TEAC CTM-6811 Service manual

TEAC

y

y

SERVICE MANUAL

CT-M6811

1. Caution……………………………………………………………2

2. Specification………………………………………………………6

3. BOM List ……………………… ………………… ……………..9

4. Alignment Procedure………………………………………….…36

5. Block Diagram……………………………………………………40

6. Schematic Diagram………………………………………………41

7. PCB Layout………….……………………………………………42

8. Explode Diagram View………….………………………………44

This manual is the latest at the time of printing, and does not

include the modification which ma

the constant improvement of product.

be made after the printing, b

CAUTION:

Use of controls, adjustments or procedures other than those specified herein may result in
hazardous radiation exposure.

CAUTION: T O REDUCE THE RISK OF

CAUTION

RISK RISK OF OF ELECTRIELECTRICC

SHOCK SHOCK DO DO NOT NOT OPEN.OPEN.

The lighting flash with arrowhead symbol, with an equilateral triangle is intended to
alert the user to the presence of uninsulated voltage within the products
enclosure that may be of sufficient magnitude to constitute a risk of electric shock to
the person.

The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the
literature accompanying the appliance.

ELECTRICAL SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.

dangerous

WARNING: TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT

EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

2

IMPORTANT SAFETY INSTRUCTIONS

CAUTION:

Read all of these instructions. Save these instructions for later use . Follow all Warnings and
Instructions marked on the audio equipment.

1. Read Instructions- All the safety and operating instructions should be read before the product is operated.

2. Retain Instructions- The safety and operating instructions should be retained for future reference.

3. Heed Warnings- All warnings on the product and in the operating instructions should be adhered to.

4. Follow Instructions- All operating and use instructions should be followed.

FOR YOUR PERSONAL SAFETY

1. When the power cord or plug is damaged or frayed, unplug this television set from the wall outlet and refer servicing to
qualified service personnel.

2. Do not overload wall outlets and extension cords as this can result in fire or electric shock.

3. Do not allow anything to rest on or roll over the power cord, and do not place the TV where power cord is subject to
traffic or abuse. This may result in a shock or fire hazard.

4. Do not attempt to service this television set yourself as opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified service personnel.

5. Never push objects of any kind into this television set through cabinet slots as they may touch dangerous voltage
points or shor t out parts that could result in a fire or electric shock. Never spill liquid of any kind on the television set.

6. If the television set has been dropped or the cabinet has been damaged, unplug this television set from the wall outlet
and refer servicing to qualified service personnel.

7. If liquid has been spilled into the television set, unplug this television set from the wall outlet and refer servicing to
qualified service personnel.

8. Do not subject your television set to impact of any kind. Be particularly careful not to damage the picture tube surface.

9. Unplug this television set from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a
damp cloth for cleaning.

10.1. Do not place this television set on an unstable cart, stand, or table. The television set may fall, causing serious injury
to a child or an adult, and serious damage to the appliance. Use only with a cart or stand recommended by the
manufacturer, or sold with the television set. Wall or shelf mounting should follow the manufacturer s instructions, and
should use a mounting kit approved by the manufacturer.

10.2. An appliance and car t combination should be moved with care. Quick stops, excessive force, and uneven surfaces
may cause the appliance and cart combination to overturn.

3

PROTECTION AND LOCATION OF YOUR SET

11. Do not use this television set near water ... for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a

wet basement, or near a swimming pool, etc.
Never expose the set to rain or water. If the set has been exposed to rain or water, unplug the set from the wall
outlet and refer servicing to qualified service personnel.

12. Choose a place where light (artificial or sunlight) does not shine directly on the screen.

13. Avoid dusty places, since piling up of dust inside TV chassis may cause failure of the set when high humidity persists.

14. The set has slots, or openings in the cabinet for ventilation purposes, to provide reliable operation of the receiver, to
protect it from overheating. These openings must not be blocked or covered.

Never cover the slots or openings with cloth or other material.
Never block the bottom ventilation slots of the set by placing it on a bed, sofa, rug, etc.
Never place the set near or over a radiator or heat register.
Never place the set in enclosure, unless proper ventilation is provided.

a built-in

PROTECTION AND LOCATION OF YOUR SET

15.1. If an outside antenna is connected to the television set, be sure the antenna system is grounded so as to provide some

protection against voltage surges and built up static charges, Section 810 of the National Electrical Code, NFPA No.
70-1975, provides information with respect to proper grounding of the mast and supporting structure, grounding of the
lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection
to grounding electrode, and requirements for the grounding electrode.

EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE INSTRUCTIONS

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONALELECTRICAL CODE

ANTENNA
LEAD- INWIRE

GROUND CLAMP

ELECTRIC SERVICE

EQUIPMENT

NEC-NATIONALELECTRICAL CODE

ANTENNA DISCHARGE
UNIT (NEC SECTION
810-20)

GROUNDING
CONDUCTORS
(NECSECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250. PARTH)

15.2. Note to CATV system installer : (Only for the television set with CATV reception)

This reminder is provided to call the CATV system attention to Article 820-40 of the NEC that provides

installer s
guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding
system of the building, as close to the point of cable entry as practical.

16. An outside antenna system should not be located in the vicinity of overhead power lines or other electric lights or power
circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care
should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

17. For added protection for this television set during a lightning storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage due to lightning
and power-line surges.

4

OPERATION OF YOUR SET

18.

This television set should be operated only from the type of power source indicated on the marking label. If you are not
sure of the type of power supply at your home, consult your television dealer or local power company. For television
sets designed to operate from battery power, refer to the operating instructions.

19. If the television set does not operate normally by following the operating instructions, unplug this television set from the
wall outlet and refer servicing to qualified service personnel. Adjust only those controls that are covered in the operating
instructions as improper adjustment of other controls may result in damage and will often require extensive work by a
qualified technician to restore the television set to normal operation.

20. When going on a holiday : If your television set is to remain unused for a period of time, for instance, when you go on
a holiday, turn the television set and unplug the television set from the wall outlet.

off

IF THE SET DOES NOT OPERATE PROPERLY

21. If you are unable to restore normal operation by following the detailed procedure in your operating instructions,
do not attempt any further adjustment. Unplug the set and call your dealer or service technician.

22. Whenever the television set is damaged or fails, or a distinct change in performance indicates a need for
service, unplug the set and have it checked by a professional service technician.

23. It is normal for some TV sets to make occasional snapping or popping sounds, particularly when being
turned on or off. If the snapping or popping is continuous or frequent, unplug the set and consult your
dealer or service technician.

FOR SERVICE AND MODIFICATION

24. Do not use attachments not recommended by the television set manufacturer as they may cause hazards.

25. When replacement parts are required, be sure the service technician has used replacement parts specified
by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions
may result in fire, electric shock, or other hazards.

26. Upon completion of any service or repairs to the television set, ask the ser vice technician to perform
routine safety checks to determine that the television is in safe operating condition.

5

PFS2 FORMAT-1 Report

p

p

g

g

gy

g

q

q

y

r

y

y

g

g

play

ype

(

y

y)

y)

g

g (

)

p

p

p

p

guag

p

p

Date:2004-3-3 17:10

ProductView......:

Re

ort by............:

Specs / Products

MasterData
Customer Id
Version
Status
Brand
EAN
UPC

tion

Rece
+Tunin
+Tunin
+Tunin
+Fre
+Channels
+IF Fre
+TV S
+Add Systems Ext In

+TV S
+Sound S
Picture - Processin
+Scan
+Scan Modes
+Wide Screen Switchin
+Combfilter
+Picture Control

+Pict Enhancement
+Pict Noise Reduction
Picture - Dis
+Display T
+Screen Format
+Size
+Deflection S
+Tube Technology (CRT onl
+CRT Defl
+CRT Gun
+CRT Ma
+Resolution
+Coatin
+White Point
Sound
+RMS Power Intern
+RMS Power Extern
+Surround Sound
+Sound Features
+Sound Control
Sound - S
+S
+S
+S
User Interface
+Interface Name
+Voice Control
+Menu
+Menu Colours
+Menu Lan
+Special Features

+O
+PP Features
+Tuning/Install Features

+Clock/Timer Functions
+Local Controls Front

+Local Controls To

- presets/channels

- technolo

- Indication

Bands

stems Off Ai

stems Multi

stems

Visual)" - size/vis. cm

stem (CRT onl

n field

only for D.V. sets

eakers
eaker configuration
eakers used
eaker Size

es

erational Features

Product:

CT-M6811

TEAC AUSTRALIA PTY. LTD

0.1

New

TEAC

\
\

100
PLL

HYPER BAND
CATV 470MHz

PICTURE 38.9MHz

PAL B/G

NTSC 3.58, NTSC 4.43, NTSC Play

Back, PAL 60

PAL

AV Stereo

Standard

4;3

Brightness, Colour, Contrast, Color
Temperature, Hue, Sharpness Cont
Var, Smart Pict. 4 Modes

Black Stretch

NR

DV - CRT - RF
4:3
29"

Black Matrix, Iron

Stand Gun

Mute
Volume

2 Speakers

Normal

L01- Full Interface

Cursor Control

English
Program preengage/soft start
/ Build-in Game / Hotel Lock /
Channel Edit / Calendar/
Notebook/Favorite channel
Alternate Channel

Auto Store, Factory Mode, Fine
Tuning, Manual Search/Store,
Manual Sort, Service Mode
Clock, On/off timer, Sleep timer
Channel +-, Volume +-,
TV/AV,MENU,
Power Switch,

2004-3-4 8:54 2922 PFS 1 of 3

Date:2004-3-3 17:10

p

(

)

(

)

(

)

r

p

(

)

)

)

)

)

(

)

)

(

)

y

g

p

t

)

(

)

)

(

)

(

)

)

p

)

p

p

y

g

g

p

p

y

g

y

g

q

y

yp

p

p

p

y

ProductView......:

Re

ort by............:

Specs / Products

+Indicators - screen
+Indicators - front
+Numb of Loc Cont
+Number of Ind.
+Local Controls
Remote Control
Connectors Rea
+Scart RGB+Y/C+CVBS
+Scart RGB+CVBS
+Scart CVBS+Y/C
+Com
+In Y/C+Cinch
+In Y/C+Cinch(CVBS+Mo
+In Y/C+Cinch(St
+In BNC (CVBS
+In Cinch(CVBS+St
+In Cinch
+Out Cinch(CVBS+St
+Out Cinch
+Out Cinch Audio Stereo
+Out Cinch Audio Mono
+Out Cinch Dolb
+Out Cinch Subwoofer
+Di
+Louds
+Control Busses
+Feature Slot
+ITV Smart Port
+Terr. Antenna in
Guide + IR Blaster Jack
Connectors Fron
+In Y/C + Cinch(CVBS+St
+In Y/C + Cinch Stereo
+In Cinch
+In Cinch (CVBS+Mo +St
+Headphone Out
+Feature Slot
Connectors Side
+In Y/C + Cinch
+In Y/C + Cinch Stereo
+In Cinch
+IN Cinch (CVBS + Mo
+Headphone Out
Connectors To
+In Cinch (CVBS + St
+Headphone Out
Connectors Mechanical
+Head
+Cinch A/V in/out
+Cinch Com
+Cinch Y/C
St
+Cabinet Name
+Confi
+Gra

-Cabinet Colour and Finish

Silver Frost

+Mechanics
+S
General
+Se
+Chassis
+Software Deliver
+Software Version
+Mains Volta
+Mains Fre
+T
Power Consum
Power Consum
Power Consum
+Power in "ON" for
+Power in Standb

onent In (Y/U/V) Cinch

CVBS+Mo

CVBS+Mo

Audio Out

eakers

CVBS + St

CVBS + St+ Mo

hone

lin

uration

hics/Logo's

eaker Visibilit

ment

uenc

e Mains Cord

incl Mains
incl Mains
Old

CVBS+St

Surround

CVBS+St+ Mo

onent

Mode

e

tion (P)TV in On
tion SB in Watts
tion Semi SB in W

for

Product:

CT-M6811

RC Recvd LED, SB LED

7
1

X

X

75 Ohms (IEC type)

x

2922

Standard

Standard 4:3
M113

240V
50Hz
SAA, New Standard

Less than 3W

2004-3-4 8:54 2922 PFS 2 of 3

Date:2004-3-3 17:10

p

g

g)

)

g

R

quip

ging

guag

pp

pp

pp

quip

ging

ging

ging

pp

g

V

ype

g

y

(

g

gy

g

g

ype

ype

y

yp

yp

k

y

g

t

)

y

)

ProductView......:

Re

ort by............:

Specs / Products

+Power in "OFF" for
Wei
Weight (P)TV (excl. Package
Weight AVUnit excl Packagin
+INDICATION on BACKCOVE
+Channel
Final E
+Packa
+Documents and manuals
+Lan
+Cables Su
+Antenna Su
+Stand Su
+Aux E
Packa
Packa
Packa
Miscellaneous
+EAN Indication
+A
+Tests
+Local Inte

+Service Call-Rate
PIP/POP
+T
+Features
Di
+Transmission
Built-in Data S
+Text Standard
+
+Nbr bck
+Text Technolo
+Di
+Program Guide
Built-in Clock/Timer
+T
+Features
Built-in Radio
+T
Built-in PC displa
+PC Synch
+PC Control
Built-in DVD drive
+T
+T
+Version of Deck
Phased Out Items
+Tuner/Frontend
+Sensitivit
+CRT EHT
+Li
+Accoun
+XX(Radio Antenna in
+Non Volatile Memor
+In Y/C + Cinch(CVBS+Mo
Version of deck

ht (P)TV (incl. Packagin

ment

- methods

es DFU

lied

lied

lied

m Supplied

- width cm

- height cm

- depth cm

robation

ration

arious Perf. Param.

ital Reception

stem

Tele)text Features

rnd page / Mem Size

ital Data handlin

e of Medium
e of Dec

htning Protection

Product:

CT-M6811

No

No
No
No

2004-3-4 8:54 2922 PFS 3 of 3

Item No. Description Quantity Req. Designator Remarks

08-29224E-CR1 ASS'Y - CRT BD 1
10-1N4148-ABX DIODE 1N4148 (SWITCHING) 1 D501
10-1N4148-ABX DIODE 1N4148 (SWITCHING) 1 D502
10-1N4148-ABX DIODE 1N4148 (SWITCHING) 1 L501("1" TO P501"1")
11-A562TM-0BX TRANSISTOR 2SA562TM-0 1 Q507
11-SC1815-YBX TRANSISTOR 2SC1815Y 1 Q502
11-SC1815-YBX TRANSISTOR 2SC1815Y 1 Q504
11-SC1815-YBX TRANSISTOR 2SC1815Y 1 Q506
11-SC4544-0AX TRANSISTOR 2SC4544 1 Q501
11-SC4544-0AX TRANSISTOR 2SC4544 1 Q503
11-SC4544-0AX TRANSISTOR 2SC4544 1 Q505
18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R515
18-CB0272-JNX RES. C.F. 2.7k OHM 1/6W +/-5% 1 R514
18-CB0561-JNX RES. C.F. 560 OHM 1/6W +/-5% 1 R501
18-CB0561-JNX RES. C.F. 560 OHM 1/6W +/-5% 1 R505
18-CB0561-JNX RES. C.F. 560 OHM 1/6W +/-5% 1 R510
18-CB0681-JNX RES. C.F. 680 OHM 1/6W +/-5% 1 R502
18-CB0681-JNX RES. C.F. 680 OHM 1/6W +/-5% 1 R506
18-CB0681-JNX RES. C.F. 680 OHM 1/6W +/-5% 1 R509
18-CB0681-JNX RES. C.F. 680 OHM 1/6W +/-5% 1 R522
18-CB0681-JNX RES. C.F. 680 OHM 1/6W +/-5% 1 R503
18-CB0681-JNX RES. C.F. 680 OHM 1/6W +/-5% 1 R508
18-CB0681-JNX RES. C.F. 680 OHM 1/6W +/-5% 1 R513
18-CB0681-JNX RES. C.F. 680 OHM 1/6W +/-5% 1 R511
18-FE0272-JNX RES. M.O. 2.7K OHM 1/2W +/-5% 1 R519
18-FE0272-JNX RES. M.O. 2.7K OHM 1/2W +/-5% 1 R520
18-FE0272-JNX RES. M.O. 2.7K OHM 1/2W +/-5% 1 R521
18-FG0183-JHX RES. M.O. 18K OHM 2W +/-5% 1 R516
18-FG0183-JHX RES. M.O. 18K OHM 2W +/-5% 1 R517
18-FG0183-JHX RES. M.O. 18K OHM 2W +/-5% 1 R518
25-BLA100-M1X CAP. ELEC 10 UF 250V +/-20% 1 C504
26-AMK102-KRX CAP. CER 1000 pF 2KV +/-10% R 1 C505
26-EBP103-ZFX CAP. CER 0.01UF 50V +80/-20% F 1 C508
26-EBP103-ZFX CAP. CER 0.01UF 50V +80/-20% F 1 C509
26-EBP391-JCX CAP. CER. 390PF 50V +/-5% CH 1 C502

9

Item No. Description Quantity Req. Designator Remarks

26-EBP391-JCX CAP. CER. 390PF 50V +/-5% CH 1 C501
26-EBP471-JCX CAP. CER 470PF 50V +/-5% CH 1 C503
34-R100K2-1BX COIL CHOKE 10 UH +/-10% 1 L503
35-237250-00X FERR. BEAD HF70 4.5X5.0 2 FOR C508 (L505 & L506)
40-02501C-CRG P.C.B. CRT BD 1
41-WJ0050-B00 WIRE BARE JUMPER 5MM 1 L504
41-WJ0050-B00 WIRE BARE JUMPER 5MM 1 L502
41-WJ0060-B00 WIRE BARE JUMPER 6mm 1 R504
41-WJ0060-B00 WIRE BARE JUMPER 6mm 1 R507
41-WJ0060-B00 WIRE BARE JUMPER 6mm 1 R512
41-WJ0075-B00 WIRE BARE JUMPER 7.5MM 1 J503
46-10967W-01X PIN BASE *1 TJC1-1A 1 P501 FOR CRT GROUNDING HOUS.
46-30615H-04X HS 4P24 460 F/W TJC3-4Y/SCN-4 1 P502 FOR M.BD P421
46-37030H-05X HS 5P 2468#24 450 TJC3-5Y/SCN 1 P503 FOR M.BD P201
25-BCB471-M1X CAP. ELEC 470 UF 16V +/-20% 1 C506
47-265540-0U7 SOCKET CRT GZS10-2-4 (C.B.) 1 S501
08-2922XE-FB1 ASS'Y - FRONT CTL BD 1
18-CB0103-JNX RES. C.F. 10K OHM 1/6W +/-5% 1 R087
18-CB0103-JNX RES. C.F. 10K OHM 1/6W +/-5% 1 R081
18-CB0152-JNX RES. C.F. 1.5k OHM 1/6W +/-5% 1 R082
18-CB0182-JNX RES. C.F. 1.8K OHM 1/6W +/-5% 1 R083
18-CB0272-JNX RES. C.F. 2.7k OHM 1/6W +/-5% 1 R084
18-CB0432-JNX RES. C.F. 4.3K OHM 1/6W +/-5% 1 R085
18-CB0622-JNX RES. C.F. 6.2k OHM 1/6W +/-5% 1 R086
40-2922AE-KEA P.C.B. KEY BD 1
48-TAC026-XX0 TACT SWITCH KFC-A06A-12 1 S001
48-TAC026-XX0 TACT SWITCH KFC-A06A-12 1 S002
48-TAC026-XX0 TACT SWITCH KFC-A06A-12 1 S003
48-TAC026-XX0 TACT SWITCH KFC-A06A-12 1 S004
48-TAC026-XX0 TACT SWITCH KFC-A06A-12 1 S005
48-TAC026-XX0 TACT SWITCH KFC-A06A-12 1 S006
48-TAC026-XX0 TACT SWITCH KFC-A06A-12 1 S007
46-39161H-05X HS 5P 2468#24 400mm TJC3-5Y/JC25-5Y 1 P005
46-38570H-04X HS 4P 2468#24 200 TJC3-4Y/JC25-4Y 1 P005B
63-B30080-BT4 S/T SCREW B 3 X 8 BT 5 FOR CONTROL PCB TO F.CAB

10

Item No. Description Quantity Req. Designator Remarks

08-29224E-FC2 ASS'Y - FRONT CABINET 1
02-GND029-XX0 ASS"Y-CRT GND WIRE & HOUS.(29) 1
44-29OFLW-TS4A CRT A68AGA20X99 1 CRT01
46-26514H-04X HS 4P A/B 500/13 RBGW TJC1-4Y 1 P411H
54-205140-000 SPACER CRT MOUNTING T=2MM 4 FOR CRT MTG.
54-314740-0X0 CRT FIBRE SHEET (22mmX22mmX0.8mm) 4 FOR CRT MTG.
55-2922FC-0CN FRONT CABINET 1
55-2922FD-0HA FRONT DOOR 1
56-2922LE-0HC LIGHT GUIDING POST 1
56-2922PK-0HA POWER KNOB 1
58-2922FI-1UI INLAY FRONT AV 1
62-227680-0UA BRACKET ABS-KINGFA 606 (UO) 2
62-388060-0UA POWER CORD NIP 1
63-B30080-AB4 S/T SCREW B 3 X 8 AB 1 FOR WASHER TO AC LINE CORD CLIP MTG
63-H60300-AB4 S/T SCREW H 6 X 30 AB 4 FOR CRT MTG.
65-A60180-20E EXT. TOOTH WASHTER 6 X 18 X 2 4 FOR CRT MTG.
54-295210-0V0 FIBER WASHER 1 FOR NIP
63-W40150-AB4 S/T SCREW W 4 X 15 AB 8 FOR FIXING MAIN SPEAKER
67-X21679-0E0 SPRING CRT 6mmX50mmX0.6mm 2
67-X25045-0E0 SPRING KNOB 1 FOR POWER KNOB
36-DEG290-XX1 DEGAUSSING COIL 3100MM 1
46-27580H-02X HS 2P22 600/7 TJC3-2Y 1 P602H
46-27580H-02X HS 2P22 600/7 TJC3-2Y 1 P601H
54-113970-0U0 PVC TUBE #5 L=ROLL 0.32 FOR SPK CONNECTORS
42-61308F-BX2 SPEAKER 8 OHM 8W 613 1 SP601
42-61308F-BX2 SPEAKER 8 OHM 8W 613 1 SP602
57-10654X-00F cable ties　(2.5mmX95mm) 7
62-216780-00D PLATIC TAPE 12" 1
48-LOC002-XX0 SW. DOOR LOCK PR5 1
08-2922XE-IR1 ASS'Y - RECEIVE BD 1
11-SA1015-YBX TRANSISTOR 2SA1015Y 1 Q081
14-LED05R-XX1 LED RED FB205 1 D080
18-CB0470-JNX RES. C.F. 47 OHM 1/6W +/-5% 1 R089
18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R090
40-2922AE-IRA P.C.B. IR RECEIVE BD 1

11

Item No. Description Quantity Req. Designator Remarks

41-WJ0060-B00 WIRE BARE JUMPER 6mm 1 J083
41-WJ0075-B00 WIRE BARE JUMPER 7.5MM 1 J085
46-33079W-04X PIN BASE *4 TJC3-4A 1 P005A
62-388160-0HA LED BRACKET 1
62-388170-0HA BRACKET 1
63-B30100-BT4 S/T SCREW B 3 X 10 BT 2 FOR REMOTE CONTROL.PCB
25-BCB470-M1X CAP. ELEC 47 UF 16V +/-20% 1 C080
11-C124ES-0BX TRANSISTOR PDTC124ES (NPN) 1 Q082
18-CB0223-JNX RES. C.F. 22k OHM 1/6W +/-5% 1 R091
02-IRR001-XX1 IR RECEIVER MODULE HRM380017 1 IR001
08-29224E-MA2 ASS'Y- MAIN BD 1
10-0BY228-F0X DIODE BY228 1 D411
10-0FR104-FBX DIODE FR104 (FAST RECTIFIER) 1 D412
10-0FR104-FBX DIODE FR104 (FAST RECTIFIER) 1 D421
10-0FR104-FBX DIODE FR104 (FAST RECTIFIER) 1 D441
10-0FR104-FBX DIODE FR104 (FAST RECTIFIER) 1 D431
10-1N4001-EBX DIODE 1N4001 (RECTIFIER) 1 D301
10-1N4148-ABX DIODE 1N4148 (SWITCHING) 1 D201
10-1N4148-ABX DIODE 1N4148 (SWITCHING) 1 D203
10-1N4148-ABX DIODE 1N4148 (SWITCHING) 1 D601
10-1N4148-ABX DIODE 1N4148 (SWITCHING) 1 D602
10-1N4148-ABX DIODE 1N4148 (SWITCHING) 1 D603
10-1N4148-ABX DIODE 1N4148 (SWITCHING) 1 D202
10-1N4148-ABX DIODE 1N4148 (SWITCHING) 1 D204
10-1N4148-ABX DIODE 1N4148 (SWITCHING) 1 D205
10-79C5V1-DBX DIODE ZENER 5V1 1/2W 5% 1 D001
10-79C8V2-DBX DIODE ZENER 8V2 1/2W 5% 1 D303
11-630MFP-0AX TRANSISTOR IRF630MFP 1 Q414
11-C124ES-0BX TRANSISTOR PDTC124ES (NPN) 1 Q602
11-SA1015-YBX TRANSISTOR 2SA1015Y 1 Q008
11-SA1015-YBX TRANSISTOR 2SA1015Y 1 Q215
11-SA1015-YBX TRANSISTOR 2SA1015Y 1 Q412
11-SA1015-YBX TRANSISTOR 2SA1015Y 1 Q413
11-SA1015-YBX TRANSISTOR 2SA1015Y 1 Q601
11-SA1015-YBX TRANSISTOR 2SA1015Y 1 Q912

12

Item No. Description Quantity Req. Designator Remarks

11-SA1015-YBX TRANSISTOR 2SA1015Y 1 Q915
11-SA1015-YBX TRANSISTOR 2SA1015Y 1 Q916
11-SC1815-YBX TRANSISTOR 2SC1815Y 1 Q003
11-SC1815-YBX TRANSISTOR 2SC1815Y 1 Q007
11-SC1815-YBX TRANSISTOR 2SC1815Y 1 Q202
11-SC1815-YBX TRANSISTOR 2SC1815Y 1 Q204
11-SC1815-YBX TRANSISTOR 2SC1815Y 1 Q451
11-SC1815-YBX TRANSISTOR 2SC1815Y 1 Q910
11-SC1815-YBX TRANSISTOR 2SC1815Y 1 Q911
11-SC1815-YBX TRANSISTOR 2SC1815Y 1 Q913
11-SC1815-YBX TRANSISTOR 2SC1815Y 1 Q914
11-SC1815-YBX TRANSISTOR 2SC1815Y 1 Q909
11-SC2482-0BX TRANSISTOR 2SC2482 1 Q401
11-SC3779-DBX TRANSISTOR 2SC3779D (RF AMPL) 1 Q101
11-SD2539-0AX TRANSISTOR 2SD2539 (HORIZ O/P) 1 Q411
13-000040-52P IC 4052 1 IC901
13-000040-52P IC 4052 1 IC902
13-00M24C-08P IC EEPROM 8K M24C08 1 IC001
13-0TDA81-72S IC TDA8172 1 IC301
13-NJW113-6LP IC NJW1136L 1 IC601
13-TDA894-4JS IC TDA8944J 1 IC602
18-CB0100-JNX RES. C.F. 10 OHM 1/6W +/-5% 1 R204
18-CB0101-JNX RES. C.F. 100 OHM 1/6W +/-5% 1 R213
18-CB0101-JNX RES. C.F. 100 OHM 1/6W +/-5% 1 R203
18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R003
18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R004
18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R023
18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R031
18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R032
18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R106
18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R453
18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R904
18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R906
18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R910
18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R912

13

Item No. Description Quantity Req. Designator Remarks

18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R923
18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R924
18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R925
18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R926
18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R931
18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R950
18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R950A
18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R951
18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R951A
18-CB0103-JNX RES. C.F. 10K OHM 1/6W +/-5% 1 R006
18-CB0103-JNX RES. C.F. 10K OHM 1/6W +/-5% 1 R025
18-CB0103-JNX RES. C.F. 10K OHM 1/6W +/-5% 1 R026
18-CB0103-JNX RES. C.F. 10K OHM 1/6W +/-5% 1 R033
18-CB0103-JNX RES. C.F. 10K OHM 1/6W +/-5% 1 R035
18-CB0103-JNX RES. C.F. 10K OHM 1/6W +/-5% 1 R043
18-CB0103-JNX RES. C.F. 10K OHM 1/6W +/-5% 1 R227
18-CB0103-JNX RES. C.F. 10K OHM 1/6W +/-5% 1 R246
18-CB0103-JNX RES. C.F. 10K OHM 1/6W +/-5% 1 R314
18-CB0103-JNX RES. C.F. 10K OHM 1/6W +/-5% 1 R607
18-CB0103-JNX RES. C.F. 10K OHM 1/6W +/-5% 1 R054
18-CB0103-JNX RES. C.F. 10K OHM 1/6W +/-5% 1 R224
18-CB0103-JNX RES. C.F. 10K OHM 1/6W +/-5% 1 R305
18-CB0104-JNX RES. C.F. 100K OHM 1/6W +/-5% 1 R034
18-CB0104-JNX RES. C.F. 100K OHM 1/6W +/-5% 1 R619
18-CB0104-JNX RES. C.F. 100K OHM 1/6W +/-5% 1 R943
18-CB0104-JNX RES. C.F. 100K OHM 1/6W +/-5% 1 R235
18-CB0104-JNX RES. C.F. 100K OHM 1/6W +/-5% 1 R236
18-CB0104-JNX RES. C.F. 100K OHM 1/6W +/-5% 1 R907
18-CB0121-JNX RES. C.F. 120 OHM 1/6W +/-5% 1 R217
18-CB0123-JNX RES. C.F. 12k OHM 1/6W +/-5% 1 R937
18-CB0123-JNX RES. C.F. 12k OHM 1/6W +/-5% 1 R413
18-CB0151-JNX RES. C.F. 150 OHM 1/6W +/-5% 1 R102
18-CB0151-JNX RES. C.F. 150 OHM 1/6W +/-5% 1 R108
18-CB0151-JNX RES. C.F. 150 OHM 1/6W +/-5% 1 R228
18-CB0153-JNX RES. C.F. 15k OHM 1/6W +/-5% 1 R009

14