Technicolor COM1001 Brochure

COM

High-Definition and Standard-Definition
Satellite Free-to-Guest Head End

Technicolor, world-wide leader in video technologies, presents the COM1000 High-Definition and Standard-

Definition satellite headend solution designed specifically to serve the Hospitality “Free-to-Guest” market.

Compact Form Factor

The COM1000 oers up to 24 HD channels or 36 SD channels
and an EdgeQAM in only 4 units of rack space. This compact
design also results in dramatic power savings from typical stacked
receiver solutions.

Pro:Idiom™ Copy Protection

For High-Definition solutions which require copy protection, the
COM24 HD receiver blade adds Pro:Idiom encryption to the
HD content which can be played back on any Pro:Idiom enabled

receiver device or Television.

Integrated EdgeQAM

Available as a plug-in module for the COM200 chassis, the
QAM24 reduces overall systems costs and simplifies the installation
and maintenance for the COM1000.

On-Screen Program Guide

The COM1000 is the only Free-to-Guest solution including an on­screen channel guide which is configurable with your unique logo.

Features at a Glance

24 HD channels, 36 SD channels or a mix of SD and HD
in one chassis

Pro:Idiom™ content protection for HD broadcasts

Integrated 12 x 256 EdgeQAM

Configurable On-screen program guide

QAM or IP output for a variety of applications

Less than 320 watts power consumption

Remote Management & Configuration

Supports Multiple Chassis configurations for high channel
count applications

Remote Management

The COM1000 including all the receiver blades and EdgeQAM
can be managed and monitored remotely over the internet or local
network using a simple web-browser based management interface.

COM1000

High-Definition and Standard-Definition
Satellite Free-to-Guest Head End

COM1000 Components

COM24 -HD Receiver Blade

COM1000 Product Summary

2 HD channels
MPEG2 and MPEG4 support
UDP/RTP Video Output
Pro:Idiom™ content protection
2 RF inputs, 1 Fast Ethernet
2 Tuner Lock LEDs, 1 Power LED
SWM compatible

FLX24-HD Capable Receiver Blade

2 HD channels or 3 SD channels
Firmware upgradeable to support Pro:Idiom™

content protection
UDP/RTP Video Output
1 RF input, 1 Fast Ethernet
3 Tuner lock LEDs
SWM compatible

XDR24-MPEG4 to MPEG2 Transcoder

Transcodes 2 HD streams from a COM24
receiver blade

Used in applications where only MPEG2 TVs
are available

RJ45 Fast Ethernet Input

One chassis for both HD and SD channels

Less than 320W power consumption fully loaded

Can be daisy-chained for higher channel count
installations

Hot swappable receiver blades

Integrated Fast Ethernet backplane with Gigabit
Ethernet external connection

Redundant power supplies

Integrated dual cooling exhaust fans

Chassis Dimensions: 4RU (7”H x 17”W x 13”D)

12 COM24 or FLX24 blade slots

Ships with Ethernet Output slot

TECHNICOLOR USA, INC.
101 W. 103rd St.
Indianapolis, IN 46290
Tel: [phone]

www.technicolor.com

QAM24-12x256 EdgeQAM

Supports up to 24 HD channels or 96 SD channel
Able to mix HD and SD content
Will accept MPEG over IP content from external

sources
Fits into Ethernet Output slot

SALES CONTACT

For more information please get in touch with your
usual representative or use the following email:

[e-mail]

© Copyright 2010 Technicolor. All rights reserved.
All tradenames referenced are service marks, trademarks,
or registered trademarks of their respective companies.
Specifications subject to change without notice.