TEAC CTM-5110-H Service manual

TEAC

SERVICE MANUAL

CTM5110H

1. Caution……………………………………………………………2

2. Specification………………………………………………………6

3. BOM List ……………………… ……………...............................9

4. Alignment Procedure………………………………………….…29

5. Block Diagram……………………………………………………36

6. Schematic Diagram………………………………………………37

7. PCB Layout………….……………………………………………38

8. Explode Diagram…….……………………………………………39

This manual is the latest at the time of printing, and does not

include the modification which ma

the constant improvement of product.

be made after the printing, b

CAUTION:

Use of controls, adjustments or procedures other than those specified herein may result in hazardous radiation exposure.

CAUTION: T O REDUCE THE RISK OF

CAUTION

RISK RISK OF OF ELECTRIELECTRICC

SHOCK SHOCK DO DO NOT NOT OPEN.OPEN.

The lighting flash with arrowhead symbol, with an equilateral triangle is intended to alert the user to the presence of uninsulated voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to the person.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

ELECTRICAL SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

dangerous

WARNING: TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT

EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

IMPORTANT SAFETY INSTRUCTIONS

CAUTION:

Read all of these instructions. Save these instructions for later use . Follow all Warnings and Instructions marked on the audio equipment.

1. Read Instructions- All the safety and operating instructions should be read before the product is operated.

2. Retain Instructions- The safety and operating instructions should be retained for future reference.

3. Heed Warnings- All warnings on the product and in the operating instructions should be adhered to.

4. Follow Instructions- All operating and use instructions should be followed.

FOR YOUR PERSONAL SAFETY

1. When the power cord or plug is damaged or frayed, unplug this television set from the wall outlet and refer servicing to qualified service personnel.

2. Do not overload wall outlets and extension cords as this can result in fire or electric shock.

3. Do not allow anything to rest on or roll over the power cord, and do not place the TV where power cord is subject to traffic or abuse. This may result in a shock or fire hazard.

4. Do not attempt to service this television set yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

5. Never push objects of any kind into this television set through cabinet slots as they may touch dangerous voltage points or shor t out parts that could result in a fire or electric shock. Never spill liquid of any kind on the television set.

6. If the television set has been dropped or the cabinet has been damaged, unplug this television set from the wall outlet and refer servicing to qualified service personnel.

7. If liquid has been spilled into the television set, unplug this television set from the wall outlet and refer servicing to qualified service personnel.

8. Do not subject your television set to impact of any kind. Be particularly careful not to damage the picture tube surface.

9. Unplug this television set from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

10.1. Do not place this television set on an unstable cart, stand, or table. The television set may fall, causing serious injury to a child or an adult, and serious damage to the appliance. Use only with a cart or stand recommended by the manufacturer, or sold with the television set. Wall or shelf mounting should follow the manufacturer s instructions, and should use a mounting kit approved by the manufacturer.

10.2. An appliance and car t combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

PROTECTION AND LOCATION OF YOUR SET

11. Do not use this television set near water ... for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a

wet basement, or near a swimming pool, etc. Never expose the set to rain or water. If the set has been exposed to rain or water, unplug the set from the wall outlet and refer servicing to qualified service personnel.

12. Choose a place where light (artificial or sunlight) does not shine directly on the screen.

13. Avoid dusty places, since piling up of dust inside TV chassis may cause failure of the set when high humidity persists.

14. The set has slots, or openings in the cabinet for ventilation purposes, to provide reliable operation of the receiver, to protect it from overheating. These openings must not be blocked or covered.

Never cover the slots or openings with cloth or other material. Never block the bottom ventilation slots of the set by placing it on a bed, sofa, rug, etc. Never place the set near or over a radiator or heat register. Never place the set in enclosure, unless proper ventilation is provided.

a built-in

PROTECTION AND LOCATION OF YOUR SET

15.1. If an outside antenna is connected to the television set, be sure the antenna system is grounded so as to provide some

protection against voltage surges and built up static charges, Section 810 of the National Electrical Code, NFPA No. 70-1975, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrode, and requirements for the grounding electrode.

EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE INSTRUCTIONS

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONALELECTRICAL CODE

ANTENNA LEAD- INWIRE

GROUND CLAMP

ELECTRIC SERVICE

EQUIPMENT

NEC-NATIONALELECTRICAL CODE

ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)

GROUNDING CONDUCTORS (NECSECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250. PARTH)

15.2. Note to CATV system installer : (Only for the television set with CATV reception)

This reminder is provided to call the CATV system attention to Article 820-40 of the NEC that provides

installer s guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

16. An outside antenna system should not be located in the vicinity of overhead power lines or other electric lights or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

17. For added protection for this television set during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage due to lightning and power-line surges.

OPERATION OF YOUR SET

18.

This television set should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply at your home, consult your television dealer or local power company. For television sets designed to operate from batter y power, refer to the operating instructions.

19. If the television set does not operate normally by following the operating instructions, unplug this television set from the wall outlet and refer servicing to qualified service personnel. Adjust only those controls that are covered in the operating instructions as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the television set to normal operation.

20. When going on a holiday : If your television set is to remain unused for a period of time, for instance, when you go on a holiday, turn the television set and unplug the television set from the wall outlet.

off

IF THE SET DOES NOT OPERATE PROPERLY

21. If you are unable to restore normal operation by following the detailed procedure in your operating instructions, do not attempt any further adjustment. Unplug the set and call your dealer or service technician.

22. Whenever the television set is damaged or fails, or a distinct change in performance indicates a need for service, unplug the set and have it checked by a professional service technician.

23. It is normal for some TV sets to make occasional snapping or popping sounds, particularly when being turned on or off. If the snapping or popping is continuous or frequent, unplug the set and consult your dealer or service technician.

FOR SERVICE AND MODIFICATION

24. Do not use attachments not recommended by the television set manufacturer as they may cause hazards.

25. When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.

26. Upon completion of any service or repairs to the television set, ask the ser vice technician to perform routine safety checks to determine that the television is in safe operating condition.

PFS2 FORMAT-1 Report

play

ype

(

g (

)

guag

Date: 2003-9-16 15:12

ProductView......:

ort by............:

Specs / Products

MasterData Customer Id Version Status Brand EAN UPC Rece

tion +Tunin +Tunin +Tunin +Fre +Channels +IF Fre +TV Systems Off Ai +Add Systems Ext In

+TV S +Sound S Picture - Processin +Scan +Scan Modes +Wide Screen Switchin +Combfilter +Picture Control

+Pict Enhancement +Pict Noise Reduction Picture - Dis +Display T +Screen Format +Size +Deflection S +Tube Technology (CRT onl +CRT Defl +CRT Gun +CRT Ma +Resolution +Coatin +White Point Sound +RMS Power Intern +RMS Power Extern +Surround Sound +Sound Features +Sound Control Sound - S +S +S +S User Interface +Interface Name +Voice Control +Menu +Menu Colours +Menu Lan +Special Features

+O +PP Features +Tuning/Install Features

+Clock/Timer Functions

- presets/channels

- technolo

- Indication

Bands

stems Multi

stems

Visual)" - size/vis. cm

stem (CRT onl

n field

only for D.V. sets

eakers eaker configuration eakers used eaker Size

erational Features

Product:

CT-M5110H

TEAC AUSTRALIA PTY LTD

0.1

New

TEAC

\ \

100

VST

UVSH

100

PAL B/G

NTSC 3.58, NTSC 4.43, NTSC

Play Back, PAL 60

PAL-Multi

AV Stereo

Standard

4;3

Brightness, Colour, Contrast, Color Temperature, Hue, Sharpness Cont Var, Smart Pict. 4 Modes

Black Stretch

DV - CRT - RF 4:3 21"

Black Matrix, Iron

Stand Gun Neutral

Mute Volume

Normal

L01- Full Interface

Cursor Control

English No signal Auto Standby,Timer Power ON/OFF, Favorite Channel, Sleep timer, Game, Calendar, Notebook, Hotel lock , Auto Search

Auto Store, Factory Mode, Fine Tuning, Manual Search/Store, Manual Sort, Service Mode Clock, On/off timer, Sleep timer

2003-9-16 15:13 21166 PFS 1 of 3

Date: 2003-9-16 15:12

(

)

(

)

(

)

(

)

(

)

(

)

(

)

(

)

(

)

ProductView......:

ort by............:

Specs / Products

+Local Controls Front

+Local Controls To +Indicators - screen +Indicators - front +Numb of Loc Cont +Number of Ind. +Local Controls Remote Control Connectors Rea +Scart RGB+Y/C+CVBS +Scart RGB+CVBS +Scart CVBS+Y/C +Com +In Y/C+Cinch +In Y/C+Cinch(CVBS+Mo +In Y/C+Cinch(St +In BNC (CVBS +In Cinch(CVBS+St +In Cinch +Out Cinch(CVBS+St +Out Cinch(CVBS+Mo +Out Cinch Audio Stereo +Out Cinch Audio Mono +Out Cinch Dolb +Out Cinch Subwoofer +Di +Louds +Control Busses +Feature Slot +ITV Smart Port +Terr. Antenna in Guide + IR Blaster Jack Connectors Fron +In Y/C + Cinch(CVBS+St +In Y/C + Cinch Stereo +In Cinch +In Cinch (CVBS+Mo +Headphone Out +Feature Slot Connectors Side +In Y/C + Cinch +In Y/C + Cinch Stereo +In Cinch +IN Cinch +Headphone Out Connectors To +In Cinch (CVBS + St +Headphone Out Connectors Mechanical +Head +Cinch A/V in/out +Cinch Com +Cinch Y/C St +Cabinet Name +Confi +Gra

-Cabinet Colour and Finish

Silver Frost

+Mechanics +S General +Se +Chassis +Software Deliver +Software Version +Mains Volta +Mains Fre +T Power Consum

onent In (Y/U/V) Cinch

CVBS+Mo

Audio Out

eakers

CVBS + St+ Mo

CVBS + Mo

hone

lin

uration

hics/Logo's

eaker Visibilit

ment

uenc

e Mains Cord

incl Mains incl Mains Old

CVBS+St

Surround

CVBS+St

onent

Mode

tion (P)TV in On

Product:

CT-M5110H

Channel +-, Volume +-, TV/AV,MENU, Power Switch,

RC Recvd LED, SB LED

7 1

75 Ohms (IEC type)

21166

Standard

Standard 4:3 M28

240V

50Hz

2003-9-16 15:13 21166 PFS 2 of 3

Date: 2003-9-16 15:12

)

quip

ging

guag

quip

ging

ype

(

ype

)

ProductView......:

ort by............:

Specs / Products

Power Consumption SB in Watts Power Consum +Power in "ON" for +Power in Standb +Power in "OFF" for Wei Weight (P)TV (excl. Package Weight AVUnit excl Packagin +INDICATION on BACKCOVE +Channel Final E +Packa +Documents and manuals +Lan +Cables Su +Antenna Su +Stand Su +Aux E Packa Packa Packa Miscellaneous +EAN Indication +A +Tests +Local Inte

+Service Call-Rate PIP/POP +T +Features Di +Transmission Built-in Data S +Text Standard + +Nbr bck +Text Technolo +Di +Program Guide Built-in Clock/Timer +T +Features Built-in Radio +T Built-in PC displa +PC Synch +PC Control Built-in DVD drive +T +T +Version of Deck Phased Out Items +Tuner/Frontend +Sensitivit +CRT EHT +Li +Accoun +XX(Radio Antenna in +Non Volatile Memor +In Y/C + Cinch(CVBS+Mo Version of deck

ht (P)TV (incl. Packagin

ment

robation

arious Perf. Param.

ital Reception

Tele)text Features

ital Data handlin

e of Medium e of Dec

htning Protection

tion Semi SB in W

for

- methods

es DFU

lied

m Supplied

- width cm

- height cm

- depth cm

ration

stem

rnd page / Mem Size

Product:

CT-M5110H

Less then 3W

No No No

2003-9-16 15:13 21166 PFS 3 of 3

Item No. Description Quantity Req. Designator Remarks 08-HS46F0-M28A ASS'Y - IR HANDSET 1 13-00AS12-13B IC AS1213B 1 IC1501 14-IRE05B-XX0 IR EMITTING DIODE TSAL6200 1 D1501 18-CB0221-JNX RES. C.F. 220 OHM 1/6W +/-5% 1 R1502 18-CB0229-JNX RES. C.F. 2.2 OHM 1/6W +/-5% 1 R1501 25-HBB479-M1X CAP. ELEC 4.7 UF 10V +/-20% 1 C1502 26-EBP101-JCX CAP. CER 100PF 50V +/-5% CH 1 C1503 26-EBP101-JCX CAP. CER 100PF 50V +/-5% CH 1 C1504 40-113SLF-RMB P.C.B. REMOTE HANDSET BD 1 41-WJ0070-B00 WIRE BARE JUMPER 7MM 1 J1501 45-COS455-KY1 CERAMIC RESONATOR 455KHz 1 X1501 49-HS46F0-00X RUBBER PAD KEYS 1 55-HS46FB-0HA CASE LOWER - REMOTE HANDSET 1 55-HS46FD-0HA DOOR BATT. - REMOTE HANDSET 1 55-HS46FT-0HA CASE UPPER - REMOTE HANDSET 1 58-HS46F3-7UI INLAY REMOTE HANDSET 1 63-B26060-BT2 S/T SCREW B 2.6 X 6 BT 1 67-X26968-0E2 BATT. TERMINAL (+/-) 1 67-X31028-0E2 SPRING - BATTERY (-) 1 67-X31029-0E2 SPRING - BATTERY (+) 1 74-009022-60C POLYBAG HANDSET (9CMX22CM) 1 11-0BC337-0BX TRANSISTOR (NPN) BC337-40 1 Q1501 08-02135H-CRY ASS'Y - CRT BD 1 10-1N4148-ABX DIODE 1N4148 (SWITCHING) 1 D502 10-1N4148-ABX DIODE 1N4148 (SWITCHING) 1 D501 11-SA1015-YBX TRANSISTOR 2SA1015Y 1 Q510 11-SC2482-0BX TRANSISTOR 2SC2482 1 Q501 11-SC2482-0BX TRANSISTOR 2SC2482 1 Q502 11-SC2482-0BX TRANSISTOR 2SC2482 1 Q503 18-CB0101-JNX RES. C.F. 100 OHM 1/6W +/-5% 1 R501 18-CB0101-JNX RES. C.F. 100 OHM 1/6W +/-5% 1 R504 18-CB0101-JNX RES. C.F. 100 OHM 1/6W +/-5% 1 R507 18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R522 18-CB0272-JNX RES. C.F. 2.7k OHM 1/6W +/-5% 1 R524 18-CB0472-JNX RES. C.F. 4.7k OHM 1/6W +/-5% 1 R502 18-CB0472-JNX RES. C.F. 4.7k OHM 1/6W +/-5% 1 R505

Item No. Description Quantity Req. Designator Remarks 18-CB0472-JNX RES. C.F. 4.7k OHM 1/6W +/-5% 1 R508 18-CB0681-JNX RES. C.F. 680 OHM 1/6W +/-5% 1 R525 18-CB0681-JNX RES. C.F. 680 OHM 1/6W +/-5% 1 R526 18-CB0681-JNX RES. C.F. 680 OHM 1/6W +/-5% 1 R527 18-CB0681-JNX RES. C.F. 680 OHM 1/6W +/-5% 1 R523 18-CB0751-JNX RES. C.F. 750 OHM 1/6W +/-5% 1 R503 18-CB0751-JNX RES. C.F. 750 OHM 1/6W +/-5% 1 R506 18-CB0751-JNX RES. C.F. 750 OHM 1/6W +/-5% 1 R509 18-CD0104-JNX RES. C.F. 100K OHM 1/4W +/-5% 1 R521 18-FE0272-JNX RES. M.O. 2.7K OHM 1/2W +/-5% 1 R514 18-FE0272-JNX RES. M.O. 2.7K OHM 1/2W +/-5% 1 R515 18-FE0272-JNX RES. M.O. 2.7K OHM 1/2W +/-5% 1 R518 18-FG0153-JHX RES. M.O. 15k OHM 2W +/-5% 1 R510 18-FG0153-JHX RES. M.O. 15k OHM 2W +/-5% 1 R511 18-FG0153-JHX RES. M.O. 15k OHM 2W +/-5% 1 R512 26-EBP103-ZFX CAP. CER 0.01UF 50V +80/-20% F 1 C507 26-EBP181-JCX CAP. CER 180PF 50V +/-5% CH 1 C510 26-EBP181-JCX CAP. CER 180PF 50V +/-5% CH 1 C511 26-EBP181-JCX CAP. CER 180PF 50V +/-5% CH 1 C512 26-EBP681-JCX CAP. CER 680 pF 50V +/-5% 1 C501 26-EBP681-JCX CAP. CER 680 pF 50V +/-5% 1 C502 26-EBP681-JCX CAP. CER 680 pF 50V +/-5% 1 C503 26-AIM103-KBX CAP. CER 0.01UF 500V +/-10% B 1 C504 26-AMK221-KBX CAP. CER 220PF 2KV +/-10% B 1 C505 26-EBP103-ZFX CAP. CER 0.01UF 50V +80/-20% F 1 C514 35-139730-00X FERR. BEAD BF60 2 FOR C514 (L505 & L506) 40-02135S-CRD P.C.B. CRT BD 1 41-WJ0050-B00 WIRE BARE JUMPER 5MM 1 FOR Q509 (B - E) 41-WJ0050-B00 WIRE BARE JUMPER 5MM 1 FOR Q507 (B - E) 41-WJ0050-B00 WIRE BARE JUMPER 5MM 1 FOR Q505 (B - E) 41-WJ0075-B00 WIRE BARE JUMPER 7.5MM 1 J502 41-WJ0075-B00 WIRE BARE JUMPER 7.5MM 1 J503 41-WJ0100-B00 WIRE BARE JUMPER 10MM 1 J501 41-WJ0100-B00 WIRE BARE JUMPER 10MM 1 J504 46-10967W-01X PIN BASE *1 TJC1-1A 1 P503 46-30615H-04X HS 4P24 460 F/W TJC3-4Y/SCN-4 1 P502 FOR M. BD P402

Item No. Description Quantity Req. Designator Remarks 46-28816H-05X HS 5P24 500 TJC3-5Y/SCN-5Y 1 P501 FOR M. BD P201 25-BCB221-M1X CAP. ELEC 220 UF 16V +/-20% 1 C508 47-CRT004-XX0 CRT SOCKET GZS10-2-108 1 FOR CRT 41-WJ0075-B00 WIRE BARE JUMPER 7.5MM 1 J505 08-0D166H-AVY ASS'Y - AV BD 1 40-21166F-SIA P.C.B. SIDE AV BD 1 46-30790H-06X HS 6P24 400 TJC3-6Y/SCN-6Y 1 P1104B FOR M.BD P904 47-RCA001-XX0 RCA SOCKET AV-8.4-6 (RED) 1 P1103 47-RCA002-XX0 RCA SOCKET AV-8.4-6 (WHITE) 1 P1102 47-RCA003-XX0 RCA SOCKET AV-8.4-6 (YELLOW) 1 P1101 08-0D166H-KEY ASS'Y - KEY BD 1 18-CB0152-JNX RES. C.F. 1.5k OHM 1/6W +/-5% 1 R022A 18-CB0182-JNX RES. C.F. 1.8K OHM 1/6W +/-5% 1 R023A 18-CB0272-JNX RES. C.F. 2.7k OHM 1/6W +/-5% 1 R024A 18-CB0432-JNX RES. C.F. 4.3K OHM 1/6W +/-5% 1 R025A 18-CB0622-JNX RES. C.F. 6.2k OHM 1/6W +/-5% 1 R026A 46-38628H-02X HS 2P 2468#24 850 TJC3-2Y/JC25-2Y 1 P001A FOR M.BD P001 48-TAC001-XX0 TACT SWITCH 1 S001A 48-TAC001-XX0 TACT SWITCH 1 S002A 48-TAC001-XX0 TACT SWITCH 1 S003B 48-TAC001-XX0 TACT SWITCH 1 S004A 48-TAC001-XX0 TACT SWITCH 1 S005A 48-TAC001-XX0 TACT SWITCH 1 S006A 40-21166H-KEB P.C.B. KEY BD 1 08-0D166H-PW2 ASS'Y - POWER PARTS (AUST,220UF) 1 10-0FR104-FBX DIODE FR104 (FAST RECTIFIER) 1 D830 10-0FR104-FBX DIODE FR104 (FAST RECTIFIER) 1 D802 10-0FR104-FBX DIODE FR104 (FAST RECTIFIER) 1 D833 10-1N4148-ABX DIODE 1N4148 (SWITCHING) 1 D805 10-1SS136-ABX DIODE 1SS136 1 D804 10-1SS136-ABX DIODE 1SS136 1 D835 10-79C8V2-DBX DIODE ZENER 8V2 1/2W 5% 1 D839 10-HER108-FBX DIODE HER108 1 D806 10-HS16VC-DBX DIODE 500mW 16HSC 1 D838 10-HS6V2B-DBX DIODE 6V2 500mW 1 D840 11-SC1815-YBX TRANSISTOR 2SC1815Y 1 Q832

Item No. Description Quantity Req. Designator Remarks 11-SC1815-YBX TRANSISTOR 2SC1815Y 1 Q831 11-SC2688-LAX TRANSISTOR 2SC2688L (NPN) 1 Q830 11-SK2996-0AX TRANSISTOR 2SK2996 (MOS) 1 Q801 13-0HPC92-2CP PHOTO COUPLER HPC922-C 1 IC802 13-44608P-40P IC MC44608P40 1 IC801 18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R809 18-CB0103-JNX RES. C.F. 10K OHM 1/6W +/-5% 1 R844 18-CB0332-JNX RES. C.F. 3.3k OHM 1/6W +/-5% 1 R834 18-CB0333-JNX RES. C.F. 33K OHM 1/6W +/-5% 1 R838 18-CB0362-JNX RES. C.F. 3.6K OHM 1/6W +/-5% 1 R807 18-CB0472-JNX RES. C.F. 4.7k OHM 1/6W +/-5% 1 R806 18-CB0622-JNX RES. C.F. 6.2k OHM 1/6W +/-5% 1 R850 18-CD0123-JNX RES. C.F. 12K OHM 1/4W +/-5% 1 R804A 18-CD0220-JNX RES. C.F. 22 OHM 1/4W +/-5% 1 R811A 18-CD0221-JNX RES. C.F. 220 OHM 1/4W +/-5% 1 R833 18-CD0392-JNX RES. C.F. 3.9K OHM 1/4W +/-5% 1 R835 18-CD0471-JNX RES. C.F. 470 OHM 1/4W +/-5% 1 R811 18-CE0479-JNX RES. C.F. 4.7 OHM 1/2W +/-5% 1 R832 18-CE0563-JNX RES. C.F. 56k OHM 1/2W +/-5% 1 R831 18-DD0104-FNX RES. M.F. 0.1M OHM 1/4W +/-1% 1 R804 18-FG0153-JHX RES. M.O. 15k OHM 2W +/-5% 1 R837 18-GJ0103-KTX RES. CEMENT 10K OHM 5W +/-10% 1 R836 18-GJ0223-KTX RES. WIRE ROUND 5W 22K OHM +/-10% 1 R808 18-KF0825-JH3 RES. H.VOLT.CC 8.2M OHM 1W +/-5% 1 R812 20-TR103H-5CX TRIMMER B10K HORIZ TYPE 1 VR830 22-NTC479-XX0 NTC 4.7 OHM +/-18% NTC4.7D2-14 1 RT802 25-382890-M1X CAP. ELEC 150UF 400V +/-20% 30X30 1 C806 25-BCA102-M1X CAP. ELEC 1000 UF 16V +/-20% 1 C849 25-BEB100-M1X CAP. ELEC 10 UF 35V +/-20% 1 C812 25-BJG101-M1X CAP. ELEC 100 UF 160V +/-20% 1 C835 26-ABC221-JZX CAP. CER 220 PF 50V +/-5% SL 1 C841 26-AGK221-KRX CAP. CER 220 PF 250V +/-10% 1 C830 26-AIC472-KBX CAP. CER 4700 PF 500V +/-10% B 1 C807 26-AIC472-KBX CAP. CER 4700 PF 500V +/-10% B 1 C808 26-AIM103-KBX CAP. CER 0.01UF 500V +/-10% B 1 C834 26-AIM103-KBX CAP. CER 0.01UF 500V +/-10% B 1 C805

+ 27 hidden pages