Technical Pro IA1000 User Manual

Integrated Amplifier

with USB / SD Inputs

IA1000

IA1000

1000

QUESTIONS/COMMENTS CALL 888-842-6277 or email [e-mail]

Congratulations and thank you for your purchase of this Technical Pro Professional integrated amplifier, the IA1000.To get the most from
your IA1000, it is recommended that you review all of the information provided in this instruction manual before operating this equipment.

If you've spent any time at all in professional audio, you know the name Technical Pro and what it stands for — incredible performance &

sound, and the ultimate in reliability under harsh conditions. And now, Technical Pro offers the same technology in a series of

integrated

amplifier bringing more of what sets Technical Pro apart from all others.

1- Read these instructions thoroughly before using this item.
2- Keep these instructions for future reference.
3- Heed all warnings.
4- Follow all instructions.
5- WARNING: To prevent fire or electric shock, do not expose this equipment to rain or moisture. Do not store or operate this
product near any liquids.
6- Clean only with a dry cloth.
7- Do not store or operate this product near any heat sources such as radiators, heat registers, stoves, or other apparatuses
(including amplifiers) that produce heat.
8- Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than
the other. A grounding plug has two blades and a round grounding prong. The wide blade or third prong is provided for your safety.
If the provided plug does not fit your outlet, consult an electrician for the replacement of the obsolete outlet.
9- Protect the all wires connected to this unit from being walked on or pinched, particularly plugs and the point where they exit from
the unit. When removing the cord from the power outlet, remove it by holding the plug not by pulling the cord.
10- Unplug the unit during lightning storms or when unused for long periods of time.
11- When wiring this unit and all other equipment used in connection to this unit make sure that all of your equipment is turned OFF.
12- Once installation and wiring is complete power on all your equipment with the volume and level controls turned DOWN. Once
all the equipment is ON slowly raise the volume or level controls to their proper positions.
13- When grounding this unit, be sure to do so correctly, so as not to defeat the built-in grounding in this unit.
14- Before placing, installing, rigging, or suspending any product, inspect all hardware, suspension, cabinets, transducers,brackets
and associated equipment for damage. Any missing, corroded, deformed, or non-load rated component could significantly reduce
the strength of the installation, placement or array. Any such condition severely reduces the safety of the installation and should be
immediately corrected. Use only hardware which is rated for the loading conditions of the installation and any possible short-term,
unexpected overloading. Never exceed the rating of the hardware or equipment.
15- Consult a licensed, Professional Engineer regarding physical equipment installation. Ensure that all local, state and national
regulations regarding the safety and operation of equipment are understood and adhered to.
16- Refer all servicing to qualifie nel. Servicing is required when the apparatus has been damaged in any way,
such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate normally, or has been dropped.

WARNING!

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER OF THIS UNIT. THERE
ARE NOUSER-SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO A QUALIFIED TECHNICIAN.

The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence
of "dangerous" voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of
electric shock to humans. Users should exhibit extra safety when this symbol appears in this instruction manual and
follow all precautions as they are stated.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in this manual.

Introduction

IA1000

IA1000

1000

1 2 3

4

5

6

7

8 9

10

12

14

1311

IA1000 Front Panel

1.Power: Press this button to power the unit on and off.

2.USB Input: Insert your USB flash drive into this slot. The unit will automatically read .mp3 files from

the USB flash drive. The maximum storage size of the USB flash drive can not exceed 32GB. Make
sure to set the input select knob to USB/SD to play the signal from the USB flash drive.

3.SD Card Input: Insert your SD card into this slot.The unit will read .mp3 files from the SD Card.The
maximum storage size of the SD card can not exceed 32GB. Make sure to set the input select knob to
USB/SD to play the signal from the SD card.

4.

Play / Pause / Record Button

:

PLAYING AUDIO FROM THE USB / SD CARD INPUT

When the input selector is in the position of SD/USB, press this button to pause the signal from the
USB flash drive or SD card. Press this button again to play. The play/pause function will only work for
the USB flash drive or SD card.

THERE IS NO RECORDING FUNCTION WHEN INPUT SELECTED IS SD/USB.
HOW TO MAKE A RECORDING

When the input selector is in the position of MP3/AUX/ DVD and there is an USB flash drive or SD
card (with blank space on it) inserted into their respective slot, press this button and hold for several
seconds to activate the recording function. After holding the button down for several seconds the unit
will create a new file in the connected USB flash drive or SD card and get ready to record. At the
same time “REC” will appear on the display screen. At this point there is no actual recording yet.
Press this button again and the unit will start recording and the elapsed time of the recording onto the
USB flash drive or SD card will display on the screen. Press this button once again to pause the
recording. When paused, the recording time displayed on the screen will be flashing. Once paused,
press this button once again to continue the recording on the same track. The elapsed time will
continue at the point it was previously paused. Press it and hold for several seconds to save the file
and end the recording and exit. If you wish to make multiple tracks, you must save and exit each
track before beginning a new recording for a new track. If both USB flash drive and SD card are
connected, the unit will begin recording onto the USB flash drive. If the USB flash drive is full, remove
it and then press the record button again to start another recording.

THE RECORDING FILE FORMAT IS .MP3.

5.Repeat/Random Button:

Press this button to repeat the current track, all tracks or play random tracks

IA1000