
the hot vale to hot water t ap. Energy will decrease
automatically for s ome program.
Install inlet pipe
1.Connect the elbow to t ap and fasten it
clockwise.
2.Connect the other en d of inlet pipe to the inlet
valve at the backside o f washing machine and
fasten the pipe tight ly clockwise.
Notes: after connec tion, if there is any leakage
with hose, then repea t the steps to connect inlet
pipe. Th e most common type of tap shall be
used to supply water. If t ap is square or too big,
then standard tap sha ll be changed.
Place outlet hose
There are two ways to pla ce the end of outlet hose:
1.Put it beside the wate r trough.
Hole plug
This Hole plug is used to j am the hole on the back
cabinet.
P.08
P.09
Loading...
+ 11 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.