TC Electronic Zeus User manual
Quick Start Guide
(4) (6)
(7)
(9)
(5)
(8)
ZEUS DRIVE OVERDRIVE
Legendary Dynamic Overdrive Boost Pedal with 2 Clipping Modes and
Optional Buered Bypass
(1)
(2) (3)
1. OUT – Send the sig nal to other pedals or a g uitar
amp via ¼" cable.
2. 9V DC – Connect a s tandard 9 V power supp ly
(not included). The pedal does not accept batteries.
3. IN – Connect you r guitar via ¼" cable.
4. DRIVE – Adjusts mix an d clipping of drive c ircuit.
5. LED – Lights whe n the pedal is engaged .
6. VOLUME – Adjusts t he output level whe n the
pedal is eng aged.
7. FAT – Boos ts the low frequ encies and reshap es the
mids, givi ng a fatter tone.
8. TREBLE – Active tone co ntrol for the high
frequencies. The center position is neutral,
turning c lockwise boo sts highs, and tur ning
counterclockwise attenuates highs.
9. FOOTSWITCH – Press to engage or byp ass
the pedal.
Note – ZEUS Drive has 2 o ptions for bypas s type buere d bypass and true by pass. Remove 4 screw s on
the side of th e pedal and input /output nu ts to access the
internal by pass type sel ector switch.
Slide sw itch to the ri ght for True B ypass
Slide sw itch to the le ft for Bu ered Byp ass
Specications
Connectors
Input ¼" TS, unbalanced
Impedance 1 MΩ
Output ¼" TS, unbalanced
Power input
Physical
Dimensions
Weight 0.29 kg (0.64 l bs)
Standard 9 V D C, center neg,
40 mA
99 x 57 x 56 mm
(3.9 x 2.2 x 2.2")
V 1.0
Loading...