Technical Pro LG8xSEA User Manual

]]

User Manual for:

Professional DJ Multi Beam LED

Seashell Stage Effect Light with DMX

MODEL: LG8xSEA

LG8xSEA

LD

WARNING!

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER ON THIS SPEAKER. THERE ARE NO

USER-SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO A QUALIFIED TECHNICIAN

The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of "dangerous" voltage
within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to humans. Users should exhibit extra safety
when this symbol appears in this instruction manual and follow all precautions as they are stated.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance
(servicing) instructions in this manual.

1- Read these instructions thoroughly before using this item.
2- Keep these instructions for future reference.
3- Heed all warnings.
4- Follow all instructions.
5- WARNING: To prevent fire or electric shock, do not expose this equipment to rain or moisture. Do not store or operate this product near any liquids.
6- Clean only with a dry cloth.
7- Do not store or operate this product near any heat sources such as radiators, heat registers, stoves, or other apparatuses (including amplifiers) that produce
heat.
8- Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding plug
has two blades and a round grounding prong. The wide blade or third prong is provided for your safety. If the provided plug does not fit your outlet, consult an
electrician for the replacement of the obsolete outlet.
9- Protect the all wires connected to this unit from being walked on or pinched, particularly plugs and the point where they exit from the unit. When removing
the cord from the power outlet, remove it by holding the plug not by pulling the cord.
10- Unplug the unit during lightning storms or when unused for long periods of time.
11- When wiring this unit and all other equipment used in connection to this unit make sure that all of your equipment is turned OFF.

12- This product is intended for indoor use only! To prevent risk of fire or shock, do not expose fixture to rain or moisture.

13- Make sure the distance between the fixture and the lighted object is not less than 0.5 meters. Make sure there are no combustible or explosive objects 0.5
meters around the fixture. Be sure that no ventilation slots are blocked.

14- Always disconnect from power source before servicing or replacing fuse and be sure to replace with same fuse source.
15- Secure fixture to fastening device using a safety chain.
16- Maximum ambient temperature (Ta) is 104° F (40° C). Do not operate fixture at temperatures higher than this.
17- In the event of a serious operating problem, stop using the unit immediately. Never try to repair the unit by yourself. Repairs carried out by
unskilled people can lead to damage or malfunction. Please contact Technical Pro for the nearest authorized technical assistance center.
18- Never connect the device to a dimmer pack.
19- Make sure the power cord is never crimped or damaged.
20- Never disconnect the power cord by pulling or tugging on the cord.
21- Never carry the fixture directly from the cord. Always use the hanging/mounting bracket.
22- Avoid direct eye exposure to the light source while it is on.

23- Once installation and wiring is complete power on all your equipment with the volume and level controls turned DOWN. Once all the equipment is ON
slowly raise the volume or level controls to their proper positions.
24- When grounding this unit, be sure to do so correctly, so as not to defeat the built-in grounding in this unit.
25- Before placing, installing, rigging, or suspending any product, inspect all hardware, suspension, cabinets, transducers, brackets and associated equipment
for damage. Any missing, corroded, deformed, or non-load rated component could significantly reduce the strength of the installation, placement or array. Any
such condition severely reduces the safety of the installation and should be immediately corrected. Use only hardware which is rated for the loading
conditions of the installation and any possible short-term, unexpected overloading. Never exceed the rating of the hardware or equipment.
26- Consult a licensed, Professional Engineer regarding physical equipment installation. Ensure that all local, state and national regulations regarding the
safety and operation of equipment are understood and adhered to.
27- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or
plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.

Introduction
Congratulations and thank you for your purchase of this Technical Pro LED stage effect light. To get the most from your unit
it is recommended that you review all of the information provided in this instruction manual before operating this equipment.

P7

LG8xSEA

LG8xSEA Rear Panel

1. Menu Button: Press this button to switch between the multiple settings on the LG8xSEA. More details on the
settings can be found below.

2. UP Button: press this button to increase the number on the display screen. Press and hold down this button to
rapidly increase the number.

3. DOWN Button: Press this button to decrease the number on the display screen. Press and hold down this button to
rapidly decrease the number.

4. Enter Button: Press this button to save your settings to memory.

5. Mic: To collect the sound and if under sound-activated mode, the light will change with the sound.

6. Power Input: Connect the power cable to this input to power the unit on.

7. DMX Output(XLR): DMX(Digital Multiplex) is the form of communication between controller and fixtures. When
linking multiple LG8xSEA units simply connect the DMX OUTPUT to the DMX INPUT on the next unit.

8. DMX Input (XLR):DMX(Digital Multiplex) is the form of communication between controller and fixtures. Connect
the DMX output from the controller to this input, When linking multiple LG8xSEA. More details on the settings can be
found below.

P8