Model:LCD19B-M3
Note: DVD is only available for certain models, please refer to actual products
Safety Notice .........................................................................................
Front Panel Control................................................................................
Connection ...........................................................................................
Remote Control......................................................................................
Installing Batteries.................................................................................
Connection Instructions..........................................................................
External equipment connections...........................................................
Antenna Connection..........................................................................
VGA Input.........................................................................................
YPbPr Input......................................................................................
S-VIDEO Input..................................................................................
SCART Input.....................................................................................
CI Card Input.....................................................................................
HDMI Input.........................................................................................
Basic Operating Instructions....................................................................
Turn on the LCD-TV..............................................................................
Inputs selection...................................................................................
V+/V-..................................................................................................
Mute...................................................................................................
Sound Mode........................................................................................
Select the TV Channel ..........................................................................
Picture Mode.......................................................................................
Program Swap.....................................................................................
Sleep/Scan/Zoom................................................................................
Menu Operations....................................................................................
Picture Menu Options............................................................................
Sound Menu Options..............................................................................
Function Menu Options..........................................................................
Lock Menu Options...............................................................................
Lock Menu Options Continued.................................................................
Tuning Menu Options............................................................................
Tuning Menu Options Continued..............................................................
Time Menu Options...............................................................................
Time Menu Options Continued...............................................................
TELE TEXT............................................................................................
Basic Playback......................................................................................
Advanced Playback...............................................................................
Special Function Playback......................................................................
JPEG DISC PLAYBACK........................................................................
SCREEN SAVER FUNCTION................................................................
DVD System Setup...............................................................................
General Setup Process.........................................................................
General Setup Page.............................................................................
Preferencel Page.................................................................................
Playable Discs.......................................................................................
Disc Protection and DVD Characteristics..................................................
Streaming Media Playing System..............................................................
Troubleshooting Guide...........................................................................
Specifications........................................................................................
2
3
4
5
6
7
7
7
8
8
9
10
10
10
11
11
11
11
11
12
12
12
12
12
13
14
15
16
17
18
20
21
23
24
25
27
28
29
29
29
30
30
31
32
34
35
36
41
42
To prevent fire or electric shocks please read the instruction before
installing, using and cleaning the television.
l Please read all the instructions before operation;
l Please keep the manual for future reference ;
l Do not use any accessories that are not recommended by the manufacturer:
l Before operation, make sure the operating voltage of this unit is corresponds
with your house electrical supply;
l Do not place the unit on unstable or in dusty and humid places;
l Never put the unit in direct sunlight or near heat sources;
l Allow enough space for proper ventilation;
l Please keep water away from the LCD-TV . If water comes in to contact with
the LCD-TV, disconnect the power cord from the power source, then wipe the
set with a dry soft cloth;
l Do not remove the back cover. If servicing is required , please refer to
customer helpline.
Safety Notice
Control Panel Function
1. Standby switch
2. SOURCE Call the Input Source menu/Confirm button when operation
menu.
3. MENU Press to select the main menu
4. VOL- Volume down / Left orientation to adjust the item in the OSD
VOL+ Volume up / Right orientation to adjust the item/Press to enter
5. CH- TV channel down / to select the item in the menu
CH+ TV channel up / to select the item in the menu
6. Power indicator
7.Remote Sensor
(The figure above and the description of the button may be different,
all picture in this manual is just for reference, please see the actual set.)
SOURCE MENU VOL- VOL+ CH- CH+ STANDBY
2 3 4 5 1
R1
POWER
Front Panel Control
DVD insert
PREV NEXT
STOP
PLAY/PAUSE
OPEN/CLOSE
(Please refer to actual product
of the DVD slot and buttons)
Just take one TV with DVD for example,
please see the real)
USB
HDMI
TV SCART
YPbPr
Common Interface
S-VIDEO
AUDIO IN
VGA IN
PC AUDIO IN
ANT IN
Connect to HDMI output of other equipment
Connect a component video/audiodevice to these jacks
Component/S-Video Audio Input
Earphone port
COAXIAL
Connect to the VGA 15PIN analog output connector of the Pc display
card for PC display purpose
Connect the PC outpu tconnec tor from a PC to the audio
Connect cable or antenna signals to the TV, either direc-tly or
through your cable box.
ANT IN
TV SCART
VGA IN
HDMI
USB
S-VIDEO
Pr
Y
Common Interface
COAXIAL
AUDIO
LR
Pb
PC AUDIO IN
COMPONENT IN
Connection
When using the remote control, aim it
towards the remote sensor on the TV
Stand By
DVD Menu
DVD open/close
Picture Mode
Sound Mode
Call Screen Display
Sleep button
DVD Audio/DTV Audio/NICAM
ARC button
Program Number Channel selection
Source Exchange
Q.VIEW
V+/V- :Volume selection
P+/P-:Channel selection
Mute
GUIDE Button
Menu button
Cursor Mover Button
DVB-T favourite
Exit Screen Display
Back button (only for USB)
Zoom(only for DVD &USB)
Play/pause button(only for DVD &USB)
Teletext index/STOP(only for DVD &USB)
REPEAT(only for DVD &USB)
FAST FORWARD(only for DVD &USB)
PREVIOUS(only for DVD &USB)
FAST REVERSE(only for DVD &USB)
NEXT(only for DVD &USB)
DVD SET UP/ TEXT
DVD TITLE/TELETEXT MIX
DVD SEARCH/TELETEXT SUBCODE
DVD 10+/TELETEXT HOLD
DVD PROGRAM/TELETEXT REVEAL
DVD CALL/TELETEXT MODE
DVD A-B REPEAT/TELETEXT SIZE
DVD ANGLE/TELETEXT TIME
OK Button
Buttons on the remote control
/
REPEAT ZOOM PLAY/PAUSE INDEX
REV FWD PREV NEXT
SET UP TITLE SEARCH 10+
PROGRAM A-B ANGLE D.CALL
X
D.MENU
OPEN/CLOSE
123
456
789
0
GUIDE
MENU
FAV
OK
EXIT BACK
INFO P.MODE S.MODE SLEEP
AUDIO SUB TITLE CH.LIST ARC
SOURCE Q.VIEW
MUTE
I
I/II
V
V
I
Remote Control (for TV/DVD Combi)
Installing Batteries
3
2
1
1.Open the cover of the battery compartment at the back of the remote
control.
2.Insert two AAA alkaline batteries in the compartment. (plus and minus poles to
respective mark)
3.Replace the cover of the battery compartment.
Precautions
Make sure that there is no
obstacle between the remote
controller and television set.
As strong light may interfere the
signals, change your position to
operate the remote controller if
the television cannot be turned
on or off as you expect.
Keep the remote controller
away from heat source or
humid area to ensure
effective performance of
the remote controller.
Make sure that two AAA 1.5V alkaline
batteries are loaded. The batteries
must be of the same type. The batteries
must be located properly. The batteries
are not rechargeable. If your TV is to be
stored for a period of time, remove the
batteries from the remote control.
Installing Batteries
External Equipment Connections
Antenna Connection
- Antenna or Cable Service with a Cable Box Connections
- For optimum picture quality, adjust antenna direction if needed.
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
wall antenna
socket
VHF antenna
UHF antenna
outdoor
antenna
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
Be careful not to bend the bronze
wire when connecting the antenna.
To improve picture quality in a poor
signal area, purchase and install a
signal amplifier.
If the antenna needs to be split for two
TV s, install a 2-Way Signal Splitter
in the connections.
If the antenna is not installed properly,
contact your dealer for assistance.
NOTE: All cables shown are just for example.
RF coaxial wire (75 ohm)
ANT IN
ANT IN
Connection Instructions
You can use your LCD-TV as a monitor for your personal computer using a VGA cable (not supplied).
Connection and use steps:
1.Read the user guide supplied with
your computer and ensure that it has a VGA
connector;
2.Make sure that the power of the LCD
-TV and the PC are off;
3.Connect a D type 15-pin VGA interface cable
( not supplied ) to the VGA video interface
connector on the PC. Then connect the other
end to the PC videointerface connector
on the back of the LCD-TV.Tighten the screws
on the VGAconnectors once they are firmly
connected, connect the audio cable(not
supplied)to the audio input on the back of
your LCD-TV;
4.Turn on the power of the LCD-TV first ,
and then turn on the power of the PC;
5.Set the video input mode of the LCD-TV to PC;
6.Check the image on your TV. There may be noise associated with the resolution,
vertical pattern, contrast or brightness in PC mode. If noise is present, change
the PC mode to another resolution, change the refresh rate to another rate or
adjust the brightness and contrast on the menu until the picture is clear. If the
refresh rate of the PC graphic card cannot be changed,change the PC graphic
card or consult the manufacturer of the PC graphic card.
Frame frequency (Hz)Line frequency (Khz)
VGA
SVGA
XGA
640*480 31.5KHz 60Hz
800*600 37.9KHz 60Hz
1024*768 48.4KHz 60Hz
Mode Resolution
Note: All above listed are subject to VESA Criteria.
YPbPr Input
How to connect
Connect the DVD video outputs (Y, PB, PR)
to the Component(Y, Pb, Pr) in socket on
the TV and connect the DVD audio outputs
to the AUDIO jacks on the TV, as shown
in the figure.
NOTE: If your DVD player does not have
component video output, use S-Video.
How to use
1. Turn on the DVD player, insert a DVD.
2. Set the mode of the LCD-TV to Component.
VGA IN
VGA Input
Connection Instructions
(If connected to S-Video,select the S-Video external input source.)
3. Refer the DVD player's manual for operating instructions.
Component Input ports
To get better picture quality, connect a DVD player to the component
input ports as shown below.
S-VIDEO Input
Connection and use steps:
1.Read the user guide supplied with your AV devices and ensure that it has
S-Video connectors;
2.Make sure that the power of the LCD-TV and the AV device are switched off;
.Turn on the power of the LCD-TV first ;
and then turn on the power of the AV
device;
4.Set the video input mode of the LCD-TV
to S-Video mode .
Connection Option 1
Set VCR output switch to 3 or 4 and then
tune TV to the same channel number.
Connection Option 2
1. Connect the audio and S-Video cables
from the VCR's output jacks to the TV
input jacks, as shown in the figure.
2. Insert a video tape into the VCR and
press PLAY on the VCR. (Refer to the
VCR owner’s manual.)
3
To avoid picture noise (interference), leave an adequate distance between the
VCR and TV
.
VCR
1
2
Connection Instructions
SCART Input
1.Connect the scart lead from the external device(DVD
players, settop boxes or game consoles, to the TV SCART
socket.
2.Set the mode of the LCD-TV to SCART.
3. Press Play button on external equipment and it should
appear on the screen.
HDMI
HDMI
HDMI Input
HDMI Devices
Connect the cable from the HDMI devices
to the TV HDMI, as shown in the figure.
How to use
1. Set the mode of the LCD-TV to HDMI.
2. Operate the corresponding external equipment.
Refer to external equipment operating guide.
SCART
External equipment
TV
HDMI Devices
CI Card Input
The common interface (CI) slot is designed to accept the Conditional
Access (CA) Module and Smart card in order to
view the pay TV programmes and additional
services. Contact your Common Interface
service provider to get more information about
the modules and subscription. Please noted that
CA modules and smart cards are neither
supplied nor optional accessories from us.
Warning: switch off your TV before any module
is inserted in the Common Interface slot.
Insert the CAM correctly, then Smart Card to the
CI slot that is located at the side of the TV.
Connection Instructions
Turn on the LCD-TV
When the POWER(STANDBY) button on the remote control is pressed and the
LCD-TV is turned on, the indicator light on the front of the LCD-TV changes from
red to green. When the LCD-TV is turned off using the POWER(STANDBY)
button, the LCD-TVwill go into standby mode and the indicator light turns red.
You can also turn on the TV from standby mode by pressing the digits(1-9) or P/P+.
V+/V-
Press the V+/V- button to increase/decrease the volume and there will be display
on the bottom of the screen.
Mute
1.Press the MUTE button to mute the sound temporarily. A mute icon appears on
the screen.
2.Press the MUTE button again or V+ to restore the sound.
The mute icon disappears.
The display will appear on the screen
when the TV is turned on for the first
time:
Press to select the language you
want, then press to select the
Auto Search and OK to enter the submenu:
press to select the country you are in,
then press to move to the following
item and to select Start , then press
OK to confirm.
All channels will be stored after the
searching.
/
/
/
/
/
Inputs selection
Press SOURCE button to display the Source menu.
Press button to select the inputs you need and
the TV will turn to the source automatically
in 3 seconds or press OK to confirm.
/
DTV
TV
SCART
Component
PC
HDMI
S-Video
USB
DVD
Installation Guide
Language English
Auto Search
Please select country first
Then select Start to update info.
Country selection UK
Start Cancel
EXIT
MENU
OK
Source
EXIT
OK
Basic Operating Instructions
Select the TV Channel
You can use the number keys on the remote control to directly select TV
channels.
The LCD-TV can store up to 100 channels , and you can press the P+/P- keys
on the remote control or on the TV set to make a selection.
Picture Mode
Press P.MODE button on the remote control for menu display . For desired mode as
follows:
Standard Mild Personal Fresh
Q.VIEW
1 S
2
3
uppose the TV set is in channel 8 just now and in channel 18 now .
If you want to return to the last watched program in channel 8, you can simply press
the Q.VIEW button.
If you want to return to channel 18, press the button again. Through this function, you
can easily change between the channel you are watching and the channel you watched
just now.
Sleep
Press SLEEP button to set the sleep timer among Off/10min/20min/30min/60min/90min
/120min/180min/240min.
Sound Mode
Press S.MODE button on the remote control for menu display . For desired
mode as follows:
Standard Music Theatre Voice Personal
Zoom
Press to zoom the picture .
Basic Operating Instructions
1. Press MENU button to display the main menu, and to select the
main menu .
2. Press to scroll through the options
3. Press buttons to make changes to the parameters
4. Press MENU to exit the menu step by step
5. Press the EXIT button to exit the menu
/
/
/
PICTURE MENU
TUNING MENU
EXIT
MENU
OK
PICTURE
Video Mode Personal
Contrast
Brightness
Colour
Sharpness
Tint
50
50
50
50
0
FUNCTION MENU
EXIT
MENU
OK
FUNCTION
Language English
Subtitle Language English
Display Mode Auto
Blue Screen Off
Software update Off
Carry out system update V1.1
Reset
EXIT
MENU
OK
TUNING
Auto Search
DTV Manual Search
ATV Manual Search
Tuning Program
Guide
CI Information
LOCK MENU
LOCK
Change Password
Menu Lock Off
Program Set Off
Program No . 1
Source Lock
Child Lock Off
MENU
OK
EXIT
EXIT
MENU
OK
TIME
Clock -- -- -- -Off Time Off
On Time Off
Sleep Off
Time Zone London GMT
TIME MENU
SOUND MENU
EXIT
MENU
OK
SOUND
Audio Language English
Audio Mode Personal
Treble
Bass
Balance
AVL Off
50
50
0
Menu Operations
3.Press button to increase and decrease the level to match your preference .
4. Repeat step 2 and step 3 until desired picture quality has been achieved .
/
Functions:
Video Mode: Press to set the picture mode .
Contrast : Used to set the contrast balance of the picture.
Brightness : Used to set the brightness level of the picture.
Colour : Press to adjust the colour saturation of the picture.
Sharpness : By increasing the level, it will show cleaner and clearer images
and by decreasing the level, it will make picture smoother.
Tint(Only available in NTSC): Set the colour tone of the picture.
Colour Temperature : Press to select the colour temperature from Normal/Cool/
Warm .
Noise Reduction: Adjust the quality of the picture by selecting Off,Low,
Middle,High.
PC Adjust (can be adjust only in PC mode and there is PC signal): Press OK button
to enter the submenu. Press to adjust the value.
/
/
/
Picture Menu Options
Picture quality can be adjusted for any input separately .
The picture quality on the screen can be adjusted as follows:
1. Press MENU button and until the picture menu appears on the screen.
2. Press button to enter the picture menu and go up and down to select
the desired option .
/
/
NOTE: Using your remote control to navigate in the on-screen menus.
The on-screen menus shown in this manual may be different from those on your TV. These
are example to illustrate your TVs operation.
EXIT
MENU
OK
PICTURE
Auto Sync
H.Position
V.Position
Size
Phase
50
50
50
0
Menu Operations
2. Press button to enter the sound menu and up and down to
select the desired option .
3.Press button to increase and decrease the level to match your preference .
4. Repeat step 2 and step 3 until desired sound quality has been achieved .
/
/
/
Functions :
Audio Language(only available in DTV mode) : Press OK to enter the submenu.
Then press to select the Primary and the Secondary item and press
to select the language you need.
Audio Mode : Press to select among Music/Theatre/Voice/Personal/
Standard.
Treble : Increases or decreases the level of the treble sounds.
Bass : Increases or decreases the level of the bass sounds.
/
/
Sound Menu Options
Sound can be adjusted as follows:
1. Press MENU and button until the following menu appears on the screen
/
EXIT
MENU
OK
SOUND
Audio Language English
Audio Mode Personal
Treble
Bass
Balance
AVL Off
50
50
0
Auto Sync: Adjust the picture location frequency and phase parameters
automatically in PC.
H.Position: Picture horizontal adjust.
V.Position: Picture vertical position adjust.
Size: Adjust the size of the LCD to match the PC input source.
Phase: Removes any horizontal distortion and clears or sharpness the
displayed characters.
Menu Operations
Function Menu Options
1. Press MENU button and until the following menu appears on the screen.
2. Press button to enter the function menu and go up and down to
select the desired option .
3.Press button to increase and decrease the level to match your preference .
4. Repeat step 2 and step 3 until desired function quality has been achieved .
Functions:
1. Language: Used to set the language of the on-screen display.
2. Subtitle Language (in DTV mode only): To switch the subtitle languages .
3.Display Mode: Used to set the aspect ratio of the display. Choices include Auto
/Full Screen/Zoom1/Zoom2/4:3( Display mode may differ from different
inputs. )
4. Blue Screen(in ATV mode only): Used to turn the blue screen option On or Off.
With the option on, your TV screen turns blue after 3 seconds without an input
signal.
5. Reset : Press OK button to enter the dialogue Are you sure? And press
to select Yes, then press OK button to reset the TV setting to factory default.
/
/
/
/
Note: Bass and Treble can be adjust in any audio mode, and if the numerical
value is changed, the audio mode will be changed to personal automatically.
Balance : Adjust the audio output between left and right speakers.
AVL: Automatic Volume Limit Control . Reduces the differences in volume level
between different broadcasters.
EXIT
MENU
OK
FUNCTION
Language English
Subtitle Language English
Display Mode Auto
Blue Screen Off
Software update Off
Carry out system update V1.1
Reset
Menu Operations
Lock Menu Options
1. Press MENU button and until the following menu appears on the screen.
2. Press OK button to display the following menu .
Press the number buttons (0~9) to enter the password.(The initial password is
0000. If you forget your password, you can enter 9443 at any time to access the
lock menu), the lock menu opens.
3.Press button to go up and down to select the desired option .
4.Press button to increase and decrease the level to match your preference .
5.Repeat step 3 and step 4 until desired quality has been achieved .
/
/
/
EXIT
MENU
OK
LOCK
Change Password
Menu Lock Off
Program Set Off
Program No . 1
Source Lock
Child Lock Off
EXIT
MENU
OK
LOCK
Change Password
Menu Lock Off
Program Set Off
Program No . 1
Source Lock
Child Lock Off
Please enter password
Functions:
1. Change Password: The password can be changed. Press OK to enter the menu
as follows. Enter the password , if the same password is entered correctly twice,
the old password will be changed.
Menu Operations
Lock Menu Options Continued
Menu Lock: Press to select Off/Tuning/Main Menu.
To set Tuning, the search function will be locked, to set Main Menu, you will need
input the password if you want to operation any menu.And you can resume it by
setting Off or operate Clear Lock.
Program Set: Used to set up start condition. Press to select among the
inputs signals. The setted mode will be entered if the TV is switched off and on
again. To set Off, the TV will memory the off-mode.
Program No.(it can only be selected when the Program Set is DTV or TV): Press
to select the channel number you want to watch when the TV on again.
Source Lock: Opted to hinder external input modes, such as PC. Press OK to
display menu as follows. Press to select the option, and press
to set on or off. If you want to cancel some source mode, enter lock menu and
set it off or active clear lock.
/
/
/
/
/
EXIT
MENU
OK
LOCK
Change Password
Menu Lock Off
Program Set Off
Program No . 1
Source Lock
Child Lock Off
Please enter password
New
Confirm
EXIT
MENU
OK
LOCK
DTV
TV
SCART
Component
PC
HDMI
Off
Off
Off
Off
Off
Off
Child Lock: Press button to set on or off mode. If lock on mode is set, child
lock is inactivated automatically. In such case, buttons on the television is useless
and only buttons on remote control can be used, if child lock button(button on the
television) is pressed, the screen will display Child Lock. The child lock mode
can be resumed by entering Lock set menu, set child lock off or active Clear Lock .
/
Menu Operations
Lock Menu Options Continued
EXIT
MENU
OK
LOCK
Max Volume 100
Initial Volume Off
Channel Lock
Clear Lock
Parental Lock Off
Max Volume: Press to adjust. If a certain value is set, when volume is being
adjusted, the sound value can not exceed that maximum volume value.
Initial Volume: Used to memory the volume you have set when you turn on our TV
after turn off it.
Channel Lock: Press OK button to enter the submenu. Press to select the
program you want to Lock. The colour of the circle is corresponding with the
buttons on the bottom of the remote control.
LOCK: to lock the program by pressing the green button and press again to
unlock. If a channel is locked, the password is required to be input when you
select the channel. (The initial password is 0000)
MENU: Exit the screen step by step.
EXIT: Press EXIT to exit the screen.
OK: Press to select the channel and then press OK button to enter it.
Clear Lock: Press to unlock all set modes, setting all lock options to off,
and the maximum volume returns to 100.
Parental Lock: Press to change the setting. To enable setting specific
program blocks according to different ages.
/
/
/
/
/
Menu Operations
Note: This menu only appears in TV and DTV mode .
2. Press button to enter the tuning menu and go up and down to
select the desired option .
3.Press button to increase and decrease the level to adjust the
selected option to your preference .
4. Repeat step 2 and step 3 until desired quality has been achieved .
/
/
Tuning Menu Options
1. Press MENU and button until the following menu appears on the
screen
/
EXIT
MENU
OK
Auto Search
DTV Manual Search
ATV Manual Search
Tuning Program
Guide
CI Information
TUNING
Functions:
1. Auto Search: Auto search the TV signal source for available channels, then
put them in memory. Press to select the item. Then press OK to confirm.
The on-screen menu appears :
Press to select the country and press to select Start and then press
OK to confirm, the following will appears on the screen:
/
/
/
EXIT
MENU
OK
Auto Search
DTV Manual Search
ATV Manual Search
Tuning Program
Guide
CI Information
TUNING
Please select country first
Then select Start to update info.
Country selection UK
Start Cancel
Menu Operations
Channel Tuning
32%... 687.25MHz TV
TV : 12 Programme(s)
DTV : 0 Programme(s)
Radio : 0 Programme(s)
Press<Menu> to skip.
Press<Exit> to exit.
EXIT
MENU
You can press EXIT button to enter the submenu and then select Yes to exit the
tuning absolutely.
The first time you press MENU button the menu will display on the screen, and
you can select Yes ,the ATV tuning will be skipped.
The second time you press MENU button the menu will display on the screen, and
you can select Yes ,the DTV tuning will be skipped.
Do you want to skip ATV tuning?
Yes No
Do you want to skip DTV tuning?
Yes No
DTV Manual Search: Press OK button to display the submenu. After selecting
DTV channel number, press OK again to start to search digital channel and you
can press EXIT to exit the search.
ATV Manual Search: Press OK button to display the submenu. Press to select
the item and to adjust.
Select System among DK/L/BG/I and set the Current channel. Then select
Search and press to start it. Select Fine-Tune and adjust it to improve the
picture. After these operation you could select Storage To to set the channel
number you want to save. Then press the red button to save the adjustment or
press EXIT to exit it.
/
/
/
ATV Manual Search
Storage To 3
System DK
Current CH 3
Search
Fine-Tune
Skip Off
Frequency 424.75MHz
EXIT
SAVE
Menu Operations
EXIT : Press EXIT button to exit the screen.
INFO: Press to select the program and then press INFO button to display the
program information.
Schedule: Press the green button to display the schedule you have set .
DATE: Press yellow button to enter the submenu, then press button to
set the date. You can press yellow button again to back to the menu.
Reminder: Press blue button to enter the submenu.
/
/
Reminder
10 Mar 2008 14:58
Programme 5 Five
Hour 14
Minute 35
Mode Once
Date Wed.21
Month Mar
EXIT
MENU
Schedule
OK
PROGRAMME GUIDE
10 Mar 2008 15:04
DTV 23 bid-up.tv
DTV
10 Mar
16:30 17:30
5 five The street of San Fra... No Information
16 QVC Gold Workshop With Jan Spanish Funstamps
17 UK Gold
No Information
23 bid-up.tv
25 TCM
26 UK Style
No Information
No Information
No Information
EXIT
INFO
Schedule
DATE
Reminder
OK
The colour of the circle is corresponding with the buttons on the bottom of the
remote control.
Guide( in DTV mode only): Press OK button to enter the submenu.
Tuning Program: Press OK button to enter the submenu. Press to select the
program you want to edit. The colour of the circle is corresponding with the
buttons on the bottom of the remote control.
NAME(only available in ATV ): to rename the analog channel by pressing the red
button. Then press to input the characters and press to select the position.
FAV: to set the favourite program by pressing green button and press again to
cancel.
MOVE: press yellow button after you selected a channel (eg.1), then press to
move the channel selected to the channel number (eg.9) you want to place. Then
the two channel program will be exchanged.
SKIP: to skip the channel when press button by pressing the blue button
and press again to cancel.
P+/P-
/
/
/
/
Menu Operations
Time Menu Options
EXIT
MENU
OK
TIME
Clock -- -- -- -Off Time Off
On Time Off
Sleep Off
Time Zone Lisbon GMT
1. Press MENU and button until the following menu appears on the
screen
/
2. Press button to enter the time menu and go up and down to
select the desired option .
3.Press button to increase and decrease the level to adjust the
selected option to your preference .
4. Repeat step 2 and step 3 until desired quality has been achieved ..
/
/
Functions:
1.Clock( can not be adjusted in DTV mode): Press OK button to enter the
submenu.
Program: Press to select the program you want to watch.
Hour/Minute/Date/Month: Press to set the time.
Mode: Press to select Once/Everyday/Weekly .
If Everyday selected, the Date and Month will not be available.
After the operation above, press OK to reminder or press green button to display
the schedule you have set.
CI Information: insert a card first and CI Module Inserted will be on the screen.
After selecting CI Information, press OK to access the card menu. Refer to the
module instruction manual for setting details.
When module is removed, the CI Module Removed will be on the screen.
/
/
/
Menu Operations
Clock -- -- -- --
Off Time Off
On Time
Sleep
Time Zone Lisbon GMT
Close
EXIT
MENU
OK
TIME
Repeat Off
Hour 00
Minute 00
Press to select Repeat and to select the frequence, then set the
hour and minute. (The Hour and Minute can not be available when Repeat is off).
If you have finish the adjustment, select Close and then press OK to exit.
On Time: Used to set the time that the TV comes on automatically. And the
operation is the same with the Off Time above.
Sleep: Press to set the optional sleep timer.
Time Zone: Press to set the optional time zone.
/
/
/
/
Clock -- -- -- --
Off Time Off
On Time
Sleep
Time Zone Lisbon GMT
Date 29
Month 5
Year 2008
Hour 18
Minute 32
Close
EXIT
MENU
OK
TIME
Press to select the item and to adjust, if you have finish the
adjustment, select Close and then press OK to exit.
Off Time: Used to set the time that the TV goes off automatically.
Press OK button to enter the submenu as follows:
/
/
Menu Operations
V
V
Teletext
Teletext is an information system, broadcast by certain channels, which can be read like
a newspaper . It also provides subtitles for people with hearing difficulties or those who
are unfamiliar with the language in which a particular program is being broadcast (cable
networks, satellite channels, etc.).
Teletext functions
Page up/down
Use the P+/P- buttons to browse next or previous page.
Page number entering
Mix mode
Volume adjustment
Mute function
To select teletext press the TEXT button on the
handset. To switch off teletext, press the button again.
Note all menu functions are not available in teletext
mode . Only a few direct button control functions are
available in teletext mode, they are:
To select a Teletext page, enter the page number using
the numeric key pad on the remote control, or use the
P+ or P- buttons, or the coloured Fast text buttons.
To view the TV picture while in Text mode press the
button, this will superimpose the Teletext data on top
of the TV picture. Press this button again to return to
Full text.
INDEX
Press the INDEX button to go to the index page of teletext.
Note: The teletext buttons could be working even if there is no teletext signal, but there
is no teletext display.
INDEX
SET UP
123
456
789
0
TITLE
TELETEXT
SEARCH
Language change
Pressing the button will change the Teletext characters
between Eastern and Western.
Hold
Pressing the button will stop the teletext page automatically updating. This feature is very useful where there are
several teletext pages or data on the same page number.
Size
Pressing the button changes between full screen top
half bottom half full screen. This feature is very useful as it
magnifies the image making the characters easier to read.
Reveal
Pressing the button will reveal hidden text. This feature
is used to reveal information such as answers to Teletext
on-line interactive puzzles.
Time
While in normal TV mode only, pressing the button will
display the teletext time in the top right hand corner for a
few seconds.
Subcode
Pressing the button by entering its 4-digit number to
enter a secondary page
Fast text coloured buttons
Fast text automatically displays the four most commonly
used pages that the broadcaster thinks that you may want
to choose next. Press the same coloured button on the
remote control as the coloured link at the bottom of the
teletext page to go directly to that page.
A-B
REVEAL
TIME
D.CALL
10+
REV FWD PREV NEXT
TELETEXT
Data Side
Preparations
1. Place the DVD in the disc slot as figure above.
The disc will be loaded automatically after one to
two seconds, then the DVD player reads the DVD
and displays the opening menu. If there is no
disc placed on the disc slot in DVD mode, OPEN
will display on the screen all the times)
There is only one disc size can be loaded in
the disc slot .
Do not place a disc which is unplayable in
this DVD player.
Some disc may not playback automatically,
you can press button to start
playback.
2. Some disc may start playback with a menu,
use the cursor button on the remote control to
select menu options and press
to start, or press digits to select a menu
options directly.
PLAY/PAUSE
PLAY/PAUSE
1. Press to pause playback (still
mode). The sound will be muted during still mode.
2. Press to resume normal playback.
PLAY/PAUSE
PLAY/PAUSE
Pause playback
1. Press button to go to stop mode, the
TV screen will show the start-up logo. For some
disc the player can recall the location where
stopped, such as DVDs and audio CDs.
2. Press to resume playback from
the location where playback is stopped.
3. Press twice to stop completely.
INDEX
PLAY/PAUSE
INDEX
Stop playback
Previous and Next
During playback, press PREV key can go
back to the beginning of this chapter, then each
press of this key will skip a chapter till the start of
the disc. (note: Disc function may vary
depending on disc format)
Each press of NEXT key during playback will
skip the current chapter and play the next one.
Fast forward and Fast reverse
1. Press FWD to fast forward through the disc.
Each time the FWD button is pressed, the fast
forward motion speed changes. It would cycle
through 2X, 4X, 8X, 16X, 32X and normal.
2. Press to resume normal playback.
3. Press REV to fast reverse through the disc.
Each time the REV button is pressed, the fast
reverse motion speed changes. It would cycle
through 2X, 4X, 8X, 16X, 32X and normal.
4. Press to resume normal playback.
PLAY/PAUSE
PLAY/PAUSE
Basic playback
Operate the remote to set the TV to DVD status.
Note: The unit do not allow enter DVD mode again
(or place a DVD in the disc slot)after it have just left
to avoid any damage of the DVD. Wait for 10 seconds
to enter again.
Press this button can zoom enlarge or lessen the picture.
Each time pressed the picture times will be change.
ZOOM
When pressing the D.CALL button repeatedly
different OSD indicator will be displayed for
different types of disc DVD, CD etc
D.CALL
In zoom mode press navigation buttons to move
the picture displayed on the screen
Basic Playback
PROGRAM
REPEAT
IMPORTANT NOTE:
ALL DESCRIBING FUNCTION IS FOR DVD DISCS. IF YOU PLAY OTHER FORMAT DISC, THE
OPERATION AND DISPLAY ON SCREEN MAY DIFFERENT.
SUBTITLE
A-B
Press A-B to mark the start-point, press again to
set an end point to complete setting. The
selected section A-B will be repeated
immediately. Press the Repeat A-B again to cancel
this function.
SEARCH
D.MENU
Press this key to display root menu, select item
according to your preference. (This function will
work with a DVD having a multi-layer menu.).
ANGLE
When enjoying sports, concert or theatre, press
this key to watch same actions in different angles.
(Valid for discs possessing this function. Using a
disc recorded in multi-angle you can view the
scene from different angles, for example, front,
side, whole view and exterior scene.)
Press this key can change the audio mode.
such as: Audio 1/2: AC 3 2 CH English
Audio 2/2: AC 3 5.1 CH English
If you play CD disc, press this button can cycle
among Mono Left, Mono Right, Mix-Mono and
Stereo.
AUDIO
TITLE
With some DVD discs pressing this key will display
the title menu. You can then use the digit buttons to
select the item you prefer.
Note: When press this button continuously, you must
above 3 seconds interval.
Press "SEARCH" once to display the search menu.
Use the up/down navigation buttons to select the
item you require. Press to confirm
(CD press the search button several times to
select the item). And then press the numeric
buttons or navigation buttons to input the item
you require. Press to confirm.
PLAY/PAUSE
PLAY/PAUSE
Press REPEAT button multiple times to reach
desired play mode:
DVD
Chapter repeat, Title repeat, All repeat
CD
Single-play current track, Repeat One-repeat
current track, Repeat Folder-repeat current
folder, Folder-play current folder.
Advanced Playback
When playing discs, press " PROGRAM "
to enter program mode. Press the digit buttons
to select the program number that you want.
When finished, move the cursor to select
"START" . This will start the program playback.
If you want to cancel this function, press " INDEX
" , then press “ ” .PLAY/PAUSE
Press " SUBTITLE ", the screen will display
"SUBTI-TLE 01/XX ", "01" indicates the
ordinal number of this language; "XX"
indicates total number of language; (the
number of language depends on disc). This
function can select up to 32 languages
displayed on screen.
JPEG DISC PLAYBACK
Insert a picture CD or JPEG picture CD into the tray and the disc will be loaded
automatically. If the disc type can be identified, the player will start showing the pictures one by one
(slide show mode).If a navigation menu will be displayed use the navigation buttons to select a file,
then press the PLAY/PAUSE button.
Each picture in the CD will be displayed consecutively in a slide-show fashion and will be scaled to
fit in the whole TV screen. Some slide show transition modes are provided, use "PROGRAM" key to
select. Customer can set transition effects for each picture.
To display an image indefinitely, press the "PAUSE/STEP" key. To view the next or previous picture,
press "NEXT" or "PREV" key. To resume the slide show, press the " PLAY/PAUSE key.
Press the INDEX button to preview the photos in a folder. Press navigation buttons to rotate a picture.
If this unit is idle for 3 minutes, it will go to sleep mode with screen saver on. In this mode,
you can press any key on remote control or on front panel to activate the unit.
You can set Screen Saver function to Off in General Setup Page of dvd system
setup.
SCREEN SAVER FUNCTION
Special Function Playback
General Setup Process
1.Press the SETUP button, the
General Setup Page, Preference
Page will be displayed in turn.
2.Press CH+/- b to select, the
item, then press to enter the
submenu.
3.Press CH+/- bu to select then
press OK to confirm.
4.Press SETUP repeatedly to
exit the set-up menus.
or
or
General Setup Page
When using the DVD with the internal TV,
select 4 3/LB.
The following information applies only
when the DVD output is connected to an
external TV.
4 3/PS (PS = Pan and Scan)
You may select this if you have a normal
aspect ratio (4:3) TV, although the NORMAL
/LB (letter box) is a more common choice. In
PS mode, widescreen material will fill the screen, but at the expense of
chopping off extreme left and right edges of the original film picture. For this
feature to work, the disc must be specially coded. Such discs are uncommon.
4 3/LB (LB = Letter Box)
You may select this if you have a normal aspect ratio (4:3) TV. Widescreen
material will be shown in pure unaltered form, allowing the entire picture area
of the original film to be viewed without any side cropping. Black bars will
appear above and below the picture.
16 9
You may select this if you have a widescreen (16:9) TV. Back bars may still
appear above and below the picture even if using a widescreen TV. This is
because some film directors prefer to use ultra widescreen aspect ratios e.g.
2.35:1. This will normally be indicated on the DVD packaging.
ASPECT RATIO DESCRIPTION
..General Setup Page..
Tv Display 4:3 LB
Angle Mark On
Osd Lang ENG
Caption On
Screen Saver Off
4 3/Ps
4 3/Lb
16 9
.
.
PAL
AUTO
NTSC
..Preference Page..
TV Type
Parental
Password
Default
Auto
..General Setup Page..
4 3/Ps
4 3/Lb
16 9
.
.
Tv Display 4:3 LB
Angle Mark On
OSD Lang ENG
Caption On
Screen Saver Off
Hdcd Off
Last Memory On
SETUP
OK
OK
SETUP
DVD System Setup
..General Setup Page..
Tv Display 4:3 LB
Angle Mark On
Osd Lang ENG
Caption On
Screen Saver Off
Hdcd Off
Last Memory On
Tv Display 4:3 LB
Angle Mark On
Osd Lang ENG
Caption On
Screen Saver Off
Hdcd Off
Last Memory On
Tv Display 4:3 LB
Angle Mark On
OsdLang ENG
Caption On
Screen Saver Off
Hdcd Off
Last Memory On
Tv Display 4:3 LB
Angle Mark On
Osd Lang ENG
Caption On
Screen Saver Off
Hdcd Off
Last Memory On
General Setup Page
Caption: This function allows you to
display or hide the caption.
Screen Saver: If the screen saver is on,then there
will be an animated picture of DVD on the screen
whenever the DVD player is idle for more than 3
minutes .
..General Setup Page..
..General Setup Page..
On
Off
This item allows you to set Angle Mark On or Off.
Angle Mark: Users can select a particular
camera angle when playing a DVD which offers
multiple angles.
.
On
Off
On Screen Display (OSD) Language: Users
can select on-screen display language.
..General Setup Page..
English
French
..General Setup Page..
(The languages you can select may differ from different
countries or models)
..General Setup Page..
Tv Display 4:3 LB
Angle Mark On
Osd Lang ENG
Caption On
Screen Saver Off
Hdcd Off
Last Memory On
..General Setup Page..
Off
1X
2X
..General Setup Page..
Tv Display 4:3 LB
Angle Mark On
Osd Lang ENG
Caption On
Screen Saver Off
Hdcd Off
Last Memory On
..General Setup Page..
On
Off
Hdcd: When default setting is off, it will display CD
by reading HDCD, for HDCD playback, please
choose 1X or 2X.
Last Memory: Memorize the chapter you have
just watched. When last memory is on, if you turn
on the DVD again after off it will display form the
chapter you watched when you turn off the DVD.
DVD System Setup(Continued)
..Preference Page..
The Preference Page is only available when there is no disc
in the player. These settings are applied consistently to all
discs which are inserted and played.
Preference Page
TV Type: This player
supports different TV output,
including AUTO, NTSC, and
PAL systems.
Usually please set to MULTI.
Parental: The parental
control function works in
conjunction with the
different censorship classes
assigned to DVDs. These
classes help to control the
types of DVDs that the family
watches, There are up to 8
censorship classes for DVDs.
Note:
1 To change this setting you must enter your password.
(Initial password is 1234)
2 When set to Off, all discs may be viewed.
Password change:
You can change your password
by entering 4 digits. Your must
confirm the 4 digits before the
new password can be accepted.
NOTE:If you forget your password
or a password is accidentally set
enter 1369 as the password. This
will enable you to regain control.
..Preference Page..
..Preference Page..
2 G
3 Pg
4 Pg 13
5 Pgr
6 R
7 Nc17
8 Adult
Off
Old Password
New Password
Confirm Pwd
PAL
AUTO
NTSC
TV Type
Parental
Password
Default
Auto
TV Type
Parental
Password
Default
Auto
TV Type
Parental
Password
Default
Auto
Change
OK
SETUP
DVD System Setup(Continued)
Default: Resets all settings
(except password and parental
lock status) for this DVD player
back to the manufacturers
original settings. Press
OK to perform the reset.
Note:
Some functions may not be available depending on the type of disc.
..Preference Page..
Reset
TV Type
Parental
Password
Default
Auto
OK
SETUP
DVD System Setup(Continued)
The following discs can be played:
You cannot play discs other than those listed above.
You cannot play non-standardized discs, even if they may be labeled as above.
The performance of CD-R or CD-RW disc is depend on the way of disc-burning. In a few
cases, their performance may not be very well or even not playable.
Support discs: DVD, CD-R, CD-RW, HDCD, JPEG, CD+G, Kodak CD , W MA.
Playable Discs
Compare DVD disc with other discs:
DVD LD
Encode
method
Digital/MPEG
Analog
Capacity
133
minutes
242
minutes
266
minutes
484
minutes
Playing Time
Single-side
60 minutes
double-side
120 minutes
12cm
Disc diameter
30cm/20cm
Horizontal
resolution
More than 500 line
No more than
430 line
Multiple kinds
Picture
proportion
One kind
Subtitle
32 kinds
16 kinds
at most
Sound quality
48KHz, 96KHz/
6, 20, 24bit
44.1KHz/
16bit
Singleside
singlelayer
4.7G
Double
-side
single
-layer
8.5G
Singleside
doublelayer
9.4G
Doubleside
doublelayer
17G
Dics Protection and DVD Characteristics
Streaming Media Playing System
Start/Exit Streaming Media Playing System
1. Press SOURCE on the remote control unit to select the streaming media function.
2.Insert USB equipment into corresponding USB interface 2s after starting the system.
3. After entering the system menu, press Left / Right on the
remote control unit to select the require USB equipment press “OK” button to confirm the
selection and enter the interface .
5. To exit the streaming media playing system and watch a TV program, you must press “BACK”
button to return to the streaming media main menu at first(to protect equipment), and then
press SOURCE to select TV to return to the TV mode.
Notes:
1.While playing non-pictures or non-music files, press “MENU” or “SOURCE”,the
TV screen will be black and display corresponding menu.
2.While playing a USB ,press “BACK”, the screen picture will return to USB
main interface, and only at this time you can switch corresponding signal sources
by pressing “SOURCE” again.
4. Press Left / Righr to change pages then press UP / DOWN
on the remote control unit to select the required file, press OK button to enter the
selected file.
Streaming Media Playing System
Operating Method of Screaming Media Menu
1. Press UP / DOWN to scroll through main menu or submenu and select
your desired option.
2.Press “OK” to confirm your selection.
3.Press “(FWD)/(REV)” to achieve the FWD (fast forward) and REV (fast back) of
music being played.
the
4. Press "PLAY/PAUSE" to play and press it again to pause playing.
5.Press “ZOOM” to magnify pictures; in zoom mode, press “ Left / Right ” and
UP / DOWN to move the picture.
6.Press “ ” to stop playing ,or return to the previous menu, and press “BACK”
repeatedly to return to the main menu.
NOTE: You can choose the photos or music in different files to play together.
Streaming Media Playing System
Playing a Picture
1.After entering USB main interface, press
Left / Right to select “PHOTO” item.
2.Press OK to confirm the selection and
enter the picture playing interface.
3. Press Left / Righr to change
page and press UP / DOWN to
select the picture you want to play
press OK to enter the playing display
interface, and then press “PLAY” to paly the pictures.
Press ZOOM to magnify the picture and
then press Left / Right / UP /
DOWN to move the picture
Press Left / Right to select the
last or next picture.
Press UP / DOWN to rotate the
picture.
4.To exit playing, just press BACK repeatedly.
NOTE:The menu display varies with the photo name and pixel in your equipment.
Streaming Media Playing System
Playing Music
1. After entering USB main interface, press
Left / Right to select “MUSIC”.
2. Press OK to confirm the selection and
enter the music playing interface.
3. Press Left / Right to change
page and press UP / DOWN and “OK” button to
select the music you want to play then press
to play the music.PLAY
4. To exit music playing just press BACK
repeatedly.
Streaming Media Playing System
To assist in location possible faults use help guide below.
Note:
1.If the fault can not be repaired using the above guide consult with your local authorized service
center.
2.The TV set must only be repaired by a qualified registered service person. Never attempt to
remove the back cover as the TV set has dangerous voltages in side that may cause a fatally or fire.
Troubleshooting
No picture, no sound
Verify if the television is properly plugged in.
Verify if the television has a proper supplied power source.
Verify if electricity is available.
Blank screen
Verify if correct signals are input.
Operate the remote to change signal input to correct input.
Restart the television if power supply is interrupted.
No sound
Press MUTE button and verify if Mute mode is set.
Switch to other channel and verify if the same problem
happens.
Press VOL+ button to see if the problem can be solved.
Poor sound
Verify if sound system is correct. Refer to user's manual
for adjustment.
No picture in some
channel
Verify if correct channel is selected.
Adjust the antenna.
No color for some channel
program (black and white)
Verify if the same problem exists in other channels.
Check out of picture and sound systems.
Refer to relative instructions in the Manual for color
adjustment.
Spots with some or
all pictures
Verify if the antenna is correctly connected.
Verify if the antenna is in good condition.
Make fine adjustment of channel.
Television out of control
Disconnect the television from power supply and 10
seconds later, connect the television to the power supply.
If the problem still exists, contact authorized after-sales
service for technical assistance.
Troubleshooting Guide
Troubleshooting Guide
Note:
All specifications are subject to change without notice.
All quality are approximate value.
Specifications of the television that you have just purchased may
vary from the information in this table due to technical innovations.
Accessories
Picture, sound
system
Audio output
External input port
Power requirements
Temperature
2.5W+2.5W
COMPONENT input PC input S-VIDEO input Audio input
SCART Antenna input HDMI input USB input
~150-240V 50/60Hz
PAL/SECAM-B/G,I,D/K,L,L
Working:5 C~35 C
Storage:-15 C~45 C
Power consumption
50W
Model
Remote control
Batteries
Owner's manual
60W
Humidity
Working:20%~80%
Storage:5%~90%
19
22
Specifications
Loading...