TEC EMl-31055, TEC SL66 SERIES, SL66 SERIES Operation Manual

Operations Manual
TEC LOAD CELL SCALE
(WITH LABEL PRINTER)
MODEL SL66
SERIES
.
(US-V
r&c TEC CORPORATION
EMl-31055
WARNING
This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual, may cause interference to radio communications. It has been tested and found to comply with the limits for a Class A computing device pursuant to Subpart J of Part 15 of FCC Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of this equipment in a residential area is likely to cause interference in which case the user at his own expense will be required to take whatever measures may be required to correct the interference.
EMl-31055
TABLE OF CONTENTS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
Page
l
INTRODUCTION
.............................................
1
.
PRECAUTIONS
.............................................
1
.%‘EClFlCATlONS
..............................................
2
OVERVIEW
.................................................. 3
REMOTEDISPLAY
............................................. 3
KEYLAYOUT
................................................. 4
KEY AND LAMP FUNCTIONS
.....................................
4
CONTROL LOCK
.............................................. 7
LEVEL ADJUSTMENT
........................................... 8
CLEANING THE PRINT HEAD
..................................... 8
REMOVAL AND REPLACEMENT OF LABEL ROLL ...................... 9
NOTES BEFORE STARTING OPERATIONS
...........................
10
OPERATION PROCEDURE
.......................................
11
1 I- 1. Weighed Article Registration ................................. 11
1 l- 2. By Count Registration
..................................... 13
1 l- 3. Fix Price Registration
...................................... 15
1 l- 4. Preset Count Registration
and Operation
........................
17
1 l- 5. Issuing Net Weight Label ................................... 22
1 l- 6. Tare Function Procedure ................................... 24
1 l- 7. SAVE Key Operation Sample ................................ 27
1 l- 8. VOID Key Operation Sample ................................. 28
1 l- 9. Date Change
............................................ 29
1 l- 10. Selection of Print Item on Registration Label
..................... 30
1 l- 11. Setting Automatic Display Switching Time .......................
31
11-12. Calling and Printing Grade Line ...............................
32 1 l- 13. Calling and Printing Logo
................................... 33
1 l- 14.
FUN Automatic Reception ..................................
34
TOTAL OPERATION PROCEDURES ................................ 36
12- 1. Hourly Report ...........................................
36 12-
2. Grand Total Report
.......................................
37
12- 3. PLUReport ............................................. 38
12- 4. Combination Report
.......................................
42
ACTION FOR ERROR MESSAGES ................................. 4%
LABEL PRINT FORMATS
........................................
46
BEFORE YOU CALL FOR SERVICE ................................. 50
16. APPENDIX
. . . . . . . . . . . . . . . . . . . . ..~.............................. 51
--m,
l-14-10 Uchlkanda, Chlyoda-ku. Tokyo, JAPAN
EMl-31055
INTRODUCTION
We
thank you very much for purchasing the TEC Electronic SL66 Series Scale.
This series has been designed with TEC reliability to offer a cost efficient system for a modest
investment.
The SL66 (with thermal printer)
takes advantage of the latest
technology in microprocessors. Because
of this, the decreased cabinet size permits the system to
be
placed
virtually anywhere in your store.
Your deli
and specialty departments can enjoy these high quality reliable TEC products. Improve your
operating effectiveness and watch the increased utilization of your front end scanning investment. This electronic
Load Cell scale eliminates all moving parts and furnishes an accurate digital display of all
information.
We believe that your needs will now be fully satisfied, and you will have total reliability in price
calculation. Should you have any questions concerning the scale, please refer to this manual. Be sure
to keep this manual for future reference.
PRECAUTIONS
1. DON7 SUBJECT the weighing platter to SUDDEN SHOCKS.
4. NEVER USE THINNER OR OTHER VOLATILE SOLVENT for cleaning.
2. DON’T PRESS THE KEYS TOO HARD.
Keys will operate correctly if they
are merely touched lightly.
5. DON‘T POUR WATER directly on
scale
7. When in use, avoid locations subject to vibration and direct sunlight. 4
3. Clean the cover and platter by wiping with a dry cloth or a
cloth soaked with detergent and wrung out thoroughly.
6. To ensure the scale is operat­ing correctly, place a known
weight on the platter and
check for correct cornouting.
8. After the end of daily work, turn the power OFF, then clean and inspect the exterior of the scale
to allow you to use the scale at
its best condition.
1. SPECJFICATIONS
Items
Maximum Capacity Minimum Scale Division Using Weight Range
Display Range Tare Unit Price presettable Minimum Price Display Power Requirement Current Consumption Temperature Limits Relative Humidity Dimensions (approx.) Weight Remote Display
Weight Unit Price Total Price
Message Display Designations Remote Display Mode
Capacity of PLU Memory
Print Head Label Issuing Method
Label
Interface Device (option):
Cassette Magnetic Tape Loader
PC Keyboard
SL66-3OL-US-V
30 Ibs
0.01 Ibs.
0.20 - 30 lbs. O- 30.05 Ibs
0.0 1
- 30 Ibs.
$0.0 1 - 99.99
$0.0 1
AC 120V ? lo%, 60 Hz
12OV 1.5A 60 Hz 32” - 104°F 35% - 85% RH (No condensation)
15.7” (w) X 17.2” (D) X 18.7” (H)
33.1 Ibs. 4 digits
4 digits
5 digits
22 charactors (16 X 176 dot matrix) NET, PREPACK, ERROR Dual sides
Refer to below table. Thermal Print Head On-demand/Batch RICOH 120LA or equivalent
AIWA DR-1 A FUJITSU PC Keyboard (FKB-2831-001) instead of the IBM PC-XT Keyboard can be used. For use of other units, please contact your TEC representative.
Capacity of PLU Memory
Option Kits
We
Capacity of
PLU
us-v
Max. 1400 PLUS
Name of Kit
OP-66-32K OP-66-TMCC
OP-66-PCKEY
KS-60- 1 OP-66-PL OP-66-PL-TMCC
OP-66-PIGGY MC-l 28-EX MC-256-EX
EMl-31055
Purpose
Expansion RAM Kit Communication I/F Kit (TMCC-3) IBM PC-XT keyboard connec-
tion adapter
Label cassette case Program Loader
Program Loader with Com­munication I/F (TMCC-3) Expansion RAM board Memory Card (128 KB) Memory Card (256 KB)
TMCC =
TEC
Multi-drop
Communication Control
-2-
EMl-31055
2. OVERVIEW
Remote
display
switch
.Power
Speed keyboard
L-- Operation keyboard
3. REMOTE DISPLAY
COMMODITY NAME
1
1
stable
leg
-3-
EMl-31055
4. KEY LAYOUT
FEED
:& TEST ZERO MSG
‘ROG N;fuT VOID
I I
NOTE: The characters (1 - 90) indicated on the speed keys are shown for the convenience of
explanation in this manual. The indications on the actual unit are not as shown in this illustration.
5. KEY AND LAMP FUNCTIONS
Name of Key & Lamp
Mode Switch (I)
AUTO
r
MANUAL
Mode Switch (2)
WEIGH
FIX
Function
“AUTO” position: This position is used to issue regular scale labels. When the weight becomes stable, the label will automatically be issued.
“MANUAL” position:
When the weight becomes stable, the label will be issued by
depressing the a Key. “WEIGHT” position:
This position is used in the weighing function of the SL66. “FIX” position:
The Unit Price is entered directly to the Total Price on calling up
PLU, and that
Total Price cannot be changed by any subsequent weighing.
BY COUNT
“BY COUNT” position: It is possible to produce labels which contain information on quantity pricing, instead of weight.
NUMERIC Keys
These keys are used to enter PLU Number, Unit Price, and Tare weight.
cl
0 -
1 (9j
-4-
Name of Key & Lamp
Function
CLEAR Key
This key is used for clear-entry of numeric keys, return the scale
0
C
condition to the normal weighing mode, release the scale from the SAVE or ERROR mode, and suspend batch printing.
TARE Key
Ll
T
r
PLU Key
El
PLU
PRINT/VERIFY Key
c
PRT/.
l/2 Key
cl
l/2
l/4 Key
0
l/4
SAVE Key
c
SAVE
This key is used to subtract tare weight.
--.-I-. 4--
This key is used to select a PLU number or return to the initial mode.
For issuing Total labels. If the Label issue mode switch is set to the MANUAL position, it has
the function of label issue.
It is also used to resume batch printing if it has been suspended.
These keys are used to calculate the unit price by 1/2lbs or 1/4lbs.
This key is used to save tare and unit price after removing the commodity from the platter.
DATE & TIME Key
DT
szl
M
GRADE LINE Key
GRADE
Cl
LINE
This-key is used for temporary date changes.
This key is used to call the grade line message.
In the “X” or “2” control lock position, this key is used to generate the
Zone Total Report.
VOID Key One article’s data can be cancelled by depressing this key after its
It is also used to return the operation step to the previous step.
NEXT PLU Key
NEXT
c
PLU
This key is used to call out the next PLU #, and forward the operation
step to the next step.
C
0
In the “X”or “Z” control lock position, this key is used to generate the Block Total Report. In the “REG.” control lock position, this key is used to select whether
the data should be printed on the label or not.
PROGRAM Key
c
PAOG.
This key is used to set the various programs.
*
EMl-31055
-5-
This key is used to adjust the ZERO point.
NET Lamp Lights when tare is subtracted.
PREPACK Lamp
<+$
Lights when the SAVE key is depressed.
ERROR Lamp Lights when this machine is improperly operated or there is a function
error.
EM1-31055
-6-
EMl-31055
6. CONTROL LOCK
The control lock has seven marked positions. There are two control keys which will operate these locks.
Manager Key
This key (MA) will access the
PROG/CMT, REG, M. DOWN.
and REWRAP positions.
SE Key This key (SE) will access all seven positions.
Each of the following positions on the control lock serves a different function. PROG. CMT. ~ With the manager key in this position, it is possible to program data in the PLU
file, Store Address, Message, Printing Position, Date, Time, Initial Set, and Bar
Code Format, etc., may also be programmed.
REG.
These positions are the normal control lock positions which allow the issuance
of printed labels.
M.DOWN ~
In the Markdown position, it is possible to designate an item for discount pricing.
REWRAP I___
In the Rewrap position, it is possible to designate an item for rewrapping products.
X (Read) - This posi’tion is used to read all the accumulated sales totals stored in the unit.
These totals include individual item totals, group totals, hourly totals, and the entire file totals.
2 (Reset) - This position is used to reset all item file totals.
-7-
EMl-31055
7. LEVEL ADJUSTMENT
Set the scale on a stable and level surface. Level the scale by turning the adjustable legs so that the air bubble is inside the center circle.
Level Gauge
Correct
Incorrect
When the air bubble moves toward the left side,
When the air bubble moves toward rear, turn the
turn the right adjustable legs clockwise,
front adjustable legs clockwise.
8. CLEANING THE PRINT HEAD
If the print head is dirty, clear printing will not be produced. It is recommended to clean the head with
the thermal head cleaner every day before starting operation using the following procedure:
Then push the head-up lever in the direction
indicated by the arrow.
diagram with the thermal head cleaner.
Then set the label cassette, and push down the
print head. NOTE: Be careful not to damage the print head
when cleaning.
. Thermal Head Cleaner
-8-
EMl-31055
9. REMOVAL AND REPLACEMENT OF LABEL ROLL
(for On-demand printing mode)
1. Remove the printer cover and right side cover. Then push the head-up lever in the direction indicated by the allow.
2. Pull out the label cassette and remove the core’
of the label roll and the label backing paper.
NOTE: To remove the label backing paper,
loosen the paper by turning the paper winding shaft counterclockwise and remove the paper stopper.
roll on the label cassette.
the feed key to confirm that the label is issued correctly.
EMl-31055
0 Label (for Batch printing mode) and Report Paper Threading
Roll stopper
Label or Report paper
10. NOTES BEFORE STARTING OPERATION
(1) Be sure to plug the power plug into an AC outlet. (2) When the power switch is turned on! the scale goes through the test scanning sequence, such as
0000, 0000, 0000, then 11 1 1, 1 11 1, 1 1 1 1 l..... and zeros appear on the displays.
(3) While the scale is in the test sequence, do not put anything on the platter. (4) Do not move the unit while it is in operation. Should it become necessary to move it at any time,
turn the power switch to the OFF position and be sure to readjust the level indicator after relocaitng
the scale. (5) Should a power failure occur during operation, remove the commodity from the platter and insert
the power plug into an AC outlet again when power is restored. (6) If the scale is used with an unrated power source, inaccurate scaling or other errors may occur. (7) If the Zero Point has shifted during scaling, and no tare is displayed, adjust the Zero Point by
depressing the Zero key.
- 10 -
EMl-31055
11 OPERATION PROCEDURE
11-l. Weighed Article Registration Control lock : REG. M.DOWN, or REWRAP
Mode SW(2) : WEIGH
Example A) In the case of an article for which PLU # 100 and a unit price of s3.00/lb are set in speed
key q .
Depress the speed key.
1 ENTER THE PLU #
I
io.oollP
t T-BONE STEAK
1
Place an article on.
I
(Ex. 5.00 lbs)
T-BONE STEAK
1
pzqr-G-lpi5q
AUTO
I 1
AUTO
MANUAL
MANUAL
The label is issued.
T
The label is issued.
4601-h BINKERS CIRCLE AT
(Sample label)
NOTE: Depressing a speed key which is not stored in PLU data beforehand causes the scale to enter
an error mode.
- 11 -
EMl-31055
Example B) In the case of an article for which a unit price of S2.5O/lb is set for PLU # 505.
t ENTER THE PLU #
I
I
inn
bplp
Enter the PLU #.
Depress:
Place an article on<
(Ex. 7.00 Ibs)
/5//
r
T
I
I
PLU
I
1 ENTER THE PLU #
I
pEiq~]Ip
1 LAMB SIRLOIN
I
t LAMB SIRLOIN I
A”‘~ :;,,,
MANUAL
L 1 J MAX: gl,,
The label is issued.
PRT/.
‘i
The label is issued.
(Sample label)
- 12 -
EMl-31055
11-2. By Count Registration
Control lock : REG, M.DOWN, or REWRAP Mode SW(2) : BY COUNT
Example A) In the event that a price of $1.80/l 2 pcs is set for PLU #lOS.
ENTER THE PLU#
1
Enter the PLU#.
cl
PLU
kRUSTY ROLLS I
1 I I-----mm
cl
PAT/*
Press to suspend label issue temporarily.
resume label
Press to cancel label issue.
cl
C
PLU data is returned to
the PLU file.
cl
PLU
(Sample label)
- 13 -
EMl-31055
Example
6) In
the case of
purchasing
20
pcs
of
an article
for
$1
.OO of
price
for 4
PCS. (In
the event
that a price
of $1.00/4
pcs
is set for PLU # 1 13.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SPLIT PRICE
Enter the PLU#
LIFEI
I
cl
PLU
I
Enter the quantity of purchase.
(Max.2 digits)
Elm
I
0
PRT/*
iENTER THE PLU#
1
I-----IIppxq
AUTO
7
The label is issued in succession after peeling it.
I
Single label is issued.
DONUTS
PACKED ON
AUG 21
SELL BY
AUG 26
20 PECLS
$5.00
NflWT m PRICE,lb ;3
TEC BAKERY (TEL)888-I
1-l I
4401-A BAHKERS CIRCLE Al.
(Sample
label)
.
- 14-
EMl-31055
11-3. Fix Price Registration Control lock : REG, M.DOWN, or REWRAP
Mode SW(2) : FIX
Example A) In the event that PLU #3036 and a unit price of $3.80/lb are set in speed key q .
1 ENTER THE PLU # I
Depress the speed key.
piqp-jpE6q
7
q
SMOKED SALMON CHUNKS
~o.oollpziq
,
Place an article on.
SMOKED SALMON CHUNKS
pziii-jn~~
MANUAL
The lab!!+
The label is issued.
SHOKED SALMON CHlltlKS 1
[4401-A BANKERS CIRCLE AT
I
(Sample label)
- 15-
EMl-31055
Example 8) In the event that an open unit price is set for PLU # 205
Enter the PLU #.
Depress:
Enter (he price.
ENTER THE PLU #
hpl-1
PORK LOIN RIB CHOPS
Place an article on. -
(Ex. 1.50 Ibs)
PORK LOIN RIB CHOPS
1
AUTO
MANUAL
The label is issued.
The label is issued.
] PORK LOIN RIB CHOPS (
PACKCOON
AU6 25
SELL BY
AU6 29
1 4401-A BANKERS CIRCLE Al
1
(Sample label)
- 16 -
EMl-31055
1 l-4. Preset Count Registration and Operation
Control lock : REG. M.DOWN, or REWRAP Mode SW(2) : WEIGH, BY COUNT, or FIX
Example A) When Mode SW. (2) is at the ‘WEIGH” position
Depress:
1
Set the number of labels
(Max. 99 labels)
Depress:
1
Enter the
PLU #.
PLU data is saved.
cl
SAVE
Place the shrimps on.
(Ex. 1.50 Ibs)
1 ENTER THE PLU #
I
pzqp-j1[p
1 PRESET COUNT BALANCE 1
PRESET COUNT BALANCE
=a 0
ENTER THE PLU #
I
Io.ool~l~l
: SHRIMPS
[ 0.00 1 1
0.90 1 1 0.00 J
[ SHRIMPS
I
(o.00~~
-g
PREPACK -
SHRIMPS
I
~1.50110.9o)r~
7*
PREPACK
MANUAL:
Ll
:AUTO
SHRIMPS
Batch printing 4
The label is issued with the backing paper attached.
.
0
A
PACKED 0N
AU6 26
printing
~~~~~~1~~~~~~~~~
SELL BY
AUG 28
1.50 0.90
$1.35
NETWT = PRICE;!>: 3
4401-A BANKERS
CIRCLE AT
,
(Sample label)
(continued on next page)
- 17 -
EMl-31055
A
,?,
Remove the shrimps.
Place other shrimps on.
I
[ SHRIMPS
1
*
PREPACK
+
PREPACK
MANUAL: fiF\ :AUTO
Batch printingJJb&-demand printing
-1 r,.,.,..,,.,J
PRESET COUNT
Clear the preset count.
I c I
PRESET COUNT
0
BALANCE
0
Depress:
q
PRT/-
ENTER THE PLU #.
I
rTzn-TlPl
CAUTION: If the setting of the Control Lock or Mode SW. (2) is changed during operation, the specified
number of the label is cleared.
- 18 -
EMl-31055
NOTE: To check the remaining number of the specified label during operation or to cancel the specified
number of the label.
MANUAL:
PRTI-
5
Depress:
:AUTO
I
The label is issued.
I
4
Remove the article.
Depress:
Depress:
Depress:
Place the shrimps on.
I ~~ i
Enter the PLU # again.
:AUTO
1 ENTER THE PLU #
PRESET COUNT BALANCE
50 7,
Cancel the preset count
r PRESET COUNT BALANCE 1
1 ENTER THE PLUS
SHRIMPS
1
rTqro.,,m,.,o
1 SHRIMPS 1 1 .oo 1 1 0.90 ] 1 0.90 1
1 The label is issued. 1
-19-
EM-31055
Example B) When Mode SW. (2) is at the “FIX” position.
Depress:
PRESET
q
COUNT
1
Set the number of labels.
(Max. 99 labels) 00 5
1
Depress:
q
PRT;.
Enter the PLU #.
E/II
5
1
Depress:
1
Depress:
r-l
SAVE
L--L
1
Place an article on.
i ENTER THE PLU #
1 0.00 ]I P ] loooooo~
1 PRESET COUNT BALANCE 1
PRESET COUNT
VALANCE
25 0
[ ENTER THE PLU #
1
1 MILD CHEDDAR I
+
PREPACK
1
1
MANUAL:
PRT/.
111---1
:AUTO
On-demand
Batch printing
printing
(Sample label)
t
Clear the preset count.
i-l
C
Depress:
‘1:
, PRT!.
1 ENTER THE PLU#
1
1 0.00 11 P ~~000000~
- 20 -
EMl-31055
Example C) When Mode SW. (2) is at the “BY COUNT” position.
1 ENTER THE PLU #
I
Depress:
Set the number of labels.
(Max. 99 labels)
Depress:
Enter the PLU #.
Depress:
cl
PRTi .
&ii
5
1
/
PLU
PRESET COUNT BALANCE
0 n
-
PRESET COUNT BALANCE
25
0
ENTER THE PLU #
1 CHEESECAKE
Refer to BY COUNT Registration.
I--/ BY COUNToperation /--I
1
CHEESECAKE
Batch printing
I PINS $0.80
On-demand printing
4
I I
IdO!-A BAHKERS CIRCLE AT
f
When all the specified numbers
of labels are issued.
Clear the preset count
Depress:
PRESET COUNT
BALANCE
PRESET COUNT BA!eANCE
n 0
I -ENTER THE PLU #
- 21 -
EMl-31055
11-5. issuing Net Weight Label (initial set change will be required)
The unit price and tare weight those are programmed in the PLU will be used as Price and Net Weight.
The value of the price and net weight could be changed by numeric keys entry.
Control lock : REG, M.DOWN, or REWRAP Mode SW(2) : FIX
Example) In the event that a unit price of $2.10 and tare weight of 1 lb are set for PLU # 1 16.
Enter the PLU#
Enter the new price.
Enter the new weight.
q mi
I
cl
PLU
q
2
cl
PAT/*
IENTER
THE PLU#
iENTER
PRICE ($1 2.101
1 ENTER
PRICE ($1 2.001
1 ENTER
WT.
1 LB 0 021
[ENTER
WT.
1 LB
30 021
e
PRT/*
AUTO I MANUAL
I
Press to
I
suspend label issue C
cl
temporarily.
I
Press to cancel label c issue.
cl
PLU data 1; ;;teurned pLu
PLU file.
cl
q
PLU data
PLU
is returned
to the
PLU file.
- 22 -
EMl-31055
NOTE 1: With this procedure, the tare weight programmed in the PLU is displayed and printed.
Example) Tare Weight: 1 lb
+ T NET WT. 16 02 (1LB 002)
!
correct wetght
The weight which is entered to change the tare weight is printed out as it is.
Example) Weight: 1.30 Ibs
+ I NET WT. 46 OZ (w
t
correct weight ZLB 1402
PlCl(EO ON
,Ee!G BY
AUG 25
NET WT. 46OZl 1 LB 3002)
TEC BAKERY (TEL)888-1111
4401-A BANKERS CIRCLE Al
(Sample label)
NOTE 2: The NET WT. label can be issued by setting initial set # 2-7 to one of “1” to “4”, # 5-3 to “1”
and # 7-l to “0”.
a-
- 23 -
EMl-31055
11-6. Tare Function Procedure
There are two kinds of tare subtraction procedures, one is
“Direct tare”, the other is “Preset tare”.
Put on the tare.
(Ex.0.20 Ibs)
1) Direct tare subtraction WEIGHT
UNIT TOTAL PRICE PRICE
[]p---lpEEq
PO.20 1 1 1 [ 000000 1 P
Depress:
1
r---
--L-----,
1
f
Weighing operation
(Ex. Depress speed key f,
; 0 i I
4 i
and place an article on.) I
I
3.00 (bs ;
/
I
I
----e---w--.!
MANUAL:
PRT/’
=I
:AUTO
71
1
r
Remove the article
together with the tare.
i
;+
NET
+
NET
[o.oo1 l-7-J pzz-]
The tare weight is cleared automatically.
NOTE: Tare weight subtraction is available up to 30 Ibs. When tare weight subtraction is in operation,
however, the scalable range for net weight becomes less by the amount of the tare.
(Net weight = Gross weight - Tare weight)
- 24 -
EMl-310%
2) Preset tare subtraction WEIGHT
UNIT TOTAL PRICE
PRICE
Enter the tare weight.
(Ex. 0.20 Ibs)
Depress:
T t
i
I
0.20 Ibs 1
Put on the tare. -c,
Fi
f 1
I
Weighing operation
: t
i
(Ex. Depress speed key Lfl,
f
4 f
and place an article on.)
:
5.00 lbs ; I
I I I
I I
, ‘L----,-d
MANUAL:
PRT/'
r-l
:AUTO
I
The label is issued. /
Remove the article.
Remove the tare.
The tare weight is cleared automatically.
The tare weight is cleared automatically.
l--Erlo.oollP
(asp]
‘$ NET
- 25 -
EMl-31055
3) Preset tare subtraction (PLU including tare weight) (only for backroom type)
Enter the PLU #.
1
Depress:
El
PLU
1
~~~ i
r-----------t
Temporarily change the Tare weight.
New Tare weight.
Place the tare on.
t:lA
1
Place an article on.
(Ex. 1.50 Ibs)
MANUAL: 071 :AUTO
I
l 1
The label is issued.
I
Remove the article
together with the tare.
WEIGHT
UNIT TOTAL PRICE PRICE
~o.o011p)1000000
1o-oon
[~pZii-jo.8011~
+
NET
The tare weight is not
cleared automatically.
- 26 -
EMl-31055
11-7. SAVE Key Operation Sample
The
SAVE
key is used to save the tare weight and unit price after taking the article off the platter.
WEIGHT
UNIT TOTAL PRICE
PRICE
pqp)]
Place the tare on.
(Ex. 0.50 Ibs)
Depress:
q
T
Enter the PLU #.
Depress:
The unit price and
tare are fixed.
cl
SAVE
Place an article on.
I
(Ex. 5.00 Ibs)
Remove
the article
with the tare.
together
Clear the save mode.
Clear the tare weihgt.
, 1 0.50 11 P 1 looooool
NET
~o.o01(p]
1 0.00 11 P ) ~000000~
EMl-310%
11-8.
VOID Key
Operation Sample
On depressing the VOID key, the data of the last registration is subtracted from the memory.
1 ENTER THE PLU #
I
Depress the speed key.
1
L-l
I
Place an article on.
(Ex. 5.00 ibs)
T-BONE STEAK
‘mpzq&
1
t T-BONE STEAK
1
Depress:
jThelabelisissued.1
1
15.00113.00
MANUAL: :AUTO
t T-BONE STEAK
1
---- 11 -----II-----l
i T-BONE STEAK
1
- 28 -
EMl-31055
11-9. Date Change The date can be changed temporarily. Control lock : REG, M.DOWN, or REWRAP
Mode SW(2) : WEIGH, BY COUNT, or FIX
Depress:
I
Enter the new date.
(Ex. Sept. 15, 1989)
Month
I-!
8
Year
Depress:
q
PRT/*
NOTE: When the original date is desired.
0
“Xi
1
cl
C
1
0
PRT/.
ENTER THE PLU #
pzq~~~
1 DATE , , , ,0825893
(Current setting date)
1 DATE
1 DATE
65zG-l
1 ENTER THE PLU # I
I
I
I 0.00 I I P
I looooool
1 DATE
0915891
t DATE
0825891
ENTER THE PLU #
- 29 -
EMl-31055
1 l-1 0. Selection of Print Item on Registered Label
This operation specifies whether each print item on the issued in registration labels is to be printed or not.
Control lock: REG. M.DOWN, or REWRAP
Mode SW(2): WEIGH, BY COUNT, or FIX
When using VARIABLE LENGTH LABEL
(option), select Initial Set #4-&O and 2-8:4.
When using PERIOD OF RELISH
(3rd
DATE),
select Initial Set #7-8:l.
.
Depress:
Select the item.
(Refer to NOTE.)
Print
- No print
Depress:
NOTE:
Entry
cl
1
cl
2
q
3
cl
4
cl
5
ENTER THE PLU #
1
PACKED ON DATE
ON ]
item
Packed on date Print/No print
Sell by date Print/No print
Commodity name Print/No prtnt
Weight
PrlnVNo print
Unit price PrintNo print
ON: Print OFF: No print
PACKED ON DATE OFF ]
1 ENTER THE PLU #
Entry Item
Ill
6
Total price
Print/No print
I
1 ,
q l
9
Ingredient message Print/No print
cl
10
Piece count
Print/No print
cl
11 Cooked by
date
Print/No print
- 30 -
EMl-31055
1 l-l 1. Setting Automatic Display Switching Time
When initial set #6-4 is set to “2” (standard), it is available to specify the time before a scrolling
message appears automatically on hte commodity name display after a label has been issued
or after “ENTER THE PLU#” has been displayed. Control lock: REG, M.DOWN, or REWRAP
Mode SW(2): WEIGH, BY COUNT, or FIX
Depress:
ENTER THE PLU #
1
PACKED ON DATE ON ]
Enter the special code “20”.
Set the time.
(1
- 99 sec.)
Depress:
ENTER THE TIME
I
+
0
ENTER THE TIME
40
Current setting time
ENTER THE TIME
15
1 ENTER THE TIME 15
I I
ENTER THE PLU #
NOTE: Automatic display switching occurs provided the control lock is set to “REG.‘, “MARK DDWN”
or “REWRAP”. It does not occur if the unit price has been saved.
-31 -
EMl-31055
11-12. Calling and Printing Grade Line
Control lock : REG,M.DOWN, or REWRAP
Mode SW (2) : WEIGH, BY COUNT, or FIX
1 ENTER THE PLU#
Enter the PLU#.
Enter the grade line#.
cl
PLU
1
cl
GLSAN:E
i
The label is issued.
[CHEESE AND ONION BANS j
IENTER THE G.LINE#
1
BARGAIN SPECIAL
l711p31)
CHEESE & ONI ON BUNS
BARGAIN SPECIAL
PACK& ON -
AUG 21
SELL BY
AUG 28
- TEC BAKERY (TEL)888-1111
4401-A BANKERS CIRCLE AT.
(Sample label)
-
32
-
EMl-31055
1 l-1 3. Calling and Printing Logo
When the initial set # 10-7 is set to “1” (option), the logo containing picture, mark, POP message, etc., can be printed on the ingredient label which having 12 lines or more. Logo data is created on the PC and stored into the memory through the CMT interface.
Control lock : REG,M.DOWN, or REWRAP Mode SW (2) : WEIGH, BY COUNT, or FIX
Enter the logo#. (l-13)
0
LOGO
rl
PRT/*
Start the label issue operation.
NOTE: The called logo is
effective till it is canceled.
il
LOGO
1
cl
C
1
0
PRT/*
IENTER THE
LOGO#
1
1 ENTER THE PLU#
1
1 ENTER THE LOGO#
10
1
1 ENTER THE PLU#
- 33 -
EMl-31055
11.14 FUN Automatic Reception
Control Lock : REG, M.DOWN or REWRAP Mode Switch (2) : WEIGH or BY COUNT
I
ENTERTHEPLUx
I
IN PROCESS
CLEAR
No IENTER THE PLU #
I
1 o.oo]I P 11 oooooo]
YSS IDATA ERROR I
ERROR
I
ENTER THE PLU R
I
ENTERTHEPLU#
- 34 -
EMl-31055
NOTES:
1.
DATA ERROR
04 Framing error
OS Verify error
X
Compared contents do not correswnd.
10 Character over
error
20 BCC error
0
TIME OUT
ERROR
40 Data error SO
Timeout error
Text with
designated time has not
0 0
been received.
*2 0 : Error occurs
x : No error occurs
l 1 P:
PLU + ING u: UNIT PRICE Ml: MISC. 1 (ADDRESS, LOGO) M2: MISC. 2 (SPEED KEY)
Y When several error occur at the same time, all relevant data are added and
displayed in the ‘I-segment display.
3 Cause of Errors
0 RAM for LOGO does not exist when LOGO is selected in initial set. @ Transmitted LOGO data exceeds the number of dots to be colored selected in
the initial set.2.
2. Data is automatically received in registration mode. However, scale operation stops during reception.
3. After clearing an error, the registration initial display is shown. Data other than head data is not received.
4. When the header text is received, all contents previously set are cleared.
- 35 -
EMl-31055
12. TOTAL OPERATION PROCEDURES
When the control lock is set to the “X” or “Z” position, it is available to issue READ or RESET reports.
Both kinds of reports can be issued on labels or report paper.
Control lock: X or Z
“X” position: READ
The totals will not be cleared as they are printed on labels or report paper.
“Z” position: RESET
The totals will be cleared as they are printed on labels or report paper.
12-l. Hourly Report
REPORTS READ
HOURLY REPORT 1
The labels of hourly report are issued consecutively.
1 WRtY’REBRT
(Sample labels)
1
HOURLY REPORT
lifa
Mwt 84
aG25&
STlliEl 31
1743
lm
alM YIMT mL!B!5
M-17
31 15.61 1E.M
I ;r 2.6
17-18
7a 3oA 109.92
s ;! 15.2
V-19
lb0
Ml.22 5&B
St 7tl.2
19-70 92
6.76
r3.60
s X 6.0
M-21
61 1o.n 62.66
I r, 5.9
h22 265.15 721.21
(Sample report)
- 36 -
EMl-31055
12-2. Grand Total Report
1 REPORTS READ (RESET)
I
1 GRAND TOTAL
2
1 SELECT DATA FILE
1
Select the total memory.
Day total:
1 NORMAL 1
Mark Down total:
1 MARK DOWN
21
Rewrap total:
1 REWRAP
31
Total label including total weight, items, and amounts is issued Day total:
GRAND TOT AL
GRAND TOTAL
PACKED ON
AU6 25
NO
SELL BY
Gm
t%HIRI aa
fuxi5!6
s1oR1 I1
l7:h3
a
282.20 567
NETWT ‘CT
PRICE/lb -3
904.92
1
1 4401-A BANKERS CIRCLE AT
(Sample label)
(Sample report)
Mark Down total:
1
r
TOTAL
GRAND
no
40.26
PACKED ON
AU6 25
SELL BY
9 62.38
GRAND
wml REW
m&K86
17:&l
I
4401-A
BANKERS CIRCLE Al
(Sample label)
(Sample report)
Rewrap total:
GRAND TOTAL
-6BIifP Em
GRAND TOTAL
PACKED ON
RO
AU6 25
SELL BY
17.40 48 54.75
4401-A BANKERS CIRCLE AT
rnIK188 UK86
STo4a 31 17:bh
IOl#
T yKJir oaLARs
Il.hll
sh.75
(Sample label)
(Sample report)
- 37 -
EMl-31055
12-3. PLU Report
Select the total memory.
Day total:
Mark Down total:
Rewrap total:
Select the search code.
PLU#
UPC#
1
cl
PRT/.
f
Et-
1
cl--
2
El--
3
+
cl
PRT/-
I
1
TV
2
1 REPORTS READ (RESET)
I
t GRAND TOTAL
31
1 SELECT DATA FILE
I
1 NORMAL
11
1 MARK DOWN
21
1 REWRAP
31
1 ENTER THE SEARCH CODE
I
[ PLU# 1 ]
I UPC#
21
k (Entire PLU Total )
------__ @I
- 38 -
EMl-31055
@ Individual Total
Ex.) Individual PLU Total (PLU # 100)
PLU #
1 PLU TOTAL 1
PlUIt MO
000 100
PACKED ON
AU6
25
SELL BY
(Sample label)
[ PLU#
100 1
.
r-l
PRT/*
IN PROCESS
I
PLU REPORT
PLU I ocwl
tafm. Em
mlIHl 88
N&2586
STolEI 31
17:65
RU I alJiT YIMT rmm I5
alnlM r-ME STE#c
26 73.w 221.70 IM.U
% OF alfw lmttm 36.7
_ - -
(Sample report)
@ Block Total
Ex.) UPC Block Total(UPC#200 - 299)
[lJPC#
(Sample label)
UPC#
2
--
t IN PROCESS 1
PLU REPORT
UPC mm-.
IIw1# Pm
I
WiIHI a WGKBb
sroM 31 1745
UT COLNT YlGHT wILNt5 I I W&S 26 73.W 221.70 67.5 am9
I 23.20 18.56 5.7
oal267 1 25.24 88.M 26.9
rorfl 36 122.3ll 32a.M loll.0
5 OF u!M omm1 5b.h
(Sample report)
NOTE: The
q
key represents 0 through 9. Most significant digit in sfarting number followed by
appropriate number of the
q
keys.
- 39 -
EMl-31055
@ Zone Total
Ex.)PLU Zone Total (PLU#300 l-309 1)
] PLU TOTAL
PACKED ON
PLUt Nb
003001-003091
AU6 25
SELL BY
46.54 15
105.06
4401-i BANKERS CIRCLE AT
(Sample label)
PLU#
1 PLU#
3001 1
1 3001-
I
I 3001-
3091
1
t IN PROCESS
I
PLU REPORT
ml I Wxml-imJ91 lium Etm
mlI#l 88 fuiKa6
STMIEI 31 I746
RU I cur IEmIT Mllrvls 5 x
MHlOl CD0
FILETS
1 5.26
2.lcl 2.0
m3036 9cn1wMJJ(s
6 25.20 95.16 91.1
m309i wffs
a
16.0%
I.20 6.9
TOM 15 66.56
105.06 1m.n
2 OF IRiro mLm1 17.6
(Sample report)
- 40 -
EMl-31055
@I Entire PLU Total
Cl
PRT/.
PLU TOTAL
PLUt NQ
ALL
PACKED ON
AU6 25
ELL BY
200.73 362
601.68
4401-A BANKERS CIRCLE AT
(Sample label)
PLU REPORT
flu I KL
tim
n#lHIKI 88 KG2586
sloaEl 31 1943
Ru I tall1 !4IcHT OuLfus s ‘/,
OLIN35 MEYNE
a 0.M 42.u 1.0
LUI39 BUTTER CUIE
n
DXE52 LD dii
3.50 0.6
WLES
RDJX of USA
woo77 At2
19.50 3.2
oalM ,toN Sri!
36.N 6.0
26 73.W 22l.M 366.8
WQlM BEEF LIVER
1 23.20 18.56 3.1
WIIM 51[1101w STEtx om205 fA LOl~i~ aloP
88.M 11.7
2szo
Ml726 &XII Uli
65.36 7.5
67 0.M 18.60 3.1
ooo761 TWEY omf ICKS
3 6.69 3.00 0.5
muyll CM FILETS
3 S.26 2.10 0.3
CUD36 3CUEDXnDwcHH(s
b K.im
95.76 15.9
M#wI YRlid’S
1 16.U 1.20 1.2
TOIK 362
MO.73 601.68 100.0
4 of omrl LmtLFRy 100.0
(Sample report)
-41-
EM1-31055
12-4. Combination Report The total reports or setting reports are printed in the order of the specified tables (max. 8 tables).
Depress:
Select the table:
Table # 1
Table #2
Table #3
Table #7
Table #8
Depress:
n
PROG.
-1
cl-
-+8 El-
t REPORTS READ
1
COMBINATION REPORTS
I
TABLE NUMBER
1
NOTE 1: If an error occurs while the combination reports are being printed, the data which is not printed
out is printed as the “Canceled report” after the combination reports are printed.
NOTE2: With the control lock set to the “Z” position, only the total reports are printed out.
- 42 -
EMl-31055
HOURLY REPORT
HWR
QNiT YlMT OflLM
16-17
31
15.61 18.60 S % 2.6
17.18
78 3U.64 109.92
s % 15.2
IS-19
160 201.22 5u.13
s:: m.2
19-M
92 6.76 I3.60
S % 6.0
20-21 61 10.92 62.64
s 4 5.9
lOTAL
622 265.15 721.21
GRAND TOTAL
HDRWY REW
mcnlLll 88
WC2586
STMEQ 31
1741
WT !mlT WlLM
lOTR
365 M7.49 6uh.w
GRAND TOTAL
Mwo(yH Em
llRCHitrr 88
WG2586
STcm 31
1747
MUlT YIWT WItfiTs
TOlRl
9 ho.26 62.38
GRAND TOTAL
WlCHlEf 88
ml2586
miff I1
1747
CfJw rElM1 WltFlls
rm
68
17.&l 54.75
PLU REPORT
Ful I fit
HrQm REW
nAcHlHEl B8
WGK&
SmREl 31
1747
PlJ f wwr YIMT wluws s 7,
am15 IWJ cmxi
6.76 2.60 U.6
cm5
hEnw
53
0.m
12.80 7.0
VER COXIE
-
-43-
-
4
/
Pkrm ff u.s.fl.
am77 Km rmln NllW
tl!lo205
wO721
TOM
19.50 3.2
&# sr”
36.M 6.0
26 73.90 221.M 36.1
BEEF LIVER
6 23.20 18.56 3.1
SIRLOIN STEM
KM
?tk 1OlW ilB tN’5
88.20 lb.6
CAtEM KM Ulk 65.36 7.5
67 0.M ISA 3.0
Tim wlKr1us Li FILETS’ 6 69
3.m 0.5
s&E0 s42li CWKS 2.10 0.3 Afs 25.20 95.76 15.9
8 16.08 7.M 1.2
3h5 M7.19 6Oh.w loll.0
% ff Gwa om.B) lM.O
PLU REPORT
RU I ALL
mw iifrn
mIlEI !a
tiK86
STaifI 31 17:17
Ptu I CaNI IEIGHT mtmts s %
om505 LM SliaOlH
3 17.60 63.50 79.5
NHI721
tdicfEN
ulffi
15 R.M 11.25 70.5
TOM 48 17.hn 56.75 al.0
k cf w mtfm 1rn.u
PLU REPORT
WC RL
tmrw iifm
twYlKl88
Ml2586
SVJM 31 1747
UPC cow YIWT WIM s %
IN267 2 5.h6 16.38 26.3 ml315 I
2.50 I.0
002t35 6 3% 13.50 69.7
TOM 9 60.26 62.38 1M.O
5ff awa m.Ltwsl 1040
(Sample report)
EMl-31055
13. ACTION FOR ERROR MESSAGES
Take the following action if an error message appears on the commodity name display with the buzzer
sounding.
0 Label Issue Mode
Control lock: REG./MARK DOWN/REWRAP
epress the ic1 key, and check
the PLU data.
Depress the ICI key, and turn the
key, and check
head are set correctly.
2. If the label home position is misaligned, press the iFEED1
et the cassette switch
ette switch to “LABEL POSITION”.
-44-
EMl-31055
l
Read and Reset Mode
Control lock: X (read)/Z (reset)
Message
PLU NOT FOUND
NO REGISTED REPORTS
PRT FAILURE DETECTED
CASSElTE ERROR
Cause Solution
Corresponding PLU # or UPC is
Depress the a key, and enter the
not registered.
correct PLU #.
-I_ There is no combination report Depress them key, and check the setting data.
combination report tables.
-~ -
Printer trouble Same as in the label issue mode.
Label cassette is not set correct-
Set the cassette correctly.
IY.
LABEL SENSE ERROR
The label interrupts the sensors.
Depress the q key, then the
I-1 key, and remove the label.
- 45 -
EMl-31055
14. LABEL PRINT FORMATS
1)
Weighing Label
Commodity Name
__ Packed on date
Unit price
Weight
Store Address
2) By Count Label
I
RED DEL I Cl OUS APPLES
PRODUCE OF U.S.A.
I
Commodity Name
PAW33 ON
AU6 25
SELL BY
SEP I
Number of articles
- 5 PiWS $1.50
FlETWT 3
PQICE,'!,:'
4401-A BANKERS CIRCLE AT
Total
Price
3) Fix Price Label
Weight ~
Total Price
- 46 -
EMl-31055
4) Ingredient
and Period of Relish Label
5) Net Weight Label
BUTTER COOKIE -
COOKED BY DEC 1 +
IllSEDIElWJWt6 A FtPtn DF BEST DMLITY t
ik~i NW 21 SELLBY NOV 28
1 PlfCES
aaol-IA BANKERS CIRCLE AT 4
CHOCOLATE
HERIMWE PIE --
AU6 27
Plosn a
Au6,30
f3Yl
4
NElWT.5802( 3lBlOOZ
4401-A BANKERS CIRCLE AT
_q_ Price
- Store Address
I_ Commodity Name
I-
Ingredient Message
J
Price
~ Net Weight
-Commodity Name _I_ Period of Relish
‘1
1
Ingredient Message
- 47 -
EMl-31055
6) Bar Code Change Label
CHEESECAKE,
Commodity Name
,
Ingredient Message
Price
Net Weight
d401-A BANKERS CIRCLE
Store Address
- 48 -
EMl-31055
7) Read & Reset Mode
0 Hourly report
“READ” mark (+ : RESET)
Total Weight
Total Items Total
Amounts
0 Grand total report
AU6 25
Total Memory mark
- no
SFAL BY
(
N: Day Total M: Mark Down Total
R: Rewrap Total
I=
1
202.20 567 904.92
NETWT di3
4401-A BANKERS CIRCLE AT
I
0 PLU total repot-t
Individual PLU Total
PlU TOTAL
Search code
PLU #lOO
PACKED ON
AU6 25
SELL BY
Zone Total Entire PLU Total
Zone #
3001 - 3091
/ HOURLY REPORT 1
PACKED ON
TOTAL 0
AU6 25
SELL BY
Block Total
Search code --I
Block #200 - 299
i 122.30 34 328.46
4401-A BANKERS CIRCLE AT
PLU TOTAL
PACKED ON
AU6 25
PLUIt NO
ALL
SELL BY
200.73 362
601.68
NETWT fE3 DRICE/lb ;3 m
4A01-A BANKERS CIRCLE AT
- 49 -
EMl-31055
15. BEFORE YOU CALL FOR SERVICE
It is our primary concern to give you full satisfaction and better service. If, however, any problem arises in connection with the operation of this scale, please check the following points before calling for service.
A) Is the power plug fully plugged into an AC outlet?
6) Is the power switch turned ON ?
C) Is AC power being properly supplied to the outlet? (Check it using another electric appliance.)
D) Check the circuit breaker. E) Has there been a power failure of any sort ?
F) Has the operation been carried out in the correct order ?
This scale has been manufactured under strict quality control. If you have any trouble, however, DO NOT ATTEMPT TO FIX IT BY YOURSELF. Pull the power plug out of the AC outlet, and contact your TEC representative.
NOTE: The specifications are subject to change without notice.
- 50 -
16. APPENDIX
SL66 Series Bilingual Specification
US type: Owner’s Manual at page 32
NOTE: The print position of the grade line is selectable by setting the Initial #3-6.
EM1 -31055
No. of lines for commodity name #3-6 Print position of the grade line
1 line (No print in the 2nd, 3rd-.
,
l
A grade fine is printed in the 1st line. (Left-justification)
and 4th line.)
l
A commodity name is printed from the 2nd line.
2 lines (No print in the 3rd and
4th line.)
l
A commodity name is printed from the 1st to the 3rd line.
3 lines (No print in the 4th line.) o
l
A grade line is printed in the 4th line.
(Right-justification)
4 lines
l
A grade line is printed in the 1st line.
(Left-justification)
l
A commodity name is printed from the 2nd line to the 5th
1
line; provided that the total number of lines of the grade line +commodity name + Ing. line does not exceed the
max. line of the label when using the Ing. label.
l
A commodity name is printed from the 1st line to the 4th line.
0
l
A grade line is printed in the 4th line, provided that the total number of characters of commodity name + grade line does not exceed 26 characters. (Right-justification)
- 51 -
PRINTED IN JAPAN
E
Loading...