Technics SL-1200GLD, SL-1210M5G User Manual

Turntable System
Operating Instructions
Model No.
SL-1210M5G SL-1200GLD
PP
Before connecting, operating or adjusting this prod­uct, please read these instructions completely. Please keep this manual for future reference.
RQT7021-2Y
Dear customer

Supplied accessories

Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully.
The illustrations and photograph in this manual are of the SL­1210M5G model.

Table of contents

Supplied accessories................................................................... 2
IMPORTANT SAFETY INSTRUCTIONS ....................................... 3
Features ......................................................................................... 4
Preparation of the cartridge ........................................................ 4
Controls ......................................................................................... 4
Putting the player together ......................................................... 5
Connections and installation ...................................................... 5
Connecting to an amplifier and AC power supply cord ............. 5
Connecting to an Audio Mixer (not included) ............................ 6
Installation .................................................................................. 6
Preparatory adjustments ............................................................. 6
Horizontal balance and stylus pressure .................................... 6
Anti-skating ................................................................................ 7
Armlift height .............................................................................. 7
Tone arm height ......................................................................... 7
Fit the dust cover ....................................................................... 7
Playing records ............................................................................. 8
Adjustments while using the unit ............................................... 9
Pitch control ............................................................................... 9
Adjusting tone arm horizontal weight to reduce skipping when
scratch playing. .......................................................................... 9
Adjusting the turntable brake speed .......................................... 9
Maintenance ................................................................................ 10
Product service ........................................................................... 10
Troubleshooting guide................................................................ 11
Specifications .............................................................................. 11
User memo:
DATE OF PURCHASE
DEALER NAME
DEALER ADDRESS
TELEPHONE NUMBER
Please check and identify the supplied accessories. Use numbers indicated in parentheses when ask­ing for replacements parts.
(Only for U.S.A.)
To order accessories contact 1-800-332-5368 or the website (http://www.pasc.panasonic.com).
Turntable ................. 1pc.
SL-1210M5G(SFTE172-01Z1) SL-1200GLD(SFTE172-02Z)
Turntable mat .......... 1pc.
SL-1210M5G/SL-1200GLD (RGS0008)
Disc slip sheet set (included
only with SL-1210M5G) ....
(RGS0005Z-1)
Disc slip sheet
Transparent sheet
Golden slip sheet (included only with SL-1200GLD) .. (RGS0012Z)
Dust cover ............... 1pc.
SL-1210M5G(RYF0370A-X) SL-1200GLD(RGD0078AZ-T)
Head shell (with stylus
weight) ..................... 1pc.
SL-1210M5G(SFPCC31006K) SL-1200GLD(SFPCC31007K)
A cartridge is not included.
Balance weight ....... 1pc.
SL-1210M5G(SFPWG17201BK) SL-1200GLD
Auxiliary weight ...... 1pc.
SL-1210M5G(SFPWG17202) SL-1200GLD(RFE0024)
EP record adaptor .. 1pc. SL-1210M5G(SFWE010A)
1
SL-1200GLD(SFWE010B)
Shell weight ............ 1pc.
SL-1210M5G/SL-1200GLD (SFPZB3501)
Overhang gauge ..... 1pc.
SL-1210M5G/SL-1200GLD
2
(SFK0135-01)
Screw set for cartridge .. SL-1210M5G/SL-1200GLD
Nuts
Screws-short(SFCZV8801-1)
Screws-long(SFPEV9801-1)
Washers
Sticker ...................... 1pc.
SL-1210M5G(RQLC0142-1) SL-1200GLD(RQLC0111-1)
(RYQ0156-N)
(RHN26003)
(SFPEW9601)
1
2
RQT7021
The model number and serial number of this product can be found on either the back or the bottom of the unit. Please note them in the space provided below and keep for future reference.
MODEL NUMBER
SERIAL NUMBER
SL-1210M5G/SL-1200GLD
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE, DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.
CAUTION!
DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE. ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS.
Although the AC power switch is in the “off” position, the unit is not completely disconnected from the mains. Remove the plug from the main electrical outlet if you will not be using the unit for an extended period of time. Place the unit so the plug can be easily removed.
The following mark and symbols are located on bottom of the unit.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE SCREWS. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of suffi­cient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

IMPORTANT SAFETY INSTRUCTIONS

Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat reg­isters, stoves, or other apparatus (including amplifiers) that pro­duce heat.
9) Do not defeat the safety purpose of the polarized or grounding­type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particu­larly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufac­turer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normal­ly, or has been dropped.
THE FOLLOWING APPLIES ONLY IN THE U.S.A.
CAUTION:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
¡Reorient or relocate the receiving antenna. ¡Increase the separation between the equipment and re-
ceiver.
¡Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
¡Consult the dealer or an experienced radio/TV technician
for help.
Any unauthorized changes or modifications to this equipment would void the user’s authority to operate this device.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
3
RQT7021

Features

A masterpiece amongst turntables with a worldwide repu­tation. Highly accurate turntable speed maintained continuously with a quartz pitch control.
The [±16/±8] button can control a wide range between –8 % and
+8 % and –16 % and +16 %.
The [±16/±8] indicator LED illuminates in the dark.
The pitch can be varied throughout the range maintaining perfect
accuracy.
Pitch can be instantly reset to the rated speed (33 1/3 or 45 r/min)
with the reset button.
The pitch control slider can be easily replaced.
The direct drive produces high torque.
Wow and flutter below 0.01 %. Starting torque of 1.5 kg-cm en-
abling the turntable to reach 33 1/3 r/min in 0.7 seconds.
Smooth stops are achieved with a fully electronic braking system.
The braking speed can be adjusted with the brake speed control knob.
Tone arm with gimbal suspension
Using the balance weight control measurement units on the tone
arm, you can quickly change stylus pressure settings to the appro­priate pressure.
Stylus skipping can be reduced using horizontal weight control for
scratch play.
The tone arm can be finely adjusted in a range of 6 millimeters
with the lockable height control.
Anti-vibration design with 3 layer cabinet construction and large insulating legs. Pop-up stylus light.
A blue LED light illuminates the stylus.

Preparation of the cartridge

1 Attach a cartridge (not included).
Follow the cartridges instructions to correctly attach it to the head shell.
Use the included shell weight when using a light cartridge
(3.5 to 6.5 grams).
Remove the stylus weight.
Using the stylus weight ( page 6).
Stylus weight
Screws
Shell
weight
Head shell
Lead wire
Terminal
Cartridge

Controls

No. Name Reference page(s)
EP record adaptor . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Turntable base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Turntable mat (Or disc slip sheet) . . . . . . . . . . . . . . 5
Turntable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Center spindle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Strobe mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Power switch (power) . . . . . . . . . . . . . . . . . . . . . . . . 8
Strobe light, pilot lamp . . . . . . . . . . . . . . . . . . . . . . . 8
Start-stop button (start-stop) . . . . . . . . . . . . . . . . . . 8
Speed select buttons (33, 45) . . . . . . . . . . . . . . . . . . 8
Shell stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Arm-height control . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Horizontal weight control knob . . . . . . . . . . . . . . . . 9
Balance weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Stylus pressure control . . . . . . . . . . . . . . . . . . . . . . . 6
Arm lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Anti-skating control . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Cue lever . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Arm clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Arm rest . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Tone arm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Pitch indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Pitch control (pitch adj.) . . . . . . . . . . . . . . . . . . . . . . 9
Locking nut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Head shell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Reset button (reset) . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Variable range pitch button (±16/±8) . . . . . . . . . . . . 9
Stylus light switch . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Stylus light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
4
RQT7021
Stylus
2 Adjust the overhang.
Fit the included overhang gauge to the head shell. Adjust the overhang and facing of the cartridge and tighten the screws.
Line the stylus tip up with the end of the gauge.
The cartridge should be parallel on the shell head.
Screws
Stylus tip
52 mm
Overhang gauge
Loading...
+ 8 hidden pages