TDK FReta User Manual

℡ (877) 498

-

0099

48V Input, 17A Output

Data Sheet: FReta iEB Series –Single Output Eighth Brick Bus Converter

Standard Features:

• Size – 58.4mm x 22.9 mm x 8.5
mm (2.30 in. x 0.90 in. x 0.34 in.)

• Thru-hole pins 3.68 mm (0.145”)

• High efficiency – greater than 94%

• 2250Vdc isolation voltage

• Meets basic insulation spacing

requirements

• Constant switching frequency

• Industry Standard Footprint

• Remote on/off (positive logic)

• Auto-recovering input over-voltage

protection

• Auto-recovering output over-
current protection

• Auto-recovering output short circuit
protection

• Auto-recovering over-temperature
protection

FReta iEB Series DC/DC Power Modules

The FReta Series offers an industry
standard 150W Eighth brick power module

featuring a high operating efficiency that
results in true useable power. The FReta
modules offer a fixed conversion ratio of
either 4:1 or 5:1.

Optional Features:

• Applying for UL 60950 (U.S. and
Canada), VDE 0805, CB scheme
(IEC950), CE Mark (EN60950)

• ISO Certified manufacturing
facilities

• Remote on/off (negative logic)

• Short Thru-hole pins 2.79 mm

(0.110”)

• Long Thru-hole pins 5.08 mm
(0.200”)

• Increased operating input voltage
range

Eighth Brick

©2004-2006 TDK Innoveta Inc.
1/24/2008

1/13

℡ (877) 498

-

0099

Data Sheet: FReta iEB Series –Single Output Eighth Brick Bus Converter

Ordering information:

Product

Identifier

i E B 48 013 A 120 V -

TDK Innoveta

Package

Size

Eighth­brick

Platform Input

FReta

Voltage

48V -

nominal

Output

Current/

Power

013 – 13.5A
017 – 17A Amps

Output

Units

Main

Output

Voltage

120 – 12V
096 – 9.6V Single

# of

Outputs

Safety

Class

0 00

00 – Standard

Option Table:

Feature

Set

00 X X

01 X X

04 X X

05 X X

Positive Logic

On/Off

Negative Logic

On/Off

0.110” Pin
Length

0.200” Pin
Length

0.145” Pin
Length

Product Offering:

Code Input Voltage Output Voltage Output Current

iEB48013A120V 42-56V 12V 13.5A 150W 94%

Maximum Output

Power

Feature Set

Efficiency

3320 Matrix Drive Suite 100
Richardson, Texas 75082

Phone [phone] Toll Free
[phone]
Fax [phone] Toll Free
[phone]

[e-mail]
http://www.tdkinnoveta.com/

©2004-2006 TDK Innoveta Inc.
1/24/2008

2/13

℡ (877) 498

-

0099

Data Sheet: FReta iEB Series –Single Output Eighth Brick Bus Converter

Mechanical Specification:

Dimensions are in mm [in]. Unless otherwise specified tolerances are: x.x ± 0.5 [0.02], x.xx and x.xxx ± 0.25 [0.010].

Recommended Hole Pattern: (top view)

Pin Assignment:

PIN

1 Vin(+) 4 Vo(-)

2 On/Off 5 Vo(+)

3 Vin(-)

Pin base material is brass with plating; the maximum module weight is 27g (0.95 oz).

FUNCTION PIN FUNCTION

©2004-2006 TDK Innoveta Inc.
1/24/2008

3/13

℡ (877) 498

-

0099

Data Sheet: FReta iEB Series –Single Output Eighth Brick Bus Converter

Absolute Maximum Ratings:

Stress in excess of Absolute Maximum Ratings may cause permanent damage to the device

Characteristic Min Max Unit Notes & Conditions

Continuous Input Voltage -0.5 75 Vdc

Transient Input Voltage --- --- Vdc

Isolation Voltage --- 2250 Vdc Basic insulation

Storage Temperature -55 125 ˚C

Operating Temperature Range (Tc)

*Engineering estimation

-40 120* ˚C

Measured at the location specified in the thermal
measurement figure. Maximum temperature varies
with model number, output current, and module
orientation – see curve in thermal performance
section of the data sheet.

©2004-2006 TDK Innoveta Inc.
1/24/2008

4/13