Technika 22F22B-FHD,22F22B-FHD/DVD,24F22B-FHD,24F22B-HD,24F22B-FHD/DVD,24F22B-HD/DVD,24F22P-FHD/DVD,24F22P-HD/DVD,24F22W-FHD/DVD,24F22W-HD/DVD,24F22S-FHD/DVD,24F22S-HD/DVD User Manual

Full HD SMART LED TV Freeview & USB media player

User Guide

22F22B-FHD

22F22B-FHD/DVD

24F22B-FHD

24F22B-HD

24F22B-FHD/DVD

24F22B-HD/DVD

Model No

24F22P-FHD/DVD

24F22P-HD/DVD

24F22W-FHD/DVD

24F22W-HD/DVD
24F22S-FHD/DVD

24F22S-HD/DVD

Important safety instruction

Please read these instructions. All
the safety and operating instructions
should be read before the appliance
is operated.

Warnings

• This television does not contain any parts that are

serviceable by the user. In case of a fault, contact the
manufacturer or authorised service department.
Exposing the internal parts inside the TV may endanger
your life. The manufacturers guarantee does not
extend to faults caused by repairs carried out by
unauthorised third parties.

WARNING: Never place a television set on an
unstable location. A television set may fall,
causing serious personal injury or death. Many
injuries, particularly to children, can be avoided
by taking simple precautions such as:

• Use cabinets or stands recommended by the

manufacturer of the television set.

• Only use furniture that can safely support the

television set.

• Ensure the television set is not overhanging the

edge of the supporting furniture.

• Do not place the television set on tall furniture

(for example, cupboards or bookcases) without
anchoring both the furniture and the television
set to a suitable support.

• Do not place the television set on cloth or other

materials that may be located between the television
set and supporting furniture.

• Please educate children about the dangers of

climbing on furniture to reach the television set or its
controls.

• If your existing television set is being retained and

relocated, the same considerations as above should be
applied.

To prevent spread of fi re,
keep candles or other open
fl ames away from this product
at all times

• To reduce the risk of fi re, electric shock or damage

to the TV, do not expose it to dust, rain or moisture.
Never expose the TV to dripping or splashing and do
not place objects fi lled with liquids on or near the TV.

• Do not connect any external devices (DVD player,

games console etc) when the TV is switched on.
Disconnect both the TV and device from the mains
before connecting. Only switch appliances on when
the connection process is complete.

• Do not place the television in a confi ned space and

do not obstruct the ventilation openings at the rear of
the television.

• When installing on a wall, ensure the TV is at

least 5cm from the wall for ventilation.

• Always ensure that the TV’s ventilation openings

are not covered with items such as newspapers, table­cloths, curtains, etc.

• Dispose of this television and any components

including batteries in an environmentally friendly
manner. If in doubt, please contact your local authority
for details of recycling.

• Ensure this TV is used in moderate climates only.

Safety

• For your safety, this appliance is fi tted with a fused

3 pin mains plug. Should the fuse need to be replaced,
ensure that any replacement is of the same amperage
and approved with the BSI mark.

• Never try and replace the mains plug unless

you have adequate qualifi cations and are legally
authorised to do so. In the event that a replacement
mains cable is required, contact the manufacturer for a
suitable replacement.

• Never use the television if it is damaged in any way.

• Always place the television on a fl at level surface

avoiding anywhere which may be subject to
strong vibration.

• The ideal distance to watch the television is

approximately fi ve times the length of the diagonal
measurements of the TV screen.

• Ensure the television is not placed on top of the

power cable as the weight of the television may
damage the cable and cause a safety hazard.

• Never place mobile phones, speakers or any

other device which may cause magnetic or radio
interference, near the television. If interference is
apparent, move the device causing the interference
away from the television.

• To disconnect the set from the mains, remove the

mains plug from the socket.

• Ensure that the mains plug is always easily

accessible.

4

WARNING: Excessive volume when using
earphones and headphones can cause loss
of hearing.

5

Important safety instruction

Maintenance

• To clean your TV, wipe with a soft, dry cloth. If the

surfaces are extremely dirty, use a soft cloth dipped
in a soap and water solution or a weak detergent
solution.

• Never use alcohol, paint thinner or benzene to

clean this unit.

• Before using a chemically treated cloth, read the

instructions that came with the cloth carefully.

CAUTION: If water or other liquid enters the
television through the display panel surface,
a malfunction may occur.

Packaging

• The safest way to transport your item is in the

original box/packaging - please save your packaging
for this.

• You will need the original box/packaging in the

event of warranty/service repair or support. We are
unable to carry out warranty/service if you are unable
to package the item correctly.

• Time displays.

• Teletext: Do not view a stationary page for a long

period of time

• TV/DVD menus: e.g. listings of DVD disc content.

• Pause mode: Do not leave the TV in pause mode

for long periods of time, e.g. when watching DVDs
or videos.

Important: Once ‘shadow image/screen burn’
occurs, it will never disappear and is not
repairable under warranty.

How do I dispose of this product?

UK: Waste electrical products should not

be disposed of with household waste.
Please dispose of the product at a
designated collection point for recycling
of WEEE. For your nearest facilities, please
see www.recycle-more.co.uk or in store
for details.

ROI: Waste electrical products should
not be disposed of with household waste.
Separate disposal facilities exist. Check
with your local authority or retailer for
recycling advice.

Cd

Batteries

• Do not expose batteries to high temperatures,

excessive heat, prolonged sunshine or fi re as this may
cause leakage, explosion or ignition.
Observe the correct polarity when inserting batteries.

• Do not use different types of batteries together or

mix old and new batteries.

• Dispose of batteries in an environmentally

friendly way.

• Certain regions may regulate the disposal of

batteries. Please consult your local authority.

Important information regarding use of video
games, computers, captions or other  xed image
displays

The extended use of  xed image program material can cause
a permanent “shadow image” on the LCD/LED panel, also
known as “screen burn”.

This “shadow image” can appear in the background during
normal viewing. This type of irreversible LCD/LED panel
deterioration can be limited by observing the following steps:

1. Reduce the brightness/contrast setting to a minimum
suitable viewing level.

2. Do not display the  xed image for extended periods
of time.

3. Turn the power o when not in use.

Examples of images that are more likely to cause “screen burn”
are as follows (this is not an exhaustive list):

• TV channel logos: e.g. shopping channel logos

and pricing displays - especially if they are bright and
stationary. Moving or low-contrast graphics are less
likely to cause ageing of the screen.

5

Trademarks

The terms HDMI and HDMI High-De nition Multimedia
Interface, and the HDMI Logo are trademarks or registered
trademarks of HDMI Licensing, LLC in the United States
and other countries.

HDTV

The “HD TV” Logo is a trademark of DIGITALEUROPE.

HDTV 1080p

The “HD TV 1080p” Logo is a trademark of DIGITALEUROPE.

DVB

The DVB logo is the registered trademark of the Digital Video
Broadcasting (DVB) project.

FREEVIEW HD

The FREEVIEW HD words and logos are trade marks of DTV
Services LTD. © DTV Services Ltd.

SAORVIEW

SAORVIEW is a registered trademark owned by RTÉ.

For DTS patents, see http://patents.dts.com. Manufactured under
license from DTS Licensing Limited. DTS, the Symbol, & DTS and
the Symbol together are registered trademarks.
DTS TruSurround is a trademark of DTS, Inc. © DTS, Inc.
All Rights Reserved.

Manufactured under license from Dolby Laboratories.
Dolby, Dolby Audio and the double-D symbol are trademarks
of Dolby Laboratories.

CAUTION:

THIS UNIT IS A CLASS 1 LASER PRODUCT. THIS UNIT USES A VISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS
RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE THE PLAYER CORRECTLY AS INSTRUCTED.
WHEN THIS UNIT IS PLUGGED INTO THE WALL OUTLET, DO NOT PLACE YOUR EYES CLOSE TO THE OPENINGS TO LOOK
INTO THE INSIDE OF THIS UNIT.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.

CLASS 1
LASER PRODUCT

This caution label is located on the rear panel of the unit

6

7

CONTENTS

Manufacturers Guarantee Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5

Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

What is included in the box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Attaching/Detaching the Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Securing the TV to a Wall/ Wall mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-15

First Time Installation and Information Banner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

TV Buttons and Input Source Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Channel Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Picture Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20-21

Sound Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22-23

Time Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Lock Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Settings Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

USB Mode / Media Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

USB Record - Digital / Freeview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

DVD Setup Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31-37

Using your TV with a Sky digital set top box . . . . . . . . . . . . . . . . . . . . . . . . 31

Frequently Asked Questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32-33

Technical Specifi cations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34-37

7 Day TV Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

TV Menu Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19-27

7

What is included in the Box

WHAT IS INCLUDED IN THE BOX

Accessories

Included with this TV are the following accessories

1 x User Guide

User Guide

1 x Quick Start Guide

Quick Start

Guide

1 x Remote Control

2 x AAA Batteries

1 x Mini Component / YPbPr

1 x TV

1 x RF Cable

1 x Mini Composite / Video

1 x Stand plus screws

Please save your box/packaging as you will need this in the event of warranty/service repair or support.
We are unable to carry out warranty/service if you are unable to package it correctly. The safest way to
package your item in the event of warranty/service repair is in it’s original box/packaging.

8

9

Attaching/Detaching the Stand

ATTACHING/DETACHING THE STAND

Attaching the stand

To complete the stand installation you will require a cross head screw driver

There are two types of screws provided as shown below.

3 x ST (4x12)

Used for attaching the stand base
to the stand neck ( g.3)

3 x
M (4x12)

3 x M (4x12)

Used for attaching the stand neck
to the TV ( g.1)

11/2

12

(fi g.1) Attach the stand neck to the
rear of the TV set using the 3 x M(4x12)
screws provided.

HELPFUL ADVICE FOR FIRST TIME STAND INSTALLATION

3 x ST (4x12)

When securing the self-tapping screw/s into the base of the TV (on fi rst
installation) the screw/s may be naturally tight as they create a thread in the
plastic.

(fi g.2) Peel off the protective plastic cover
then attach the stand base to the stand neck.

a) Ensure the cross head screw driver tip fi ts correctly into the head of the
screw and that it is not too big or small.

b) Screw in all screws individually and partially before tightening all of the
screws fully.

3

c) If the screws become very tight try loosening and re-tightening, this will
continue the process of creating the thread.

(fi g.3) Secure the base to the neck by
using the 3 x ST(4x12) screws provided.

Detaching the stand

Remove the screws highlighted then remove the stand base and neck from the rear of the TV set.

9

Securing the TV to a Wall/Wall Mounting

SECURING THE TV TO A WALL

Securing the TV to a wall with anti-tip straps

For maximum security in the home when using a TV with its stand anti-tip straps should be fi tted. These
are available from supermarket websites and other websites and are an easy, inexpensive and effective
way of ensuring your TV stays safely upright. Straps are designed to be attached to the rear of the TV and
then tethered to the wall or the furniture the TV is stood on.

Note - Please ensure that children do not climb on the TV set.

A) Using one or both of the top wall-mounting
holes and screws (the screws are already supplied
in the wall mounting holes) fasten one end of the
fastening cord/s to the TV.

The Royal Society for the Prevention of Accidents is urging people to take care with fl at-screen televisions.

RoSPA stated in 2010 that “Toddlers are particularly at risk of pulling fl at-screen televisions on to
themselves. They are unsteady on their feet and are attracted by colourful television images.”

The risk is increased as televisions become lighter.

B) Secure the other end of the fastening cord/s to
your wall. (you will need screws/fi xings suitable
for your wall type - available separately from most
DIY stores).

Wall Mounting

IMPORTANT - Before drilling any holes in the wall ensure you are not drilling where
there could be any electrical wires, water or gas pipes.

TV wall mounting brackets are available to purchase separately from Tesco please visit www.tesco.com/direct.

1) Remove the four screws highlighted that are supplied in the wall
mounting holes.

2) The wall mount can now be easily attached to the mounting holes on the
rear of the TV.

For VESA wall mounting information please refer to the Technical
Specifi cation page.

For optimum viewing, if wall mounting the TV higher than eye level, the TV should be tilted downwards
so that the TV’s screen is ‘face on’. See fi g 1 and 2.

fig 1 fig 2

Important – If wall mounting this TV, only use the screws already provided in the wall mounting holes.
Using other screws which are longer could cause irreparable damage to internal parts. When using a
wall bracket, please ensure the screws in the back of the TV set are not over tightened.

INCORRECT

TV

Viewing angle

10

CORRECT

TV

Viewing angle

11

REMOTE CONTROL

Remote Control

1

2

3

4

STANDBY - Switch on TV when in standby or vice versa
MUTE - Mute the sound or vice versa
DTV - Switch to Freeview source
RADIO - Switch to radio whilst in Freeview source
USB - Switch to USB source
DVD - Switch to DVD source

NUMBER BUTTONS - 0 – 9 to select a TV channel directly.
TV GUIDE - Opens the 7 Day TV Guide (Freeview mode)

- To return to the previous channel viewed

VOL (+/-) - To increase / decrease the sound level
P.MODE - Scrolls through picture mode options
S.MODE - Scrolls through sound mode options
FAV - To display favourites menu
CH (+/-) - To increase or decrease the channel being watched
MENU - To display OSD menu
EXIT - To exit all menus

and adjust the system settings to your preference

SOURCE - To display the input/source menu
INFO - Press once for now/next channel information

Press twice for programme information about current
programme

ASPECT - To switch the screen between the different picture
formats

SLEEP - Press repeatedly to cycle through the sleep options
AUDIO - To change the audio language (if available)
SUBTITLE - To switch the dialogue at the bottom of the screen

(on/off)

TEXT - To enter/exit Teletext
TEXT HOLD - Teletext mode - Hold current page which is

displayed (Analogue TV)

DISPLAY - To switch off the screen when listening to radio
DVD MENU/RECORD - Access the DVD root menu and USB

record function
DVD SETUP/REC LIST - Opens up DVD Menu or Opens the list
of what has been previously recorded

- To restart the current chapter

- To advance forward to the next chapter

- To stop the playback/Eject Disc

(To EJECT the disc press/hold the button for 4 seconds)

- To play in fast rewind mode

- To play in fast forward mode

- To play/pause

TEXT/DVD ZOOM - Zoom function for Teletext and DVD
GOTO - To go to a specifi c chapter
A-B - Press once to set point, press a second time to return

to point

ANGLE - Select different angle of DVD
REPEAT - To repeat playback

- Allows you to navigate the on-screen menus

1

2

3

4

For Models with Integrated DVD players

For Models with PVR Function

For Models with USB Playback

11

TV Buttons and Input Source Menu

TV BUTTONS AND INPUT SOURCE MENU

This information is for models

without built in DVD players

Volume up

1

2

Volume down

3

Programme/Channel up and menu up

4

Programme/Channel down and menu down

Displays Menu/Back

5

6

Displays the input source menu

This information is for models

with built in DVD players

1

1

2

3

4

5

6

7

Stop/Eject Disc

1

2

Play/Pause Disc

3

Volume up

4

Volume down

Programme/Channel up and menu up

5

6

Programme/Channel down and menu down

2

3

4

5

6

7

8

9

Standby Power On/Off

7

Choosing Mode Input/Source

To switch between the different input/
connections.

A) Using the buttons on the remote control:

1) Press [SOURCE] - The source menu will appear.

2) Press [\/] or [/\] to select the input you require.

3) Press [OK].

B) Using the buttons on the Television:

1) Press [SOURCE].

2) Scroll up / down using CH+/ CH- buttons to
the input/source you require.

3) Press [SOURCE] to change input/source to the
one selected.

For further information on input/connections
please view ‘Connections’ pages.

Displays Menu/Back

7

Displays the input source menu

8

9

Standby Power On/Off

12

Example of Source menu

depending on the TV model

13

CONNECTIONS

Connections

I

K

J

I

H

A

A

Ethernet/LAN* Network Connection

B

YPbPr IN Component HD input (YPbPr)

C

AV IN Audio/Video input

SCART SCART input

D

E

HDMI 1 (ARC) HDMI input

F

HDMI 2 HDMI input

C

B

D

E

RF IN RF / TV Aerial Input

Optical audio Digital optical audio output

USB USB port

CI CARD IN Common Interface module

Earphones Earphone Output

F

G

G

H

I

J

K

*The Ethernet/LAN port is used for Freeview HD services only. (Freeview services are only available in the
UK). It is not intended to be used for internet/network use.

13

Connections

CONNECTIONS

Note: Connecting cables are shown for example only and may not be included. Please check ‘What Is
Included In The Box’ page.

Connecting to a device with Composite AV/Video output

TV Source should be set to Composite/AV

L (white)

R (red)

AV in

Connecting to a device with SCART output

TV Source should be set to SCART

Video
(yellow)

Scart

Scart

Connecting to a device with HDMI output

A HDMI cable can output both video and audio and enables you to enjoy digital-quality video and audio
with minimal loss of quality.

TV Source should be set to the corresponding HDMI port (HDMI 1, HDMI 2 etc)

HDMI HDMI

14

15

Connections

CONNECTIONS

Connecting to a device with Component/YPbPr output

If you are supplied with a cable from the device which has RED, GREEN, BLUE, RED & WHITE connectors
you must connect via Component (for picture) and by phono cable (for sound).

TV Source should be set to Component/YPbPr

Y (green)
PB (blue)

YPbPr

AV in

Video (yellow)
is not connected

PR (red)

L (white)
R (red)

Connecting to an external audio device (Amplifi ers, Surround Sound,
Sound Bars etc)

When connecting via the TV’s 3.5mm Earphone output, this will disable the TV speakers.

There are two options when connecting a device via the 3.5mm Earphone Output and the
Digital Optical Audio Output

3.5mm

earphone

Digital

audio

out

(optical)

OPTION 1 for 3.5mm EARPHONE Output

OPTION 2 for Digital Optical Audio Output

3.5mm
audio

in

Digital

audio

(optical)

in

Connecting an Ethernet/Network cable

The Ethernet port is used only for Freeview HD services only.

Ethernet
port

Ethernet
port

15

First Time Installation and Information Banner

FIRST TIME INSTALLATION

When the TV is fi rst set up and switched on you will be welcomed with the First Time Installation screen.

In the event the First Time Installation screen does not appear, press the MENU button on the remote
control, when the menu appears press 8-8-8-8 and then the First Time Installation menu will appear.

Language - Confi rm the language of the TV’s On Screen

Display menu.

Country - Confi rm the Country where the TV is

being tuned.

Default Viewing Source - Please select the default Input

source, the TV will switch to this Input Source once the
First Time Installation process is completed.

Environment - Please select the following presets:

• Home Mode - The default TV picture settings

will be set to Economy, this is the recommended
power saving mode which reduces the energy used
by up to 25% (by reducing the power to the LED/LCD
panel). The auto standby setting is set to 4 hours.

• Store Mode - The default TV picture settings will be

set to dynamic, which is a brighter picture setting.
The auto standby setting is set to OFF.

Continue with TV Installation - Press the OK button on the

remote control to confi rm your selections and complete
the First Time Installation process.

Note: we recommend the use of an outdoor aerial. If
you are missing channels, please ensure the RF cable
is connected securely. If there is a low signal strength,
you should consider connecting a signal booster and
re-tuning the TV.

Information Banner

The Information Banner is available in the Freeview/Saorview input source. When watching a Freeview/
Saorview channel press the INFO button on the remote control (fi g.1) and the Information Banner will
appear at the bottom of the screen (fi g.2). The Information Banner will also provide information on the
current TV channel and TV programme as well as the time and date. Please see below.

Press the INFO button once to view the Information Banner.

You can now:

Use the
Press the RED button to record
Press the GREEN button to set a reminder
Press the OK to watch the programme highlighted
Press the INFO button to view the TV programme description

buttons to scroll through the Freeview/Saorview TV channels

fi g.1

fi g.2

(Example of the Information Banner and a TV programme description).

16

17

7 Day TV Guide and Channel List

7 DAY TV GUIDE

TV Guide is available in Freeview/Saorview TV mode. It provides information about forthcoming
programmes (where supported by the Freeview/Saorview channel). You can view the start and end time of
all programmes and on all channels for the next 7 days and set reminders.

1) Press the TV GUIDE button on the remote control and the following 7 Day TV Guide will appear:

2) Navigate through the menu using

You can now:

Record a programme by pressing RED (USB device must be connected)
Set a reminder by pressing GREEN
View a previous day by pressing YELLOW
View the next day by pressing BLUE
View further information about the programme by pressing INFO

3) Press [EXIT] to exit the 7 day TV Guide

.

Channel List

To view the channel list, please ensure that the TV is set to either the analogue or digital source and
no menus or TV notifi cations are displayed.

1) Press [OK] on the remote control and the
channel list menu will appear.

2) Scroll through the channel list by using buttons then
press [OK] to view the channel that is currently highlighted.

3) Scroll through different types of channels such as Freeview/ALL/
Digital TV/Radio/data and HD channels by using

4) Press [EXIT] to exit the channel list.

buttons.

17

19

TV Menu Operation

CHANNEL MENU

To access this menu, press [MENU] button on the remote control.
To select a sub menu press [OK].

If you wish to make changes to any of the default settings, use the scroll buttons.
To confi rm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.

Auto Tuning - Allows you to retune the television for all digital channels, digital radio stations and

analogue devices.

Analogue Manual Tuning - Allows you to manually tune your analogue signal.

Freeview Manual Tuning - Allows you to manually tune your digital signal.

Channel Edit - Allows you to delete, move, skip and favourite channels.

Important: To receive Freeview channels, in particular
Freeview HD channels, you will need a Digital TV aerial
and be in a good Freeview coverage area. You can check
coverage for your postcode at www.freeview.co.uk

Please note that any Freeview HD channels found during
tuning will be placed in channel positions above 100.
For example, 101 (BBC1 HD) 102 (BBC2 HD) etc.

Signal Information - Allows you to view signal frequency, signal quality and signal strength.

Recorded List - Shows a list of recorded TV programmes.

CI Information - Pay per view services require a “smartcard” to be inserted into the TV. If you subscribe to

a pay per view service the provider will issue you with a ‘CAM’ and a “smartcard”. The CAM can then be

inserted into the COMMON INTERFACE PORT (CI Card In).

Schedule List - Lists your programme reminders.

Software Update (OAD) - Switch on/off OAD (over air download) updates.

Tip: If you do not press any buttons for 30 seconds, the menu will automatically exit. You can change
the length of time before the menu exits automatically - see ‘OSD Timer’ in the Time Menu

19

TV Menu Operation

PICTURE MENU

To access this menu, press [MENU] button on the remote control and scroll up/down.
To select a sub menu press [OK].

If you wish to make changes to any of the default settings, use the scroll buttons.
To confi rm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.

Picture Mode - Choose from the following presets:

Dynamic Recommended settings for fast moving pictures

Standard Standard settings

Movie Set to be lighter in colour and less bright

Personal Lets you manually alter all the settings

Economy Power saving mode which reduces the energy used by up to

25% (by reducing the power to the LED/LCD panel).

In Economy mode, the TV will switch itself to Standby mode

after 3-5 hours in the event that the TV buttons or remote

control buttons are not pressed (change the picture mode

to another setting to de-activate this function)

You can make the following adjustments in

Contrast - Switch the balance between black and white.

Brightness - Increase or decrease the brightness of the picture.

Colour - Increases the colour from black and white.

Tint - Lets you increase or decrease the level of tint within the picture

(only available for NTSC source signal).

Sharpness - Increase or decrease the sharpness of the picture.

Colour Temperature Choose from the following presets:

Normal Default settings

Warm Increases red within the picture

Cold Increases blue within the picture

Personal mode:

20

21

TV Menu Operation

PICTURE MENU

Aspect Ratio - Within the UK the picture format varies depending on the channel/broadcast. There are a

number of different options to best meet your needs

Auto

Automatically displays the best picture format so
the picture is in the correct position. Black lines may
appear at the top/bottom and/or sides.

Dot by dot

Will display the picture from the broadcaster without
any change, only available in HDMI input source.

16:9

Fills the screen with
a regular 16:9 signal
and 4:3 picture
format will be
stretched to fi ll
the screen

Full Screen

Displays a picture in
the full screen mode
with out overscan.
16:9 signal will be
displayed in original
proportion. Other
picture format will
be stretched to fi ll
the screen.

Zoom1 and Zoom2

The picture
is the correct
proportion
but zoomed
in to fi ll the
screen

4:3

Displays the 4:3
picture in its
original size.
Side bars are
shown to fi ll the
16:9 screen

Expert Settings: Please choose from the following options.

• Noise Reduction - Allows you to turn Noise Reduction ON or OFF.

• Active Contrast - Automatically optimises the ‘backlight’ and ‘contrast’ of the picture according to

the brightness of the screen. Choose one of the following options, ON or OFF.

21

TV Menu Operation

SOUND MENU

To access this menu, press [MENU] button on the remote control and scroll up/down.
To select a sub menu press [OK].

If you wish to make changes to any of the default settings, use the scroll buttons.
To confi rm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.

Sound Mode - Choose from the following presets

Standard Default settings

Music Emphasises music over voices

Movie Provides live and full sound for movies

Sports Emphasises sound for sports

Personal Selects your personal sound settings

Treble - To adjust the amount of high frequency within the sound.

Bass - To adjust the amount of low frequency within the sound.

Balance - To switch the sound between the left and right speakers.

Auto Volume Level (AVL) - When ‘on’ is selected, the volume will attempt to stay at a constant level

regardless of TV programme and advertisements.

DTS TruSurround - Choose from the following options:

Off Off

TM

TruSurround TruSurround

from two speakers, complete with rich bass, high frequency detail and clear dialog

creates an immersive, feature-rich surround sound experience

For DTS patents, see http://patents.dts.com. Manufactured under license from
DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are
registered trademarks. DTS TruSurround is a trademark of DTS, Inc. © DTS, Inc.
All Rights Reserved.

22

23

TV Menu Operation

SOUND MENU

Digital Output - This is the digital optical audio output. Choose from the following options:

Off To turn off Digital Output

Auto Selects the best settings automatically

PCM Select this option if you are connecting to a Stereo Hi-fi via digital audio cable

(Pulse-code modulation (PCM) is a digital representation of an analogue signal)

Audio Description - This allows the user to increase and decrease the AD (Audio Description) volume level.

(Audio Description is a service available on certain programmes. It provides a description of what is

happening during the selected programme for a person who is visually impaired).

AD Volume - This allows the user to increase and decrease the AD (Audio Description) volume level.

Audio Delay - Enables the user to adjust setting to sync picture and audio.

SPDIF Delay - Enables the user to adjust sound setting to sync picture and audio for external speakers

connected via digital audio output.

23

TV Menu Operation

TIME MENU

To access this menu, press [MENU] button on the remote control and scroll up/down.
To select a sub menu press [OK].

If you wish to make changes to any of the default settings, use the scroll buttons.
To confi rm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.

Auto Sync - Automatically syncs time and date.

Clock - Shows the date and time.

Off Time - Allows you to set a specifi c time for your TV to turn off.

On Time - Allows you to set a specifi c time for your TV to turn on, the channel it will then display, the

source it will be on and also the volume. This function can then be toggled to repeat every day or

a certain day.

Sleep Timer - Lets you set the sleep timer so the television automatically switches off after a set amount of

time. Off -> 10min -> 20min -> 30min -> 60min -> 90min -> 120min -> 180min -> 240min.

OSD Timer - Lets you adjust the amount of time the On Screen Menu stays on the screen before

disappearing.

Auto standby - Set Auto standby between Off, 3 hours, 4 hours and 5 hours.

Time Zone - Change your current time zone.

24

25

TV Menu Operation

LOCK MENU

To access this menu, press [MENU] button on the remote control and scroll up/down.
To select a sub menu press [OK].

If you wish to make changes to any of the default settings, use the scroll buttons.
To confi rm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.

System/Hotel Lock - Allows you to lock or unlock the menu. You will be asked to enter a 4 digit password

Use the

Change Password - Allows you to change the password.

Channel Lock - Allows you to lock certain channels manually.

Parental Guidance - Allows you to set the rating to block certain content based on age information.

Key Lock - Allows you to lock the buttons on the side of the TV set.

Default Source - Allows the user to set the default source. The default source is the source the TV starts on

when fi rst switched on.

Default Volume - Allows you to set the default volume on the TV. When the TV is put into standby mode

it will automatically be set that volume when the TV is switched on.

Default Channel - Allows the user to set a channel as the default channel on the Digital source. The

default channel is the channel the TV starts on when fi rst switched on.

Max Volume - Allows you to adjust and set the maximum volume.

Source Lock - Allows you to lock the source menu.

◄ button to quit the password input or use the ► button to clear. Default password is 0000.

25

TV Menu Operation

SETTINGS MENU

Setup - Enter the ‘Setup’ menu to access and adjust one the following settings:

• Language

• Audio Language 1 - Set the primary audio language.

• Audio Language 2 - Set the secondary audio language.

• Subtitle Language 1 - Set the primary subtitle language.

• Subtitle Language 2 - Set the sceondary subtitle language.

• Hearing Impaired - This allows the user to turn on the Hearing Impaired function, this

produces subtitles on the screen which provide a description of what is happening during the

selected program.

• Blue Screen - Changes the background when there is no input between clear and a blue background

(Only available on some sources).

• LED Status - Allows the user to switch the LED power indicator light ON or OFF when the TV is being

operated. (When this option is set to OFF the LED power indicator light will fl ash when the remote

control is used and will fl ash red during the normal start up process).

• First Time Installation - Allows you to access the First Time Installation menu and retune the TV set.

• Reset TV - This resets the menus to factory settings and clears all the TV channels from the television.

Network - Allows you to manually set your network settings on the TV (for more information please see

the ‘Network’ menu page).

PVR File System - Allows you to view the format and performance of a USB key.

HDMI CEC (Consumer Electronic Control) - Allows HDMI devices to control each other and allows the user

to operate multiple devices with one remote control (only available with compatible devices). Choose

from the following settings:

• Auto Standby - When the TV is put into standby mode, connected devices which support CEC will

also be put into standby mode.

• HDMI ARC - Sends audio signal from terrestrial/satellite broadcast via HDMI to an Audio receiver

without using any additional audio cables, this functions is only available via HDMI ARC port.

Software Update (USB) - From time to time we may release new fi rmware to improve the operation of

the television (available to download). This menu lets you install the new software/fi rmware onto the

television. Further details of how to do this will be issued with the fi rmware. Contact the helpline or refer

to the ‘product support’ section of the website.

Software Update (NET) - Allows you to update your TV with the newest software via your internet

connection.

Version info - Allows you to view the version/information of the software installed on the TV set.

- Allows you to change the language of the menu.

27

TV Menu Operation

NETWORK MENU

To access this menu you must fi rst access the Settings menu and select Network.

If you wish to make changes to any of the default settings, use the scroll
To confi rm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.

For the network confi guration to work the TV will need to be connected to your home network via an
ethernet cable, with these requirements in place the TV will connect to the network automatically.

The Network connection is used for Freeview HD services only. (Freeview services are only available in the
UK). It is not intended to be used for internet/network use.

IP Confi g - Allows you to access LAN network connection settings. Choose from the following modes:

Auto - The auto mode will automatically connect the TV to your home

network (this is the default setting and is highly recommended).

Manual - If the Manual moide is chosen you will able to scroll down and

manually change the IP, Netmask, Gateway and DNS information.

buttons.

Network Info - Allows you to view Information about network settings.

Network Test - Allows you to test the network connection.

27

USB Mode / Media Player

USB MODE/MEDIA PLAYER

USB mode offers playback of various different types of content that you have saved on your USB
Memory Stick.

On switching to USB source the below menu screen will appear. The content will be divided into Photo,
Music, Movie and Text based on fi le type.

1) You can navigate through the menus using the
scroll

you wish to play/view press [OK] button.

3) Whilst viewing your media, you can control the
item by using the remote control buttons (below)
or by pressing (Info) to access the on-screen
playback menu, you can now make your selection
by using the
remote control.

buttons. To confi rm the fi le type

and (OK) buttons on the

2) Select the drive you require. (If your drive only
has 1 partition you will only see 1 item). Once
the correct device has been selected you can now
access the fi le, press OK to view.

Tip: If you experience a playback issue, please ensure the fi les being used are the correct format
(example - the picture plays but no sound) See technical specifi cation page for compatible fi le types

28

USB Record

USB RECORD - FREEVIEW/SOARVIEW MODE

USB RECORD – FREEVIEW/SAORVIEW MODE
Built into this television is a USB record facility. This function is available in Freeview/Soarview mode
when used in conjunction with a compatible USB memory stick or USB hard drive. The benefi ts of this are as
follows:

• Pause live TV and then playback, fast forward and rewind (up to live TV)

• One button record, if you decide you want to record the current programme

• Easy programmable recording from the 7 day TV Guide

Due to the nature of the product, it is necessary to use a high speed USB memory stick (as the TV reads
from and writes to the memory stick at the same time, some memory sticks may not be suitable).

You can purchase high speed memory sticks from some computer stores, alternatively, we have a selection
of tested and compatible memory sticks available to purchase directly from the helpline/web site.

Recommended Minimum Specifi cation - USB Memory Stick

Read Speed 20 Mb/s (MegaBit Per Second)

Write Speed 6 Mb/s (MegaBit Per Second)

If you wish to use a USB portable hard drive
larger than 32GB, please refer to the FAQ
section at the rear of this user guide.

Pause Live TV (Time Shift)

Pausing Live TV is very simple.

- Press the play/pause button and the television will pause and the live

content will be recorded. To resume watching press play/pause again.

- Press fast forward to go forward in a recording (i.e. to skip adverts).

- Press fast rewind to go back in a recording (i.e. if you fast forwarded

too far).

Tip: When you switch the TV to standby or change channel the Time Shift memory is wiped. To restart
time shift you must press play/pause button.

One Button Record

At any point in time you may decide to record the current programme that you are watching. To do this
you need to press the red button highlighted below.

Playback fi les from Record list

To playback recorded fi les you will be required to have the TV set to the Freeview/Saorview source mode.
Once set to the correct source, access the recorded list by pressing the REC LIST (Recorded List) button on
the remote control, the recorded list should now appear on the screen, press OK on the chosen fi le to start.

Tip: This television contains one TV tuner, therefore it can only record the channel you are watching or
record one channel while the television is in standby mode.

Note: USB record function is only available in Digital/Freeview TV mode. Due to copyright laws and
illegal copying/recording it is not possible to record to/from any other input/output source.

DVD Setup

DVD SETUP

To enter this menu please ensure the TV is in DVD source & press [DVD SETUP]

If you wish to make changes to any of the default settings, use the scroll
To confi rm any settings press [OK] button. To exit this menu at anytime, press [DVD SETUP] button.

TV Display - Choose from the following options

4:3 Pan scan PS Traditional picture format, often used on old fi lm

4:3 Letter box LB Traditional picture which has been adapted for widescreen

Wide 16:9 Widescreen picture format

Speaker Setup - Choose from the following options

LT/RT Converts from multi-channel sound to mono

Stereo Converts from multi-channel sound to stereo

Applies to models with built-in DVD players only

buttons.

Dual Mono - Choose from the following options

Stereo Outputs 2 channels of sound both left and right

Mono L Outputs left side sound

Mono R Outputs right side sound

Mix Mono Outputs a single channel of sound but mix between right and left

Dynamic Range - This is the difference between the quietest and loudest sounds. This setting works only

with DVD discs recorded in Dolby digital.

Full Set this to listen with the range recorded on the disc

3/4 Set this to listen with a range equivalent to a normal television

1/2 Set this to listen with a smaller difference between the maximum and minimum volume

1/4 Set this to listen with a smaller difference between the maximum and minimum volume

Off Set dynamic range to off

TV Type - Choose from the following options

PAL For discs from UK/Europe, Asia, Australia etc

Multi For both NTSC and PAL

NTSC For discs from North America, Japan etc

Default - Choose from the following options

Reset Resets all options in the ‘DVD setup’ menu back to the default settings

Tip: This TV/DVD player is pre-set to play Region 2 DVDs. In the event you wish to use the TV/DVD in
another country that uses different region discs, please visit www.umc-uk.co.uk. Select ‘Product Support’,
‘Changing Region’.

30

31

General Information

USING YOUR TV WITH A SKY DIGITAL SET TOP BOX

Option 1) Connecting your TV to your Sky box (when both the TV and Sky Box are located
in the same room)

Depending on your Sky Box & TV model, connect either by SCART or HDMI cables
(available separately) .

If connecting by SCART, select the ‘Input source’ on the TV as SCART. If your TV does
not have SCART, please refer to ‘Connections’ pages in this user guide for alternative
ways to connect.

If connecting by HDMI, select the ‘Input source’ on the TV as HDMI (if the TV has more
than 1 HDMI port, ensure you select the input source to match the HDMI numbered port

SCART or
HDMI cable

on the rear of the TV).

If you wish to use your Sky remote to operate the TV’s functions, you will need a Sky

Sky Box

remote control (Revision 9 or later) and you will need to program a 4 digit code into it.
See bottom of this page.

Option 2) Connecting your TV
to your Sky box (when your
Sky box is located in a different
room to the TV)

Please note, if you are adding a ‘Magic
Eye/TV Link’ to your system so that
you can use your Sky remote control
to change the Sky channel in the room
where the 2nd TV is located, please

HDMI or
SCART cable

RF/COAX cable from
Sky Box to 2nd TV

refer to the instructions included
with the TV link/magic eye in order to
ensure the RF or RF2 output on your
Sky box is powered on. (The red LED
light on the TV link/magic eye will light

Sky Box

Connect to RF
or RF2 output
on the Sky box

up if the RF / RF2 output is correctly set
up) If you do not have the instructions that came with the TV link/magic eye, instructions on how to do it can be
found on our web site.

Connect to the
Aerial/RF input
on the 2nd TV

TV Link/Magic Eye
(optional)

2nd TV in
another room

1) To tune the TV to the Sky box, on the 2nd TV, select the ‘Analogue’ input source.

2) Select the channel that you wish to store the Sky box/channel on. (If you do not use channels 1-5 because you
no longer have analogue terrestrial channels after digital switchover, you may choose to select channel 1 to store
the Sky box/channel, if you still have and use analogue channels 1-5, you may for example decide that channel 6 is
the best option for you)

3) Press the corresponding number on the remote control to select the desired analogue channel chosen as per
point 2 above.

4) On the TV remote control, press Menu. Now navigate through the menus to select Manual Tuning or Analogue
Manual tuning (refer to the Tuning/Channel menu section of this user guide if necessary)

5) Manually tune in the channel (usually, the Sky box is at a frequency between 800Mhz and 850Mhz) once the
Sky box/channel is found, press ‘OK’ to store it.

If you wish to use your Sky remote to operate the TV’s functions, you will need a Sky remote control (Revision 9 or
later) and you will need to programme a 4 digit code into it. See below.

Using a Sky remote or a universal remote to operate your TV

Sky remote control - If you wish to use your Sky remote to operate the basic functions of your TV, you need to
program a 4 digit code into it. Please note - you will need a Sky Revision 9 remote control (or later). The code
required for this television is 2134. If you wish to upgrade/replace your existing Sky remote control to the latest

version, you can do so on our website.

Universal remote control - If you wish to use a Universal remote control to operate your TV, please refer to the
website for a full list of codes. (Please note we only have codes for One for All branded remote controls, if you
have an alternative brand of Universal remote, please refer to the manufacturer for the code.)

31

General Information

FREQUENTLY ASKED QUESTIONS

General I would like to have louder

General Why are some options in the

General Can I stop my TV automatically

TV I have tuned in Digital TV but I

TV I have re-tuned my television

VCR/DVD
Recorder

sound by connecting additional
speakers.

menu unavailable and greyed
out.

turning o after 4hrs?

am not receiving any or all of the
channels and/or the channels I
receive are breaking up.

but when I switch it o it is not
storing the channels.

I have connected the TV to my
VCR or DVD Recorder via SCART
but it is not recording.

option 1) Use the 3.5mm headphone output and a 3.5mm to phono cable (available
separately) to connect to an ampli er/surround sound system. Please note this will
deactivate the TV’s built in speakers.
option 2) Connect a digital optical audio output cable from the TV’s digital optical audio
output to your ampli er/surround systems digital optical audio input.

Some options are only available in certain sources, i.e. HDMI. They are unavailable in the
other sources where they have no e ect.

Yes, in the ‘Time’ menu settings, scroll down to Auto standby and select OFF.

1) Check you are in an area that can receive Freeview/Saorview, visit www.freeview.co.uk or
www.saorview.ie

2) Check you are using an aerial that is able to receive a good digital signal. In most cases,
you will need an outdoor digital hi-gain/wideband aerial. In areas that have excellent
digital coverage, you may be able to use a loft type aerial but it is highly likely that you will
also need to connect a booster between the back of the TV and the TV aerial wall socket.
Unfortunately, to receive a good enough digital signal, it is not possible to use a portable/
indoor type aerial.

If the TV does not save the channels when you power it o , it’s likely the channel database
has become corrupt.

1) Turn o the TV.

2) Remove the RF/Aerial cable from the rear of the TV and then turn the TV back on again.

3) Using the remote control, press Menu followed by 8-8-8-8 to enter the initial setup/ rst

time installation menu.

4) Press OK (let the TV run the full tuning process).

5) Once completed, turn o the TV, reconnect the RF/Aerial cable then turn the TV back

on again.

6) Repeat steps 3 & 4.

In addition to connecting via SCART, you should connect the aerial cable from the wall
socket to your VCR/DVD Recorder and another aerial cable from the VCR/DVD Recorder to
the TV.

Game Consoles I have connected my

Playstation/Xbox to the TV via
HDMI, but I am not receiving
any pictures or sound on my
Television.

Game Consoles I have connected my

Playstation/Xbox to the TV via
Component cables (red, green
& blue) but I am not receiving
any sound.

System Lock I have changed the password

on the television and now
forgotten it.

1) Ensure the TV is set to on the correct HDMI source.

2) Check your settings on your Playstation/Xbox are as per the Playstation/Xbox
instruction manual.

Component cables only provide HD pictures. For the sound you will need to connect the red
& white audio cables on the Playstation/Xbox to the red & white phono inputs (or mini AV
input where  tted) on the rear of the TV. Please refer to the ‘Connections’ pages.

There is a master password of 4711, to gain access to the TV menu and reset the
normal password.

32

33

General Information

FREQUENTLY ASKED QUESTIONS

USB Mode I have inserted a USB Memory

USB Mode Using a USB portable hard drive

DVD (For TV models
with DVD only)

DVD (For TV models
with DVD only)

USB Record I cannot change the channel,

USB Record When using the USB to record

Key, but the TV does not
recognise it.

larger than 32GB.

I have inserted a disc but it is
not playing.

I have pressed the eject button
but the disc is not coming out.

access the menu or use the red
button.

the picture ‘breaks up’ or
experience loss of sound.

Ensure the USB Memory Key is formatted to type FAT32.

If you wish to use a portable hard drive larger than 32GB, please note that it must be
formatted to the FAT32  le system in order to operate on this TV. Windows XP/Vista
computers are only capable of formatting up to 32GB, therefore, you will need a software
programme/utility to format larger hard drives.
Please refer to the website, www.umc-uk.co.uk, for more information.

1) Ensure you have inserted the disc facing the correct way.

2) Ensure the disc is clean and is not scratched.

3) Some copied discs will not play.

4) Check the DVD is a region 2 disc – to change the region of the DVD player, refer to
www.umc-uk.co.uk, select ‘Changing DVD Region’ in the ‘Product Support’ section

To eject the disc hold the stop/eject button for 4 seconds.

During time shift (pause live TV) you cannot change the channel, access the menu or use the
red button.

Check the USB memory stick meets the minimum read speed requirements. Standard
de nition channels require a read speed of 20 MB/s (Mega Byte per second) and a

write Speed of 6 MB/s (Mega Byte per second) HD channels require the read speed of 80
MB/s (Mega Byte per second) and a write speed of 40 MB/s (Mega Byte per second). USB 3.0
sticks should be used where possible.

Freeview HD I cannot access all Freeview

channels.

Freeview HD I cannot  nd the Freeview HD

channels.

Some data channels for Freeview can only be obtained when the TV ‘s ethernet port is
connected to your router.

Freeview HD channels found during tuning will be placed in channel positions above 100.
For example, 101 (BBC1 HD), 102 (BBC2 HD) etc.

33

General Information

TECHNICAL SPECIFICATION

Product  che (22” Full HD Models)

Trademark

Technika

Model ID

22F22B-FHD/DVD

22F22B-FHD

(Models with inbuilt

DVD player)

Energy e ciency class A

Visible screen size (diagonal) 55 cm / 21.5 inches

On mode power consumption 20.0 W

Annual energy consumption *1 30 kWh

Standby power consumption *2 <0.50 W

O mode power consumption 0 W

Screen resolution 1920 (H) x 1080 (V)

*1: Energy consumption XYZ kWh per year, based on the power consumption of the television
operating 4 hours per day for 365 days. The actual energy consumption will depend on how the
television is used.
*2: When the TV is turned o with the remote control/standby button and no function is active.

Additional Technical Information

RF 75 ohm Antenna / Analog / DVB

Inputs 2 x HDMI, 1 x USB, 1 x SCART, 1x RJ45 LAN/Ethernet,

1 x Mini Composite/Video & L/R Audio shared

for Composite/Video & Component/YPbPr,

1 x Mini Component/YPbPr

Sound Outputs 1 x 3.5mm Headphone/Audio out,

1 x Digital Optical Audio Out

Speaker / Sound Watts (RMS) 2 x 5 / 2 x 3

Voltage and power consumption 110-240V 50 / 60Hz

20/40W (ecomode/max)

(<0,5W in Standby)

(0W in OFF mode)

Dimensions including stand (mm)

Net weight (Kgs) 4.1 4.4

Wall Mounting VESA 100 x 100 (mm)

510W x 355H x 140D

110-240V 50 / 60Hz

20/50W (ecomode/max)

(<0,5W in Standby)

(0W in OFF mode)

34

35

TECHNICAL SPECIFICATION

Product  che (24” HD Ready Models)

General Information

Trademark

Model ID

24F22B-HD

Technika

24F22B-HD/DVD

24F22W-HD/DVD

24F22P-HD/DVD
24F22S-HD/DVD

(Models with inbuilt

DVD player)

Energy e ciency class A

Visible screen size (diagonal) 60 cm / 23.6 inches

On mode power consumption 25.0 W

Annual energy consumption *1 37 kWh

Standby power consumption *2 <0.50 W

O mode power consumption 0 W

Screen resolution 1366 (H) x 768 (V)

*1: Energy consumption XYZ kWh per year, based on the power consumption of the television
operating 4 hours per day for 365 days. The actual energy consumption will depend on how the
television is used.
*2: When the TV is turned o with the remote control/standby button and no function is active.

Additional Technical Information

RF 75 ohm Antenna / Analog / DVB

Inputs 2 x HDMI, 1 x USB, 1 x SCART, 1x RJ45 LAN/Ethernet,

1 x Mini Composite/Video & L/R Audio shared

for Composite/Video & Component/YPbPr,

1 x Mini Component/YPbPr

Sound Outputs 1 x 3.5mm Headphone/Audio out,

1 x Digital Optical Audio Out

Speaker / Sound Watts (RMS) 2 x 5 / 2 x 3

Voltage and power consumption 110-240V 50 / 60Hz

25/40W (ecomode/max)

(<0,5W in Standby)

(0W in OFF mode)

Dimensions including stand (mm)

Net weight (Kgs) 4.5 4.9

Wall Mounting VESA 100 x 100 (mm)

560W x 386H x 140D

110-240V 50 / 60Hz

25/50W (ecomode/max)

(<0,5W in Standby)

(0W in OFF mode)

35

General Information

TECHNICAL SPECIFICATION

Product  che (24” Full HD Models)

Trademark

Model ID

24F22B-FHD

Technika

24F22B-FHD/DVD

24F22W-FHD/DVD

24F22P-FHD/DVD
24F22S-FHD/DVD

(Models with inbuilt

DVD player)

Energy e ciency class A

Visible screen size (diagonal) 60 cm / 23.6 inches

On mode power consumption 25.0 W

Annual energy consumption *1 37 kWh

Standby power consumption *2 <0.50 W

O mode power consumption 0 W

Screen resolution 1920 (H) x 1080 (V)

*1: Energy consumption XYZ kWh per year, based on the power consumption of the television
operating 4 hours per day for 365 days. The actual energy consumption will depend on how the
television is used.
*2: When the TV is turned o with the remote control/standby button and no function is active.

Additional Technical Information

RF 75 ohm Antenna / Analog / DVB

Inputs 2 x HDMI, 1 x USB, 1 x SCART, 1x RJ45 LAN/Ethernet,

1 x Mini Composite/Video & L/R Audio shared

for Composite/Video & Component/YPbPr,

1 x Mini Component/YPbPr

Sound Outputs 1 x 3.5mm Headphone/Audio out,

1 x Digital Optical Audio Out

Speaker / Sound Watts (RMS) 2 x 5 / 2 x 3

Voltage and power consumption 110-240V 50 / 60Hz

25/40W (ecomode/max)

(<0,5W in Standby)

(0W in OFF mode)

Dimensions including stand (mm)

Net weight (Kgs) 4.5 4.9

Wall Mounting VESA 100 x 100 (mm)

560W x 386H x 140D

110-240V 50 / 60Hz

25/50W (ecomode/max)

(<0,5W in Standby)

(0W in OFF mode)

36

37

TECHNICAL SPECIFICATION

Compatible fi les in USB Mode

Codec

Media File Ext.

Video

Audio

General Information

Remark

MOVIE

.mpg

.avi

.ts

.mov
.mkv

.dat MPEG-1

.mp4

.vob MPEG-2

.mp3 -- MP3

MPEG-1, MPEG-2

Xvid,

MJPEG

MPEG-4 SP/ASP,

H.263/H.264

MPEG-2,

HEVC

H.264,

MPEG-4 SP/ASP,

H.263/H.264,

HEVC

MPEG-4 SP/ASP,

H.263/H.264,

HEVC

MPEG-1, MPEG-2

MP3, AAC,
AC3, PCM,

Max Resolution: 1920x1080
Max Data Rate: 40 Mbps

Max Resolution: 1920×1080
Max Data Rate: 20 Mbps

Max Resolution: 720×576
Max Data Rate: 40 Mbps

Sample Rate: 8K~48KHz

Bit Rate: 32K~320Kbps

MUSIC

.m4a/.aac -- AAC

.jpg/ Progressive JPEG Max Resolution: 1024×768

.jpeg Baseline JPEG Max Resolution: 15360×8640

PHOTO

SUBTITLE

.bmp BMP

.png

.srt SubRip

.ssa/.ass SubStation Alpha

.smi SAMI

.sub

.txt TMPlayer

Sample Rate: 16K~48KHz
Bit Rate: 32K~442Kbps
Channel: Mono/Stereo

Max Resolution: 9600×6400
Pixel Depth: 1/4/8/16/24/32 bpp

Non-Interlaced Max Resolution: 9600

Interlaced Max Resolution: 1280×800

SubViewer

MicroDVD

DVDSubtitleSystem

SubIdx(VobSub)

SubViewer 1.0 & 2.0 Only

×6400

37

TEC/MAN/0100