Team Associated RC8B3 User guide

2

:: Introduction

Thank you for purchasing this Team Associated product. This assembly manual contains instructions and tips for building and
maintaining your new RC8B3 Kit. Please take a moment to read through this manual to help familiarize yourself with these steps.
We are continually changing and improving our designs; therefore, actual parts may appear slightly different than in the
illustrations. New parts will be noted on supplementary sheets located in the appropriate parts bags.
Check each bag for these sheets before you start to build.

:: KIT Features

Features in the RC8B3 Kit:

• Front suspension features pillow ball uprights for increased adjustability and improved durability

• Light weight ring gears and optimized precision ball bearing sizing, reduces drivetrain rotational mass for improved acceleration

and fuel economy

• Gearboxes feature a 3.38:1 internal gear ratio with fast access differentials for quick removal, tuning and maintenance

• Six universal drive shafts for efficient drivetrain power delivery and ease of maintenance

• Braking system features bonded pads and machined steel rotors for maximum braking force and reduced fade

• 7075-T6 aluminum 16mm “Big Bore” threaded shocks with TiN coated 3.5mm shafts, larger diameter precision springs, and

optimized bladders for more precise volume compensation

• 7075-T6 aluminum shock towers front and rear feature finely tuned shock mounting and upper arm positions

• Refined suspension geometry with lower hinge pin inserts for quick and easy roll center adjustments

• Light weight one-piece wing mounts feature height and forward positioning adjustment for more precise handling

• Carbon fiber radio tray with sealed receiver box keeps dirt and debris from receiver

• Large capacity fuel tank with floating clunk filter and optimized internal baffles keep fuel flowing in the most extreme conditions

• Proline RC8B3 clear body and Team Associated molded wing included

:: Additional

Your new RC8B3 Kit comes as a kit. There are some items you will need to complete your kit (refer to catalog for suggestions):

• .21 class rear exhaust engine • Muffler, joining pack, or manifold spring (#28045 or #28049 recommended)

• 2 channel radio/transmitter set with switch – FM/PCM/2.4GHz recommended

• Transmitter batteries (#302 recommended)

• 4.8-7.4v receiver battery pack

• LiPo - flat style (#304, 315) • LiFe - flat style (#305) • NiMH - flat style (#613)

• Model car fuel (30% nitro recommended) • Fuel bottle (#1748 recommended)

• Glow igniter (#1738 recommended) • Starter box (#1751 recommended)

• 1/8th scale buggy tires • CA (Cyanoacrylic) glue (#1597 recommended)

• Polycarbonate specific spray paint or polycarbonate specific bottled paint and airbrush

• Thread locking compound (#1596 recommended) • Needle nose pliers • Shock Shaft Pliers (#1675 recommended)

• Hobby knife • Reamer/hole punch • Ride Height Gauge (#1449 recommended)

:: Other Helpful Items

• Silicone Shock/Diff Fluids (Refer to catalog for complete listings) • Body Scissors (AE #1737)

• FT Turnbuckle Wrench (AE #89240) • Soldering Iron • Wire Cutters

• FT Hex Wrenches (AE #1655) • Calipers or Precision Ruler

• FT Nut Drivers (AE #1663-1668) • Green Slime shock lube (AE #1105)

Associated Electrics, Inc.

26021 Commercentre Dr.

Lake Forest, CA 92630

http://www.TeamAssociated.com · http://www.RC10.com · http://twitter.com/Team_Associated · http://bit.ly/AEonFacebook

Customer Service

Tel: [phone]

Fax: [phone]

3

:: Hardware - 1:1 Scale View

Flat Head (fhcs)

2.5x6mm (4675)

2.5x8mm (31448)

3x6mm (31541)

3x8mm (25201)

Titanium (91592)

3x10mm (25202)

Titaniuim (91593)

3x12mm (25203)
Titanium (91594)

3x14mm (89208)
Titanium (91595)

4x10mm (81262)

4x12mm (89214)

Button Head (bhcs)

2.5x6mm (31520)

2.5x8mm (31521)

2.5x18mm (81259)

3x6mm (31531)

Titanium (91580)

3x10mm (25211)

3x14mm (25187)
Titanium (91584)

3x16mm (89203)
Titanium (91585)

3x20mm (25188)

3x24mm (89204)
Titanium (91589)

4x14mm (81260)

Set Screws

3x3mm (25225)

3x6mm (81257)

3x10mm (4671)

3x12mm (81258)

4x4mm (7732)

5x4mm (89221)

Ball Bearings

5x8x2.5mm (89161)

5x10x4mm (91560)

6x10mm (31404)

4x14mm (89217)

4x16mm (81263)

4x20mm (81264)

Socket Head (shcs)

4x16mm (81261)

2x5mm (31511)

2x16mm (7184)

3x8mm (89223)

3x10mm (25620)

3x24mm (89225)

6x12x4mm (91561)

8x16x5mm (91564)

8x16x5mm flanged

(91565)

4

:: Table of Contents

1................... Cover

2................... Introduction

3................... 1:1 Hardware “Fold Out”

4................... Table of Contents

5 - 7..............Differentials Build

(Bag A, B, C)

7 - 8...........Steering / Chassis Build

(Bag D, E)

16 - 17.........Center Bulkhead/ Brakes Build

(Bag M, N)

17 - 18 .......Anti-Roll Bars Build (Bag O)

19 - 20........Shocks Build (Bag P, Q)

20 - 22.......Radio Tray Build (Bag R, S)

23 - 24.......Servo Horns / Linkage Build

(Bag T)

24 - 27........Engine / Tank Build (Bag U, V)

9 - 10...........Front Gearbox Build

(Bag F, G)

11 - 12.........Front Uprights Build

(Bag H, I)

12 - 14........Rear Gearbox Build

(Bag J, K)

15 - 16........Rear Uprights / Turnbuckles

Build (Bag L)

:: Notes

This symbol indicates a special
note or instruction in the manual.

!

28.................Wheel/Tire/Body Build

(Misc. Bag)

29.................Droop Settings

30 - 41....... Catalog

42................ Back Cover

This symbol indicates a Racers Tip.

There is a 1:1 hardware foldout page in the

front of the manual. To check the size of a part,
Scanning this QR code will take
you to Team Associated’s Tech Tips
videos. These videos will help you
with your build and setup!

Associated Electrics, Inc.

26021 Commercentre Dr.

Lake Forest, CA 92630

http://www.TeamAssociated.com · http://www.RC10.com · http://twitter.com/Team_Associated · http://bit.ly/AEonFacebook

line up your hardare with the correct drawing

until you find the exact size. Each part in the

foldout has a number assigned to it for ordering

replacement parts.

Customer Service

Tel: [phone]

Fax: [phone]

4/15

:: Differential Build (Front and Rear) - Bag A, B, C - Step 1

5

89115

Diff

Housing

91564

8x16x5
Bearing

89121

Diff O-Ring

Set

81008

Diff

Outdrives

Racer’s Tip:

Use black grease

(#6588) to

lube the O-Rings

before installation!

89120

Shims

Diff O-Ring

:: Differential Build (Front and Rear) - Bag A, B, C - Step 2

89120

Diff Sun

Gear

Diff

89121

Set

89120

Diff

Planet

Gears

x2

89120

Diff

Outdrive

Pin

!

Align pin with

groove in sun gear

:: Differential Build (Front and Rear) - Bag A, B, C - Step 3

81002

Diff Ring

Gear, 44T

91564
8x16x5
Bearing

89121

Diff O-Ring

Set

81008

Diff

Outdrives

Racer’s Tip:

Use black grease

(#6588) to

lube the O-Rings

before installation!

Diff O-Ring

89120

Diff

Shims

89121

Set

x2

89120

Diff

Outdrive

Pin

6

:: Differential Build (Front and Rear) - Bag A, B, C - Step 4

89116

89120

Diff Sun

Gear

!

Align pin with

groove in sun gear

:: Differential Build (Center) - Bag A, B, C - Step 5

Diff

Gasket

Racer’s Tip:
Use green slime
(#1105) to coat

the Diff Gasket

before installation!

Racer’s Tip:

Fill diff to the top of

the planet gear pins.

89208

x4

3x14mm

FHCS

Diff Fluid

Front Diff Fluid:

10,000cst #5455

Rear Diff Fluid:

7,000cst #5454

89115

Diff

Housing

91564
8x16x5
Bearing

89121

Diff O-Ring

Set

Racer’s Tip:

Use black grease

(#6588) to

lube the O-Rings

before installation!

81008

Diff

Outdrives

:: Differential Build (Center) - Bag A, B, C - Step 6

89120

Diff Sun

Gear

89120

x2

Diff

Shims

89121

Diff O-Ring

Set

89120

Diff

Planet

Gears

89120

Diff

Outdrive

Pin

:: Differential Build (Center) - Bag A, B, C - Step 7

89500

Light Spur

Gear, 46T

89120

Diff

Shims

x2

7

89120

Diff

Outdrive

Pin

91564

8x16x5

Bearing

89121

Diff O-Ring

Set

81008

Diff

Outdrives

Racer’s Tip:

Use black grease

(#6588) to

lube the O-Rings

before installation!

:: Differential Build (Center) - Bag A, B, C - Step 8

89116

Diff

Gasket

89120

Diff Sun

Gear

before installation!

89121

Diff O-Ring

Set

Racer’s Tip:
Use green slime
(#1105) to coat

the Diff Gasket

89208

3x14mm

FHCS

x4

Diff Fluid

:: Steering / Chassis Build - Bag D, E - Step 1

25201

3x8mm

FHCS

31541

3x6mm

FHCS

25201

3x8mm

FHCS

25201

3x8mm

FHCS

x2

x2

81001

Side

Guards

25201

3x8mm

FHCS

x2

31541

3x6mm

FHCS

81000
RC8B3

Chassis

25201

3x8mm

FHCS

x2

Racer’s Tip:

Fill diff to the top of

the planet gear pins.

81091

x2

Steering

Post

81262

x2

4x10mm

FHCS

Center Diff Fluid:
10,000cst #5455

#1596

thread lock

8

:: Steering / Chassis Build - Bag D, E - Step 2

81087

Servo
Saver

Tube

81086

Steering

Bellcrank

81086

Steering

Bellcrank

:: Steering / Chassis Build - Bag D, E - Step 3

Racer’s Tip:

Use black grease

(#6588) to lube

the bellcrank halves

before installation!

Servo Saver

Retainer

81087

Servo

Saver

Spring

81087

Spring

81087

Servo

Saver

Shim

31511

2x5mm

#1596

thread lock

x2

3mm

SHCS

!

Tighten 2x5mm SHCS snug.

Set servo saver tension to

3mm. Then tighten 2x5mm

SHCS to lock.

31404

x4

6x10x3mm

Bearing

81086

Steering

Bellcrank

89161

x4

5x8x2.5mm

Bearing

:: Steering / Chassis Build - Bag D, E - Step 4

81088

Steering

Bellcrank

Nut

x2

25211

3x10mm

BHCS

x2

#1596

thread lock

81089

Steering

Rack

81093

Turnbuckle

Ball, 4mm

Kit Setup:

1
2
3
4
5

x2

25201

3x8mm

FHCS

x2

#1596

thread lock

:: Front Gearbox Build - Bag F, G - Step 1

81015

Gearbox,

(Inboard)

Racer’s Tip:

Use black grease

(#6588) to
lube the Diff Pinion
before installation!

91561

6x12x4mm

Bearing

89221

5x4mm

Set Screw

9

x2

#1596

thread lock

81003

Diff Pinion

Gear, 13T

81015

Dust Cap

4675

2.5x6mm
FHCS

:: Front Gearbox Build - Bag F, G - Step 2

81015

Gearbox,

(Outboard)

81015

Anti-Roll

Bar Cap

81259

2.5x18mm
BHCS

25620

3x10mm

SHCS

Universal,

(76mm)

x2

81020

Center

89117

Diff Shim

x2

:: Front Gearbox Build - Bag F, G - Step 3

Kit Setup:

81046

Arm

Mount (B)

81050

Arm Mount

Insert,
Center

81260

4x14mm

BHCS

x2

x2

81060

Hinge

Pin

81054

Front Arm

Shim, 1mm

81054

Front Arm,

Lower

89317

Droop

Screw

!

Note that each arm is

marked with a R for the

Right Arm or an L for

the Left Arm.

10

81050

x2

:: Front Gearbox Build - Bag F, G - Step 4

Kit Setup:

81260

4x14mm

BHCS

x2

81045

Arm Mount

(A)

81050

Arm Mount

Insert,

Middle Down

:: Front Gearbox Build - Bag F, G - Step 5

Kit Setup:

81049

Upper Link

Mount

25201

3x8mm

FHCS

x2

#1596

thread lock

81050

Arm Mount

Insert,
Center

x2

x2

89214

4x12mm

FHCS

81196

Bushing

Shock

89214

4x12mm

89216

Locknut

x2

x2

FHCS

M4

89225

3x24mm

SHCS

81112

Body Post,

Front

81030

Top Plate

25201

3x8mm

FHCS

81032

Chassis

Brace,

Front

Kit Setup:

x2

#1596

thread lock

:: Front Gearbox Build - Bag F, G - Step 6

Caster

Clips

1mm 2mm

89214

4x12mm

FHCS

x4

81055

Caster

Clip, 2mm

Hinge Pin,

Front Upper

81060

81055

Front

Upper Arms

81026

Shock Tower,

Front

81055

Caster

Clip, 1mm

x2

81050

Arm Mount

Insert,
Center

x2

!

Note that each arm is

marked with a R for the

Right Arm or an L for

the Left Arm.

:: Front Uprights Build - Bag H, I - Step 1

81065

Steering

Block

11

89096

Wheel

Hex Pin

81019
Universal,
(93.5mm)

91565

8x16x5mm

Bearing,

Flanged

x2

:: Front Uprights Build - Bag H, I - Step 2

81067

Pillow

Ball, Steel

!

Tighten pillow ball nut

(#81070) until pillow ball

(#81067) begins to bind,

then loosen until pillow ball

moves freely.

81065

Pillow

Ball Cap

x2

x2

25225

3x3mm

Set Screw

25211

3x10mm

BHCS

#1596

thread lock

Block Arm

81070
Pillow

Ball Nut,

Aluminum

81066

Steering

x2

81081

Hex Drive,

17mm

(Blue)

25202

3x10mm

FHCS

81093

Turnbuckle

Ball, 4mm

#1596

thread lock

89221

5x4mm

Set Screw

x2

:: Front Uprights Build - Bag H, I - Step 3

81072

Pillow

Ball Shim

(2 degree)

Ball Shim

(0.5 degree)

81056

Suspension

Arm

Endcap

x2

81072

Pillow

Pillow Ball Shims

0.5° 1°

2°

(#81072) to adjust camber.

!

Use Pillow Ball Shims

12

#1596

thread lock

:: Front Uprights Build - Bag H, I - Step 4

81262

4x10mm

FHCS

89216

M4

Locknut

x2

#1596

thread lock

81113

Front

Bumper

89214

4x12mm

FHCS

:: Rear Gearbox Build - Bag J, K - Step 1

81015

Gearbox,

(Inboard)

Racer’s Tip:

Use black grease

(#6588) to

lube the Diff Pinion

before installation!

81003

Diff Pinion

Gear, 13T

81015

Dust Cap

4675

2.5x6mm
FHCS

81264

4x20mm

FHCS

4x12mm

91561

6x12x4mm

Bearing

81021
Center

Universal,

(106mm)

x2

89214

FHCS

x2

x2

89221

5x4mm

Set Screw

#1596

thread lock

:: Rear Gearbox Build - Bag J, K - Step 2

81015

Gearbox,

(Outboard)

81259

2.5x18mm
BHCS

81015

Anti-Roll

Bar Cap

25620

3x10mm

SHCS

x2

89117

Diff Shim

x2

:: Rear Gearbox Build - Bag J, K - Step 3

13

Kit Setup:

81047

Arm

Mount (C)

x2

31531

3x6mm

BHCS

81260

4x14mm

BHCS

81050

Arm Mount

Insert,
Center

x2

:: Rear Gearbox Build - Bag J, K - Step 4

81058

Rear Arm

Shim

81059

Rear Arm

Mud Guard

x2

81048

Arm

Mount

(D)

81058

Rear Arm

Note that each arm is

marked with a R for the

Right Arm or an L for

!

the Left Arm.

89317

Droop

Screw

Kit Setup:

81060

Hinge

Pin

:: Rear Gearbox Build - Bag J, K - Step 5

25188

3x20mm

BHCS

81032

Chassis

Brace,

Rear

81260

4x14mm

BHCS

81032

Chassis

Brace

Mount

25215

M3

Locknut

x2

81050

Arm Mount

Insert,
Center

x2

4x12mm

89214

FHCS

x2

14

:: Rear Gearbox Build - Bag J, K - Step 6

81027

Shock

Kit Setup:

4

3

2

1

5

81112

Body
Post,
Rear

Tower,

Rear

25211

3x10mm

BHCS

x2

25203

3x12mm

FHCS

#1596

thread lock

81196

Shock

Bushing

x2

3 6
2 5
1 4

81094

Upper Link

Mount

x2

:: Rear Gearbox Build - Bag J, K - Step 7

25203

3x12mm

FHCS

81108

Wing

Mount,

High

x2

81106

Wing

Mount

Button

25215

M3

Locknut

x2

x2

3x24mm

81106

Wing

2308

3x18mm

BHCS

89225

SHCS

x2

x2

#1596

thread lock

25215

M3

Locknut

x2

:: Rear Gearbox Build - Bag J, K - Step 8

81263

4x16mm

FHCS

x2

89214

4x12mm

FHCS

x2

:: Rear Uprights / Turnbuckles Build - Bag K, L - Step 1

15

91565

x2

8x16x5mm

Bearing,

Hex Pin

Flanged

81075

Rear Hub

81018
Universal,
(90.5mm)

25225

3x3mm

Set Screw

:: Rear Uprights / Turnbuckles Build - Bag K, L - Step 2

Kit Setup:
Mount the rear hub to the rear
arm in the lower hole.

Kit Setup:

81094

Rod End,

5mm

89096

Wheel

81081

Hex Drive,

17mm

(Blue)

89269

Steel

Turnbuckle,

38mm

89221

5x4mm

Set Screw

#1596

thread lock

81094

Rod End,

5mm

81075

Rear Hub

Shim, 2.5mm

81076

Hub Hinge

Pin

25215

M3

Locknut

81075

Rear Hub

Shim, 1.0mm

81075

Rear Hub

Shim, 1.5mm

:: Rear Uprights / Turnbuckles Build - Bag K, L - Step 3

Kit Setup:
Mount the rear camber link in
the outside hole on the rear hub.

Kit Setup:

89216

Locknut

89204

3x24mm

BHCS

Rear Hub Turnbuckle

14.50mm (0.57”)

M4

81264

4x20mm

FHCS

25215

M3

Locknut

89214

4x12mm

FHCS

x3

16

:: Rear Uprights / Turnbuckles Build - Bag K, L - Step 4

81093

Rod End,

4mm

:: Center Bulkhead / Brakes Build - Bag M, N- Step 1

!

Align slotted holes on the same side

when installing brake pads.

89526

4x50mm

Turnbuckle

Rod End,

Steering Turnbuckle

26.40mm (1.04”)

81093

4mm

81036

Center

Bulkhead

Narrow

81038

Brake

Pad

Spring

89149

Brake

Bolt

x2

Build x2 Build x2

x2

81039

Brake Pad

81037

Brake

Rotor

31448

2.5x8mm
FHCS

x2

:: Center Bulkhead / Brakes Build - Bag M, N- Step 2

81043
Center

Top Plate

81256

C-Clip,

5mm

x2

81036

Rotor

Guide,

Narrow

Wide

Wide Rotor Guide

used for optional

brake rotors.

81040

Brake

Cam

x2

:: Center Bulkhead / Brakes Build - Bag M, N- Step 3

x2

4671

3x10mm

Set Screw,

front

25225

3x3mm

Set Screw,

rear

#1596

thread lock

81042

Brake

Lever

:: Center Bulkhead / Brakes Build - Bag M, N- Step 4

17

Center brake levers

between the brake cams.

!

89214

4x12mm

FHCS

x4

Towards
Front of

Vehicle

:: Anti-Roll Bars Build - Bag 0 - Step 1

81150

Anti-Roll

Bar Rod

End

x2

81150

Anti-Roll

Bar Pivot

89203

3x16mm

BHCS

x2

89214

4x12mm

FHCS

!

x4

Steering Turnbuckles

removed

for view clarity.

81258

3x12mm

Set Screw

81150

Rod End

Ball

!

Left Side Right Side

Anti-Roll Bar Pivots:

Tighten the Anti-Roll Bar
Rod Ends completely, then
offset the Anti-Roll bar rod

ends as seen above

(approximately 45 degrees).

18

:: Anti-Roll Bars Build - Bag 0 - Step 2

81130

(Front) Anti-Roll

!

Center the Anti-Roll

Bar Collet on the

Anti-Roll Bar, then

tighten the (#25225)

3x3mm set screw.

#1596

thread lock

Bar, Green

81140

(Rear) Anti-Roll

Bar, Blue

81150

Anti-Roll

Bar

Collet

25225

3x3mm

Set Screw

:: Anti-Roll Bars Build - Bag 0 - Step 3

#1596

thread lock

25225

3x3mm

Set Screw

31521

2.5x8mm
BHCS

!

x2

x2

81257

3x6mm

Set Screw

Tighten #81257 set screws

just enough to still allow the

anti-roll bar to move freely.

x2

Build front

and rear

Anti-Roll Bars

#1596

thread lock

89203

3x16mm

BHCS

!

x2

Rear Hub Turnbuckles

removed for view clarity.

:: Anti-Roll Bars Build - Bag 0 - Step 4

Rear Hub Turnbuckles

removed for view clarity.

25225

3x3mm

Set Screw

31521

2.5x8mm
BHCS

!!

#1596

thread lock

x2

x2

81257

3x6mm

Set Screw

Tighten #81257 set screws

just enough to still allow the

anti-roll bar to move freely.

#1596

thread lock

x2

:: Shocks Build - Bag P, Q - Step 1

89215

Shock

81200

Shock

Piston

(6x1.3

flat)

Piston

Locknut

89278

2.5mm

Washer

81170

Shock Shaft,

30.5mm
(Front)

x2

81185

Shock Body

O-Ring

81185

O-Ring Hat

Bushing

81160

Shock Body,

30.5mm
(Front)

81161

Shock Body,

39.5mm
(Rear)

81186

Shock

O-Ring

x2

19

Racer’s Tip:

Use shock fluid

or green slime

(#1105) to

lube the O-Rings

before installation!

81190

Shock

Boots

81171

Shock Shaft,

39.5mm
(Rear)

81188

Shock Body

Seal

Retainer

:: Shocks Build - Bag P, Q - Step 2

81181

Shock Cap

Insert

81180

Shock Cap

81182

Shock

Bladder

81185

O-Ring

Spacer

!

When installing the

shock bladder, make

sure it is correctly

seated within the

shock cap as shown.

81193

Shock
Rod End
and Ball

shock

fluid

Front Shock Fluid:

37.5wt #5433

Rear Shock Fluid:

30wt #5422

:: Shocks Build - Bag P, Q - Step 3

!

Leave a gap when

installing the shock cap.

Let shock fluid bleed from cap, then

For less rebound, compress shock
shaft farther before tightening the

!

Compress shock shaft half way.

tighten cap.

shock cap.

For more rebound, do not

compress shock shaft as far

before tightening the shock cap.

!

Some residual shock

fluid may appear from

your first few runs

around the shock cap

as a result of bleeding.

20

:: Shocks Build - Bag P, Q - Step 4

!

The shock springs
come with colored
heat shrink tubing.
Install them on the

springs for easy

identification.

:: Shocks Build - Bag P, Q - Step 5

shock

fluid

Kit Setup:
Mount the front shock in the
outside hole on the front arm.

81185

Shock Spring

Collar O-Ring

81183

Shock Spring

Collar

81214

Front Spring,

Blue (5.0lb/in)

81219

Rear Spring,

Blue (4.3lb/in)

81193
Spring

Cup

Kit Setup:
Mount the rear shock in the
outside hole on the rear arm.

25612

M3 Locknut

W/ Flange

81197

Shock

Pin

Set Screw

:: Radio Tray Build - Bag R, S - Step 1

31448

2.5x8mm
FHCS

x4

81102

Radio

Tray Post

81257

3x6mm

81100

Radio

Tray

x4

25612

M3 Locknut

W/ Flange

81197

Shock

Pin

9907

Receiver

Box

Grommet

x2

81257

3x6mm

Set Screw

9907

Grommet

Plug

x2

81102

Receiver

Box

:: Radio Tray Build - Bag R, S - Step 2

25201

3x8mm

FHCS

x2

31448

2.5x8mm
FHCS

89218
3x8mm
Washer

89023

Servo

Spacer

81102

Transponder

Mount

:: Radio Tray Build - Bag R, S - Step 3

25187

3x14mm

BHCS

x4

x2

x4

Servo not

included!

When spacing your

servos, make sure the

servo does not touch

the chassis when

installed.

!

25187

3x14mm

BHCS

89218
3x8mm
Washer

89023

Servo

Spacer

x4

21

x4

Servo not

included!

x2

31531

x3

3x6mm

BHCS

Transponder

not included!

:: Radio Tray Build - Bag R, S - Step 4

6727

Servo

Tape

Receiver Battery

not included!

25201

3x8mm

FHCS

81103

Receiver

Battery

Tray

x2

Racer’s Tip:

Use strapping tape

for extra security for

battery installation!

Strapping Tape

not included!

22

:: Radio Tray Build - Bag R, S - Step 5

6338

Antenna

Tube and

Cap

Receiver

not included!

6727
Servo

Tape

:: Radio Tray Build - Bag R, S - Step 6

25225

3x3mm

Set Screw

81102

Receiver

Box Lid

!

When using a receiver
switch, you will need to

carefully remove

material from the

receiver box lid in the

highlighted sections

below in order to

mount your switch.

31448

2.5x8mm
FHCS

x6

89214

4x12mm

FHCS

x5

:: Servo Horns / Linkage Build - Bag T - Step 1

the servo horn pivots.

89078

Servo Link

Rod End

89267

32mm Steel

Turnbuckle

81250

Servo Horn

(Steering)

and Cone

Washer

23

25215

M3

Locknut

89078

Servo

Link Rod

End

Servo Horn Insert

Steering Servo Turnbuckle

8.25mm (0.32”)

Printed here

A - Airtronics
F - Futaba
H - Hitec
J - JR/KO

:: Servo Horns / Linkage Build - Bag T - Step 2

25201

3x8mm

FHCS

#1596

thread lock

89203

3x16mm

BHCS

Horn Pivot

Racer’s Tip:

Center servo

before horn

installation!

7184

2x16mm

SHCS

81251

Servo

81251

Pivot

Bushing,

Brake

81250

Servo Horn,

Throttle

Servo Horn,

Large Ring

81250

x3

81250

81250
Servo Horn
Large Ring

81250

Cone

Washer

81251

2x10mm

SHCS

81251

Washer

81251

Pivot

Bushing,

Throttle

81250

Servo Horn

Insert

4617

2mm Shim

25188

3x20mm

BHCS

x3

Printed here

A - Airtronics
F - Futaba
H - Hitec
J - JR/KO

:: Servo Horns / Linkage Build - Bag T - Step 3

#1596

thread lock

81251

Brake

Link

x3

81251

Brake Bias

Collar

81251

Throttle

Spring

81251

Set Collar

81251

Throttle

Ball Cup

x3

Set Screw

25225

3x3mm

!

Install Brake Links so they

are flush with the back of

the servo horn pivots.

x4

24

:: Servo Horns / Linkage Build - Bag T - Step 4

81251

Brake Linkage

Spring Ball

8433

.024

Spring

x2

x2

25201

3x8mm

FHCS

#1596

thread lock

81251

Set Collar

#1596

thread lock

25225

3x3mm

Set Screw

:: Engine / Tank Build - Bag U, V - Step 1

3719

6” Nylon

Wire Tie

x2

x2

x2

Racer’s Tip:

Center servo

before horn

installation!

81120

Fuel Tank

Clip

81120

Fuel Tank

x2

25211

3x10mm

BHCS

81122

Fuel Tank

Post

x2

x2

31520

2.5x6mm
BHCS

89218

3x8mm

Washer

81262

4x10mm

FHCS

x2

x2

x2

7725

Fuel

Tubing

(22mm long)

:: Engine / Tank Build - Bag U, V - Step 2

81124

Air Filter

81124

81124

Air Filter

Boot

Air Filter

foam

Cap

treatment
#7710

foam

treatment
#7710

3719

Nylon Wire

Tie, 6”

81125

Air Filter

Element

25620

3x10mm

SHCS

When oiling the filter

elements, place both inside

a plastic bag and squeeze to

help evenly coat the filter.

:: Engine / Tank Build - Bag U, V - Step 3

Racer’s Tip:

89136

Flywheel

(Hard

Anodized)

89137

Clutch

Shoe Shim

89133

Clutch

Spring, 1.0

Trim clutch shim as shown.

x3

89134

Clutch

Shoe

x3

#1596

thread lock

89138

Flywheel

Collet

2313

SG Crank

Clutch Nut

3719

Nylon Wire

Tie, 6”

!

Engine

not included!

Clutch shimming instructions:

If assembly does not spin freely, use

#89148 (small clutch shim included in

kit) on screw to increase end play.

If crankcase extends past clutch

bearing, use#89218 (large clutch

shim included in kit) to reduce end play.

91560

5x10x4mm

Bearing

89148

Clutch

Shims

89223

3x8mm

SHCS

x2

x6

25

89376

Clutch

Bell, 13T

89218
3x8mm
Washer

:: Engine / Tank Build - Bag U, V - Step 4

25620

3x10mm

SHCS

81115

Engine

Mount

x4

x2

#1596

thread lock

Exhaust spring not

included!

Exhaust Pipe

not included!

Header pipe

not included!

Header pipe gaskets

not included!

26

:: Engine / Tank Build - Bag U, V - Step 5

31531

3x6mm

BHCS

81124

Air Filter

Mount

:: Engine / Tank Build - Bag U, V - Step 6

When installing your engine,

make sure the rear drive

shaft does not interfere

!

with the engine mount.
You may need to remove
material from the engine

mount for fitment.

#1596

thread lock

89218
3x8mm
Washer

#1596

thread lock

#1596

thread lock

7732

4x4mm

Set Screw

81118

Pipe

Mount

81262

4x10mm

FHCS

81114
Engine

Mount

Washer

x4

#1596

thread lock

81262

4x10mm

FHCS

x4

:: Engine / Tank Build - Bag U, V - Step 7

2208

Large

Hood Pin

:: Engine / Tank Build - Bag U, V - Step 8

27

#1596

thread lock

Exhaust Set Screw

not included!

Pressure line from

fuel tank lid to

exhaust pipe

Fuel line from fuel

tank to carburetor

28

89296

RC8 Wheels,

white, 83mm

Wheels, Tires, and Foam

with the serrated edge

towards the wheel.

with the serrated edge

towards the wheel.

:: Wheels / Tires / Body - Misc. - Step 1

Wheels, Tires, and Foam

Inserts Not Included!

!

RC8 Wheels,

white, 83mm

:: Wheels / Tires / Body - Misc. - Step 2

Install wheel nuts (#81082)

with the serrated edge

towards the wheel.

89296

#1597

CA tire glue

!

Build four

wheels/

tires

Tires:

When gluing tires to wheels, use a fast-curing
tire glue (CA) (AE #1597). This is available at
your local hobby shop. Make sure to clean the
mounting surface of the tire and wheel with
alchohol for best adhesion.

!!

Install wheel nuts (#81082)

with the serrated edge

towards the wheel.

81082

Wheel Nuts,

17mm

(Blue)

:: Wheels / Tires / Body - Misc. - Step 3

81082

Wheel Nuts,

17mm

(Blue)

Painting Tips:

Your RC8B3 Kit comes with a clear
polycarbonate body. You will need to prep
the body before you can paint it. Wash the
inside thoroughly with warm water and liquid
detergent. Dry the body using a clean, soft,
lint-free cloth. Install the window masks on
the inside of the body. (RC cars get painted
from the inside). Using high quality masking
tape, apply tape to the inside of the body to
create a design. Spray (either rattle can or
airbrush R/C specific paint) the paint to the
inside of the body (prefferably dark colors
first, lighter colors last).

NOTE: use ONLY paint that is recommended
for use with (polycarbonate) plastics. If you
do not, you can destroy the polycarbonate
body!!!

After painting, cut the body along the trim
lines. Make sure to drill or use a body reamer
to make the holes for the body mounts and
antenna!

:: Droop Settings

Set droop by measuring overall length of shock (from standoff to shock pin) while the chassis is elevated above your
working surface. The shocks should be fully extended.
Kit setup for front droop is 104mm shock length, and 124mm shock length for the rear.
If the shock length is too long, adjust by turning the droop screws clockwise.
If the shock length is too short, adjust by turning the droop screws counter-clockwise.

29

Front Droop: Increasing front droop (loosen droop screws) will increase off-throttle steering. It also allows the

front end to lift more, giving more rear grip and less front grip on-power. Remember to never loosen the screws beyond
the FULL DROOP setting. Decreasing front droop (tighten droop screws) yields more on-power steering and quicker
response at the expense of some stability in bumpy sections. It will also give less off-throttle steering.

Rear Droop: Increasing rear droop (loosen droop screws) will increase traction in bumpy sections, but will reduce

high-speed stability. Remember to never loosen the screws beyond the FULL DROOP setting. Decreasing rear droop
(tighten droop screws) will increase stability in high speed sections, but will reduce stability in bumpy sections.

Setup Sheets:

Most often the best way to get your car handling right is to go to our website www.rc10.com and click on the
“Setup Sheets” link, then the link to your vehicle, then search for your vehicle. Our team of professional drivers help
develop these setups at National events. Also, most drivers have a “base” setup that they use as a starting point for ev­ery event. Try running some of our base setups OR look for track conditions and tires that are similar to your local track
and mimic that setup. Remember, each adjustment has a purpose, so copy everything from the setup sheet and then
make adjustments based on the recommendations in here at http://www.rc10.com/rc/tuning.

30

:: Shocks

81156
81157
81160
81161
81170
81171
81180
81181
81182
81183
81185
81186
81188
81190
81193
81200

89215
89278

RC8B3 Shock Kit (Front)
RC8B3 Shock Kit (Rear)
RC8B3 Shock Body, 30.5mm
RC8B3 Shock Body, 39.5mm
RC8B3 Shock Shaft, 30.5mm
RC8B3 Shock Shaft, 39.5mm
RC8B3 Shock Cap
RC8B3 Shock Cap Insert
RC8B3 Shock Bladder
RC8B3 Spring Collar
RC8B3 Shock Rebuild Kit
RC8B3 Shock O-Ring
RC8B3 Shock Body Seal Retainer
RC8B3 Shock Boots
RC8B3 Shock Rod End & Spring Cup
RC8B3 Shock Pistons
(6x1.3 - KIT, 6x1.3 T, 8x1.2 T)
Shock Piston Locknut
Washer, 2.5mm

89215

89278

81200

1
1
2
2
2
2
2
2
2
2
2
8
2
4
2

2 ea.

10
20

:: Shock Fluid

5420
5421
5422
5423
5424
5425
5426
5427
5428
5429
5430
5431
5432
5433
5434
5435
5436
5437
5438

10 Weight Silicone Shock Fluid
20 Weight Silicone Shock Fluid
30 Weight Silicone Shock Fluid
40 Weight Silicone Shock Fluid

22.5 Weight Silicone Shock Fluid
80 Weight Silicone Shock Fluid

27.5 Weight Silicone Shock Fluid
15 Weight Silicone Shock Fluid
25 Weight Silicone Shock Fluid
35 Weight Silicone Shock Fluid
45 Weight Silicone Shock Fluid
55 Weight Silicone Shock Fluid

32.5 Weight Silicone Shock Fluid

37.5 Weight Silicone Shock Fluid

42.5 Weight Silicone Shock Fluid
50 Weight Silicone Shock Fluid
60 Weight Silicone Shock Fluid
70 Weight Silicone Shock Fluid

47.5 Weight Silicone Shock Fluid

81181

81180

2oz.
2oz.
2oz.
2oz.
2oz.
2oz.
2oz.
2oz.
2oz.
2oz.
2oz.
2oz.
2oz.
2oz.
2oz.
2oz.
2oz.
2oz.
2oz.

81185

89278

Front:

81170

Rear:

81171

81190

81193

81182

Front:

81160

Rear:

81161

81185

81185

89066

81185

89066

81188

81183

Kit Front:

81214

Kit Rear:

81219

81193

81193

:: Springs

81213
81214
81215
81218
81219
81220

RC8B3 Front Spring, 4.7lb/in, Gray
RC8B3 Front Spring, 5.0lb/in, Blue - KIT
RC8B3 Front Spring, 5.4lb/in, Yellow
RC8B3 Rear Spring, 4.1lb/in, Gray
RC8B3 Rear Spring, 4.3lb/in, Blue - KIT
RC8B3 Rear Spring, 4.6lb/in, Yellow

Pr.
Pr.
Pr.
Pr.
Pr.
Pr.

31

:: Front / Rear Gear Differential

81002
81008
89115
89116
89117
89120

89121
89208
91564

RC8B3 Diff Ring Gear, 44T
RC8B3 Diff Outdrives
Diff Housing
Diff Gasket
Diff Shims
Diff Sun/Planet Gears, Includes
Washers and Pins, Set
Diff 0-Rings, Big and Small, Set
3 x 14mm FHCS
8 x 16 x 5 Bearings

:: Center Gear Differential

1

81008

2

89115

1

89116

4

89120
8
1

89121

89208
1

10

89500

91564
2

81008

89120 89120

89120

89121

89117

91564

89121

89115

91564

89208

81002

89117

89121

89116

89121

81008

89120

RC8B3 Diff Outdrives
Diff Housing
Diff Gasket
Diff Sun/Planet Gears, Includes
Washers and Pins, Set
Diff 0-Rings, Big and Small, Set
3 x 14mm FHCS
Light Spur Gear 46T, Includes Diff Gasket
8 x 16 x 5 Bearings

81008

89120

89121

91564

89121

89208

89115

89500

91564

89121

89116

89121

81008

89120

2
1
4
1

1

10

1
2

:: Center Bulkhead

4671
25225
31448
31531
81036
81037
81038
81039
81040
81042
81043
81124
81256
89149
89214
89218

3 x 10mm Set Screw
3 x 3mm Set Screw

2.5 x 8mm FHCS
3 x 6mm BHCS
RC8B3 Center Bulkhead, 2 wide, 2 narrow
RC8B3 Brake Rotor
RC8B3 Brake Pad Spring - KIT
RC8B3 Brake Pad, 2 inside, 2 outside, 4 springs
RC8B3 Brake Cam
RC8B3 Brake Lever
RC8B3 Center Top Plate
RC8B3 Air Filter, Boot, and Mount
C-Clip, 5mm
Brake Bolt
4 x 12mm FHCS
3 x 8mm Washer

81038

81037

6

20

6
6
1
2
4
1
2
2
1
1
6

4
10
10

81039

81036

81036

31531

89218

81124

89214

4671

81042

89214

25225

81042

81043

81256

89149

81039

89214

31448

81040

81040

32

:: Front Gearbox

4675
25620
31521
81003
81015
81020
81045
81046
81050
81054
81060
81113
81257
81259
81260
81261
81264
89214
89221
91561

2.5 x 6mm FHCS
3 x 10mm SHCS

2.5 x 8mm BHCS
RC8B3 Diff Pinion Gear, 13T
RC8B3 Gearbox
RC8B3 Center Universal, 76mm
RC8B3 Arm Mount, A
RC8B3 Arm Mount, B
RC8B3 Arm Mount Insert
RC8B3 Front Arms
RC8B3 Hinge Pin Set
RC8B3 Front Bumper
3 x 6mm Set Screw

2.5 x 18mm BHCS
4 x 14mm BHCS
4 x 16mm BHCS
4 x 20mm FHCS
4 x 12mm FHCS
5 x 4mm Set Screw
Bearing, 6 x 12 x 4mm

6

20

6
1
2
1
1
1

12 ea.

Pr.

1
1
6
6
6
6

6
10
10

2

31521

81015

81257

25620

81259

81260

81003

81050

81045

91561

81113

81264

4675

81015

81060

81015

81054

81050

89221

89214

81050

81060

91561

81046

81054

81020

81261

81050

:: Rear Gearbox

4675
25620
81003
81015
81047
81048
81050
81058
81060
81257
81259
81261
81264
89214
89221
91561

2.5 x 6mm FHCS
3 x 10mm SHCS
RC8B3 Diff Pinion Gear, 13T
RC8B3 Gearbox
RC8B3 Arm Mount, C
RC8B3 Arm Mount, D
RC8B3 Arm Mount Insert
RC8B3 Rear Arm
RC8B3 Hinge Pin Set
3 x 6mm Set Screw

2.5 x 18mm BHCS
4 x 16mm BHCS
4 x 20mm FHCS
4 x 12mm FHCS
5 x 4mm Set Screw
Bearing, 6 x 12 x 4mm

6

20

1
2
1
1

12 ea.

Pr.

1
6
6
6

6
10
10

2

91561

81021

89221

89214

81050

81047

91561

81015

81015

81003

81058

81259

25620

81264

81060

81048

81050

31521

81257

81015

81015

4675

81261

81050

81060

81261

81058

81050

:: Steering

25201
25211
31404
31511
81086
81087
81088
81089
81091
81093

81262
89161

3 x 8mm FHCS
3 x 10mm BHCS
Bearing, 6 x 10 x 3mm
2 x 5mm SHCS
RC8B3 Steering Bellcrank
RC8B3 Servo Saver Tube
RC8B3 Steering Bellcrank Nut
RC8B3 Steering Rack
RC8B3 Steering Post
RC8B3 Rod End, 4mm
(4 ball joints, 2 rod ends, 2 offset rod ends)
4 x 10mm FHCS
FT Steering Bearing Set,
5 x 8 x 2.5mm & 6 x 10 x 3mm

20
20

2
6
1
1
2
1
2
1

6

4 ea.

81088

89161

81086

31404

81087

81087

89161

81088

33

81087

81087

81087

31511

31404

:: Front Shock Tower

25612
81026
81050
81196
89214
89225

M3 Locknut with Flange, Black
RC8B3 Shock Tower, Front
RC8B3 Arm Mount Inserts
RC8B3 Shock Bushing
4 x 12mm FHCS
3 x 24mm SHCS

25211

81089

81093

25201

20

1

12 ea.

4
10
10

89161

81086

25211

81093

:: Rear Shock Tower

2208
25203
25211
25612
81027
81112
81196
89214
89225

Large Hood Pins
3 x 12mm FHCS
3 x 10mm BHCS
M3 Locknut with Flange, Black
RC8B3 Shock Tower, Rear
RC8B3 Body Post
RC8B3 Shock Bushing
4 x 12mm FHCS
3 x 24mm SHCS

31404

81091

81086

31404

81091

81262

81262

6
20
20
20

1
Pr.

4
10
10

25612

81196

81026

89214

89225

81050

89225

2208

81112

81196

81027

25612

25211

89214

25203

25211

34

:: Front Suspension

25202
25211
25225
81019
81054
81055
81056
81060
81065
81066
81067
81070
81072
81081
81082
81093

81197
81257
89096
89203
89221
89317
89526
91565

3 x 10mm FHCS
3 x 10mm BHCS
3 x 3mm Set Screw
RC8B3 Universal, 93.5mm
RC8B3 Front Arms
RC8B3 Front Upper Arms
RC8B3 Suspension Arm Endcap
RC8B3 Hinge Pin Set
RC8B3 Steering Block
RC8B3 Steering Block Arm
RC8B3 Pillow Ball
RC8B3 Pillow Ball Nut
RC8B3 Pillow Ball Shim
RC8B3 Hex Drives, 17mm Blue
RC8B3 Wheel Nuts, 17mm Blue
RC8B3 Rod End, 4mm (4 ball joints,
2 rod ends, 2 offset rod ends)
RC8B3 Shock Pin
3 x 6mm Set Screw
Wheel Hex Pin
3 x 16mm BHCS
5 x 4mm Set Screw
Droop Screw
4 x 50mm Turnbuckle
8 x 16 x 5 Flanged Bearing

20
20
20

2
Pr.
Pr.

4

1
Pr.

2

2

4

6

2

2

1

4

6

4
10
10

8

2

4

81055

81060

81054

81055

81019

81257

81072

81056

81067

89203

81093

81067

91565

89526

25211

25202

81066

81093

81065

81070

91565

89096

:: Rear Suspension

25215
25225
31531
81018
81058
81059
81075
81076
81081
81082
81094

81197
81257
89096
89203
89204
89221
89269
89317
91565

M3 Locknut, Black
3 x 3mm Set Screw
3 x 6mm BHCS
RC8B3 Universal, 90.5mm
RC8B3 Rear Arm
RC8B3 Rear Arm Mud Guard
RC8B3 Rear Hub
RC8B3 Hub Hinge Pin
RC8B3 Hex Drives, 17mm Blue
RC8B3 Wheel Nuts, 17mm Blue
RC8B3 Rod End, 5mm (4 ball joints,
2 rod ends, 2 offset rod ends)
RC8B3 Shock Pin
3 x 6mm Set Screw
Wheel Hex Pin
3 x 16mm BHCS
3 x 24mm BHCS
5 x 4mm Set Screw
Steel Turnbuckle, 38mm
Droop Screw
8 x 16 x 5 Flanged Bearing

81197

20
20

6

2
Pr.
Pr.
Pr.

2

2

2

1

4

6

4
10
10
10

2

8

4

81059

89317

81018

89317

91565

81058

81056

81094

25215

25225

81257

81065

89269

25225

81094

91565

81070

81075

81197

81082

89221

81081

89204

89096

81081

89221

81082

81076

31531

31531

89203

25215

81075

:: Radio Tray

6338

9907
25187
25201
25225
31448
31531
81100
81102
81103
89023
89214
89218

Antenna Tube with Cap, Black
Receiver Box Grommets
3 x 14mm BHCS
3 x 8mm FHCS
3 x 3mm Set Screw

2.5 x 8mm FHCS
3 x 6mm BHCS
RC8B3 Radio Tray
RC8B3 Receiver Box
RC8B3 Receiver Battery Tray
Servo Mount Spacers
4 x 12mm FHCS
3 x 8mm Washer

1

2 ea.

20
20
20

6
6
1
1
1

1
10
10

25187

89218

25201

89023

89218

31448

25201

89023

35

25187

31448

25201

25225

6338

6338

:: Linkage

4617
8427
8429
8431

8433
25188
25201
25215
25225
81250
81251
89078
89203
89267

Front Bulkhead Shims
.018” Spring
.020” Spring
.022” Spring
.024” Spring - KIT
3 x 20mm BHCS
3 x 8mm FHCS
M3 Locknut, Black
3 x 3mm Set Screw
RC8B3 Servo Horns
RC8B3 Linkage Set
Servo Link Rod Set
3 x 16mm BHCS
Steel Turnbuckle, 32mm

31448

31448

81102

81102

89203

31448

89214

4 ea.

2
2
2

2
20
20
20
20

1

1

1
10

1

25215

81250

4617

81250

89078

89078

81102

25201

25188

9907

9907

81251

25201

81250

81100

31531

81102

25225

25225

81251

25225

81102

89214

81250

81251

81103

81102

89214

81102

89214

81251

25225

81251

81251

81251

8433

89078

89078

89267

81251

8433

25225

81251

25225

81251

36

:: Front Chassis Brace

2208
25201
81030
81032
81049
81050
81112
81262
89214
89216

Large Hood Pins
3 x 8mm FHCS
RC8B3 Top Plate
RC8B3 Chassis Brace
RC8B3 Upper Link Mount
RC8B3 Arm Mount Insert
RC8B3 Body Post
4 x 10mm FHCS
4 x 12mm FHCS
M4 Locknut

2208

81112

25201

89214

25201

81049

89214

81030

81262

81032

89216

89214

6

20

1

Pr.

1

12 ea.

Pr.

6
10
10

:: Rear Chassis Brace

25188
25215
81032
89214
89216

3 x 20mm BHCS
M3 Locknut, Black
RC8B3 Chassis Brace
4 x 12mm FHCS
M4 Locknut

25188

81032

89216

89214

20
20
Pr.
10
10

89214

81032
25215

81050

:: Chassis

7732
25201
25620
31541
81000
81001
81114
81115
81118
81262

4 x 4mm Set Screw
3 x 8mm FHCS
3 x 10mm SHCS
3 x 6mm FHCS
RC8B3 Chassis
RC8B3 Side Guards
RC8B3 Engine Mount Washers
RC8B3 Engine Mount
RC8B3 Pipe Mount
4 x 10mm FHCS

25620

89216

25620

6
20
20

6

1

Pr.

4

Pr.

1

6

25201

81001

25201

31541

31541

81115

81114

81262

81114

81262

81000

7732

81118

81262

81118

25201

81001

31541

25201

:: Clutch

2313
89133
89134
89136
89137
89138
89148
89218
89223
89376
91560

SG Crank Clutch Nut
Clutch Spring, 1.0
Clutch Shoe with Shim
FT Flywheel (hard anodized)
Clutch Shoe Shim
Flywheel Collet
Clutch Bell Shim Set
3 x 8mm Washer
3 x 8mm SHCS
Clutch Bell, 13T - KIT
5 x 10 x 4mm Bearing

1
3
3
1
4
1

1
10
10

1

2

89218

89223

89148

91560

89376

37

89148

91560

89138

89136

2313

:: Air Filter

2208

3719
25620
81124
81125

Large Hood Pins
Nylon Wire Tie, 6”
3 x 10mm SHCS
RC8B3 Air Filter & Boot
RC8B3 Air Filter Element

6
12
20

1

1

81124

25620

2208

89133

89137

89134

81124

81124

3719

81125

:: Fuel Tank

3719
25211
31520
81120
81122
81262
89218

Nylon Wire Tie, 6”
3 x 10mm BHCS

2.5 x 6mm BHCS
RC8B3 Fuel Tank
RC8B3 Tank Post / Grommet
4 x 10mm FHCS
3 x 8mm Washer

1

20

6
1

2 ea.

6

10

25211
89218

81122

81122

3719

81262

81122

81262

25211

89218

81122

81120

81120

31520

38

:: Anti-Roll Bars

25225
81130

81131

81140

81141

81150
81258

3 x 3mm Set Screw
RC8B3 Front Anti-Roll Bars,
(2.3 - Black, 2.4 - Green, 2.5 - White)
RC8B3 Front Anti-Roll Bars,
(2.6 - Gray, 2.7 - Blue, 2.8 - Yellow
RC8B3 Rear Anti-Roll Bars,
(2.5 - White, 2.6 - Gray, 2.7 - Blue)
RC8B3 Rear Anti-Roll Bars,
(2.8 - Yellow, 2.9 - Red, 3.0 - Orange)
RC8B3 Anti-Roll Bar Drop Link / Collet
3 x 12mm Set Screw

81130
81131
81140
81141

81150

81150

81150

81258

20

1 ea.

1 ea.

1 ea.

1 ea.

1
6

:: Wing

25187
25203
25215
81106
81108
81263

81106

25215

3 x 14mm BHCS
3 x 12mm FHCS
M3 Locknut, Black
RC8B3 Wing, Black (1 wing, 2 wing buttons)
RC8B3 Wing Mount, 1 high, 1 low
4 x 16mm FHCS

25203

81106

81106

20
20
20

1

1 ea.

6

81263

25225

81150

:: Fueling Supplies

1738

1748

1751

7724

7725

7994

FT Glow Starter
Nitro Fuel Bottle 600cc
FT Compact Starter Box
Fuel Line 15”
Fuel Line 3’
D-Size Glow Ignitor

1751

1748

25225

81150

81108

25187

:: Wheels / Tires / Bodies / Decals

2
1
1
1
1
1

716
3816
3820
3834
9787

81110
81270
89152
89153
89255
89296
89297

Reedy 2009 Sticker Set
American Bumper Sticker
AE Logo Decal Sheet
AE Blue Embossed Logo Sticker
FT Chassis Protective Sheet
RC8B3 Pro Line Body
RC8B3 Decal Sheet
RC8 Wheels (White)
RC8 Wheels (Yellow)
RTR Pre-Glued Wheel/Tire (White)
RC8 83mm Wheels (White)
RC8 83mm Wheels (Yellow)

89255

25215

1
1
1
2
1
1
1
4
4

Pr.

4
4

7724
7725

39

:: Factory Team and Option Parts

2357

7733
25094
25392
29213
31550
89094
89095
89123
89127
89132
89136
89146
89147
89157
89158
89159
89161
89178
89181
89229
89265
89273
89274
89375
89405
89406
89473
89495

Rear Exhaust Manifold Springs
Exhaust Tubing Coupler
Exhaust Manifold Springs
3mm Blue Locknut, Flanged
Servo Wire Extension
M3 Aluminum Lock Nut
Nyloc Wheel Hex Nuts, Blue
Wheel Hex, Aluminum
RC8 Heatsink Brake Disc
Clutch Bell, 17T
Clutch Bell, 16T
RC8 Flywheel, Hard
RC8/T Clutch Shoes, Hard
Header Gasket

0.9mm Clutch Spring

1.1mm Clutch Spring
Short Clutch Nut
Steering Bearing Set
FT 1/8 Scale Polished Header
Muffler to Header Spring
Blue Countersunk Washer
Fiber Clutch Shoe
RTR Tuned Pipe
RTR Header
Clutch Bell, 14T
Nyloc Wheel Nuts (Silver)
Nyloc Wheel Nuts (Black)
Steel Shock Standoff
RC8 FT Light Spur Gear, 44T

:: Reedy Batteries

2
1
2

10

1
6
2
2
2
1
1
1
3
4
3
3
1
1
1
3

10

3
1
1
1
4
4
2
1

302
304
305
315
613
637

AA Alkaline 1.5V (4)
LiPo Pro TX/RX Battery 1600mAh 7.4V Flat
LiFe Pro TX/RX Battery 1300mAh 6.6V Flat
LiPo Pro TX/RX Battery 2100mAh 7.4V Flat
NiMH RX Battery 1600mAh 6.0V Flat
LiPo TX Battery - M11X 2500mAh 7.4V

:: Reedy Electronics

616
27100
27101
27102
27103
27104
27105

423-S AC 35W Compact Balance Charger
RS1206 Digital HV Hi-Speed Competition Servo
RT1508 Digital HV Hi-Torque Competition Servo
RS1206 Servo Case Set w/screws
RS1206 Servo Gear Set
RT1508 Servo Case Set w/screws
RT1508 Servo Gear Set

:: Reedy Nitro Engine Accessories

28040
28041
28050

Pro RT3 Turbo Glow Plug
Pro RT4 Turbo Glow Plug
Reedy Glow Plug Caddy

1
1
1
1
1
1

1
1
1
1
1
1
1

1
1
1

:: Lubes & Adhesives / Misc.

1105
1596
1597
5450
5451
5452
5444
5453
5446
5447
5454
5455
5456
5457
5458
5448
5459
5461
5463
5465
6588
6591
6636
6727
7710

FT Green Slime Shock Lube
FT Locking Adhesive
FT Tire Adhesive, Medium
Silicone Diff Fluid 1,000CST
Silicone Diff Fluid 2,000CST
Silicone Diff Fluid 3,000CST
Silicone Diff Fluid 4,000CST
Silicone Diff Fluid 5,000CST
Silicone Diff Fluid 6,000CST
Silicone Diff Fluid 15,000CST
Silicone Diff Fluid 7,000CST
Silicone Diff Fluid 10,000CST
Silicone Diff Fluid 20,000CST
Silicone Diff Fluid 30,000CST
Silicone Diff Fluid 60,000CST
Silicone Diff Fluid 80,000CST
Silicone Diff Fluid 100,000CST
Silicone Diff Fluid 200,000CST
Silicone Diff Fluid 500,000CST
Silicone Diff Fluid 1,000,000CST
Black Grease - 4cc
S.Diff Lube - 4cc
Silicone Grease - 4cc
Servo Tape
FT Foam Prefilter Treatment, 1 oz.

:: XP Electronics

1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1

1596

1
1
1
1
2
1

304
305
612
613
631
636

638
29133
29134
29128
29115
29116
29166
29167
29168
29215
29216

LiPo Pro RX Battery 1600mAh 7.4V Flat
LiFe Pro RX Battery 1300mAh 6.6V Flat
NiMH RX Battery 1600mAh 6.0V Hump
NiMH RX Battery 1600mAh 6.0V Flat
LiPo RX Battery 2100mAh 7.4V

6.0V 5A Voltage Regulator
LiFe RX Battery 1700mAh 6.6V
XP DS1903 Digital Servo
XP DS1903MG Digital Servo
C1016 Micro Servo
Switch Harness
4-AA Battery Harness
XP DS1313 Digital Servo
XP DS1015 Digital Servo
XP DS1510 Digital Servo
XP2G 2.4GHz Radio System
XP3G 2.4GHz Radio System

1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1

40

:: Kicker

29269
29270

KICKER KPw Wireless Speaker System, black
KICKER KPw Wireless Speaker System, white

:: Qualifier Series Vehicles

7062

7070
20111
20119
20510

30112
30113

30113D

30114
30115

Pro SC 4x4 RTR, 1/10 Scale (ready-to-run)
Pro Rally 4wd RTR, 1/10 Scale (ready-to-run)
Rival Mini Monster Truck 1/18 Scale (ready-to-run)
APEX Mini Touring 1/18 Scale (ready-to-run)
RIVAL Electric Monster Truck RTR, 1/8 Scale
(ready-to-run)
APEX Touring V-Type, 1/10 Scale (ready-to-run)
APEX Scion Racing FR-S 1/10 Scale (ready-to-run)
APEX Scion Racing FR-S Drift 1/10 Scale
(ready-to-run)
APEX Scion Racing tC 1/10 Scale (ready-to-run)
APEX Lexus RC F, 1/10 Scale (ready-to-run)

:: 1/18 Kits and RTR’s

20103
20121

RC18B2 - RC18T2 Team Kit
SC18 RTR Brushless (ready-to-run)

:: 1/12, 1/10 Kits and RTR’s

4020

FT 12R5.2 Kit

7030

SC10 KMC Wheels Race Truck RTR (ready-to-run)

7038

FT SC10.2 Kit

7039

RC10T4.2 RS RTR 2.4GHz Brushless (ready-to-run)

7046

SC10 RS RTR, Lucas Oil (ready-to-run)

7049

SC10 RS RTR, Rockstar/Makita (ready-to-run)

7093

SC10GT RTR (ready-to-run)

9042

RC10B4.2 RS RTR 2.4GHz Brushless (ready-to-run)

9050

SC10B RS RTR (ready-to-run)

9063

30101
30109
70001
90001
90003

FT B44.3 4WD Buggy Kit
TC4 Club Racer 4WD Touring Car Race Roller
FT TC6.2 Kit
RC10T5M Team Kit
RC10B5 Team Kit
RC10B5M Team Kit

1
1

1
1
1
1
1

1
1
1

1
1

1
1

1
1
1
1
1
1
1
1
1
1
1
1
1
1
1

:: Tools

1111
1112
1449
1541
1542
1543
1544
1545
1546
1547
1548
1553
1554
1562
1563
1564
1565
1567
1589
1590
1592
1655
1656
1657
1658
1659
1660
1661
1662
1663
1664
1665
1666
1667
1668
1669
1670
1671
1672
1673
1674

1675
1719
1737
3718
3719
3720
3987

7709
89240
89358
91107

FT Turnbuckle Wrench
FT 4mm Turnbuckle Wrench
Offroad Ride Height Gauge
FT Hex Driver Set, (7 pcs)
FT .050” Silver Hex Driver
FT 1/16” Black Hex Driver
FT 1.5mm Purple Hex Driver
FT 5/64” Blue Hex Driver
FT 3/32” Gold Hex Driver
FT 2.5mm Green Hex Driver
FT 3mm Red Hex Driver
FT Phillips Silver Screwdriver
FT Silver Spring Hook Tool
FT 3/16” Black Nut Driver
FT 1/4” Red Nut Driver
FT 5.5mm Red Nut Driver
FT 11/32” Green Nut Driver
FT 8mm Gold Nut Driver
FT 5/64” Blue Ball Hex Driver
FT 3/32” Gold Ball Hex Driver
FT Ball Hex Driver Set, (3 pcs)
FT 8-Piece 1/4” Hex Drive Set
FT 1/4” Hex Drive Handle, without tips
FT 1/4” Hex Drive .050” Tip
FT 1/4” Hex Drive 1/16” Tip
FT 1/4” Hex Drive 5/64” - 2.0mm Tip
FT 1/4” Hex Drive 3/32” Tip
FT 1/4” Hex Drive 1.5mm Tip
FT 1/4” Hex Drive 2.5mm Tip
FT 1/4” Hex Drive 3/16” Nut Driver Tip
FT 1/4” Hex Drive 1/4” Nut Driver Tip
FT 1/4” Hex Drive 11/32” Nut Driver Tip
FT 1/4” Hex Drive 5.5mm Nut Driver Tip
FT 1/4” Hex Drive 7.0mm Nut Driver Tip
FT 1/4” Hex Drive 8.0mm Nut Driver Tip
FT 1/4” Hex Drive 5/64” - 2.0mm Ball End Tip
FT 1/4” Hex Drive 3/32” Ball End Tip
FT 1/4” Hex Drive Standard Screwdriver Tip
FT 1/4” Hex Drive Phillips Screwdriver Tip
FT 1/4” Hex Drive 2.5mm Ball End Tip
FT 1/4” 5 Piece Power Tool Tips Set (5/64-2.0mm,

1.5mm, 2.5mm, 5/64”- 2.0mm ball, 2.5mm ball)
FT Shock Shaft Pliers
FT Camber + Track Width Tool
FT Body Scissors
12 Inch Nylon Wire Ties
6 Inch Nylon Wire Ties
8 Inch Nylon Wire Ties
FT Droop Gauge
4 Inch Nylon Wire Ties
FT RC8 Turnbuckle Wrench
16mm Big Bore Shock Tools
13mm Shock Tools

1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1

1
1

1
12
12
12

1
12

1

1

1

:: 1/8 Kits and RTR’s

20501
20502
20503

20504

80907
80908
80909
80912

MGT 4.60 SE RTR (ready-to-run)
MGT 8.0 Nitro RTR (ready-to-run)
Limited Edition MGT 4.60 Nitro RTR, w/flag body
(ready-to-run)
Limited Edition MGT 8.0 Nitro RTR, w/flag body
(ready-to-run)
RC8.2e Electric Buggy FT Kit
RC8.2e Electric Buggy RTR (ready-to-run)
RC8.2RS Nitro Buggy RTR (ready-to-run)
RC8T Championship Edition

Associated Electrics, Inc.

26021 Commercentre Drive

1
1
1

1

1
1
1
1

Lake Forest, CA 92630-8853 USA

http://www.TeamAssociated.com

http://www.RC10.com

http://twitter/Team Associated

http://bit.ly/AEonFacebook

call: [phone]

fax: [phone]

Check out the following web sites for all

of our electric kits, current products, new

releases, setup help, tips, and racing info!

www.TeamAssociated.com. - www.RC10.com

41

:: RePlay Cameras

RP004
RP005
RP021
RP022
RP023
RP029
RP030
RP032
RP034
RP036
RP042
RP043
RP044
RP045
RP046
RP047
RP048
RP049
RP050
RP054
RP055
RP056
RP057
RP058
RP059
RP060

Replay XD1080 Mini Complete Camera System
Replay XD PrimeX Camera System
Replay XD1080 Lens Bezel Kit
Replay XD1080 Clear Lens Cover
Replay XD1080 Lens Bezel & Rear Cap O-Ring
Replay XD1080 HDMI to Mini-HDMI
Replay XD1080 Mini 8-pin USB Charge Data Cable
USB DC Car Charger 1A Stubby
Micro SDHC USB Reader
3M VHB 4991 Mount Adhesive for SnapTray
Replay XD Suction Cup Short Arm Base
Replay XD Skateboard Mount
Replay XD VHB SnapTray, Convex
Replay XD VHB SnapTray, Flat
Au Plug for Universal DC Wall Charger
Eu Plug for Universal DC Wall Charger
Uk Plug for Universal DC Wall Charger
Universal USB DC Wall Charger 1A
Au Plug for Uni DC Wall Charger
Replay ReView Field Monitor
Replay PrimeX Lens 5 pack
Replay PrimeX HDMI Cable
Replay PrimeX Deep Dive Waterproof Case
Replay PrimeX Heim Lock Mount
Replay PrimeX Low Boy Mount
Replay PrimeX Tilt Mount

:: Notes

1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1

:: Apparel

SP17**
SP18**
SP19**

SP20
SP22**
SP23**
SP24**
SP32**

SP38

SP39
SP84**
SP87**
SP90**
SP91**
SP92**
SP93**
SP96**

SP110*
SP111*

SP420**

SP421S
SP421L

:: Notes

SP422S
SP422L
SP423S
SP423L
SP424S
SP424L

SP425

715
110684
110685

AE INT’L T-Shirt - Black (S, M, L, XL-5XL)
AE INT’L T-Shirt - White (S, M, L, XL-5XL)
AE INT’L Hoodie - Black (S, M, L, XL-3XL)
AE Patch Trucker Hat
Reedy Vintage ‘81 T-Shirt - Blue (S, M, L, XL-3XL)
AE Splash T-shirt - Black (S, M, L, XL-5XL)
AE Splash T-shirt - Blue (S, M, L, XL-5XL)
AE Kids T-shirt - Blue (S, M, L)
Reedy Trucker Hat
Reedy Patch
Reedy 3D T-Shirt, Black (S, M, L, XL-3XL)
AE 2013 Zip Hoodie (S, M, L, XL-3XL)
AE Retro T-shirt, Blue (S, M, L, XL-5XL)
AE Retro T-shirt, Black (S, M, L, XL-5XL)
AE Retro T-shirt, White (S, M, L, XL-5XL)
AE 2013 Worlds T-shirt - Blue (S, M, L, XL-5XL)
AE Womens Retro - Pink (S, M, L, XL)
Reedy R-Powered T-Shirt - Black (S, M, L, XL-3XL)
Reedy W15 Sweatshirt - Black (S, M, L, XL-3XL)
AE Pit Gloves (XL)
AE 2012 Hat, Black, Flat Bill, S/M
AE 2012 Hat, Black, Flat Bill, L/XL
AE 2012 Hat, Black, Curved Bill, S/M
AE 2012 Hat, Black, Curved Bill, L/XL
AE 2012 Hat, White, Flat Bill, S/M
AE 2012 Hat, White, Flat Bill, L/XL
AE 2012 Hat, White, Curved Bill, S/M
AE 2012 Hat, White, Curved Bill, L/XL
FT Fluid Carrier
Reedy 2009 Track Banner
Team Associated Track Banner
Team Associated Cloth Banner

1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1

Pr.

1
1
1
1
1
1
1
1
1
1
1
1

** Use part number plus the desired size when ordering!

current products, new releases, setup help, tips, and racing info!

Check out the following web sites for all of our kits,

www.TeamAssociated.com. - www.RC10.com

call: [phone] - fax: [phone]

http://twitter/Team_Associated

http://bit.ly/AEonFacebook

http://www.TeamAssociated.com

Lake Forest, CA 92630 USA

26021 Commercentre Dr.

http://www.RC10.com

Associated Electrics, Inc.