TECNOEKA EKF 411 UD, EKF 416 UD, EKF 411UD/001, EKF 464 UD, EKF 464 UD/001-HT Use And Instruction Manual

USE AND INSTRUCTION MANUAL

USE AND INSTRUCTION MANUALUSE AND INSTRUCTION MANUAL

USE AND INSTRUCTION MANUAL

MOD

MODMOD

MODDDDD.

. .

. EEEEKF

KF KF

KF 411

411411

411 UD

UDUD

UD –––– EKF 416 UD

EKF 416 UD EKF 416 UD

EKF 416 UD –––– EEEEKF

KF KF

KF 444466664444 UD

UDUD

UD

EKF 4

EKF 4EKF 4

EKF 411

1111

11 UD/001

UD/001UD/001

UD/001

EKF 464 UD/001

EKF 464 UD/001EKF 464 UD/001

EKF 464 UD/001----HT

HTHT

HT –––– EKF 464 UD/002

EKF 464 UD/002EKF 464 UD/002

EKF 464 UD/002----HT

HTHT

HT

rev.

rev. rev.

rev. 4444

TECNOEKA

TECNOEKATECNOEKA

TECNOEKA S.r.l.

S.r.l.S.r.l.

S.r.l.

Via

Via Via

Via Marco Polo

Marco PoloMarco Polo

Marco Polo, n.1

, n.1, n.1

, n.11111 ---- 3501

35013501

35010000 Borgoricco

BorgoriccoBorgoricco

Borgoricco (Padova) Italy

(Padova) Italy(Padova) Italy

(Padova) Italy

Tel. [phone]

Tel. [phone] Tel. [phone]

Tel. [phone] –––– +39.

+39.+39.

+39.049.5791

049.5791049.5791

049.5791479 Fax [phone]

479 Fax [phone] Fax [phone]

479 Fax [phone]

www.tecnoeka.com

www.tecnoeka.comwww.tecnoeka.com

www.tecnoeka.com

EEEE----mail:

mail: mail:

mail: [e-mail]

[e-mail]

[e-mail]

TECNOEKA Srl ________________________________________________________________use and instruction manual

page 2 ____________________________________________________________________________________________

CE

DECLARATION OF CONFORMITY

Annexed document II A, of directive 2006/42/EC

Annexed document II A, of directive 2006/42/ECAnnexed document II A, of directive 2006/42/EC

Annexed document II A, of directive 2006/42/EC

Manufacturer’s name TECNOEKA Srl

TECNOEKA SrlTECNOEKA Srl

TECNOEKA Srl

Manufacturer’s address Via

Via Via

Via Marco Polo

Marco PoloMarco Polo

Marco Polo, 1

, 1, 1

, 11111 ---- 3501

35013501

35010000 Borgoricco

BorgoriccoBorgoricco

Borgoricco (PD)

(PD)(PD)

(PD)

Manager’s name of technical file Minotto Lorenzo

Minotto LorenzoMinotto Lorenzo

Minotto Lorenzo

Manager’s address of technical file Via

Via Via

Via Marco Polo

Marco PoloMarco Polo

Marco Polo, 1

, 1, 1

, 11111 ---- 3501

35013501

35010000 Borgoricco

BorgoriccoBorgoricco

Borgoricco (PD)

(PD)(PD)

(PD)

Type of product Electroni

ElectroniElectroni

Electronic oven

c ovenc oven

c oven

Purpose of the product Cooking food

Cooking foodCooking food

Cooking food

Model EEEEKF

KF KF

KF 411 UD

411 UD 411 UD

411 UD –––– EKF 416 UD

EKF 416 UD EKF 416 UD

EKF 416 UD ---- EKF 464 UD

EKF 464 UDEKF 464 UD

EKF 464 UD

EKF

EKF EKF

EKF 444411

1111

11 UD/001

UD/001UD/001

UD/001

EKF 464 UD/001

EKF 464 UD/001EKF 464 UD/001

EKF 464 UD/001----HT

HTHT

HT –––– EKF 464 UD/002

EKF 464 UD/002EKF 464 UD/002

EKF 464 UD/002----HT

HTHT

HT

TECNOEKA Srl declares that the mentioned above products meet the following safety
regulations:

Low voltage directive 2006/95/CE
Electromagnetic compatibility Directive 2004/108/CE.

TECNOEKA Srl declares that the mentioned above products meet the following harmonised
standards:

CEI EN 60335-1 ; CEI EN 60335-2-42
CEI EN 55014-1 ; CEI EN 61000-3-2 ; CEI EN 61000-3-3 ; CEI EN 62233

TECNOEKA Srl declares that the mentioned above products meet the following directives:

Machine Directive 2006/42/CE;
Directive on the general safety of products 2001/95/CE;
Directive on the restriction in the use of dangerous substances in electrical and electronic

appliances 2011/65/CE ;
Directive on waste from electrical and electronic appliances 2002/96/CE (RAEE).

TECNOEKA Srl declares that the mentioned above products meet the
CE 1907/2006 (REACH) Regulation

Borgoricco, 21/01/2015.

________________

________________________________

________________________________

________________________________

________________

Signature of a Representative of the Board of directors

(CRISTINA LORA)

X:\Sgq\PRODOTTI\1 - FORNI\FORNO ELETTRICO\LEka\MANUALI D'USO - Forno Elettrico 40 60 90 - LEka\Lingua

Inglese\NUOVA GAMMA EF\Instruction manual EKF 411 UD - EKF 416 UD - EKF 464 UD - EKF 464 UD_001-HT -

EKF 464 UD_002-HT- GB - rev. 3.doc

Electric Ovens rev. 4______________________________EKF 411 UD – EKF 416 UD – EKF 464 UD – EKF 411 UD/001
EKF 464 UD/001-HT – EKF 464 UD/002-HT

____________________________________________________________________________________________ page 3

Index

IndexIndex

Index

1.

1.1.

1. Technical service

Technical serviceTechnical service

Technical service

2.

2.2.

2. General warnings

General warningsGeneral warnings

General warnings

3.

3.3.

3. Technical specifications

Technical specificationsTechnical specifications

Technical specifications

4.

4.4.

4. Instructions for the installer

Instructions for the installerInstructions for the installer

Instructions for the installer

5.

5.5.

5. Use instructions (for the user)

Use instructions (for the user)Use instructions (for the user)

Use instructions (for the user)

6.

6.6.

6. Residual risk

Residual riskResidual risk

Residual risks (for the user)

s (for the user)s (for the user)

s (for the user)

7.

7.7.

7. How to use the control panel

How to use the control panelHow to use the control panel

How to use the control panel

8.

8.8.

8. Oven cooking

Oven cookingOven cooking

Oven cooking

9.

9.9.

9. Cooking advice

Cooking adviceCooking advice

Cooking advice

10.

10.10.

10. Routine cleaning and maintenance

Routine cleaning and maintenanceRoutine cleaning and maintenance

Routine cleaning and maintenance

11.

11.11.

11. Technical

Technical Technical

Technical assistance

assistanceassistance

assistance

12.

12.12.

12. Informations to the consumers

Informations to the consumersInformations to the consumers

Informations to the consumers

13.

13.13.

13. Wiring layout

Wiring layoutWiring layout

Wiring layoutssss

14.

14.14.

14. The Warranty

The WarrantyThe Warranty

The Warranty

15.

15.15.

15. Availability and supply of spare parts

Availability and supply of spare partsAvailability and supply of spare parts

Availability and supply of spare parts

TECNOEKA Srl ________________________________________________________________use and instruction manual

page 4 ____________________________________________________________________________________________

1.

1. 1.

1. Technica

TechnicaTechnica

Technical service

l servicel service

l service

A technical check-up once or twice a year helps prolong the life of the appliance and guarantees
better operation. Make sure that assistance is carried out solely and exclusively by qualified
personnel. For any spare parts orders or for any information about the appliance, always mention
the serial number and model (data indicated on the "technical data" plate at the rear of the
oven).

2222.

. .

. General warnings

General warningsGeneral warnings

General warnings

Very important!: keep this instruction book together with the appliance for future consultation.
These warnings were drafted for your safety and for that of others. Please read them carefully
before installing or using the appliance:

- If, on receipt of the goods, the packaging

packagingpackaging

packaging is damaged, write the following on the delivery

note: “I REVERSE THE RI

“I REVERSE THE RI“I REVERSE THE RI

“I REVERSE THE RIGHT TO CONTROL THE GOODS”

GHT TO CONTROL THE GOODS”GHT TO CONTROL THE GOODS”

GHT TO CONTROL THE GOODS”, specify the damage and get the
driver to sign in acceptance; send a claim in writing to the seller within 4 calendar days
from the date of receipt. No claim shall be accepted after such period.

- The warehouse inside temperature must not be lower than -9°C; otherwise, the
thermostat (regulation and safety thermostat) control devices of the machine will be
damaged. Failure to observe this prohibition invalidates any responsibility of the
manufacturer of the machine.

- The appliance is intended for professional use and must be utilised by qualified personnel
trained to use it.

- Any modification which may be necessary on the electrical system to enable installation of
the appliance, must be carried out solely by competent personnel.

- It is dangerous to modify or attempt to modify the characteristics of this appliance.

- Never clean the appliance with direct water jets, because, if any water enters, it could limit
the machine's safety .

- Before doing any maintenance or cleaning jobs, disconnect the appliance from the
electrical mains and allow it to cool.

- When the tilting door is wide open, do not put anything on the surface, because the door
hinges could be irreparably damaged.

- Do not attempt to carry out the periodic controls or any repairs by yourself. Contact the
nearest Service Centre and use only original spare parts.

N.B.:

N.B.: N.B.:

N.B.: Improper or incorrect use and failure to observe the installation instructions shall release the

Improper or incorrect use and failure to observe the installation instructions shall release the Improper or incorrect use and failure to observe the installation instructions shall release the

Improper or incorrect use and failure to observe the installation instructions shall release the
manufacture from all responsibility.

manufacture from all responsibility.manufacture from all responsibility.

manufacture from all responsibility. In this connection, the directives

In this connection, the directives In this connection, the directives

In this connection, the directives in the "POSITIONING"

in the "POSITIONING" in the "POSITIONING"

in the "POSITIONING"

paragraph must be strictly observed.

paragraph must be strictly observed.paragraph must be strictly observed.

paragraph must be strictly observed.

3.

3. 3.

3. Technical specifications

Technical specificationsTechnical specifications

Technical specifications

Dimensions of appliance LxDxH (mm)

Dimensions of appliance LxDxH (mm)Dimensions of appliance LxDxH (mm)

Dimensions of appliance LxDxH (mm)

790x665x635

Weight (Kg)

Weight (Kg)Weight (Kg)

Weight (Kg)

56

Convection heating element (kW)

Convection heating element (kW)Convection heating element (kW)

Convection heating element (kW)

3

Grill heating

Grill heatingGrill heating

Grill heating

----

element (kW)

element (kW)element (kW)

element (kW)

/

Max. absorbed power (kW)

Max. absorbed power (kW)Max. absorbed power (kW)

Max. absorbed power (kW)

6,4

Power sup

Power supPower sup

Power sup

ply voltage (V)

ply voltage (V)ply voltage (V)

ply voltage (V)

400 2N (50 or 60Hz on request) 230 V (50 or 60Hz on request)

Power cable diameter

Power cable diameterPower cable diameter

Power cable diameter

4x2,5 mm2

3x4 mm

2

(EKF 464 UD/001-HT – EKF 411 UD/001)

Type of cable

Type of cableType of cable

Type of cable

H07RN

-F

Connecting electric cable

Connecting electric cableConnecting electric cable

Connecting electric cable

Tipo Y

Class

ClassClass

Class

I

Degree of protection against humidity

Degree of protection against humidityDegree of protection against humidity

Degree of protection against humidity

IPX3

Wate

WateWate

Wate

r pressure

r pressure r pressure

r pressure

(kPa)

100-200

The noise level of the appliance in operation is below 70 dB (A).

The noise level of the appliance in operation is below 70 dB (A).The noise level of the appliance in operation is below 70 dB (A).

The noise level of the appliance in operation is below 70 dB (A).
The "technical data" plate is positioned on the rear panel of the appliance.

The "technical data" plate is positioned on the rear panel of the appliance.The "technical data" plate is positioned on the rear panel of the appliance.

The "technical data" plate is positioned on the rear panel of the appliance.

Electric Ovens rev. 4______________________________EKF 411 UD – EKF 416 UD – EKF 464 UD – EKF 411 UD/001
EKF 464 UD/001-HT – EKF 464 UD/002-HT

____________________________________________________________________________________________ page 5

4.

4. 4.

4. Instructions for the installer

Instructions for the installerInstructions for the installer

Instructions for the installer

The following instructions are aimed at the qualified installer, to ensure that he carries out the
installation, adjustment and maintenance operations as correctly as possible and according to
current legal regulations. Any operation must be performed with electrical power cut to the
appliance. Before using the appliance, carefully remove the special adhesive film protecting the
parts in stainless steel. Do not leave any glue residues on the surfaces. If necessary, remove them
at once, with an appropriate solvent.

Fitting the feet

Fitting the feetFitting the feet

Fitting the feet - The feet are inside the appliance and must be secured on the four threaded
holes on the base. If necessary, the height of the feet can be adjusted by screwing or unscrewing.

Positioning

PositioningPositioning

Positioning - Position the appliance perfectly horizontally on a table or similar support (the table
or support must be at least 85 cm above the floor). Position it at a distance of not less than 10
cm from the side and rear walls, to enable natural ventilating air to circulate freely around it. The
appliance is ventilated through specific openings on the metal walls of the outer housing , and
ensures efficiency and long-life. For this reason it is strictly forbidden to obstruct these ventilation
openings, even partially or for short periods. Failure to observe this specific prohibition releases

Failure to observe this specific prohibition releases Failure to observe this specific prohibition releases

Failure to observe this specific prohibition releases

the manufac

the manufacthe manufac

the manufacturer of the appliance from all responsibility and immediately voids any guarantee

turer of the appliance from all responsibility and immediately voids any guarantee turer of the appliance from all responsibility and immediately voids any guarantee

turer of the appliance from all responsibility and immediately voids any guarantee

rights for the said appliance,

rights for the said appliance, rights for the said appliance,

rights for the said appliance, because its constructive conformity has been voluntarily
compromised. Furthermore, the appliance is not suitable for embedding and for grouped
positioning with other identical appliances.

Electrical connection

Electrical connectionElectrical connection

Electrical connection - The appliance must be connected to the electrical mains according to
current legal regulations. Before making the connection, make sure of the following:

- the voltage and frequency values of the power supply system match the values on the
"technical data" plate affixed on the appliance;

- the limiting valve and the system are able to support the appliance's load (see the
"technical data" plate);

- the power supply system has an adequate earth

the power supply system has an adequate earththe power supply system has an adequate earth

the power supply system has an adequate earth connection according to current legal

connection according to current legal connection according to current legal

connection according to current legal

regulations;

regulations;regulations;

regulations;

- a omnipolar switch with minimum between-contacts aperture of 3 mm, sized to the load
and conforming to current legal regulations, is fitted between the appliance and the mains
in the direct connection to the mains;

- the omnipolar switch used for connection is easy to reach when the appliance is installed;

- the yellow/green earth wire is not interrupted by the switch;

the yellow/green earth wire is not interrupted by the switch;the yellow/green earth wire is not interrupted by the switch;

the yellow/green earth wire is not interrupted by the switch;

- the power supply, when the appliance is operating, must not deviate from the rated
voltage value by ±10%;

- make sure that after inserting the power supply cord into the terminal block it does not
come into contact with any of the cooking range's hot parts.

- if the supply cable is damaged then it must be replaced by the manufacturer or by your

if the supply cable is damaged then it must be replaced by the manufacturer or by your if the supply cable is damaged then it must be replaced by the manufacturer or by your

if the supply cable is damaged then it must be replaced by the manufacturer or by your
techn

techntechn

technical support or by a qualified person to avoid any risk.

ical support or by a qualified person to avoid any risk.ical support or by a qualified person to avoid any risk.

ical support or by a qualified person to avoid any risk.

Connection to the water mains

Connection to the water mainsConnection to the water mains

Connection to the water mains - The appliance must be fed with softened drinking water, with
hardness from 0.5°F to 5°F (it is obligatory to use a softener to reduce the formation of lime
inside the cooking chamber) and pressure in the range from 100 to 200 kPa (1.0 - 2.0 bar).
Connection to the water mains should be made through the threaded 3/4" solenoid-valve on the
rear (on the bottom) of the appliance, fitting in between a mechanical filter and an on/off tap
(before you connect the filter, allow a certain quantity of water to flow out in order to drain any
waste from the pipe).

TECNOEKA Srl ________________________________________________________________use and instruction manual

page 6 ____________________________________________________________________________________________

Water drainage

Water drainageWater drainage

Water drainage
A drain pipe (see Fig. 1) comes out from the rear of the appliance, to drain the oven cavity. This
pipe must be connected up to a pipe made to resist steam temperatures (90°C-100°C) with an
internal diameter of 30 mm (DN 30). To prevent choking, it is best to use a rigid pipe and make
sure there are no "elbow" bends anywhere along the drain line.
Furthermore, the drain line must slope down (minimum slope 5%) along its full length (the
length in question is from the appliance's drain pipe to the drain point and must not exceed 2
metres). The drain line must run into an open floor drain (Fig.2). In addition, there must be a free
air gap of at least 25 mm (distance between the drain line coming from the appliance and the
funnel on the drain standpipe). Whatever the case, in order to comply with current hygiene
standards, the line connected to the appliance's drain pipe must not come into direct contact
with the drain point. It is advisable to include a suitable trap in the line connecting the appliance's
drain outlet to the grey water waste system, thus stopping the steam coming back out of the
drain.

FFFFIG.

IG. IG.

IG. 1111 FIG.

FIG. FIG.

FIG. 2222

Connecting the power cable

Connecting the power cableConnecting the power cable

Connecting the power cable - To access the terminal board, just remove the appliance's rear side­panel. Loosen the cable gripper and allow the cable to pass through it. Arrange the conductors
so that the earth conductor is the last to detach from its terminal if the cable goes into a state of
faulty traction. Connect the phase

phasephase

phase conductors to the terminals marked “L1”

“L1”“L1”

“L1” and “L2”

“L2”“L2”

“L2”,

connecting the neutral

neutral neutral

neutral conductor to the terminal marked "N"

"N""N"

"N" and the earth

earthearth

earth conductor to the

terminal marked with the symbol according to the following lay-out:

(this electrical connection lay-out is located near the power supply terminal board ). Tighten the
cable gripper and re-fit the rear side-panel of the appliance.
The appliance must be connected to an equipotential system

equipotential systemequipotential system

equipotential system whose efficiency must first be

checked according to current legal regulations.

Electric Ovens rev. 4______________________________EKF 411 UD – EKF 416 UD – EKF 464 UD – EKF 411 UD/001
EKF 464 UD/001-HT – EKF 464 UD/002-HT

____________________________________________________________________________________________ page 7

This connection must be made between different appliances by using the appropriate terminal
marked with the symbol . The equipotential conductor must have a minimum diameter of 2,5
mm2 The equipotential terminal is at the rear of the appliance.
Safety thermal breaker

Safety thermal breakerSafety thermal breaker

Safety thermal breaker - The appliance has a manually reset safety thermal breaker. It protects
against excessive dangerous over-temperatures which could be accidentally generated inside the
appliance. This device is located on the back of the oven.

5.

5. 5.

5. Use instructions (for the user)

Use instructions (for the user)Use instructions (for the user)

Use instructions (for the user)

For first use, we advise you to let the appliance to run load-free at maximum temperature for
about one hour. In this way, any unpleasant smells due to thermal insulation and residual work
grease are eliminated.
This appliance must be used solely for the purpose for which it was expressly designed, i.e.
cooking foods in the oven. Any other use is considered unsuitable.
The appliance can be used: for all oven cooking of deserts, pizzas, meat, fish, vegetables, as well
as for gratinating, and for re-conditioning cooled and frozen foods.
When placing food in the cooking compartment, leave a space of at least 40 mm between pans
in order not to over-obstruct air circulation.
Do not use pans with higher than necessary edges: edges are barriers which prevent the
circulation of hot air.
Warm up the oven before every cooking operation to obtain maximum uniformity.
Do not salt foods in the cooking compartment.

6.

6. 6.

6. Residual risks (for the user)

Residual risks (for the user)Residual risks (for the user)

Residual risks (for the user)

After a cooking operation, open the door cautiously, to avoid a violent outflow of heat which
could cause burns.
While the oven is in operation, pay attention to the hot zones (marked on the appliance) of its
external surfaces.
Place the machine on a bench or similar support, at a height of at least 85 cm from the floor.
The bench or support must be able to support the weight of the machine and house it correctly.
The appliance contains electrical parts and must never be washed with a jet of water or steam.
The appliance is electrically connected: before attempting any cleaning operation, cut power to
the appliance.
To prevent incorrect connection of the appliance, the relevant electrical and water connections
are marked by identification plates.
Do not use the door handle to move the appliance (the glass panel may break).
When the tilting door is wide open, do not use the internal surface to place objects to avoid
damaging permanently the door hinges.

7.

7. 7.

7. How to use the control panel

How to use the control panelHow to use the control panel

How to use the control panel

1 2 3

TECNOEKA Srl ________________________________________________________________use and instruction manual

page 8 ____________________________________________________________________________________________

Fig.

Fig. Fig.

Fig. 3333

Fig.

Fig. Fig.

Fig. 4444

Fig.

Fig. Fig.

Fig. 5555

Programming cooking time

Programming cooking timeProgramming cooking time

Programming cooking time - To run the oven, turn the programmer knob (Fig. 3) in line with
symbol (continuous operation) or in line with the selected cooking time (up to 120 minutes). In
the second case, end of cooking is signalled by the oven switching OFF automatically.

Programming cooking temperature

Programming cooking temperatureProgramming cooking temperature

Programming cooking temperature - Turn the knob of the adjustment thermostat (Fig. 4) in line
with the temperature selected for cooking.

Programming vapour quantity

Programming vapour quantityProgramming vapour quantity

Programming vapour quantity - To generate vapour while the oven is in operation (cooking
compartment hot), turn the knob of the automatic humidifier (Fig. 5) in line with the required
value (from 1 to 5). If you turn the knob to position • (OFF) the humidifier will stop operating.

Control thermostat indicator light

Control thermostat indicator lightControl thermostat indicator light

Control thermostat indicator light - The control thermostat orange indicator light goes OFF
whenever the programmed temperature is reached inside the cooking compartment. It lights up
again when the thermostat is tripped to re-establish this temperature.

Automatic humidifier indicator light

Automatic humidifier indicator lightAutomatic humidifier indicator light

Automatic humidifier indicator light - The orange indicator light of the automatic humidifier
indicates that the water solenoid-valve is operating and, therefore, vapour is being produced in
the cooking compartment.

"End of cook

"End of cook"End of cook

"End of cooking" programmer indicator light

ing" programmer indicator lighting" programmer indicator light

ing" programmer indicator light - The programmer green indicator light indicate

that the oven is operating and that cooking time is active.

Oven internal light

Oven internal lightOven internal light

Oven internal light - The light is always on when the oven is operating.

To switch off the oven

To switch off the ovenTo switch off the oven

To switch off the oven - Turn OFF the knobs of the "end of cooking" programmer and of the
thermostat. When you have finished using the oven, shut off the water ON/OFF tap upstream of
the appliance and cut out electric power.

8888.... Oven cooking

Oven cookingOven cooking

Oven cooking

For cooking, before putting food in, warm up the oven to the required temperature. When the
oven reaches the temperature, put the food in and check cooking time. Switch off the oven 5
minutes before the theoretical time in order to recover stored heat.

Convection cooking

Convection cookingConvection cooking

Convection cooking

-

Activate the oven and turn the the

rmostat knob in line with the required

temperature.
Convection cooking + steam (dry heat + wet heat)

Convection cooking + steam (dry heat + wet heat)Convection cooking + steam (dry heat + wet heat)

Convection cooking + steam (dry heat + wet heat) - Operate the oven and turn the thermo state
knob to the desired temperature and the humidifier know the desired steam quantity.
Defreezing

DefreezingDefreezing

Defreezing - Operate the oven and turn the thermo state knob and the humidifier knob in
correspondence of position OFF (•).

9.

9.9.

9. Cooking advice

Cooking adviceCooking advice

Cooking advice

Convection cooking

Convection cookingConvection cooking

Convection cooking - Heat is transferred to the foods by pre-heated air, forced to circulate by in
the cooking chamber. The heat quickly and uniformly reaches all parts of the chamber, enabling
simultaneous cooking of different types of food (providing they have the same cooking
temperature), placed on the shelves without mixing tastes and smells. Convection cooking is

Electric Ovens rev. 4______________________________EKF 411 UD – EKF 416 UD – EKF 464 UD – EKF 411 UD/001
EKF 464 UD/001-HT – EKF 464 UD/002-HT

____________________________________________________________________________________________ page 9

particularly convenient for rapid defreezing, and for sterilising preserves and drying mushrooms
and fruit.
Cooking desserts

Cooking dessertsCooking desserts

Cooking desserts - Desserts require a very high temperature (usually from 150 to 200°C) and a
pre-heated oven (about ten minutes). The oven door must not be opened until at least 3/4 of the
cooking time has elapsed. Whipped dough must be difficult to detach from a spoon because
excessive fluidity would prolong cooking time to no avail.
Cooking meat

Cooking meatCooking meat

Cooking meat - Meat to be cooked should weight at least 1 Kg to prevent it drying too much.
Very tender red meats to be cooked rare, which must be cooked on the outside to keep all their
gravy, require short cooking time at high temperature (200-250°C). The gravy ingredients must
be placed immediately in the pan only if the cooking temperature is brief, otherwise they should
be added during the last half-hour. You can check the degree of cooking by squashing the meat
with a spoon: if the meat does not yield, it is correctly cooked. For roast beef and fillet, which
must remain pink inside, cooking time must be very brief. Meats may be placed on a plate
suitable for oven cooking or directly on the grill, under which you should place a tray to collect
the gravy. When cooking has finished, we advise you to wait for 15 minutes before cutting the
meat so that the gravy does not come out. Before being served, the dishes may be kept hot in
the oven at minimum temperature.

10.

10. 10.

10. Routine cleaning and maintenance

Routine cleaning and maintenanceRoutine cleaning and maintenance

Routine cleaning and maintenance

(WARNING:

(WARNING:(WARNING:

(WARNING: Cut power to the appliance before every operation)

Cut power to the appliance before every operation)Cut power to the appliance before every operation)

Cut power to the appliance before every operation)

General cleaning

General cleaningGeneral cleaning

General cleaning - Clean the oven when it is cold. Wash enamelled parts with lukewarm water
and soap, do not use abrasive products, steel wool, or acids, which could ruin them. To clean the
steel parts, do not use products containing chlorine (sodium hypochlorite, hydrochloric acid, etc)
even if diluted. Use specific off-the-shelf products or a little hot vinegar. Rinse thoroughly with
water and dry with a soft cloth. Clean the glass door of the oven with hot water only, and do not
use rough cloths. Do not allow foods (especially acid foods such as salt, vinegar, lemon, etc) to
stagnate on the stainless steel parts, because they could deteriorate. Do not wash the appliance
with direct jets of water, because if water enters, this could limit the appliance's safety. Do not
use corrosive substances (e.g. hydrochloric acid) to clean the oven' s support bench.
Cleaning the oven

Cleaning the ovenCleaning the oven

Cleaning the oven - It is good practice to clean the oven interior at the end of every day of duty.
In this way it will be easier to remove cooking residues, preventing them from burning when the
oven is next used. Clean it accurately with hot water and soap or with the appropriate off-the­shelf products.

Cleaning the oven door

Cleaning the oven doorCleaning the oven door

Cleaning the oven door
To clean the oven door thoroughly, proceed as follows:

- fully open the door;

- insert the equipped plugs in the “A” holes on the hinges (Fig. 6);

- lift the door gently and withdraw it (Fig. 7);

- put back the door in the initial position by operating inverserly.

Fig. 6

Fig. 6Fig. 6

Fig. 6

Fig. 7

Fig. 7Fig. 7

Fig. 7

A

TECNOEKA Srl ________________________________________________________________use and instruction manual

page 10 ____________________________________________________________________________________________

Replacing oven lamp

Replacing oven lampReplacing oven lamp

Replacing oven lamp - Electrically switch off the appliance; unscrew the protective glass cap;
remove the faulty halogen lamp and insert the new one by using paper or cloth to not touch the
lamp with bare hands.

Please note that the new halogen lamp must have the same characteristics as the one removed.

Put back the lamp cover with the gaskets and turn on the electricity.

11

1111

11.... Technical

Technical Technical

Technical assistance

assistanceassistance

assistance

Before leaving the factory, the appliance was completely regulated and tested by expert
specialised personnel to guarantee the best operating results.
All repairs and settings must be performed with utmost care and attention, respecting national
safety regulations in force. Always contact your retailer or our nearest Service Centre, giving
details of the problem, the appliance model and the serial number (on the rating plate on the
rear panel).
For any maintenance the user can contact Tecnoeka by calling the telephone numbers on the
cover or going to www.tecnoeka.com

www.tecnoeka.comwww.tecnoeka.com

www.tecnoeka.com.

11112222.

. .

. Informations to the consumers

Informations to the consumersInformations to the consumers

Informations to the consumers

Further to Directive 2002/96/EC, the symbol of the crossed rubbish skip on
the appliance means that at the end of its life, the product must be disposed
of separately from the other rubbish. The user must hand the appliance to a
specialised waste collection centre for electric and electronic equipment.

The separate collection of the rubbish and subsequent treatment, recovery and disposal help to

produce other equipment using recycled materials, reducing the negative effects on the
environment and public health, which would be caused by incorrect management of the
rubbish.
Should the user dispose of the product abusively, administrative sanctions would be applied.

Electric Ovens rev. 4______________________________EKF 411 UD – EKF 416 UD – EKF 464 UD – EKF 411 UD/001
EKF 464 UD/001-HT – EKF 464 UD/002-HT

____________________________________________________________________________________________ page 11

13.

13. 13.

13. Wiring layouts

Wiring layoutsWiring layouts

Wiring layouts

Key

KeyKey

Key

M Power terminal board

Pr "End of cooking" programmer
MI Door microswitch
T1 Safety thermostat
T2 Control thermostat
R1-R2 Circular heating elements
E Humidifier solenoid-valve
U Humidifier switch
L1 Lighting lamp

V1-V2 Radial motoventilators

V3 Tangential motorised ventilator
C1-C2 Capacitors
IM Operating direction reversing element
B1-B2 Contactors coil
S1 Programmer indicator light
S2 Thermostat indicator light
S3 Humidity indicator light

TECNOEKA Srl ________________________________________________________________use and instruction manual

page 12 ____________________________________________________________________________________________

11114444. The Warranty

. The Warranty. The Warranty

. The Warranty

Your appliance is covered by warranty. The seller will replace or repair (and his decision will be final), free
of charge for the customer, only those parts that are defective due to a manufacturing fault on condition
that, under penalty of forfeiture:

− for domestic equipment, the customer notifies the fault within two months from the date when
he/she discovered it and anyway within 2 years form the date of purchase;

− for professional equipment, the customer notifies the fault within 8 days from the date when
he/she discovered it and anyway within 12 months from the date of purchase,

enclosing a copy of the invoice or receipt proving the purchase.

Apart from the case when the customer cannot produce the invoice or receipt proving the purchase or
when the above-mentioned terms are not complied with, the warranty is expressly excluded

warranty is expressly excluded warranty is expressly excluded

warranty is expressly excluded in the

following cases:

1) faults or breakage caused by the transport;

2) wrong or incorrect installation of the product (for instance because of insufficient draught of the
flue or exhausts) in light of the instructions given in the user’s handbook supplied with the
product;

3) inadequate or abnormal electrical, hydraulic and/or gas supplies;

4) carelessness, negligence or incompetence in using the product in light of the instructions given in
the user’s handbook supplied with the product;

5) use of the product for uses different from the one for which it was built or anyway in a manner
not compliant with the instructions given in the user’s handbook supplied with the product;

6) tampering with the product;

7) adjustments and/or maintenance and/or repairs carried out by unauthorised personnel and/or with
non original spare parts;

8) inadequate or careless maintenance of the product in contrast with the user’s handbook supplied
with the product;

9) damages caused by fire, natural disasters and accident as well as by any cause not attributable to
TECNOEKA SRL.

In addition painted or enamelled parts, knobs, handles, mobile or removal plastic parts, light globes, glass
parts, refractory stones, electronic parts and any accessory parts and transport from the consumers, final
user and/or purchases location to Tecnoeka srl and vice versa are excluded from the warranty.
Replacement costs of the oven and relative installation expenses are also excluded from the warranty.

TECNOEKA SRL cannot be held responsible for any damages, either direct or indirect, caused by the
product breaking down or following its non-use.
Any repairs carried out during the warranty do not cause said warranty to be extended or renewed.
Nobody is authorised to modify the terms and conditions of the warranty or to issue new verbal or written
warranties.
Any dispute shall be settled by the competent Court in Padua.

Warning for the Buyer:

Warning for the Buyer:Warning for the Buyer:

Warning for the Buyer:

1. the cooking appliance is designed only for cooking purposes while the heating appliance is
designed only for heating domestic environments;

2. TECNOEKA S.r.l. does not install the appliances; the seller shall be responsible for any installation
carried out;

3. TECNOEKA S.r.l. cannot be held responsible for any damages, either direct or indirect, to people,
pets or property caused by the appliance breaking down or following its non-use.

The Manufacturer cannot be held responsible for any inaccuracies due to misprints or mistakes in copying
in this handbook. The Manufacturer reserves the right to modify the products as he deems fit, also in the
interest of the user, without affecting the vital characteristics of functionality and safety.

11115555. Availability and supply of spare parts

. Availability and supply of spare parts. Availability and supply of spare parts

. Availability and supply of spare parts

TECNOEKA SRL keeps and ensures the availability of spare parts for a maximum of 24 months from the
date of the sales invoice of the finished product to the dealer. Availability cannot be guaranteed after said
period.