Technicolor CGA4233 Quick Setup Manual
CGA4233
Quick Setup Guide
1
1. Before you start
Carefully read the Safety Instructions and Regulatory Notices document included
in your package before continuing with the installation of your CGA4233.
2. Check the content of your package
D
C
A
B
E
Besides this Quick Setup Guide, your package contains the following items:
Item Description
A One CGA4233
B One Safety Instructions and Regulatory Information booklet (other
additional regulatory documents may be included)
C One yellow Ethernet cable
D One power adapter (type may dier depending on region)
E Optional items (for example: a wall mount kit) may also be included.
2
3. Connect the CGA4233 to the broadband service
1 Take a coaxial cable.
2 Connect one end of the coaxial cable to the coaxial wall jack or splitter.
3 Connect the other end to the
port on the back of the CGA4233.
4. Power on the CGA4233
1 Plug the connector of the electric power supply adapter into the port. Plug
the adapter into a nearby power outlet.
2 Make sure that the switch is in the 1 position.
0 1
3 After a few minutes, the LED on the front panel must be solid green.
Loading...