Teco F510 Catalog Page

F510

APPLICATIONS:

FEATURES:

Fan & Pump

A versatile AC Drive that is easily configures and handle almost any fan,

blower, or centrifugal pump application.

■ Fans ■Centrifugal Pumps

■ Blowers ■ HVAC Industries

■ Water and Wastewater Industries ■ Irrigation

■ Control Modes for V/F, Sensorless Vector, Sensorless Vector with permenent Magnet Motor

■ Application Macros for Quick Start Up: Macros Available for: Fans, Pumps , HVAC

■ Built-in PLC as Standard

■ Operation and Engineering units standard

■ LCD Keypad with Remote Mounting Capabilities

■ PID Control with advanced diagnostics and sleep mode

■ 5 to 150 HP (Variable Torque), 230V, 50/ 60Hz,, 3-Phase

■ 5 to 250 HP (Variable Torque), 460V, 50/ 60Hz, 3-Phase

■ Plenum rated

■ Diagnostics Registers for Troubleshooting

■ Flexible Input/ Output Configurations that Incorporate Normally Open or Normally Closed Signals

■ 0 to 400 Hz Speed Range

■ Built-in Modbus, BACNet, and Metasys protocols via (RS485 or RJ45 interface)

■ Enhanced Design for Smoother and Quieter Motor Operation

■ Real Time Clock ( Standard on models with LCD keypad )

■ PTC Input available for direct thermal protection of the motor

■ Thermal Management on the Heat Sink for Overtemperature Fault Avoidance

■ Master-Follower control mode built-in

■ UL, cUL, and CE Approved

■ EMI Protection that complies with EM61800-3 with optional filter

■ EMS Protection that follows EN61800-3

EFFECTIVE: 11-17-14

EXPIRES: UFN