Taylor Freezer C712 General Manual

Item No.

C712

®

C712

Soft Serve Freezer

Twist, Pump

Features

Offer all the popular soft serve variations from low or non­fat ice creams to custards, yogurt and sorbet. Serve two
separate soft serve flavors, or an equal combination of both
in a twist.

Freezing Cylinder

Two, 3.4 quart (3.2 liter).

Mix Hopper

Two, 20 quart (18.9 liter). Simplified air/mix pumps deliver the precise
amount of air and mix to the freezing cylinders, and reduces operator parts.
Separate hopper refrigeration (SHR) maintains mix below 41ºF (5ºC) during
Auto and Standby modes.

Indicator Lights

Digital readout displays hours since last brush cleaning to assure product
safety. Mix Low light alerts operator to add mix. Audible alarm may be
enabled to sound when mix is low. When the Mix Out light flashes, the unit
shuts down automatically to prevent damage.

Integrated Syrup Rail Option - 2 room temperature with lids & ladles, 2

heated with syrup pumps

Touch Screen Controls

Microprocessor touch controls are embedded in durable tempered glass
panel. Multiple languages are selectable. Viscosity is continually measured
to dispense consistent quality soft serve desserts. Temperatures in the
hoppers or freezing cylinders may be displayed at any point of operation, in
either Fahrenheit or Celsius. Draw counter allows operator to view number of
servings dispensed.

Standby

During long no-use periods, the standby feature maintains safe product
temperatures in the mix hopper and freezing cylinder.

Two Locking Casters

Front casters have a locking feature for operators to keep equipment in
place. The lock can be released to move the equipment for cleaning.

Door Interlock System

Protects the operator from injury as the beater will not operate without the
dispensing door in place.

Freezer Door

A specially designed thermo-plastic door allows quick ejection of product
with a simple movement of the draw handle. Self closing draw handles are
standard.

Rockton, Illinois 61072

800-255-0626

Phone [phone] Fax [phone]

www.taylor-company.com

e-mail: [e-mail]

International Office
Taylor Company S.r.l.
Roma, Italy
Tel: [phone] Fax: [phone]
e-mail: [e-mail]

C712 Soft Serve Freezer

39-11/16

1 (25)

(1008)

36-3/16

(919)

AIR IN
(BOTH

SIDES)

28-1/4

(718)

4-3/4
(121)

9-1/4
(235)

28-9/16

(726)

52-1/2
(1334)

C712

25-7/16

(646)

OUT

22-1/2

(572)

AIR

44-1/2
(1130)

52-1/2
(1334)

57-15/16

(1472)

60

(1524)

1-3/32 (28)

EXHAUST
TOWARDS
FLOOR

NOTE: FIGURES IN PARENTHESES INDICATE MILLIMETERS

ELECTRICAL
HOLE (2)

4-1/32

(102)

7-1/4
(184)

1-3/4 (44)
ELECTRICAL
HOLE

11-1/16

(281)

9-5/16

(237)

TOP VIEW - OPERATOR END

ALL CONNECTIONS LOCATED UNDERSIDE OF BASE

Weights lbs. kgs.

Net 777 352.4
Crated 855 387.8

cu. ft. cu. m.

Volume 68.4 1.94

Dimensions in. mm.

Width 25-7/16 646
Depth 36-3/16 919
Height 60 1524
Floor Clearance 4-3/4 121

*Mounted on standard casters

Electrical Maximum Minimum Poles (P)
Fuse Size Circuit Ampacity Wires (W)

Left Right Left Right

208-230/60/1 Air 35 35 27 25 2P 3W
208-230/60/1 Air, Syrup 40 35 28 25 2P 3W
208-230/60/1 Water 35 35 26 25 3P 4W
208-230/60/3 Air 25 20 19 17 3P 4W
208-230/60/3 Water 25 20 18 17 3P 4W
220-240/50/1 Water 30 25 22 20 2P 3W
380-415/50/3N~ Air 12 10 11 9 4P 5W

This unit may be manufactured in other electrical characteristics. Refer to the
local Taylor Distributor for availability.

(For exact electrical information, always refer to the data label of the unit.)

Bidding Specs
Electrical: Volt Hz ph
Neutral: Yes  No Cooling: Air Water NA

Options:

Taylor Company,

Rockton, Illinois 61072
815-624-8333 800-255-0626 Fax [phone]

www.taylor-company.com

Specifications

Electrical

Two dedicated electrical connections are required. See the Electrical chart
for the proper electrical requirements. Manufactured to be permanently
connected. Consult your local Taylor distributor for cord & receptacle
specifications as local codes allow.

Beater Motor

Two, 1.5 HP.

Refrigeration System

Two, 9,500 BTU/hr. R404A.
Separate Hopper Refrigeration (SHR), One, 400 BTU/hr. R134a.
(BTUs may vary depending on compressor used.)

Air Cooled

Minimum 3” (76 mm) around all sides. Install the deflector provided to
prevent recirculation of warm air. Minimum air clearances must be met to
assure adequate air flow for optimum performance.

Water Cooled

Water inlet and drain connections under side of base 1/2” FPT.

Options

• Cone Dispenser

• Drain Adaptor (for ease of rinsing & cleaning)

• Draw Valve Lock Kit

• Faucet

• Hopper Locks

• Hopper Agitators

• Panel Spinner

• Syrup Rail (Integrated)

• Syrup Rail Kit (side mount)

Continuing research results in steady improvements; therefore,

these specifications are subject to change without notice.

062076-ADV 11/11