Teeter X1, X2, X3 Assembly Instructions

FitSpine XTM Series
Assembly Instructions

Models X1, X2, X3

For gravity-assisted stretching and decompression

NEW!

Follow along with
your smartphone
to make assembly
even easier!

FULL

YEAR

5

W

To download and print the Teeter
FitSpine X
Product Manuals page at teeter.com.

™

instructions, visit the

Y

T

A

N

R

A

R

I created Teeter so people could

* Specifications may vary from this image and are

subject to change without notice.

EN

The X1 is shown here. Your actual model may vary.

live healthier, more active lives.

founder & innovator

Congratulations on your purchase of a Teeter FitSpine X

the assembly instructions, read and fully understand the Owner’s Manual attached to the equipment, and review the Getting

Started Video Portal at teeter.com/videos prior to using your new Teeter Inversion Table.

Teeter Decompression Devices are 510(k) registered with the FDA and are multiple user, reusable medical devices for home use,

intended to provide traction to the spine while stretching the para-spinal muscle and soft tissues. The devices provide non-powered

traction and are meant for use by adults.

Teeter Decompression Devices are indicated for the following conditions: back pain, muscle tension, degenerative disc disease,

spinal degenerative joint disease, spinal stenosis, herniated disc, spinal curvature due to tight muscles, sciatica, muscle spasm, and

facet syndrome.

For step-by-step, 3D interactive instructions, download BILT (a FREE mobile app) to your smartphone to follow along.

See Page 5 for instructions on how to download BILT.

To register your product warranty, go to teeter.com/Support/Warranty-Registration

™

Series Inversion Table! For the best experience, it is critical that you follow

If you have any questions concerning assembly or if any parts are missing, DO NOT RETURN THE ITEM TO THE STORE

OR CONTACT THE RETAILER. Our dedicated product service experts can help! Contact Teeter Customer Service

at 80 0.847.014 3, or via online forms or Live Chat at teeter.com.

Get

Get more from your inversion sessions with TeeterLink

pain levels, get reminders and customized guidance, access support, and more! Scan the code or

search TeeterLink

®

in your app store to get started!

Assembly Instructions

Important Safety Instructions .........................1

Parts for Assembly.................................... 2

Understanding Your Inversion Table .................3

Safety Warning Labels & Product Specifications.....4

Before Beginning Assembly.......................... 5

Assembly Steps...................................6 – 12

Misassembly Check...................................13

Before Inverting ..................................... 14

Warranty Terms & Registration .......................15

®

, the FREE app that lets you usage and

TeeterLink

Owner’s Manual (attached to the equipment)

Important Safety Instructions .........................1

User Settings ......................................... 2

Prepare to Invert ...................................3 – 4

Inverting ...........................................4 – 5

Storage & Maintenance............................... 5

Get the Most out of Your Teeter ......................6

®

BEFORE YOU BEGIN: Review all steps before beginning assembly and read all precautions before using the inversion table.

Carefully adhere to the Assembly Instructions and Owner’s Manual to help ensure safety and product integrity.

READ ALL INSTRUCTIONS BEFORE USING THE INVERSION TABLE

IMPORTANT SAFETY INSTRUCTIONS

!

WARNING

FAILURE TO FOLLOW INSTRUCTIONS AND WARNINGS COULD RESULT IN SERIOUS INJURY OR DEATH.

To reduce the risk of injury:

• Read and understand all the instructions, review all other accompanying documents, and inspect the equipment before using the
inversion table. It is your responsibility to familiarize yourself with the proper use of this equipment and the inherent risks of inversion
if these instructions are not followed, such as falling on your head or neck, pinching, entrapment, equipment failure, or aggravating a
pre-existing medical condition. It is the responsibility of the owner to ensure that all users of the product are fully informed about the
proper use of the equipment and all safety precautions.

• DO NOT use until approved by a licensed physician. Inversion is contraindicated in any medical or health condition that may be
made more severe by an elevation of blood pressure, intracranial pressure or mechanical stress of the inverted position, or that may
impact your ability to operate the equipment. This may include injury or illness, but also the side effects of any drug or supplement
(prescribed or over-the-counter). Specific conditions may include, but not be limited to:

· Any condition, neurological or otherwise, which results in unexplained tingling, weakness or neuropathy, seizure, sleep disorder,
lightheadedness, dizziness, disorientation, or fatigue, or impacts strength, mobility, alertness, or cognitive ability;

· Any brain condition, such as trauma, history of intracranial bleed, history or risk of TIA or stroke, or severe headaches;

· Any condition of the heart or circulatory system, such as high blood pressure, hypertension, increased risk of stroke, or use of

anticoagulants (including high doses of aspirin);

· Any bone, skeletal or spinal cord condition or injury, such as significant spinal curvature, acutely swollen joints, osteoporosis,
fractures, dislocations, medullary pins or surgically implanted orthopedic supports;

· Any eye, ear, nasal or balance condition, such as trauma, history of retinal detachment, glaucoma, optic hypertension, chronic
sinusitis, middle or inner ear disease, motion sickness, or vertigo;

· Any digestive or internal condition, such as severe acid reflux, hiatal or other hernia, gallbladder or kidney disease;

· Any condition for which exercise is specifically directed, limited or prohibited by a physician, such as pregnancy, obesity,

or recent surgery.

• ALWAYS be certain the Ankle Lock System is properly adjusted and fully engaged, and that your ankles are secure before using
the equipment. HEAR, FEEL, SEE and TEST that the Ankle Lock System is snug, close-fitting and secure EVERY TIME you use the
equipment.

• ALWAYS wear securely tied lace-up shoes with a flat sole, such as a normal tennis-style shoe.

• DO NOT wear any footwear that could interfere with securing the Ankle Lock System, such as shoes with thick soles, boots, high-tops
or any shoe that extends above the anklebone.

• DO NOT use the inversion table until it is adjusted properly for your height and body weight. Improper settings can cause rapid
inversion or make returning upright difficult. New users, and users who are physically or mentally compromised, will require the
assistance of a spotter. Make sure the equipment is set to your unique user settings prior to each use.

• DO NOT sit up or raise head to return upright. Instead, bend knees and slide your body to the foot-end of the inversion table to
change weight distribution. If locked out in full inversion, follow the instructions for releasing from the locked position before
returning upright.

• DO NOT continue using the equipment if you feel pain or become light-headed or dizzy while inverting. Immediately return to the
upright position for recovery and eventual dismount.

• DO NOT use if you are over 6 ft 6 in (198 cm) or over 300 lbs. (136 kg). Structural failure could occur or head/neck may impact the
floor during inversion.

• DO NOT allow children to use this machine. Keep children, bystanders, and pets away from machine while in use. The inversion table
is not intended for use by persons with reduced physical, sensory or mental capabilities, unless they are given supervision and
instruction concerning use of the machine by a person responsible for their safety.

• DO NOT store the inversion table upright if children are present. Fold and lay the table on the floor. DO NOT store outdoors.

• DO NOT use aggressive movements, or use weights, elastic bands, any other exercise or stretching device or non-Teeter
attachments while on the inversion table. Use the inversion table only for its intended use as described in this manual.

• DO NOT drop or insert any object into any opening. Keep body parts, hair, loose clothing and jewelry clear of all moving parts.

• DO NOT use in any commercial, rental or institutional setting. This product is intended for indoor, home-use only.

• DO NOT operate equipment while under the influence of drugs, alcohol, or medication that may cause drowsiness or disorientation.

• ALWAYS inspect the equipment prior to use. Make sure all fasteners are secure.

• ALWAYS replace defective components immediately and/or keep the equipment out of use until repair.

• ALWAYS position equipment on a level surface and away from water or ledges that could lead to accidental immersion or falls.

• Refer to additional warning notices posted on the equipment. If a product label or Owner’s Manual should become lost, damaged or

illegible, contact Customer Service for replacement.

®

SAVE THESE INSTRUCTIONS

1

Parts for Assembly

DESCRIPTION

REV.DATE

APP.DATE

APPROVED

9

8

C

A

B

D

E

7

8

9

F

G

H

REV.

DESCRIPTION

REV.DATE

APP.DATE

APPROVED

C

B

D

6

5

4

3

9

8

7

C

A

B

D

E

3

4

5

6

7

8

9

F

G

H

Parts vary by model (noted) and are not shown to scale. Hardware drawings located on the insert inside each Hardware Kit.

ITEM NO. ITEM NAME

™

Stretch-and-Grip

A-Frame Base Assembly

E61100 A-Frame
F51007 Angle Tether
F51008

EZ Angle Tether

(X1) pre-assembled to A-Frame

(X2, X3) pre-assembled to

A-Frame

Handle Assembly

™

E61500 Stretch Assist

Handles (2) (X1)

E61520 Stretch Max™ Handles (2) (X2, X3)
HK1008

Handle Assembly Hardware Kit

Roller Hinge Assembly

F51064B Roller Hinges (2) (X1)
TR1003B Roller Hinges w/ Traction Handles (2) (X2, X3)

FitSpine™ Table Bed Assembly

™

EX1300 FitSpine

Table Bed

HK1010 FitSpine™ Table Bed Hardware Kit

Stretch-and-Grip™ A-Frame

with pre-assembled Angle Tether

Base Assembly

Use with Handle Assembly

ITEM NO. ITEM NAME

Main Shaft Assembly

EX1600 with T-Pin Ankle Lock System
EX1630 with EZ-Reach™ Ankle Lock System (X2)
EX1620 with Deluxe EZ-Reach™ Ankle Lock System (X3)

Optional Accessories

EX1800 Head Pillow

Tools Provided for Assembly

IA1149 5mm Allen Wrench (1)
EP1128A 6mm Allen Wrench (1)
F51088 Open-Ended Wrench (1)

Product Support

X1130 Owner’s Manual
X1230 Owner’s Manual (X2)
X1330 Owner’s Manual (X3)

Handle Assembly

Hardware Kit (HK1008)

(X1)

(X1)

Pre-assembled

to A-frame

Roller Hinge Assembly

E61100

F51064B (X1)

E61520 (X2, X3)

Main Shaft Assembly

EZ-Reach™

Ankle Lock System

(X2 Model Only)

TR1003B (X2, X3)

Deluxe EZ-Reach
Ankle Lock System

(X3 Model Only)

™

F51007 (X1)
F51008 (X2, X3)

E61500 (X1)

T-Pin

Ankle Lock System

(X1 Model Only)

FitSpine™ Table Bed Assembly

Use with Table Bed Hardware Kit (HK1010)

EX1600

EX1630

EX1300

Optional Head Pillow

2

EX1800

Tools Provided for Assembly

5mm Allen Wrench

IA1149

6mm Allen Wrench

EP1128A

Open-Ended Wrench

F51088

Product Support

Owner’s Manual

X1130 (X1)
X1230 (X2)
X1330 (X3)

EX1620

Understanding Your Inversion Table

Before reading further, study the drawing below to familiarize yourself with the

important components of your Teeter Inversion Table.

1

2

3

6

4

5

7

Located on

back of table

bed.

8

13

14

9

10

12

11

16

Identifying Parts and Components

1 Head Pillow

2 Upper Support Arms

™

3 FitSpine

Table Bed

4 Pivot Pins

5 Hinge Plates

6 Self-Locking Hooks

7 3-Hole Roller Hinges

8 Handles

9 Height-Selector Locking Pin

10 Spreader Arms

11 Angle Tether

12 Crossbar

15

17

The X1 is shown here.

Your actual model may vary.

13 A-Frame

14 Main Shaft

15 Ankle Lock System

16 Ankle Comfort Dial

™

17 Non-Skid Stability Feet

3

Safety Warning Labels & Product Specifications

Important: Please review all labels and supporting materials before using your inversion table.

This drawing indicates the locations of the warning labels found on your product. If a label is missing, illegible or is removed,
contact Teeter Customer Service to request a complimentary replacement label.

Note: Image and labels below not shown at actual size.

60.5 in (153.7 cm)

28.8 in (73.2 cm)

Assembled Non-Use Dimensions: 58.0 (L) x 28.8 (W) x 60.5 in (H) (147.3 x 73.2 x 153.7 cm)
Maximum In-Use Dimensions: 81.0 (L) x 28.8 (W) x 86.5 in (H) (205.7 x 73.2 x 219.7 cm)
Storage Dimensions: 20.0 (L) x 28.8 (W) x 66.0 in (H) (50.8 x 73.2 x 167.6 cm)

Weight

X2: 64.4 lb (29.2 kg)
X3: 65.8 lb (29.8 kg)

(approx.): X1: 59.3 lb (26.9 kg)

4

58.0 in (147.3 cm)

The X1 is shown here.

Your actual model may vary.

Before Beginning Assembly

Unpack and Prepare Your Workspace

• If possible, assemble the equipment at or near the space in which you intend to use it to avoid moving it later.

• Unpack all parts and support materials. Set aside packing materials and clear your work area.

• Locate the Hardware Kits packaged with the manuals. They are labeled to correspond with the assembly process.

• The Getting Started Video Portal at teeter.com/videos provides step-by-step instruction on how to assemble your product.
You may find it helpful to follow along with the videos by watching them on either your phone, tablet, or computer.
The videos include important use instructions such as:

• Assembly - Follow step-by-step instruction on how to assemble your Teeter

• User Settings - Personalize your inversion experience by adjusting four customizable settings.

• How to Invert - Learn how to test your balance and rotation control, and how to properly invert and return upright.

• Dismounting - Learn how to properly dismount your Teeter according to your specific model.

• Storage & Maintenance - When not in use, store your Teeter easily and compactly.

• Dismounting - Learn how to properly dismount your Teeter according to your specific model.

• Accessories - Learn more about the accessories available for your Teeter.

• BONUS Healthy Back and Body Routines*
Get guided instruction on stretches and exercises you can do on your own to help strengthen
your back and gain flexibility. Access this exclusive bonus content at teeter.com/videos with
the password: healthyback.

*Not available in French or Spanish.

Making Assembly Even Easier with

For step-by-step, 3D interactive instructions, download BILT (a FREE mobile app) to your
smartphone to follow along. Simply download the BILT app by scanning the QR code below
and then search for your model (Teeter X1, X2, X3) within the BILT app to get started!

5

For X1 Models

STEP 1

Assemble A-Frame Base & Stretch Assist Handles

FIGURE 1

RIGHT

1

2

FRONT

1 - Spreader Arms 2 - Crossbar

FIGURE 2

REAR

LOCKED

LEFT

FIGURE 1a

UNLOCKED

(X1 Models)

• On a level surface, position the A-Frame so that it is standing upright
and the Stability Feet are on the ground.

• Gently push down on the Spreader Arms to ensure they are fully open
and in the “locked” position (Figure 1).

• Look for temporary circular assembly assistance labels on the
A-Frame. RIGHT, LEFT, FRONT, and REAR indicate your position while
using the equipment, not facing it. These labels can be removed easily
upon completion of assembly.

• Locate the Handle Assembly Hardware Kit (HK1008).

• Determine the left or right handles, marked with an embossed L / R
on the inside of the black plastic part of each handle.

• Align the black plastic part of the corresponding handle (left / right)
over the outside edge of the Hinge Plate on the A-Frame (Figure 2).

• Insert and loosely hand-tighten three of the Allen Head Screws
through the Hinge Plate into the handle (Figure 3).

FIGURE 3

• Repeat with other handle. Tighten all fasteners with the
5mm Allen Wrench provided, being careful not to over-tighten.

• Proceed to Page 8 for Step 2.

6

For X2 & X3 Models

STEP 1

Assemble A-Frame Base & Stretch Max Handles

(X2 or X3 Models)

• On a level surface, position the A-Frame so that it is standing upright
and the Stability Feet are on the ground.

• Gently push down on the Spreader Arms to ensure they are fully open
and in the “locked” position (Figure 4).

• Look for temporary circular assembly assistance labels on the
A-Frame. RIGHT, LEFT, FRONT, and REAR indicate your position while
using the equipment, not facing it. These labels can be removed easily
upon completion of assembly.

• Locate the Handle Assembly Hardware Kit (HK1008).

• Determine the left or right handles, marked with an embossed L / R
on the inside of the black plastic part of each handle.

• Position the lower handle portion of the corresponding handle
(left / right) at the rear junction of the A-frame leg and Spreader
Arm (Figure 5 & 5a). The Lower Handle Bolt with Spacer has been
assembled loosely so that you will be able to seat the U-shaped
portion of the lower handle over the Spacer in between the
Spreader Arm and the A-frame leg. Do not tighten the bolt yet.

• Keeping the lower handle portion seated onto the Spacer, align the
upper handle portion’s black plastic part over the outside edge of the
Hinge Plate on the A-Frame (Figure 6 & 6a).

FIGURE 4

RIGHT

1

2

FRONT

1 - Spreader Arms 2 - Crossbar

FIGURE 5

REAR

LOCKED

LEFT

FIGURE 4a

UNLOCKED

FIGURE 5a

• Insert and loosely hand-tighten three of the Allen Head Screws
through the Hinge Plate into the handle (Figure 7).

• Now tighten the Lower Handle Bolt using the 5mm Allen Wrench
and Open Wrench provided, ensuring that it is fully secured but not
over-tightened (Figure 8).

• Finally, tighten the Allen Head Screws for the upper handle using
the 5mm Allen Wrench provided.

• Repeat these steps on the other handle.

FIGURE 6

FIGURE 6a

FIGURE 7 FIGURE 8

7

For All Models

FIGURE 9

Support Beam

1

Upper Support Arms

2

FIGURE 10

STEP

2

Assemble Table Bed

• Locate the Table Bed Assembly Hardware Kit (HK1010).

• Place the Table Bed face down on the floor and push down on the

1

2

Support Beam, so the two holes align evenly with the holes at the
base of the Upper Support Arms (Figure 9). You may have to exert
extra pressure to ensure that the Support Beam slides over the
rubber spacers.

• Insert the two Bolts into the open holes (Figure 10).

• Thread a Washer and Nut onto each Bolt and hand-tighten.

• Using the 6mm Allen Wrench to steady the bolts, tighten the Nuts
onto the Bolts with the 10/13mm Open-Ended Wrench.

8

For All Models

STEP

Assemble Roller Hinges to Table Bed

NOTE: Some models come with Traction Handles pre-assembled to
the Roller Hinges. The assembly instructions detailed below still apply.

• Familiarize yourself with the 3-Hole Roller Hinge and Cam Lock
terms (Figure 11).

!

WARNING

NEVER disassemble the Roller Hinge Pivot Pin.

ALWAYS insert the 3-Hole Roller Hinge (with the Pivot Pin on top

and facing out) in the same direction as the arrow label located

inside of the Cam Lock for proper assembly.

• For ease of assembly, rest the Table Bed against the Crossbar
(Figure 12) at the front of the A-Frame.

3

FIGURE 11

Pivot Pin

FIGURE 12

UNLOCKED

Bracket Pin

Bracket

LOCKED

Cam Lock

• On one side of the Table Bed, lift and hold the Cam Lock up all
the way to unlock (Figure 13).

• In your other hand, hold one Roller Hinge near the Pivot Pin.
With the Pivot Pin facing out (away from the Table Bed), slide the
bottom of the Roller Hinge between the Cam Lock and the Bracket

in the same direction as the arrow label located inside of the Cam Lock.

TIP: Make sure that the Cam Lock is completely open when inserting

the Roller Hinge, otherwise assembly will be more difficult.

• Engage one of the holes in the Roller Hinge over the Bracket Pin.
Figure 13 shows the Roller Hinge installed correctly, with the
Bracket Pin engaged in Setting C.

NOTE: Refer to the Owner’s Manual for an explanation of the hole
settings. If you are unsure, use Setting C to start.

• Push down on the Cam Lock (Figure 14) to lock it and secure the
Roller Hinge.

• Repeat on other side. Make sure the Roller Hinges are in the
same hole setting on both sides.

FIGURE 13

FIGURE 15

UNLOCK

FIGURE 14

LOCK

The X1 is shown here. Your actual model may vary.

C

B

A

9

For All ModelsFor All ModelsFor All ModelsFor All Models

FIGURE 16

FIGURE 17

FRONT

STEP

4

Assemble Table Bed to A-Frame

• Face the front of the A-Frame where the Crossbar is located (Figure 16).

• Grasp both Roller Hinges, right above the Cam Lock, and lift the
Table Bed. Allow the top of the Table Bed to rotate toward the floor,
so that the back of the Table Bed is now facing you and the top of the

REAR

Table Bed is in front of the Crossbar (Figure 17).

• Lower each Roller Hinge Pivot Pin into the A-Frame hinge plates, one
side at a time (Figure 16). The Self-Locking Hooks will open to allow the
Pivot Pin into the Hinge Plate slot, then automatically snap closed
over the Pivot Pin.

TIP: You may need to push outward on the Hinge Plate in order for
the second Pivot Pin to lock in place.

• Make sure that each Pivot Pin is seated at the base of the slot in the
Hinge Plates, and that the Self-Locking Hooks have closed over both
Pivot Pins (Figures 18a & 18b).

FIGURE 18

FIGURE 19

FIGURE 18a

TOP VIEW

FIGURE 18b

INSIDE VIEW

!

WARNING

Failure of the Self-Locking Hooks to close over both Roller Hinge

Pivot Pins is an indication of improper assembly and if not corrected

could result in serious injury or death!

• Rotate the Table Bed into the use position (Figure 19). Ensure that
it rotates smoothly. See also Image A on Page 13 to ensure
correct assembly.

10

The X1 is shown here. Your actual model may vary.

For All Models

STEP

Assemble Main Shaft to Table Bed

• Your model’s Main Shaft may differ from what is shown in the
figures, however the assembly instructions remain the same.

• Facing the front of the A-Frame, hold the Main Shaft in your left hand
with the height markings facing up. Slide the end of the Main Shaft
into the Main Shaft Housing (Figure 20), located at the base of the
Table Bed.

• With your right hand, pull out the Height-Selector Locking Pin
(Figure 19) to allow the Main Shaft to slide in further and release
in the desired height setting. Refer to the Owner’s Manual for more
information on selecting your height setting.

• The Main Shaft MUST REST against the Crossbar bumper on the
A-Frame (Figure 22).

IMPORTANT: The Crossbar prevents the Table Bed from rotating
forward when the user steps on the Ankle Comfort Dial. If the
Main Shaft does not rest on the Crossbar bumper as shown in
Figure 22, then the Table Bed has been assembled backwards
onto the A-Frame.

5

FIGURE 20

FIGURE 21

This MUST BE CORRECTED before use. See also Image B on Page 13
to ensure correct assembly.

• Test the inversion table by hand for smooth and steady rotation
(Figure 23) and ensure that all fasteners are secure.

FIGURE 22

FIGURE 23

The X1 is shown here. Your actual model may vary.

11

For All Models

FIGURE 24

STEP

6

Attach Angle Tether & Head Pillow

Attach Angle Tether

• The tether will come pre-assembled to the A-Frame.

• Unfold the adjustable tether and clip it to the U-Bar on the
underside of the Table Bed (Figure 24).

• Slide the buckle to lengthen or shorten the strap depending on
your desired maximum angle of inversion.

SHORTEN

LENGTHEN

EZ-Angle Tether Accessory

Some models may come with the EZ-Angle Tether, embroidered
with color-coded angle markers at 20° (GREEN), 40° (ORANGE),
or 60° (RED). Simply slide the buckle so its center aligns with your
desired color setting.

12

FIGURE 25

Attach Head Pillow

Attach the Head Pillow by securing the Velcro Straps through the
specified holes in the Table Bed (Figure 25), which allow the pillow
to shift with the user when in use. You may also customize the
position depending on your preference.

The X1 is shown here. Your actual model may vary.

Misassembly Check

!

WARNING

If your Teeter Inversion Table looks like either of these images, your inversion table has

been misassembled and is unfit for use. Improper assembly could result in serious injury or death!

For All Models

Image A

Go back to Step 3 for instruction.

Demonstrates that the Roller Hinges have been

assembled upside down into the Table Bed

and must be corrected.

Image B

Go back to Step 4 for instruction.

Demonstrates that the Table Bed has been

assembled into the A-Frame backwards so the

Main Shaft is not resting on the Crossbar and must be corrected.

The X2 is shown here. Your actual model may vary.

13

For All Models

Before Inverting

FIGURE 26

FIGURE 26a

Ensure Owner’s Manual is Attached

The Owner’s Manual contains important information on how to use
your Teeter Inversion Table, including how to personalize the user
settings, properly secure and release the Ankle Lock System, and test
and adjust the rotation control.

• If not already attached, thread the provided metal chain through
the pre-punched hole in the upper corner of the Owner’s Manual.

• Secure the chain to the A-Frame through the designated hole in the
Hinge Plate (Figure 26 & 26a). Allow the Owner’s Manual to hang freely
on the outside of the A-Frame Spreader Arms so it doesn’t interfere
with the rotation of the Table Bed.

IMPORTANT: Once attached to the A-Frame, DO NOT remove the
Owner’s Manual. It should remain permanently attached to your
inversion table to serve as a reference for all users in regards to proper
adjustment and use of the equipment.

!

WARNING

Read the Owner’s Manual thoroughly before using your

Teeter Inversion Table. Improper settings could result

in serious injury or death!

Watch the Getting Started Videos

The Getting Started Video Portal is a helpful supplement to the
Owner’s Manual, with easy-to-follow instructions on user settings,
how to invert, storage and maintenance, and even stretching and
exercises you can do with your Teeter. Just go to teeter.com/videos
to access them now!

Download TeeterLink

Get more from your inversion sessions by downloading the TeeterLink®
app to your phone to track usage and pain levels, get reminders and
customized guidance, access support, and more! Scan the code or
search TeeterLink

®

in your app store to get started!

®

14

The X1 is shown here. Your actual model may vary.

The Teeter warranty set forth below and on Teeter.com applies to the Inversion Table only. Accessories may come with their

FULL 5 YEAR WARRANTY

own terms. This warranty applies to US and Canadian customers only. For international customers, please consult your
local distributor for warranty information which will vary depending on country.

During the period starting with the day of retail purchase and continuing for five (5) years,

FULL

YEAR

5

W

A

Handling and transportation costs related to product warranty service only are covered by this warranty. This warranty does
not cover damage resulting from improper handling, assembly, or installation, repairs made by others, accident, misuse,
or abuse. Under no circumstances shall Teeter, or any other party involved in the sale of this product, have any liability for
incidental or consequential damage arising from breach of an express or implied warranty on any Teeter product.

EXCEPT AS SET FORTH ABOVE, NO WARRANTY IS GIVEN WITH RESPECT TO ANY TEETER PRODUCT, AND ALL
EXPRESS WARRANTIES ARE DISCLAIMED. This warranty shall be governed by the laws of the State of Washington, USA.

To the extent this warranty is found not to be enforceable, it shall be deemed revised to the extent necessary to make it
enforceable. Any controversy or claim arising out of or relating to this warranty, its interpretation, or any alleged breach
thereof, which cannot be amicably settled between Teeter and the owner within sixty (60) days of written notice by the
aggrieved party to the other, shall be finally settled by arbitration submitted to three (3) arbitrators selected from the
panels of the arbitrators of the American Arbitration Association located closest to Teeter’s principal place of business.

Y

T

N

R

A

R

Teeter extends to the owner a repair and replacement warranty against manufacturing defects
in materials, workmanship, fabrics and padding. Teeter will repair or replace any such defect
and will pay the costs of all parts, labor and transportation. If a repair or replacement is not
commercially practical or cannot timely be made, then Teeter will, at the original Purchaser’s
option, replace with a comparable product or refund the purchase price.

Some states do not allow the exclusion of incidental or consequential damage from a warranty, so the above limitation or
exclusion may not apply to you. Some states do not allow limitations on how long an implied warranty lasts, so the above
limitation may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which may
vary from state to state. This warranty is completely transferable to any and all future owners of this product, provided no
alterations have been made to the product.

HOW TO SUBMIT YOUR REGISTRATION:

Step 1

Fill out this information for your own records.

Step 2

Go online to teeter.com to register your warranty.

Date of Purchase

Product & Model

Dealer Name

Serial No.

If you are unable to go online, you can request a warranty card to be mailed to you by calling Customer Service at 800-847-

0143.

Please DO NOT mail this to Teeter.

PLEASE RETAIN THIS FOR YOUR RECORDS

15

This product is Listed by
Underwriters Laboratories Inc.
Representative samples of this
product have been evaluated
by UL and meet applicable
safety standards.

This product is Listed by

Underwriters Laboratories Inc.

Representative samples of this

product have been evaluated

by UL and meet applicable

safety standards.

This product is Listed by
Underwriters Laboratories Inc.
Representative samples of this
product have been evaluated
by UL and meet applicable
safety standards.

Find These Great Products and More at teeter.com!

Use promo code SAVETODAY for 10% off at checkout*

T3™ Massager

Countless options for self-massage,
trigger point therapy, and myofascial
release to resolve tension and pain
gently and naturally.

Better Back™ Foam Rollers

Prepare the body for movement,
accelerate recovery, minimize
muscular imbalances, and improve
overall flexibility with the Teeter
collection of textured Foam Rollers.

Better Back™ Vibration Cushion

Transform your Teeter Inversion Table to
help revive tired, sore muscles. Features
10 vibrating massage motors, neck
support with light-heat technology, and
LCD remote control.

P2™ Back Stretcher

Apply gentle, user-controlled
traction to allow the lower back
to decompress, reduce nerve
pressure, and relax tense muscles.

Neck Relax & Restore Duo

™

Provides support of the upper
neck/cervical spine for
self-administered suboccipital
release, a technique to reduce tension

in the supporting muscles.

reNEW™ Muscles Pain
Relieving Cream

Deeply penetrates sore and aching
muscles on contact. Specially
formulated with emu oil, arnica,
MSM, and glucosamine.

Inversion Program Mat

Enhance your inversion experience
with 24 illustrated stretches and
exercises right at your fingertips.
Provides non-skid protection for
hard floors. 36” x 60”.

If you have any trouble assembling the equipment, or questions
about its use, please contact customer service.

USA: 800-847-0143 or [e-mail]
International: [e-mail]

USA: Teeter
9713 233rd Avenue East
Bonney Lake, WA 98391

Toll Free: 800-847-0143
Fax: [phone]

teeter.com | [e-mail]

Teeter Decompression Devices are multiple user, reusable devices for home use, intended to provide traction to the spine while stretching the para-spinal muscles and soft tissues.

Use of the Teeter Decompression Devices is indicated for the following conditions: back pain, muscle tension, degenerative disc disease, spinal degenerative joint disease, spinal stenosis,

U.S. and Foreign Patents Apply. Teeter and Teeter logo are registered trademarks of Teeter. Specifications subject to change without notice.

International: Teeter International, Ltd.
Gor-Ray House
758 Great Cambridge Rd
Enfield
Middlesex EN1 3GN
United Kingdom

teeterintl.com | [e-mail]

The devices provide non-powered traction and are meant for use by adults.

herniated disc, spinal curvature due to tight muscles, sciatica, muscle spasm, and facet syndrome.

© COPYRIGHT 2019 Teeter. International Law Prohibits Any Copying. X1040C 0119-0

FreeStep™
Recumbent Cross Trainer

Zero-impact cardio and strength!
The ONLY home-use machine with
patented smooth-stride technology
found in high-end seated
physiotherapy steppers.

Any modification to this device will void the UL Listing.

EC

Medical Device Safety Service
GmbH
Schiffgraben 41
30175 Hannover
Germany
Tel. [phone]

REP

This product is Listed by

Underwriters Laboratories Inc.

Representative samples of this

product have been evaluated

by UL and meet applicable

safety standards.