Technika LCD32-310 User Manual

HD Ready LCD TV with Freeview & DVD

User Guide

Model No

LCD32-310

INTRODUCTION

Thank you for purchasing this Technika Advanced which has been designed and
manufactured to give you many years of trouble-free service.

You may already be familiar with using a similar product but please take time to read these
instructions which have been written to ensure you get the very best from your purchase.

Throughout the remainder of this user guide the Technika Advanced will be referred to
as the ‘TV’.

HDMI

HDMI (High Defi nition Multimedia Interface) is the next generation of digital interface. Unlike
conventional connections, it transmits uncompressed digital and audio signals using a single cable.
This TV supports high-defi nition video input via the HDMI socket on the back of the TV.

Safety is Important

To ensure your safety and the safety of others, please read the Safety precautions BEFORE you
operate this product.
Keep this information in a safe place for future reference.

1

3

Important information regarding the digital TV switchover

Television in the UK is going digital, bringing us all more choice and new services. Starting late
2007 and ending in 2012, television services in the UK will go completely digital, TV region by TV region.

How the switchover affects your TV equipment.

Your new TV has a digital tuner built in, which means it is ready to receive the Freeview signal by simply
connecting it into your aerial socket (you can check if you can get digital TV through your aerial now or
whether you will have to wait until the switchover at www.digitaluk.co.uk)

When the TV switchover happens in your area, there are at least two occasions when you will need to re-tune
your TV in order to continue receiving your existing TV channels and also to pick up new ones. Digital UK, the
body leading the digital switchover, will advise you when you need to retune during the switchover.

How to retune.

Retuning your TV is a very quick and simple process. We recommend that you retune
every few months to ensure you are receiving the very latest TV and radio channels
that are broadcast.

• In digital/freeview mode, on the remote control press ‘menu’ quickly followed by 8-8-8-8 (so

press the number 8 four times)

• You will now enter the ‘First time installation’ mode. (if you do not, please refer to the section
called ‘getting started’ later in this user guide)

First Time Installation

Country

Language

Please ensure that the aerial is connected to the connector

labelled ‘ RF In ’ on the rear of the TV .Ensure that OK is
highlighted in yellow and press ‘OK’ on your remote .If after
this scan ,not all digital channels are found ,your aerial may

require a signal booster .alternatively ,upgrade your aerial

to a high gain digital version .

OK Cancel

UK

English

• Simply press ‘OK’ or ‘Enter’ on the remote control and your TV will retune.

If you do not retune your TV when advised to do so by Digital UK, you may lose some or all of your channels
until you do re-tune.

If you are missing any channels, it may be that they are not available in your area, or that your TV aerial
needs upgrading.

For help and support regarding the digital switchover, please contact Digital UK:

Telephone: [phone]

(calls charged at local call rate, approx 3p per minute daytime or 1p per minute evenings from a BT landline)

Digital UK website: www.digitaluk.co.uk

If you require technical or warranty support on this television, please contact the manufacturer helpline, do
not contact Digital UK unless your query is regarding the digital switchover.

4

SAFETY INFORMATION

IMPORTANT SAFETY INSTRUCTIONS – READ CAREFULLY BEFORE USE

Take note of the following safety information which appears on the back of this TV.

CAUTION! TO PREVENT ELECTRICAL SHOCK, DO NOT REMOVE ANY COVER OR
SCREWS. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.

This symbol indicates that there are important operating and maintenance instructions
in the literature accompanying this unit.

This symbol indicates that dangerous voltage constituting a risk of electric shock is
present within this unit.

Keep these instructions

• Do not use this TV near water.

• Clean only with a slightly damp cloth.

• Do not block any ventilation openings.

• Install in accordance with the supplied Quick Start Guide and this User Guide.

• Do not install or operate near any heat sources such as radiators, stoves, or other apparatus that
produce heat.

• Protect the power cord from being walked on or pinched, particularly at plugs, and the point
where it exits from the TV.

• Do not allow the power cord to overhang the edge of a table.

• Unplug this TV during lightning storms or when unused for long periods of time.

• To avoid interference, switch this TV off while operating other radio devices in the immediate
vicinity5HIHUDOOVHUYLFLQJWRTXDOL¿HGVHUYLFHSHUVRQQHO6HUYLFLQJLVrequired when the TV has
been damaged in any way, such as the power cord or plug being damaged, liquid being spilled
on or objects have fallen onto the TV, the TV has been exposed to rain or moisture, does not
operate normally, or has been dropped.

WARNING! TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK, DO NOT EXPOSE
THIS TV TO RAIN OR MOISTURE. THE TV MUST NOT BE EXPOSED TO DRIPPING
AND SPLASHING AND NO OBJECTS FILLED WITH LIQUIDS SHOULD BE PLACED ON
THE TV.

• 1RQDNHGÀ ame sources such as candles should be placed on the TV.

5

CAUTION! CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE
MANUFACTURER COULD VOID THE USER’S AUTHORITY TO OPERATE THIS DEVICE.

CAUTION! USAGE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS
EXPOSURE.

Important

This TV generates, uses and can radiate radio frequency energy and, if not installed and used
in accordance with these instructions, may cause harmful interference to radio communication.
However, this is no guarantee that interference will not occur in a particular installation. If the TV
does cause harmful interference to electrical devices, which can be determined by turning the
TV off and on, the user is encouraged to try to correct the interference by one of the following
measures:

• Re-orient or relocate the receiving antenna.

• Increase the separation between the external device and the TV.

• Connect the external device into an outlet on a circuit different from that to which the TV is
connected.

• Consult the dealer or an experienced radio/ TV technician for help.

ELECTRICAL INFORMATION

Mains Supply

The mains operating voltage is detailed on the rating plate on the rear of the TV.

The mains lead on this equipment may be supplied with a moulded plug incorporating a fuse.
Should the fuse need to be replaced, an ASTA or BSI approved BS1362 fuse must be used of
the same rating. If the fuse cover is detachable never use the plug with the cover removed. If a
replacement fuse cover is required, ensure it is of the same colour as that visible on the pin face of
the plug. If there is no alternative to cutting off the mains plug, dispose of it immediately, having
¿ rst removed the fuse, to avoid a possible shock hazard by inadvertent connection to the mains
supply.

6

7

CONTENTS

SETTING UP YOUR TV

- What is included in the box 9

- REMOTE CONTROL

- CONNECTING THE TV
VTnigninuT-

- Digital Switchover Re-Tune 12

- Remote control buttons and their

- TV buttons and their functions 14

- Inputs and Connections 15

- Choosing Mode/Source 15

TV MENU OPERATION

PICTURE SETTINGS MENU 16 - 17

- Selecting Picture Mode Preset 16

- Adjusting Contrast 16

- Adjusting Brightness 16

- Adjusting Sharpness 17

- Adjusting Colour Temperature 17

- Dynamic Noise Reduction 17

SOUND SETTINGS MENU 18

- Adjusting Volume 18

- Selecting Sound Mode Preset 18

tsujdA-

- Adjusting Balance 18

TUNING SETTINGS MENU 19

- Adjusting Country 19

- Program Edit / Changing Channel

Position 19

- Common Inferface Slot 20

TIMER SETTINGS MENU 20

- On Screen Display Timer 20

GENERAL SETTINGS MENU 21

- On Screen Menu Language 21

- Adjusting Picture Format 21

- First Time Installation 21

- Reset television to factory settings 21

10
11

12

31snoitcnuf

61ruoloCgnitsujdA­71tniTgnitsujdA-

81ssaBgnitsujdA­81elberTgni

91gninuTotuA­91gninuTlaunaM-

20remiTpeelS-

21neercSeulB­21kcoLdlihC-

CHANNEL SERVICES

- Using Electronic Programme Guid

- Using Digital TV teletext 22

- Using Analogue TV teletext 23

PC OPERATION

- Connecting to a PC 24

- Auto Configuration of Screen 25

- Adjusting Phase 25

- Adjusting Clock 25

- Adjusting Horizontal Position 25

- Adjusting Vertical Position 25

- Position Reset 25

DVD MENU OPERATION

SYSTEM SETUP 26

- Adjusting TV System 26

- Adjusting Picture Format 26

- Returning to Default 26
CHANGING REGIONS 27
AUDIO SETUP 27

- Adjusting Tone 27
DIGITAL SETUP 27

- Adjusting Dynamic Range 27

- Adjusting the Sound 27

GENERAL INFORMATION

- Removing the stand 28

- Wall mounting the TV 28

- Using with Sky Digital 29

- Frequently Asked Questions 30

- Technical Specifications 31

- Index 32

22

8

If you experience any problems with this Television,

Please contact the helpline.

Customer Support/Technical Helpline

Telephone: [phone]

WHAT IS INCLUDED IN THE BOX

Accessories

Included with this TV are the following accessories:

1x - User Guide Book 1x - Remote control

CH

VOL

/&'

+'',*,7$//&'79'9'

1x - RF lead 2x - AAA batteries

1x - Quick Start Guide 1x - TV

1x Mains Cable 1x Blanking Plate

Please save your packaging as you will need this in the event

of warranty/service repair or support. We are unable to carry out

warranty/service if you are unable to package it correctly. The safest way

to package your item in the event of warranty/service repair

is in it’s original box/packaging.

9

REMOTE CONTROL

Installing Batteries in the Remote Control

1. Remove the battery compartment cover at the rear of the remote
control by depressing the retaining clip.

2. Install the supplied AAA batteries as shown, ensuring the polarity
matches that shown in the battery compartment.

3. Replace the battery compartment cover.

Using the Remote Control

To use the remote control point it at the TV and press the required
buttons. You must be within 6 metres and at an angle of less than 30
degrees from the centre of the TV.

NOTE: Sunshine or other strong light sources may interfere with the

signal from the remote control. In this situation turn the TV
away from the light source.

WARNING! DO NOT LEAVE BATTERIES IN THE REMOTE CONTROL FOR EXTENDED

PERIODS AS THEY CAN LEAK OR CORRODE CAUSING DAMAGE TO THE REMOTE

CONTROL. CHECK THEM PERIODICALLY AND REPLACE THEM AS REQUIRED.

WARNING! DO NOT MIX BATTERY TYPES. WHEN INSERTING BATTERIES, REPLACE

ALL BATTERIES AT THE SAME TIME. DO NOT MIX OLD AND NEW BATTERIES.

WARNING! EXHAUSTED BATTERIES MUST BE TREATED WITH CARE AND DISPOSED

OF ACCORDING TO ANY SAFETY OR RECYCLING REGULATIONS IN FORCE IN YOUR

LOCAL AREA. NEVER DISPOSE OF BATTERIES INTO GENERAL WASTE, OR FIRE.

10

CONNECTING THE TV

WARNING! ENSURE THE TV AND ALL ANCILLARY EQUIPMENT IS UNPLUGGED
FROM THE MAINS BEFORE MAKING ANY CONNECTIONS!

Connecting the TV Antenna

Connect the TV antenna to the aerial socket with a 75 ohm
co-axial plug. For best results use a high gain TV aerial,
preferably roof or loft mounted.

• To improve picture quality in a poor signal area, purchase
DQGLQVWDOODVLJQDODPSOL¿Hr.

• If the antenna needs to be split for two TVs, use a 2-Way
Signal Splitter (not supplied).

Connecting External Devices

The Quick Start Guide shows the simplest and most effective
way of connecting your TV to ancillary equipment. Alternate
methods are listed below.

NOTE: The TV will connect through the HDMI cable by default. Only use the HDMI cable and one

other option. Connecting more than one option may cause interference.

HDMI lead

You can connect this TV to a compatible device using a HDMI lead. This method will give the best
picture.

Connect the cable from the HDMI equipment to the TV HDMI socket.

SCART lead

You can connect this TV to a compatible device using a SCART lead. The connection uses
component video signals, i.e. the red, green and blue (RGB) content of the video are sent on
separate signals.

VGA cable

You can use your TV as a monitor for your personal computer by using a VGA cable. Sound from
your personal computer may also be played through the TV.

This requires the audio output of the personal computer to be connected to the Audio Input socket
(PC) of the TV.

S-Video lead

You can connect this TV to a compatible device using an S-VIDEO lead.

11