How it Works
TEC
Loading...
EM1-31015
Owner's Manual
79 pgs4.91 Mb0

TEC EM1-31015, TEC EMl-31015D, TEC SL-5900, SL-5900 Series Owner's Manual

Download
TEC
TECTEC
TEC
TEC Electronic Computing Scale
SL-5900 (US. Version)
Document No. EM1-31015
TOKYO ELECTRIC CO., LTD.
EMl-31015D
Page
14. TOTAL OPERATION PROCEDURES ..................................... 34
14.1 HourlyTotalRepot-t .............................................
34
14.2 Grand Total Report .............................................. 35
14.3 PLUTotalReport
............................................... 36
14.4 Clerk Total Report
.............................................. 40
15. LISTUPOFPLUDATA .............................................. 42
16. PROGRAMMING PROCEDURES .......................................
45
l
Selection of Programming Menu ......................................
45
Menu No. 0 : Changing Unit Price or Price ............................... 46
Menu No. 1 : Setting or Changing PLU Data .............................. 47
Menu No. 2 : Setting Store Address or Commercial Message
.................. 52
Menu No. 3 : Adjusting Print Position for Label ............................ 53
Menu No. 4 : Setting Date, Time, Machine Number, and Store Number
........... 54
Menu No.
5 : CMT Operations ........................................ 55
Menu No.
7 : Changing Bar Code Format ................................ 57
Menu No.
8 : Assigning Speed Keys .................................... 60
Menu No. 11 : Setting Ingredient (for SL-5900-36 only)
....................... 61
Menu No. 12 : Issuing Confirmation Label (for SL-5900-35/36 only) ............... 63
Menu No. 13 : Switching On-Line/Local (for SL-5900-35136 only)
................ 64
Menu No. 17 : Setting Grade Line (for SL-5900-36 only) ......................
65
Menu No. 18 : Memory Card (for SL-5900-36 only) ..........................
66
Menu No. 20 : Transmitting PLU File or Unit Price (FUN System) ................
69
Menu No. 21 : Setting Clerk Name (for SL-5900-36 only) ......................
70
Menu No. 40 : Setting Print Item #l ON/OFF ...............................
72
Menu No. 41 : Setting Print Item #2 ON/OFF ...............................
73
17. ERROR MESSAGE TABLE ........................................... 74
18. BEFORE YOU CALL FOR SERVICE .....................................
75
CAUTION:
1. This manual may not be copied in whole or in part without prior written permission.
2. The contents of this manual may be changed without prior notice.
3. Please refer to your local Authorized Service representative with regard to any queries you may have in this manual.
Copyright 0 1996 by TEC CORPORATION All Rights Reserved l-14-10 Uchikanda. Chlvoda-ku. Tokvo. JAPAN
EMI-31015D
. INTRODUCTION
We thank you very much for purchasing the TEC Electronic Computing Scale SL-5900 Series. This scale has been designed with TEC reliability and offers a cost efficient system for a modest investment.
The SL-5900 (with thermal printer) takes advantage of the latest technology in microprocessors and
because of this, the decreased cabinet size permits the system to be placed virtually anywhere in your store. Your deli, and specialty departments can enjoy these high quality reliable TEC products. Improve your operating effectiveness and watch the enhanced utilization of your front end scanning
investment. This electronic Load Cell scale eliminates all moving parts and furnishes an accurate digital display of all information. We believe that your needs will now be fully satisfied, and you will have total reliability in price calculation. Should you have any questions concerning the scale, please refer to this manual. Be sure to keep this manual for future reference.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part
15
of the FCC Rules.
These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment.
This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operations of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
(for USA only)
I
Changes or modifications not expressly approved by manufacturer for compliance could void the user’s
authority to operate the equipment.
I
“This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment
Regulations.”
“Cet appareil numerique de la classe A respecte toutes les exigences du Reglement sur le materiel
brouilleur du Canada.”
(for CANADA only)
Safety Summary
Personal safety in handling or maintaining the equipment is extremely important. Warnings and Cautions necessary for safe handling are included in this manual. All warnings and cautions contained in this manual should be read and understood before handling or maintaining the equipment. Do not attempt to effect repairs to this equipment.
If a fault occurs that cannot be rectified using the procedures described in this manual, turn off the power, unplug the machine, then contact your authorised TEC representative for assistance.
-l-
EMl-31015D
an abnormal condition such as when the machines are producing smoke c strange smells may cause fire or
cause fire or electrical shock. electric shock. In these cases,
immediately turn off the power switches and disconnect the power cord plugs from the outlet. Then,
contact your sales agent (or mainte-
n
If foreign objects (metal fragments,
turn off the power switches and
agent). Continued use of the machine in that condition may cause fire or
electric shock.
n
If the machines are dropped or thei cabinets damaged, first turn off the power switches and disconnect the power cord plugs from the outlet, ant
,, the contact your sales agent (or
maintenance and service agent). Continued use of the machine in that
condition may cause flre or electric
m Ensure that the equipment is
properly grounded. Extension cables should also be grounded. Fire or electric shock can occur on improp­erly grounded equipment.
age to objects if the
W Do not install the machines where
they might be exposed to direct
sunlight, high humidity, or dust.
Otherwfse fire or electric shock
[Precautions Durlng installation]
n
Do not place the machines on
unstable or slanted surfaces, as they may drop or fall and cause injury.
n
Do not place heavy the machines, as thes become unbalanced a
-3-
EMl-31015D
1. SPECIFICATIONS
Item
Maximum Capacity Minimum Scale Division Display Range
Tare
Unit Price Presettable Minimum Price Display Remote Diasplay :
Weight
Unit Price
Total Price Message Display (option) Display Designations Remote Display Mode Capacity of PLU Memory Print Head Label Issue Method
Available Printing Width
Label Report Paper Power Requirement
Current Consumption Temperature Limits
Relative Humidity Dimensions (approx.)
Weight (approx.)
Memory Card Interface :
CMT Loader l/F
FUN System I/F
PC Keyboard I/F
TMCC I/F
Memory Card I/F
n
Option Kit and Device
30 Ibs.
0.01 lb. O-30.05 Ibs. Up to 30 lbs. $0.01-99.99 $0.01
4 digits 4 digits 5 digits
16 characters (5x7 dot matrix) NET, PREPACK, INLINE, ERROR, ACCM, ITEMS Dual sides 400 PLUS
(standard),
1240 PLUS max. (option)
Thermal Print Head
On-demand
1.65” RICOH 120LA or equivalent
RICOH 115F (black) or equivalent
AC 120V + lo%, 60Hz
120VlA, 60Hz O”C- +4O”C (32”F-104°F)
35% w 85% RH (No condensation)
15.7” (W) x 16.2”(D) x 18.7”(H)
29 Ibs.
MC-1 28KB
Standard Standard Standard Standard
Standard Standard Standard Standard Standard
Cassette Magnetice Tape Loader : AIWA DR-1 PC Keyboard (for programming) : IBM PC-XT Keyboard, FUJITSU FKB-2831-001, FUJITSU FKB-
2831-101 For use of other
keyboards,
please conteact your TEC
representative. Programming Keyboard : TEC RK-3 Programming Keyboard Adapter : TEC OP-57-RK-3 Message Display Kit : OP-LCDFIU-US (Except SL-5900-35-C4-US) TMCC Cable Kit :
OP-5900-TMCC
Ehll-31015D
W FUN System
The SL-5900 is based on the FUN (File Update Network) system, which is a simplified networking
system unique to TEC.
This system can accommodate up to 16 terminals as a multi-drop, and
allows any terminal in the system to transfer its PLU fife or UNIT PRICE data to other terminals for verification.
n
System Configuration
...-I-....’ Max. 16 units/system ‘..
471 CMT Loader
L I
PLU
File
PLU
File
Control Procedure : FUN (File Update Network) ... Multi-drop Transmission Speed : 4800 BPS Number of unit/system :
Max. 16 units
-6-
EMl-31015D
2. OVERVIEW
,-PC keyboard
connector
Platter
I L
-
Message display ~~~
( Oplion: SL-5900-30/35-C2-US \ Standard : SL-5900-35/36-C4-US / I!
Mode switch (1)
Level gaugi
Control IO&~
L-Operation
keyboard
3. REMOTE DISPLAY
CAPACITY 30 x 0.01 Ibs
NET
PREPA=
lb
INLINE
ERROR
TEC
Ehll-31015D
4. KEY LAYOUT
W Operation
Keyboard
.:.:,:::.:.
.I .\ .
::: :: . .
~
. . . :
. . .
. . . . .
32
I
..: :. .: :
;.:.:..:i.
s I
. . .
..:.:. . . . . :...; 41 42 43 44 45
46 47
48
49 50
,.,.,.
..:,::.,: :
i. .: >: :
.;;,.;,::
“““’ ,:,::.::; 51 52 53 54 55 56
57 56 59 60
,,y:: j::
1 ~ I 1 1 I
,....,
. .
. .
.“.‘.‘.>
. . . :.
‘.‘.~~.:ii:.:.:.:.:.:.;:.:.: .,.,.,.,.i,.,.,., f i ; : : : : -:f :‘.‘:‘:‘.‘:‘:‘:-:.: : :: : .‘;;:‘;: :: :
. . . . . . . . ..~...~.~.................::::::::::
::~ .iL:,;,. ~,,:,.,~,:,~,.,‘,‘,‘~‘,‘,‘:‘:‘~~,~~~~~.
:.:z l... L..
: ::::::::::::,:i::::::::::::,:
:.:,:
. . . .
.,.,.,.,
. . . ..~..~............._.......l..._. ..i. . . . ..n........
. . . . . . . ._.,.i_.,.i,./,...,.j.,.......
,,,_,,., ,:: : :: ::: ::: ::: :::.
.:
..
i:i-- ..:.: .:.:... i... :.:.,“:.:.:::::::i::::j~:::~::~~:~~~
. . . . . . . . :.:j::;:::::::::j: ,_ j::j.:.::::::::::::~:::::::::::::’:’:
:.:~,~~iS.~.:~;:-l:~~:~~::~~~.:.:~.~~~:~:~:~~:~~~.~:~::~:~~~~~~.~.:~:~~:~~~~~:~:: FE ED
TEST ZERO
: :: ..:.
i...... ..,. :.:.:.: ._.,_,.,L.i__,. .,.,.,l,.,.,.,.C,.,. .,.,.,.,i.,._.,.,.,.,,,...,.,...,.,...,.,...,.,...,.,...,.,.,.,.,.,.,...,.,.,,,.,.,.,...,.,.,.,
L”‘< . . . . . __i,.,_.,__,.,i_______...,.,.,.,.....,.,.,.,.,.,.,.,.,.,.,.,
.,..:,.,::
. . ..v. n .i .,. .,.,.,.,.,...,.,.,.,...,.,.,.,.,.,....., ,.,.,...,.,
:.:.:.:.:.:.:+:.: . . . . . . . . : :. . . . ..,.
““‘.‘.‘.‘..‘.:.“-:.:j:.:‘:‘:~!~~~,.~:~~:~~~:~:~~~.~~ . . . . . . . . . . . . . . . ../.._i :.:.:.:.:::::::::::::.::
. . . . . . ..(. . . . . . . . . . . .
FL; VOID x
0 FOR "xM ,;,
7 8 9
4 5 6
SAVE
1 2 3 l/2
0 Tcr,, C 114
PLU
‘2
NOTE : The characters (l-60) indicated on the speed keys are shown for the convenience of
explanation in this manual. The indications on the actual unit are not as shown in this illustration.
W Programming Keyboard
COMMODITY NAME
r
NEXT
PLU
ALIT0 CODE SEND
J
EMl-31015D
H PC Keyboard (for programming)
n
RK-3 (with OP-57-RK-KS) Keyboard (for programming)
.-
: ^
EMl-31015D
5. KEY FUNCTIONS
n
For Operation Keyboard
Lode Switch (1) “AUTO” position:
This position is used to issue regular scale labels. When the weight becomes stable, the label will automatically be issued. “MANUAL” position:
ight becomes stable, the label will be issued by depressing
vlode Switch (2)
WEIGH
“WEIGH” position:
This position is used in the weighing function of the SL-5900.
BY COUNT
The unit price is entered directly to the total price on calling up PLU, and that total price cannot be changed by any subsequent weighing.
“BY COUNT” position: It is available to produce labels which contain information on quantity
pricing, instead of weight.
temporary date changes.
This key is used to feed labels or report paper.
In the “X” or “2” control lock position, this key is used to generate the
step to the next step.
-10 -
EMl-31015D
of label issue.
commodity from the platter.
commodities.
This key is used to subtract tare weight.
This key is used to adjust the “ZERO” point.
LABEL& REPORT PAPER
q
key
L/R
CLERK keys
This key is used to select label printout or report paper printout.
These keys are used for entry operation by clerk and add entry operation by clerk.
- 11 -
Et&-31015D
n
For Programming Keyboards
8
6
Key
Function
9 y ?
ti
g s
q
This key allows the clearing of numeric entries prior to the depression
CLEAR
of another function key. It is also used to release the scale from the
0 0 0
error mode. This key is used to select the upper or lower character indicated on
o x
the keytop when setting the commodity name or store address.
o
while this key is pressed down, press a character key to set the small
q
0
letter of alphabet, or upper-case character indicated on the upper area of the keytop. When this key is released, the shifted status is
x 0 x cancelled. This key is used to recall the next PLU # (+ 1) of the PLU # currently
o o x
recalled.
This key is used to change the PLU # currently recalled.
This key is used to print out the data set in the currently recalled
0 0 0
q
This key is used to access each programming menu.
PROG 0 0 0
v
cl
0
This key is used toselect selectable items.
0 0 0
q
ENTER
During programming, data is input to the SL-5900 system using this key.
0 0 0
This key is used to set the free zone of the auto code for UPC #, back the digit when setting the bar code format, and return the setting line to the first line while setting the second line and during the setting
0 0 0
of the commodily name or store
address.
- 12 *
EMl-31015D
Function
This key is used to move the setting line when setting the commodity
key is pressed down, press a character key to set the small letter of
alphabet. When this key is released, the shifted status is cancelled.
NOTE : When the power is turned off or control lock is switched, the PC keyboard or RK-3 keyboard
will be initialized to select capital letters.
6. LAMP FUNCTIONS
Lamp Function
NET
\ ‘/
,yi
Lights when tare is subtracted.
PREPACK
\ ‘/
Iyi
Lights when the SAVE key is pressed.
\ ‘/
INLINE
yi
Lights when the PLU or unit price file is updated. Lights when the scale (for SL-5900-3536) is in the IN-LINE mode.
ERROR
ACCM
\‘/
Iri
Lights when the scale is improperly operated or there is a function error.
\ ‘/
/yi
This lamp lights when items are being added to the specific CLERK memory in the add entry by clerk mode (for SL-5900-36).
ITEMS
\ ‘f ;yi
This lamp lights when items are being added to any CLERK memory in the sub-total operation in the add entry by clerk mode (for SL-5900-36).
- 13-
EMl-310150
7. CONTROL LOCK
The control lock has seven marked positions. There are two control keys which will operate these locks.
l
Manager Key
TSE ----I
This key (MA) will access the
PROGCMT, REG, OFF, M. DOWN, and REWRAP
positions.
l
SE Key
This key (SE) will access all
seven positions.
Each of the following positions on the control lock serves a different function.
Position
PROG. CMT.
REG.
OFF M. DOWN REWRAP
X (Read)
Z (Reset)
Function
This position is used to set the data of the PLU, store address, printing position, date, time, bar code format, etc. It is also used to transfer the
PLU file using a CMT loader.
This position is the normal control lock position which allow the issuance of printed labels.
This position is used to lock the scale power. This position is used to designate an item for discount pricing. This position is used to designate an item for rewrapping products.
This position is used to read all the accumulated sales totals stored in the total memory.
This position is used to reset all item file totals.
- 14 -
EMl-31015D
8. LEVEL ADJUSTMENT
Set the scale on a stable and level surface. Level the scale by turning the adjustable legs so that the air bubble is inside the center circle.
@eve1 Gauge@
Correct Incorrect
When the air bubble moves toward the left side,
When the air bubble moves toward rear, turn the
turn the right adjustable legs clockwise.
front adjustable legs clockwise.
9. CLEANING THE PRINT HEAD
If the print head is dirty, clear printing will not be produced. It is recommended to clean the head with thermal head cleaner everyday before starting operation using the following procedure:
1. Remove the printer cover and label cassette. Then push the head-up lever in the direction indicated by the allow.
the figure to the right with the thermal head cleaner. Then set the label cassette, and push down the print head.
NOTE: Be careful not to damage the print head
when cleaning.
hermal Head
Cleaner
- 15 -
EMl-31015D
IO. REMOVAL AND REPLACEMENT OF LABEL ROLL
I. Remove the printer cover and right side cover.
Then push the head-up lever in the direction indicated by the allow.
!. Pull out the label cassette. Then remove the
Label
cassette
core of the label roll and the label backing paper.
I
NOTE: To remove the label backing paper,
loosen the paper by turning the paper winding shaft counterclockwise and remove the paper stopper.
.~ ~~~~
3. Referring to the figure on the right, set the
label
Roll stopper
roll on the label cassette.
Backing paper stopper
5. Push down the print
head, and close the covers.
NOTE: When the label roll is replaced, press the
feed
key to
confirm that the label is issued
correctly.
- 16 -
EMl-31015D
.
REPORT PAPER THREADING
Roll stopper
I
Report paper
12. BEFORE STARTING OPERATION
(1)
(2)
(3) (4)
(5)
(6) (7)
Be sure to plug the power plug into an AC outlet.
When the control lock is turned from OFF to REG position, the scale goes through the test scanning sequence, such as 0000, 0000, 00000, then
1111, 1111, 11111
... ... and zeros
appear on the weight and total price displays.
When the control lock is turned from OFF to PEG over 16 seconds after the power plug is plugged into an AC outlet, all “8”s appear on all displays for a moment, then zeros appear on the displays and the scale is ready for use.
While the scale is in the test sequence, do not put anything on the platter.
Do not move the scale while it is in operation.
Should it become necessary to move it at any
time, turn the power OFF and be sure to readjust the level indicator after relocating the scale. Should a power failure occur during operation, remove the commodity from the platter and plug
the power plug into an AC outlet again when power is restored.
If the scale is used with an unrated power source, inaccurate scaling or other errors may occur.
If the Zero Point has shifted during scaling, and no tare is displayed, adjust the Zero Point by depressing the ZERO key.
- 17-
EMl-31015D
13. OPERATING PROCEDURES
13.1 WEIGHED COMMODITY REGISTRATION
Control lock : REG, M.DOWN, or REWRAP Mode SW (2) : WEIGH
[Example A] In the event that an unit price of $3.00 is set for PLU#lOO.
zmy-
:.::.:.:,:.:.:..
. . ._....._i . . :
.A.. . ..i .
;;@jti: YJgj”’ :.:., :.,.::.:.,
:::~:;.i’L:i::: : : :.y.: !...A. ., ;
1 2 3
4
5
Enter the PLU# . Depress the PLU key.
Place a commodity on the platter. (ex. 2 Ibs.)
Mode SW (1) : AUTO
The label is issued automatically.
Mode SW
(1)
: MANUAL The label is issued after depressing the PRINT key.
Remove the commodity from the
platter.
PLU data is returned to the PLU file.
2 00 3.00 $6.00
METW: G!F! PRICE/IS@ w ~ * - 5’
19250 VAN NESS AVE.
~
TEL 213(320)8900
I
0.00 P
J-----l
000000
__-_--
- -
NOTE : Recalling a PLU# that has not been set in the PLU file will result in an error.
In this case,
depress the CLEAR key, then enter a correct PLU#.
- t8-
EMI-31015D
[Example B] In the event that PLU#lOO and an unit price of $3.00 are set in the speed key #I.
::.-:-::y::::
. .
:;g&
: :&h’,,-. “.>:<.‘.:‘, ‘.
::,:j::;:;::::­., ,\ .,
./.i_.. . .
1
2
3
4
Depress the speed key #l .
Place a commodity on the platter.
(ex. 2 lbs.)
SW (1) : AUTO
The label is issued automatically.
Mode SW (1) : MANUAL
The label is issued after depressing the PRINT key.
Remove the commodity from the platter. PLU data is returned to the speed key and PLU file.
T-BONE STEAK
PACKED ON
!Ll
C
DE: 6'
2.00 3.00 $6.00
NET\h’T. iG8
Anabel &f&q
19250 VAN NESS AVE.
TEL 213(320)8900
NOTE : Depressing a speed key to which no PLU data has been assigned will result in an error. In
this case, depress the CLEAR key, then depress a speed key to which PLU data has been assigned.
[Example C] In the event that an open unit price is set for PLU#103.
Enter the PLU# .
1 1 10 13 1 1 000103 1
0.00 1 P 1
Depress the PLU key.
0.00 0.00
0.00
Enter the unit price. (ex.
$1.25) 0.00 1.25 0.00
Place a commodity on the platter. (ex. 2 Ibs.)
Mode SW
(1)
: AUTO
The label is issued automatically.
Mode SW (1) : MANUAL
The label is issued after depressing
the PRINT key.
2.50.1 2.00 1 1.25 /
GROUND BEEF
PACKED ON
!I! iF c
OEC 5
2.00 1.25
$2.50
NFrwr. =
PRICE/lbB Cm
19250 VAN NESS AVE.
TEL 213(320)8900
EMI-31015D
[Example D]
In the event that an unit price is $1.50
_ _ _ _ _ . Random Item PLU
(optional function by initial setting)
-
:.: .,.,,: .,., . . . .
:g:;:j::;.::i :. : yJ&F,,
.., . . ., ,., .‘:INo,-
i: :.:.:,:.: :
.,.. ,.......:,
1 2 3
4
NOTES
Depress the PLU key. Enter the unit price. (ex. $1.50) Place a commodity on the platter.
(ex. 3 Ibs.) Mode SW
(1)
: AUTO
The label is issued automatically.
Mode SW (1) : MANUAL
The label is issued after depressing the PRINT key.
0.00 0.00 0.00
0.00
1.50 0.00
3.00 1.50 4.50
3
00
1.50
$4.50
PRKUbB &ma
NET ‘(IT: Kf3
a.*- s
19250 VAN NESS AVE.
TEL 213(320)8900
1. This operation is available only when the Random Item PLU is set to “Available” in initial setting.
2. Although the Random Item PLU is handled as PLUTO in the REG mode, it is handled as PLU# 999999 in the PLU file.
- 20 -
Ehi1-31015D
13.2 FIX PRICE REGISTRATION
Control lock : REG, M.DOWN, or REWRAP Mode SW (2) : FIX
[Example A] In the event that an unit price of $1.25 is set for PLU#33.
-
. . . . . . . . .
~:‘;:y,::‘: ‘, : :gi& :
Jj$ i:’
:.:.:./j:.\:.
.::.:.::.:.:. . . .
1 2 3
4
Enter the PLU#. Depress the PLU key. Place a commodity on the platter.
(ex. 1 lb.) I
Mode SW (1) : AUTO
The label is issued automatically.
Mode SW (1) : MANUAL
The label is issued after depressing the PRINT key.
[Example B] In the event that an open unit price is set for PLU#32.
yyEy7-Y
,... . . . . . . . . .
. . . . . . . :.,. ,.
?$g,~
:‘ti;,
i .::. :.:.:. +
:&:~,:.:>:
.:.i :.. .:.:,. ;
1
2
3 4
5
Enter the PLU#.
k-L4
Depress the PLU key.
Enter the price. (ex. $2.00)
Place a commodity on the platter. (ex. 1 lb.)
Mode SW (1) : AUTO
The label is issued automatically.
Mode SW (1) : MANUAL
The label is issued after depressing the PRINT key.
0.00 P I
I
000032
0.00 0.00
0.00 2.00
1 .oo 2.00
I 1
CHOCOLATE
MERINGUE PIE
PACKEDON
!!iF JY
OEC 5
19250 VAN NESS AVE. TEL 213(320)8900
II
- 21-
EMl-31015D
13.3 BY COUNT REGISTRATION
(standard
function)
Control lock : REG, M.DOWN, or REWRAP Mode SW (2) : BY COUNT
[Example A] In the event that PLU#302 and a price of $3.00 per 6 pieces are set in the speed key
:.:.. : .)... .,.,L..., ..
:,$&P
::$$ : ::.:.: ,... 1:.
.,. ., .,.
a
1 2 3
NOTE When Mode SW (1) is in the “AUTO” position, the desired number of identical labels can be
obtained by just depressing the PRINT key to issue the first label, then a next label will be
issued once after peeling it-until depressing the CLEAR key.
#21.
Enter the speed key #21. ---.--I P 61 3.001 Depress the PRINT key. Mode SW
(1)
: AUTO Labels are issued in succession after they are peeled.
Mode SW (1) : MANUAL
Single label is issued.
I I
I
19250 VAN NESS AVE. TEL 213(320)8900
II
[Example B] In the event that a price of $2.50 per
12
pieces is set for PLU#303.
Enter the PLUH. Depress the PLU key.
---.--
Depress the PRINT key. Mode SW (1) : AUTO
Labels are issued in succession after they are peeled.
Mode SW
(1)
: MANUAL
Single label is issued.
19250 VAN NESS AVE.
TEL 213(320)8900
- 22 -
EMl-31015D
[Example C]
In case of purchasing 10 pieces of commodity at a price of $1 .OO per 6 pieces
*----* SPLIT PRICE
(In the event that a price of $1 .OO per 6 pieces is set for PLU#39.)
Enter the PLU #. 2 Depress the PLU key. 3
Enter the quantity of purchase.
(ex. 10 pieces) ... max. 2 digits 4
Depress the PRINT key.
5
Mode SW
(1)
: AUTO Labels are issued in succession after they are peeled.
Mode SW (1) : MANUAL
Single label is issued.
---.-- P
---.-- P 6
---.-- 10
---.-- P 10
1 DONUTS
., : :.:::j:j :,ii:::i:::::r::i:i, .A:.,:: :) ;::$nj$&, : I .N:
-..P..Rf.G~.i,. .-$;:
. L... . . . .:...\... . . . ..i.
. . . . . . . . . . ._......
.:::::::::j.:.:.: ;:.:.>:‘-:
. . .;j,:..j,
000039
1.00
1.00
1.68
PACKED ON
DEC 4
10 tws
$1,68
PRiCE/?b@ m WiVT. =
* ..I s
19250
VAN NESS AVE.
TEL 213(320)8900
1 1
EMl-31015D
13.4. BY COUNT REGISTRATION (optional function by initial setting)
Control lock :
REG, M.DOWN, or REWRAP
Mode SW (2) : BY COUNT [Example A] In the event that an unit price of $1.75 is set for PLU#31.
Enter the PLU #.
13111 ---.-- P
000031
Depress the PLU key.
---.-- 1.75
0.00
Enter the quantity of purchase.
---.-- 2 1.75
(ex. 2 pieces) Depress the FOR key.
---.-- P 2 1.75 Depress the PRINT key. Mode SW (1) : AUTO
Labels are issued in succession
after they are peeled.
Mode SW (1) : MANUAL
Single label is issued
11 BLUEBERRY PIE 11
PACKED ON
!;F 1
DEC “5
$1.75
F’RiCE~b~ Lrsn
8 1 8’ -” s
19250 V&N NESS AVE.
TEi 213[320)8900
- 24 -
EMl-31015D
[Example B J
In case of purchasing 6 pieces of commodity at a price of $2.75 per 3 pieces
... ... SPLIT PRICE
(In the event that PLU#826 and a price of $2.75 are set in the speed key #40.)
Depress the speed key #40. Enter the quantity of purchase.
(ex. 6 pieces) Depress the FOR key.
Enter the quantity for that price. Depress the FOR key. Depress the PRINT key. Mode SW (1) : AUTO
Labels are issued in succession after they are peeled.
Mode SW (1) : MANUAL
Single label is issued.
2.75 6 2.7
P 6
2.7
3 2.7
P 3
2.7:
P 6 5.54
LARGE SHR IMPS
PACKED ON
ilk! E/Y
DEC 5
$5.50
PRICE/lb@ w
, . .I- E
19250 VAN NESS AVE.
TEL 21X320)8900
- 25 -
Ml-31015D
13.5 TARE FUNCTION PROCEDURES
Control lock : REG, M.DOWN, or REWRAP
Mode SW (2) : WEIGH or FIX
There are two kinds of tare subtraction procedures, one is “Direct tare”, the other is “Preset tare”.
1) Direct tare subtraction
j::xj::,:::::, :’ :
_i L.. . .
. i.........
3i%i;,
I:.:&$ .’ : : ::,::::. :.
.A.. .A.... /..
1
2 3
4
NOTE
Place the tare on the platter. (ex. 0.20 Ibs.)
3epress the TARE key. rNeighing operation.
ex.) Enter the PLU#.
p-jqq
Depress the PLU key. Place a commodity on. Depress the PRINT key.
qemove the commodity together with he tare. rare weight is cleared automatically, hen PLU data is returned to the PLU ile.
0.20 P
0.00 P
I
0.00 P
0.00 1.50
1.00 1.50
-_­‘:~~~~~
;,,pfg.$
,.. . . . . . ..i. . ../I .A... .A.,
..). .: . . .A> . . . . .
00000
00000~
00010
0.01
1.51
BEEF LIVER
PACKEDON
DEC 1
SELL BY
DEC 4
1 .oo 1.50
$1.50
e KETW. =
,..- 4
19250 VAN NESS AVE.
TEL 213(320)8900
0.00 P
I
00000~
J
--II
3 I 1
-;;I
;;i;:
p :.
c : :.
K..
Tare weight subtraction is available up to 30 Ibs.
When tare weight ‘subtraction is in operation, however, the scalable range for net weight is decreased by the amount of the tare.
(Net weight = Gross weight - tare weight)
- 26 -
EMl-31015D
2) Preset tare subtraction
::;-::;*::::
.,. . . . . ,.,., . ‘.
g&
:;;i& j
.’ . . . . . . . . . . . .
.:.:.: :...:.:..
a
1 2 3 4 5
Enter the tare weight. (ex. 0.20 Ibs.) Depress the TARE key. Place the tare on the platter.
Weighing operation.
Remove the commodity together with the tare. Tare weight is
cleared
automatically, then PLU data is returned to the PLU file.
--
., .-.:.::: . . . .
,. .,
..i -.. ..-.-.
.., ,.. ,.. . . . .
P P P
P
3) Preset tare subtraction when tare weight is included in PLU data (optional function by initial setting)
[Example]
In the event that tare weight of 0.20 pounds is set for PL
J#825.
s j ;::g;;:i’i:,:
ii&#p g?$+*
. . . . . . . . .
:.::::::::: :.:y: :
,,::~:~:$.:.::.: :
__(
1 2 3
r , I 1
Enter the PLU #. 18[2151 Depress the PLU key.
If you want to change the tare weight
temporarily ;
Depress the TARE Key. Enter the new tare weight.
Depress the TARE key.
Place the tare on the platter. Weighing operation. Remove the commodity together with
the tare.
PLU data is returned to the PLU file.
*--r+*r-
.:i:~.~3:L::::~iiSi:~;::
.‘gzc+&~~‘ii’i
i. .-. . ..i i., \. ,.i
g.&$.$.::
., .,.,., .,.,. ,. ,.,.,.. ..:.:.::.:,:.::::::::: y,:,:,:.:
P
1.25
1.25
1.25
P
T
:::,:::::::::.:.:::.:r.:.:
. . .C’. .:.:::.:,:,:r,.::.,
yaTg.,i
: &g@,
:. . . ..-.......,,...
. . . ,.... . . . . . . . . . . . :.
:...:3:.: ‘. ‘::.::.::.i...::y . .
..-L;rrbAir.L
000825
0.00
000000
- 27 -
EMl-31015D
13.6 SAVE KEY OPERATION SAMPLE
Control lock :
REG, M.DOWN, or REWRAP
Mode SW (2) :
WEIGH, BY COUNT, or FIX
The SAVE key is used to save tare weigh, unit price, and PLU data after taking a commodity off the
platter.
6
7
8
9
10 11
12
Place the tare on the platter.
(ex. 0.20 Ibs.)
Depress the TARE key.
Enter the PLU#. (ex. PLU#lOl)
Depress the PLU key.
Depress the SAVE key. The tare weight and PLU data are saved.
Place a commodity on. (ex. 1 lb.) Mode SW (1) : AUTO
The label is issued automatically.
Mode SW (1) : MANUAL
The label is issued after depressing the PRINT key.
Remove the commodity together with
the tare.
Depress the CLEAR key. Save mode is cleared.
Enter the 0.
0
0
Depress the TARE key.
The tare weight is cleared.
Depress the PLU key.
The sacle is returned to the initial
mode.
1.50
1.50
1.50
P
- 28 -
EMl-31015D
13.7 VOID KEY OPERATlON SAMPLE
Control lock : REG, M.DOWN, or REWRAP
Mode SW (2) : WEIGH, BY COUNT, or FIX
On depressing the VOID key, the data of the last registration is subtracted from the memory.
-
..i_. .A.......
,. ,. : . ..z.::y .,
;;&i
:..Nw
. . . . . . . . . . . . .
:;;‘i:i;,f:,;,;i i,’
1
2 3 4
5
13.8 DATE CHANGE
Enter the PLU#lOO. Depress the PLU key.
Place a commodity on the platter.
Mode SW
(1)
: AUTO
The label is issued automatically.
Mode SW (1) : MANUAL
The label is issued after depressing the PRINT key.
Depress the VOID key. The data is subtracted from the memory.
Control lock : REG, M.DOWN, or REWRAP Mode SW (2) : WEIGH, BY COUNT, or FIX
The date can be changed temporarily.
NOTE
Depress the DATE & TIME key. Enter the new date.
ex.) Dec. 5, 1989
120589
T-CL
Year (00 lo 99)
Day (01 to 31)
- Monlh (01 to 12)
Depress the PRINT key.
.:.:.: :.:.:.: :.:.:.;.:.:.:.:.:.
.: .,...,... >> . . . . . . . . . . .,., ,.
.f :: Q& !.X;1. I
$$.fc.,.
.,.:,:.:...:.; :: i .:,< .: :
P
3.00
3.00
---.--
3.00
i :... .,. ..::.;::‘,..:.
~~~~~~.
t.FSRlCE ..
.,.
. . . . ..i .,:. . . .
,. _.. . . :.’
:~:.3’...-.:: ~ .:,::,
_/ ‘_.> . . . . :... . . . ._..._..
000100
0.00
3.00
---.--
3.00
i 20589
000000
!zzz
:.:.:.:.:.
,:.::::y:
PI:.. E:
:y;
., ,. .,
u _
-
The SL-5900 will check details of date input, and any wrong date will result in an error mode.
The correct date should be re-entered after depressing the CLEAR key.
- 29 -
EMl-31015D
13.9 CALLING AND PRINTING A GRADE LINE
Control lock : REG, M.DOWN, or REWRAP Mode SW (2) :
WEIGH, BY COUNT, or FIX
A required Grade Line of those programmed (maximum 49 Grade Lines) can be call and printed on the label to be issued, for the purpose of adding a short message to the commodity name.
. .
. . . . . . .
i.. ..i. .
.,;
.:.:...:.:.:.:.: .:
::,: .// >:I::,:
f$&? I ‘:‘:j@; :: >;:+::::-
i::zi:i:;:::i:
m
1
2 3 4
5
Enter the PLU#lO9.
Depress the PLU key.
Depress the G.Line key.
Enter the required Grade Line #3
(Max.49)
Depress the PRINT key.
NOTES : 1.
2.
3.
4.
---.--
------
P 3
1 .oo
The Grade Line # to be called in this operation must be one of those programmed beforehand. If a Grade Line # of no programmed data is entered, a “DATA ENTRY ERROR” will result on the following [PRT/*] key depression.
When a Grade Line Entry is operated after a PLU Entry as in the example above, the
Grade Line content is not displayed in the Messasge Window but is printed on the label. On the contrary, when a Grade Line Entry is operated before a PLU Entry, the Grade Line content is displayed in the Message Window but is not printed.
The Grade Line print position (above or below the Commodity Name line) is determined by Initial Setting.
The maximum number of grade line characters is 26.
- 30 -
EM-31015D
13.10 ENTRY BY CLERK
Control lock : REG, M.DOWN, or REWRAP Mode SW (2) : WEIGH, BY COUNT, or FIX
The entry by clerk mode is used to print out clerk sales data on labels.
g& 9’,fj&J::.,
.::.:+..:..:. >.
1 2 3 4
Enter the PLU#33.
Depress the PLU key. Place a commodity on the platter. Depress the CLERK key.
Depressing the CLERK key allows a receipt to be printed out.
NOTES : 1. PLUS can also be called by using the Speed key.
2.50 0.00
2.50 2.50
2.50 2.50
2. In the entry by clerk mode, a label is manually issued and its data is recorded in the CLERK TOTAL memory, regardless of the position of switch
(1).
- 3t-
EMl-31015D
13.11 ADD ENTRY BY CLERK
Control lock : REG Mode SW (2) : WEIGH, BY COUNT, or FIX
The add entry by clerk
mode
is used to print out receipts.
Enter the UR key. Enter the PLU#l50. Depress the PLU key. Place a commodity on the platter.
ex.) Depress the CLERK key.
Depress the 0 key. Enter the PLU#20. Enter the VOID key.
Enter the PRINT key.
-
NOTES : 1.
The Speed key can be used for calling the first PLU but cannot be used after pressing the 0 key.
2. Depressing the CLERK key causes the item total to be displayed as “SUB-TOTAL”.
3. There are three kinds of void operations:
1)
Item Correct . _ . . . Depress the CLERK key, followed by the VOID key.
2) Void . . . . . . . . . .
Deletes an item which was previously
added.
3) All void . . . . . . . .
Depress the 0 key, followed by the VOID key.
4. Up to 48 items can be added in the add entry mode.
- 32 =
EMl-31015D
13.12 MULTIPLE WEIGHT
Control lock : REG, M.DOWN, or REWRAP Mode SW (2) : WEIGH
This mode can be used when the option for multiple weight has been selected, and the entry unit
price can be changed or the unit price is open.
-
;$~;g,::~:;: :
.’ . .I. . . . .
,...,.,.,. ,.
$g@P. ;;::.:+..
:::.:.:.:.::.:. .,,\,
1
2
3
4
5
Enter the PLU#60. Enter the Purchased Quantity.
(Numeric entry =
l-9)
Depress the FOR key. Enter the unit price. (ex. $5.5)
Place a commodity on the platter.
yz?Tzyxr
. . ‘.. . . . . . . . . . .
j .:.:.:y fli,, :
..~@&~::
.:...:.>..: .(..,. :.:.:.,.:...:
,.,
1 3.00
1 0.03
3 0.00
3 5.50
3 5.50
0.00
0.00
0.00
3.68
:I.: W:
.Xl I
.J. :: rJ :
.L
-
ex) The amount for buying 21b of a product which costs $5.50 per 31b is automatically calculated.
- 33 -
EMl-31015D
14. TOTAL OPERATION PROCEDURES
When the control lock is set to the “X” or “Z” position, it is available to issue READ or RESET reports. When the control lock is set to the “X (READ)” position, the totals will not be cleared as they are printed on labels (for except the hourly report) or report paper. When the control lock is set to the “Z (RESET)” position, the totals will be cleared as they printed on labels (for except the hourly report) or report paper.
NOTE: Before printing out totals on the report paper, change the initial setting.
14.1 HOURLY TOTAL REPORT
The hourly total report is printed on report paper only.
Enter the report #l.
HOURLY REPORT
bEIN
MnIKEI 16 EC/ l/89
STOREI 7 1942
IKUR CtulT wuil wwds
15-16 69 36.93 107.65
f % 17.7
16.17 65 51.75 1266.11 I % 2lJ.B
17.18 ia aha ill.60’
s 4 18.3
18-19 12 50.83 121.56
s % 20.0
19-m 93 61.88 161.67
s % 23.3
TOM 267 2h1.87 600.29
EMl-31015D
14.2
GRAND TOTAL REPORT
::$;:g;:;:;:::. ;
.: ,....: . . . . . . . .
:~f.g
p$[::
. .
::::$i:$$:,:’ . . . .
.-...........
2.. . . .
1
2
3
4
Enter the report #2. Depress the PRINT key.
2
2-
Enter the total memory #.
#1 : Day total (Normal) #2 : Mark Down total #3 : Rewrap total
21 22 23
Depress the PRINT key.
nn
Day total :
GRAND TOTAL
PACKED ON
DEC I
NO
SELL
BY
NETw2g34 390 680.20
. l
PRKVlbB &g&e&&
l . -.
19250 VAN NESS AVE.
TEL 213(320)8900
,
Mark Down total :
GRAND TOTAL
HO
PACKED ON
DEC 1
SELL
BY
7.98 30
27.42
PRICE/lb@ w NETWT. m
, 4 --,
Rewrap total
I
19250 VAN NESS AVE.
TEL 213(320)8900
GRAND TOTAL
PACKED ON
RQ
DEC 1
SELL
BY
7.54 999856 27.54
NETVIT. UBi4 PFlfX/?b~ u
( > .-
19250 VAN NESS AVE.
TEL 213(320)8900
P : W:
$ :.
2 .: :’
k:::
-
GRAND TOTAL
l&m REm
fwltrS 16 Kc/ l/89
smll 19:Y
CaJlil Rluil rJuRQ3
TOllI 39l 236.3 680.20
GRAND TOTAL
iN%wllwJ
ftxnIH1 16 DEc/ 149
mREl7
19:#I
m lmr rm.M
TOTi%
30
7.98 2I.U
GRAND TOTAL
- 35 =
EMl-31015D
14.3 PLU TOTAL REPORT
1) Individual total
[Example]
Individual PLU total (PLU#lOO) in the day total memory.
1
Enter the report #3.
2
Depress the PRINT key.
3
Enter the total memory #l.
4
Depress the PRINT key.
5
Enter the search code 1.
Code 1 : PLW
Code 2: UPC# Depress the PRINT key. Enter the PLU#lOO. Depress the PRINT key.
-I-Y-yY .::..::.:... ‘:~‘l.::.:,‘:’
‘~~~~i:i
,:,$@iE:g..‘: ,. .._ .,. : /\:... :.:. .
,: -‘::~:.:‘.:i::ll.:::,::~:?:~.~,
3
3-
31
31 -
311
311
q
311
q
311
PLU TOTAL
PACKEDON
DEC 1
PLU# NO
SELL BY
PLU REPORT
000100
Ftu I ODolDl
NolwlRFAD
2h
95.99
287.97
im.0
5 OF GfW IDOIUYISI
42.3
- 36 -
EMl-31015D
2) Block total [Example] UPC block total (UPC#250820-250829) in the mark down total memory.
1
Enter the report #3.
3
2 Depress the PRINT key.
3-
3
Enter the total memory #2.
32
4 Depress the PRINT key.
32
-
5 Enter the search code 2.
322
6 Depress the PRINT key.
322
q
7 Enter the UPC#25082.
322
0
8 Depress the 0 key.
III
322
IJ
9 Depress the PRINT key.
322
25082
25082
-
3
NOTE : The m kev reoresents 0 throuoh 9.
. .
Most significant digit in starting number followed by
approzte number of the 0 keys.
III
PLU TOTAL i
PAWEDON ~
UPC HO
DEC 1 ~
SELL BY
25082-
2.66 2 6.12
e
NFfWL
=
‘ , .-
19250 V&N NESS AVE.
TEL 213(320)8900
PLU REPORT
LREm-
MaoMREfa
IfICIIIH# 16
MU 1189
srma 7
Whl
Ft coull RIGHr WllM s x
2sam 2 2.66
6.12 1M.O
KM 2 2.66 6.12 1M.O
5 OF c&id
[WUIIRSI 22.3
- 37 -
EMl-31015D
3) Zone total [Example]
PLU
zone total (PLU#lOO-303) in the rewrap total memory.
7
:p$.;:f$f:!. :.:.>:...:.,.~ ‘[$$+-.&
jJ&j;’ ., ., ,...,
. . ..v.. . . . .
_i..._i i....
.:...:.:.::.:..
-
1
Enter the report #3.
2
Depress the PRINT key.
3
Enter the total memory #3.
4
Depress the PRINT key.
5
Enter the search code 1.
6
Depress the PRINT key.
7
Enter the start PLLMOO.
8
Depress the FOR key.
9
Enter the end PLW303.
10 Depress the PRINT key.
PLU TOTAL
PACKED ON
DEC I
PLU# RO
SELL BY
000100-000303
5.32 52
21.98
NETW. IlB
PRlCE/lb~ m
( , --
19250 VAN NESS AVE.
TEL 213(320)8900
PLU REPORT
~ufrm1m-mn#13 itfw ffm
tWtIH1 16 Kc/ 149
STaif# 7 1942
TOM 52 5.32
21.98
tm.0
5 OF GRIW WIwRsl 79.8
EMl-31015D
4) Entire total [Example] Entire PLU total in the day total memory.
Enter the report #3. Depress the PRINT key. Enter the total memory #l. Depress the PRINT key. Enter the search code 1. Depress the PRINT key twice.
PLU TOTAL
PACKED ON
PLU% NO
ALL
680.20
PRlCE/lb~ bm
19250 VAN NESS AVE.
TEL 21X320)8900
PLU REPORT
RU t flu HoRI#REAo
rYICHlRt 16 DEW 149
STW 1 19:13
Rut #WIT WM WURRS S%
Wl BLUEBERRY PIE tlmJ32 UtLln
3.54 9.m 1.b
tERlKX PIE
PA2 18.84 2.0
Km33 tdbhm#I
I 1.33 S.bl 0.8
m39 rsmi
62 0.m
10.36 1.5
MIxi CHlcKEH UIKi
181 0.M
bfJ.Ul 5.9
liiYJ83 ao5TEM
2.66 6.12 0.9
ml821 4 FltErS
2 6.63 lb.s! 2.1
au825 5wfs
Liil Siii
13.33 2.0
woBz6
11.M 1.6
tm9 &Ew)I(s
3 15.93 3s.as 5.3
999999 5 7.59 10.98 1.6
TOM 39u 2363 680.20 lM.O
% of Ijwyo ttlu%sl loo.0
- 39 -
EMl-31015D
14.4 CLERK TOTAL REPORT (for SL-5900-36 only)
1) Clerk total
This is valid only when intial set 1
l-l
is 1.
.:,:j:: ::..::: : ,.
::;g& ,;,Nij;.
.,............ ::..
.:.: :.:.:.:..: .
.,. ., ,.,.
:,;.:.:. >)>;
1
2
3 4 5
6
Enter the report #4. Depress the PRINT key. Enter the clerk memory #l . Depress the PRINT key.
Enter the total memory #.
#l: Day total (Normal) #2: Mark Down total #3: Rewrap total
Depress the PRINT key.
4
4-
41
41 -
411 412 413
41n
NOTE: When the option for label has been selected by initial set 9-2, the data for clerks 1 to 6 is printed
on labels in on-demand dispensing mode (a clerk is skipped if its data is 0), and finally the gross total is printed. For report paper, the data for clerks 1 to 6 and the gross total are printed.
I
CLERK TOTAL
CLERK TOTAL
PLCWON
FxclmoN
CLERK ll I
aEv~y2g
I.KAWAHATA
CLERK I 5
OCT 29
aE!L BY
A.SUZUKI
2 3.57
*flom -
"baa I... ux
4401-A BANKERS CIRCLE AT. TEL 123(233)8900
r
CLERK TOTAL
PAcxEt ON
CLERK il 2
NT
29
ant ay
JIW USHIJIHA
2
15.12
PXE,?I k.],&&,z& YIWT. m
4401-A BANKERS CIRCLE AT. TEL 123(233)8900
CLERK t ALL
_--
-‘-= CLERK TOTAL
tloRt!a REAO
ttxHINE10 ocrm9o
STOW 0 13:M 0fPT.W 0
CLERK ti CLERK NM ITEh5 OOLLMS
1 I.KIWAIYITA 35
2
JJH.USHIJlii :
3.57
3 : fiSU2W
I f f 2 15:12
6 0 0.w
TOTIll 6 22.26
-4o-
EMl-31015D
2) Clerk name
With the SL-5900, the setting PLU data can be listed on report paper when the control lock is set to
the “X” position.
..:.:.:.:.:::::.- ;. j
. . .A... .\..
ycxp’
;;;g@ ; : “, z::>y+
m
1
2
3 4
Enter the report 374.
4
Depress the PRINT key.
4­Enter the clerk memory #2. 42 Depress the PRINT key. 42 -
w
: .: ..,.......,... . . ..,. .,. .,
;: ,:giy$ ..::;
: ..;gRG;s:
.._ . . . . . . .-...:. . .
. . . . . . . . . . .
. . .
. . . . . . . . .
. . .
,.::.: : . . . . . . . . . . . . . . . . .
: . .
I
.._ . . .g
;r-
. . . .A..
..:...:.:.:
iiii
-
CLERK NAME
UEftKl
URK NRIE
.I
I.WIMIR
2 JiH.usIlJl~
-i
H.nlKITsu S.suNKI
5
R.YJ2MI
6
T.AspxA
- 4t-
EMl-31015D
15. LIST UP OF PLU DATA
With the SL-5900, the setting PLU data can be listed on report paper when the control
lock
is set to the “X” position (optional function by initial setting). Before listing, set the report paper on the label cassette and install it correctly in the scale.
4
Enter the report #51. Depress the PRINT key. Enter the PLU #.
ex.1)
List up the individual PLU report. (PLU #lOO) Enter the PLU #lOO.
sx.2) List up the
block
PLU report. (PLU #820 - 829) Enter the PL #82. Depress the 0 key.
PI
3x.3)
List up the zone PLU report. (PLU moo -303) Enter the start PLU #loo. Depress the FOR key. Enter the end PLU #303.
ex.4)
List up the entire PLU report.
Depress the PRINT key.
100
82
82-
EMl-31015D
W Sample Reports
Ex.1) Individual PLU report
PLU PROGRAMED DATA PLU PROGRAMED DATA
l-u I al1w
Ptu I BAYJlM-w3u3
tKliIRI 16
lw 149
ma 7 1945
Ptu I #)noolTy llEscvTlOH
mm T-M S&w
&t lZ!NO SfU / lb
3.ti
Tlyll 0.m SXLF LIFE 5
Ex.2) Block PLU report
PLU PROGRAMED DATA
RU I l.lw-
tWlIHI 16 ow 149
STcEl7 1948
Ex.3) Zone PLU report
MIIIM 16 EC/ 1m
STaa 7 1949
Iv4 t comITy llEslxIPTIW
aum T-~~~STW
m 1idtM Siffi / lb
3.M
ME 0.M YUF LIFE 5
ilm101 BEEF LIVER
w: lit+llOl s#R / lb 1.9
TARE 0.20 3El.F LIFE 3
MO102 W SlRtOlN
s12aER STEM
M tal[P 8w / lb
3.50
TfE 0.M SELF LIFE i
03103 oKlIla EEF
w: 1Mlm #ii / lb tlPEi/
TARE 0.m 3a.F
LIFE 1
ml1 Mu CHIcm
w: 1m1 m / lb 0.75
Tfa 0.m !!JaF LIFE 6
lIlm2 WlacN LEG5
w: 1m 8w 1 lb
3.M
Tfdif 0.M SELF LIFE I
cm03 MICKM Ullbi
w: 11303 Sffi 1 lb
2.50
TfE 0.M SELF LIFE s
EMl-31015D
Ex.4) Entire PLU report
PLU PROGRAMED DATA
DARE 0.00 ~ENIFE 4
omll wI.F CmIHs
w: lmt fiR / lb 0.75
TYIE 0.00 3ELF LIFE
6
m302 #IicKEHm
~ 120302 S’fii / lb 3.M
TrylE 0-m WLIR 6
an03
UmDl UlE
w: 1M303
m / lb
2.9
ME 0.m SELF
LIFE 5
m CaSTEMs
bt2508M ml lb
2.30
ME 0.M QELF LIFE 3
m#ul COD FltETS
m250821 m/lb
2.50
TINE 0.M 9El.F LIFE 3
LIB!25 YlfItPs
m = ml/2lb 1.25
TM 0.20 3aF LIFE
3
wo826 lHESMItf’S
w:250826 #!I lb 2.75
Mf 0.00 SW LIFE
1
MO829 fiiuaDs#wDwwN(s
w:250829 #fk!/ lb 2.25
TM 0.m w
LIFE 7
999999 Rm m/lb @f/i
rta 0-m WLIR 0
-&I-
EMl-310150
o Changing Unit Price or Price
The unit price or price in the PLU that is previously stored can be changed with this menu.
Menu #.
PLW.
New unit price or price.
ENTER
I
1
2 5
0
TEST
The setling
label is issued.
’ ii
PROG.
(Select another menu or mode.)
w
,j.:::.:.:;+:
;,: :y:...:.: ..:
,y.J$i
. . . . . . . . . . . .A....
~~~~
. . . . . . . .
,......... .\
._.,. __ ./,.
..:::,:...;.:. :‘::::.
p&&&&
P
PO
PO
PO
PO
PO
0
31
101
1.50
1.25
101
0
NOTES:
I. Recalling a PLU# that has not been stored in the FLU file will result in an error.
The smallest PLU# in the memory is displayed.
-
L
2. It is not available to change the unit price of a PLU if it has been set to “open price”.
- 46 *
EMl-31015D
1 Menu No. 1 1
l
Setting or Changing PLU Data
Setting or changing the contents of PLU (PLU#, UPCX, Commodity Name, etc.).
Menu #.
AUTO CODE for the UPW.
PLU#.
I 1
UPCH.
(continued on next page)
P
Pl
Pl
Pl
Pl
Pl
Pl
Pl
‘1
1
10
10
1
1
2
2
3
NOTE: UPCX is set after overwriting with the data of AUTO CODE.
ex. 1) Input 101 ex.2) Input 1234
AUTO CODE : 120--- AUTO CODE : 120---
UPC# : 120101 UPC#
: 120234
The smallest PLU# in the memory is displayed.
- 47 -
EMl-31015D
Commodity
2nd line setting.
Quantity.
Unit price or price.
r-l
ENTER
‘T Opentprice.
w
Unit price flag
I
ENTER
ENTER
~-__
‘6’
w
2
(continued on next page)
Pl
Pl P
'1
'1
'1
'1
21
Pl
'1
'1
'1
4
5 0
10
0
3
0.00
1.50
L-l
­:,, .e
g:’
E‘i )y
j:: j
&
EMl-31015D
Shelf
life.
Tare weight.
rh
2 0
i,_l
ENTER
+
a
WEIGH mode
-0
BY COUNT mode - 1 ---b
FIX PRICE mode - 2 -----b
I
PROG.
(Selecl anottler menu or mode.)
NOTES:
?l
‘1
‘1
‘1
‘I
‘1
‘1
J
0.20
0
0
1
2
101
1
1. The commodity name can be set in two lines.
Each line can contain up to 26 characters
including spaces. Before setting the second line, depress the RETURN key.
2. When the quantity is 1 or more (PLU in BY COUNT mode), the unit price flag is skipped automatically.
3. When the quantity is 1 or more (PLU in BY COUNT mode), the tare weight setting is skipped automatically even if the tare weight setting has been enabled.
- 49 -
EMl-31015D
n
Deleting PLU Data
Menu #.
PLW.
cl
PROG.
(Select another menu or mode.)
P
Pl
Pl
Pl
Pl
NOTE: All the data programmed for PLU#103 in the PLU file is deleted. If the scale goes into error
during a PLU
deletion,
it has not been reset or PLU# designated in the above procedure had
not been preset in the PLU file.
-51 -
EMl-31015D
1 Menu No. 2 1
l
Setting Store Address or Commercial Message
With the SL-5900 scale, the store address or a commercial message can be set in the memory.
Menu #.
Enter the address
or commercial
(Select another menu or mode.)
..: ji.:.j:~:::::~:‘:~~:l;~: : :qg;g,;
..i ‘..:.::.:..: ‘,,
; .pBtCE :
:. : :.:.: . . . . . . . . . . . . .//
,., :., ..:.:...:.p>:.: >:.
2
1
0
2
NOTE:
The store address or a commercial message can be set in two lines. Each line can contain up to 26 characters including spaces. Before setting the second line,
depress the RETURN key.
- 52 -
EMl-31015D
l
Adjusting Print Position for Label
When a printed
data
position deviates from the normal position in the forward or
backward
direction
along the label feed direction, adjust the print position using the following procedure.
m
_,_,. . .
A.
Fj,
..i..
g;; ..:...:.:,.:
-
-
,:
: ‘li
P3 Ll 100
t
il
.:I
:‘!
Y
1
P3
Ll
- Standard
110
Menu %.
Feed value. (O-199)
ENTER
%
1 gradatic
P3
P3
1 dot = 0.154mm
L2
5
t
L2
6
St:
far
va
va
-
-
t
5
Standa
Commodity name
position. (0- 9)
1 gradation = 3 dots = 0.462mm
P3 L3
P3 L3
rd
Address position.
(O-9)
4
ENTER
%
1 gradation = 3 dots = 0.462mm
1
P3 Ll
P
110
3
1
(Selecl another menu or mode.)
-L-
-
NOTE: When the print position for a commodity name is lowered or raised, the print position for the
address is also lowered or raised. After adjusting the print position for the commodity name, make sure to confirm the print position of the address.
- 53 -
EMl-31015D
l
Setting Date, Time, Machine Number, and Store Number
..K
_,...,
. . . . . . :...
?; t..
F:.:, ..,.7.:.
iLi
c
I-
1 -
;’ .: ‘:&
.‘.-.I g.:.,;. 8”:
s:.:’ ‘:k :. A:: :c.,, $‘i ;: :: 1.1. ‘o 1. (+’
:,11
t,:‘;... g ..:. A:.;. &::
4
i 13089
12
1201
120189
800
15
1530
16
7
la
120189
4
Month (01 - 12)
3
‘4
‘4
‘4
‘4
‘4
‘4
‘4
‘4
‘4
3
Menu #.
Current setting date
Dale. (cx. Dec. 1, 1989)
0 1
liEI
a 9
Day (01-31)
Year (00- 99)
El
ENTER
Current setting time.
1 5
l!!l!J
3 0
Time. (ex. 15 : 30)
Hour (00- 23)
Minule (00-59)
czl
ENTER
Machine #.
Slore #.
DEPT# MAX. 5 digits (for C4-36 only)
(Select another menu or mode.)
1- - -_
L
NOTES:
1. Express all time in a 24 hour military format.
2. The SL-5900 will check details of date (time) input, and any wrong date (time) will result in an error mode. The correct date (time) should be re-entered after depressing the CLEAR key.
-54-
EMl-31015D
1 Menu No. 5 1
l
CMT Operations
The SL-5900 is designed to interface with a Cassette Magnetic Tape loader. The CMT loader allows the transfer of the entire PLU file from the SL-5900 to magnetic tape. This can be accomplished in a number of operation steps.
In turn, information from the magnetic
tape can also be transferred to another SL-59bO.
Menu #.
SAVE (59004XlT)
VERIFY
(5900 = CMT)
LOAD (5900tCMT)
VERIFY
5
I
PROG.
Load the tape into
the CMT loader.
(5900 = CMT = SL66)
LOAD (5900cCMTtSL66)
Rewind the
Tape.
n
iI--
I
3
m
(for SL-5900-35)
----Em+
(for SL-5900-35)
(Se&l another menu or mode.)
. . . . . . ..~... ./.. . . . . . . . . . . . .
,. ,.... . . . . . . . . . . . . . . ..\... . . . .
.jij,.,.,.,,,.i,.,.,. .,
.;.:.:.: .,.j,.j,,.,.,,,.,.,.,.,.. :“~~~~: i
:_i ~~~~~EI’ i
:::~~j’:ii:I-!p:‘:::~:.: .:
P
P5
P5
P5
P5
P5
P5
P5
P
P
5
1
2
3
12
13
n
5
L
- -
7
I: ‘.
r3.. / ‘:.
5.” , j.:.
!g ;;1.
1:
-
or 13)
-
!
- 55 -
EMl-310150
NOTES:
1. The error mode can be released by depressing the CLEAR key, and operated again through the above steps.
2.
Use the metal cassette tape which is commercially available and has a capacity of 45 or 60 minutes recording.
3. For operations of the CMT loader, refer to the instruction manual provided with the CMT loader.
n
Error Code during CMT Operations
TOTAL PRICE
pRq
A
Error Code Phenomena
l-7
Hardware error
8 Verify error
-
1 Character over error
2
BCC error
4
Data error
8
Time out error
- 56 -
EMl-31015D
l
Changing Bar Code Format
With the SL-5900 scale, three kinds of bar code formats are available : Weighing format, By Count format, and the FIX PRICE format.
These formats can be changed freely.
Menu #.
Switch over_the setting item
Skip Ihe digit.
Set Cl.
Sol CZ-C6.
Sel Pl -P4.
Menu #.
WEIGH mode.
BY COUNT mode.
FIX PRICE mode.
RECEIPT mode. (lor C4-36 only)
I I
-l-
-2-
-3-
­6
IENTE;;lz=
0 0
B
NEXT
PLU
I I
(Select anolher menu or mode.)
P
P7 P7
P7
P7
P7
P7
P7
P7
p7
‘7
‘7
‘7
‘7
‘7
,
.c,. 3 ...,....:,..i:.:,~
::f&&$ ,;g!$$g
.,:: >..::-::::.:::::.:.:.:.;:.-
:.,“:::::‘:‘.~:::::::::i:j: ..
.--
I
.
c
E
1
1-o
3 1-o
3 l-2
3 3-2
I
3-3
I
5-1
i
5-l
I
1-o
7
:.:.:, ::..
. . . .
::,.,. 9:
ii : .:.
: ..:. iu:
Pm­g-
H::
x:
.L
-
- 57 -
EMl-31015D
NOTES:
1. In this scale, the previously set bar code format is cleared by RAM clear, and can be switched to the following formats. Therefore, it is necessary to set the bar code format again after RAM clear.
Bar Code Format by Initialization: 0 Weighing format
C2 C3 C4 C5 C6
PC/D Pl P2 P3 P4 C/D
8 By Count Format
C2 C3 C4 C5 0
0 0 0 C6 C/D
8 Fix Price Format
C2 C3 C4 C5 C6 PC/D Pl P2 P3
P4
@ RECEIPT Format (for C4-36 only)
0 2
D2 D3 D4 D5 D6
PC/D Pl P2 P3 P4 C/D
2. When the ENTER key is depressed, format check is executed, resulting in an error in the following cases.
0 Price check digit (PC/D) cannot be calculated. 8 Price is not set serially beginning from Pl.
0 The format does not comply with the bar code format.
3. Check digit (C/D) is set automatically to the digit-13.
4. The usable keys to set the column are as follows:
5. Digits and display of PLU#.
FLAG
PLU# UPC# PC/D
El -I i-i-l -I
P&E 1 1 ; ; DEPT# (for C4-36 only)
PLU#
Display
2 3 4 5 6
2-l 2-2
2-3
2-4
2-5 2-6
- 58 -
EMl-31015D
6. Digits and display of UPC#.
UPC#
Display
7. Digits and display of price.
Price
Display 5-1 5-2 5-3
5-4
8. Digits and display of DEPT#. (for C4-36 only)
DEPT#
Display
9. Setting items.
1
2 3 4 5 6
3-l
3-2
3-3 3-4
3-5 3-6
6-l 6-2 6-3 6-4 6-5
2
3
c
Flag d PLU# -----b UPC#
DEPT# b Price
- PC/D
6 5 4
- 59 -
EM1 -3101 SD
1 Menu No. 8 1
a Assigning Speed Keys
The SL-5900 has 60 PLU speed keys which are very convenient to call a PLU quickly.
Menu #.
Speed key #.
(1 - 60)
PLW.
/
ENTER
11
PROG.
(Select another menu or mode.)
P
P8
P8
P8
P8
P8
P
10
10
-ccrw ‘,‘.:.:.:::~:i::::.:.i:::;::::
:~~~~~I:
>,.>> ,.,._. >: .,/ ..: . . . . . .
-FRfc.,:;;
f ‘*
.i:.. ..,.... i........ . .
.::::::::::::::::il:i::3:::i: : ,.
..>:...> . . . . > . . . . . . . . . . . . . ..( . .
mAd
8
10
829
8
::..:I.::: v:‘: I .:
*t . . p ;
.:. :
,:...
&&
NOTE: When “0” is set on the speed key, if this speed key is pressed in the REG, MARK DOWN, or
REWRAP mode, the scale enters an error mode.
- 60 -
EMl-31015D
l
Setting Ingredient
Ingredient message can be printed on a label in maximum 45 characters per line, up to 6 lines with small signed letter.
Menu #
Enter the PLW
Call the next PLW. ;;tl,“e previous
el
ENTER
Call the Stored Ingredient Message.
Set the data on the second line and subsequent.
(Select another menu or mode.)
.?:x:::::::::z$:x:::~:+j.~: ::::::.:.:::::::r:s.:,:r.:.. ,.,.,., :;
~~~~ ~~~~~~
,‘.,.,.... . . ,,,(,,,
::::::::.:::::j:::::::::;:$ :.::::q
‘.‘. .V’. . . . . :.:.....: ._.,.,. . . . .
::::::::~:::::~:i::~:~:::.:::.+~:~,
:.:.:...:il.. .-.. i..
P
PI1 Pll
Pll
Pll
Pll
Pll
Pll
Pll
Pll
PI1 P
11
1234
1235
1233
0
12
12
4
1234
- 63 -
EMl-31015D
NOTES: 1.
ingredient data cannot be saved into CMT, PL-3 and RAM card for the TEC SL66.
2. This setting function can be used only after designating the PLU# by initial set g-6, 7 and 8, and selecting RAM capacity by initial set 14-4 and 5 fo secure a memory space. Data may be damaged if the initial set is changed during ingredient setting.
Initial Set 9
Initial Set 14
3. When no data is programmed for the PLU, ingredient cannot be set.
4. “PLU NOT FOUND” error occurs when PLU# not registered is entered.
5. The ingredient to be used for SEND or RECEIVE is cleared when entering this mode.
6.
“MEMORY FULL” error occurs when there is no memory space to register ingredient
data.
7. Plural PLUS cannot use same ingredient data. (PLU and ingredient data are in pairs.)
8. Any terminal in FUN System can transfer PLU and its ingredient data in pairs to other
terminals.
- 62 -
EMl-31015D
l
Issuing Confirmation Label (for SL-5900-35136 only)
Test Iabels used to confirm that a PLU previously present to this scale is present in the master file of the POS system, can be issued.
Menu b.
Sel the individual PLU #.
Set the block PLU #. (Ex. 820- 829)
Set the zone PLU #. (Ex. 100-303)
Set the entire PLU #
f-q-q-q-2
ENTER
/
L
To interrupl label issue.
To resumi label issue which has been inlerrupted.
To
cancel label
issue which has been inlernrpted.
- ENTER
- CLEAR ---+ 2
4
1 PROG. 1
(Selccl another menu or mode.)
. . . . . . . .
r
+,.::j
;:
L:
.::
2
- 63 -
EMl-31015D
1 Menu No. 13 1
l
Switching On-Line/Local (for SL-5900-35/36 only)
When the SL-5900-35 is used as a satellite in an on-line system, the “ID No.” and *Transmission
Delay Time” must be set by the following procedure.
Menu #.
Switch the using mode of the
scale.
Enter the ID #. (O- 255)
Select the transmission delay time (1 - 9).
(Refer to table 2)
Local * On-Line
FMCC-3)
Local
(Select anolher menu or mode.)
P13OF
p13t3
p13t3
p13t3
p13t3
p13t3
3
NOTE: The TMCC-3 baud rate can only be 4800 BPS.
n
Table 2 : Transmission Delay Time Table
60 80
5
100
Id
Id
tr
tr
Id
13
50
3
50
13
TR-Time (ms)
120 140 160 180
- 64 - - 64 -
-
EMl-3lOl5D
l
Setting Grade Line (for SL-5900-36 only)
You can set the maximum 49 kinds of grade line (26 character per line), and call one of them to print
it to on the label.
Menu #.
Q
ENTER
Enler the grade line #. (l-49)
Enter the characters.
(max. 26 chara.Iline)
I
I
ti
ENTER
CII
PROG.
. . . . . . . . . . . ..i.l........... y
‘:::::,:.:.:.~:,~~;,~~~,~:. :
I’$~~~: ; ; ,j3g@g.:
,.’ ~:.:.;.~:.r . . . . . :.i.,:.‘.:
.::::i~.~i:~:i:i:j::::::::
\...s-L~~. --.-
P
PI7
P17
P17
P17
P17
P17
:.
$.: r:,:
__-.
-
66
-
EMl-31015D
1 Menu No. 1% 1
l
Memory Card (for SL-5900-36 only)
PLUS are saved, compared, and loaded by using the memory card (128KB).
Menu #.
Save Compare
Load
Data display
Format clear PLU clear
-2
NEXT _
PLU
CLEAR
I
A
1
-8 O-
‘-9 8-
ENTER
I
I
1
P
P18
P18
P18
P18
P18 PI8 =‘18
u
‘18
=18
?18
P18
P18
u
P18
1
2
80
98
SurE
n
(n = 80 or 98)
- 66 -
EMl-31015D
NOTES: 1. If the PLU file cannot be saved into one memory card, the program will display the
message “INS NAOTHER CARD”. Then, replace the memory card and press the ENTER key so that the following data will be saved. For cancellation, press the CLEAR key.
2. Comparision of the PLUS stored in the memory card and those in the scale terminates normally even if other PLUS are left in the scale memory. Evern if the PLU data of the
scale ends, a data error results if other data is left in the memory card.
3. Of the PLUS stored in the memory card in loading the PLU file, the data found in the scale memory is overwritten and the data not found in it is added.
- 67 -
EMl-31015D
l
Error Information
The memory card is full
(nothing has been saved).
0
F;yLORY CARD
-_-. ---~.. .-
Format error (no PLU file is found in the memory card.)
o o
FORMAT ERROR
irror
-__-.--- ~--
Information
Data Error
0
DATA ERROR
)
No. of logos mismatched
DIFF. # OF DATA
- 66 -
EMl-31015D
l
Transmitting PLU File or Unit Price (FUN System)
Any terminal in the FUN system can transfer the data of its PLU file or unit price to other terminals for verification. In this case, the destination terminal (s) must be set in the REG mode.
Menu #.
Transmit PLU file.
Transmit unit price.
Verify PLU file.
Verity unit price.
(Select another menu or mode.)
., ./
. ::.‘.j:~~:::‘::.:.::.:~:.,.:.:.
y...... . ..>>..:.:::::.:::
,. .:.:::;,:,:.:.:.:.:.:.:.:.%:,:.,
: . . . . . ..~.N!g.;.
f.:&$jg:;.
:i.: :.::::.:.:.:.:.:...:.~:.:
. . . . ..I. .I.... . . . . . . . . . . ..\.
P
P20
P20
P20
P20
P20
P20
P20
P
-
. -::::::.:i::.::..:~~~.~:
:.:.:.:.:... .:.:.:.::.~.:.:.
j ~~~~~
j F%tict
., .,.
: ...:,:::l:.:i:~.j:‘si:~~
2
1
1
pon
2
1
2
1
2
n
0
-
NOTES:
1.
When the PLU data has been changed using menu #l and the data is to be transferred to
other terminals through the operating procedure described above, the PLU file transfer is performed.
2. When the unit price has been changed using menu #Cl and the unit price is to be transferred to other terminals through the operating procedure described above, the unit price transfer is performed.
3. While receiving data, the terminals stop all operations.
- 69 .
EMl-31015D
l
Setting Clerk Name (for SL-5900-36 only)
Menu #.
No. of Clerks Max. 6
No. 01 Characters
Max. 12
-1
-2
I
-3
I
-4 I
-5
I
ENTER
v
­:‘::::::,I:‘:;::::::::::::
,, . 2:. ..\ ::..:.c
.._ . . . . . . .._
:y$@
,;
:,:.. ,. . . . . . .A.. ..:..
.@3~.@
., ~.,., ,.::, . . . . . .
_.. ii 1. . . . . . . . ..A....
P
P21
P21
P21
P21
P21
P21
P21
P21
P21
- 70 -
EMl-31015D
n
Error Code during Transmitting
TOTAL PRICE
Error Code
Phenomena
1-7
Hardware error
8 Verify error
1
Character over error 2 BCC error 4 Data error 8 Time out error
All errors occur in the receiving terminal. The error
mode
can
be
released by depressing the CLEAR
key, then attempt to transmit again.
- ?l-
EMl-31015D
l
Setting Print Item #I ON/OFF
The setting specifies whether each print item on the registered labels is to be printed or not.
Menu #.
Packed on date.
Sell by dale.
Commodity name.
Address.
Bar Code.
PROG.
4
P-+
43
5
(Select another menu or mode.)
I
P
P40
P40
P40
P40
P40
P40
P
-
[Position of Print item]
Commodity Name area
40
00000
00001
00010
00100
01000
10000
40
I
Packed on dale
Bar Code
Unit Price or Quanlity
Weight or Quanlily
Address area
‘Sell by date
. $ symbol
Total Price
- 72 -
EMI -31015D
l
Setting Print Item #2 ON/OFF
The setting specifies whether each print item on the registered labels is to be printed or not.
Menu #.
Unit price.
Weight.
Total price.
$ symbol.
Quantity.
2
P-+
3
-=:
4
(Select anolher menu or mode.)
P
P41
P41
P41
P4
P4
P41
P
41
00000
00001
00010
00100
01000
10000
41
- 73 -
EM1 -310150
17. ERROR MESSAGE TABLE
Take the following action if an error message has appeared on the total price display and/or message display (option) with the buzzer sounding.
he CLEAR key, and set the
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
LABEL END
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PRT FAILURE
MEMORY FULL =
.~. .----___
e CLEAR key, and set after
CHARACT. OVERRUN pt is made to set more
__~__-
TOTALS OVERFLOW Total memory has overflowed Depress the CLEAR key, and turn the
at the time of issuing a label. I control lock at “Z” position.
Then sum
up the overflowing memory.
~~~~-~~ - ..~.....
PLU DATA ERROR Error of PLU data. Depress the CLEAR key, and check the
PLU data.
LABEL OVERRUN Label overrun. Depress the CLEAR key and the FEED
key. Then remove the label.
OP The RAM quantity initial set
Call for service.
,I. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ., data is different from the
OPTION RAM ERROR actual number of RAMS.
.
- 74 ”
EM1 -31015D
H CMT/FUN
Time out error.
Depress the CLEAR key.
BAD TAPE OR CMT Bad tape or CMT loader. Depress the CLEAR key, and change the
(Hardware error) tape or CMT loader.
I
18. BEFORE YOU CALL FOR SERVICE
It is our primary concern to give you full satisfaction and better service. If, however, any problem arises in connection with the operation of this scale, please check the following points before calling for service:
A) Is the power plug fully plugged into an AC outlet? B) Is the power turned ON?
C) Is AC power being properly supplied to the outlet? (Check it using another electric appliance.) D) Check the circuit breaker.
E)
Has there been a power failure of any sort?
F) Has the operation been carried out in the correct order?
This scale has been manufactured under strict quality control. If you have any trouble, however, DO NOT ATTEMPT TO FIX IT BY YOURSELF. Pull the power plug out of the outlet, and contact your TEC representative.
NOTE: The specifications are subject to change without notice.
- 75 -
PRINTED IN JAPAN
E
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use