Taylor Freezer C006 General Manual

C006

FlavorShot Dispenser

Features

Portion controlled flavor dispenser allows the
operator to select the proper amount of nine
flavors, three combinations of selected flavors, and
liquid sugar, for various menu items and sizes.

Convenient Storage

Nine individual tanks store and dispense the various flavors.
Each tank holds 750 ml. Tanks may be refilled through the
lid opening without removing from the cabinet. Each tank is
marked with a fill line. Liquid sugar is drawn from its own
separate container, within 3 feet (0.9 m) of the dispenser.

Controls

Operator selects appropriate flavor or combination flavor,
menu item desired, and serving size from durable touch
screen panel.

Indicator Lights

Power light illuminates when cord is plugged in and power
switch is turned on. Desired flavor and menu item buttons
illuminate when selected. When the level in the tank reaches
the mix low condition, the product light flashes. When the
level in the tank reaches the mix out condition, the product
light flashes faster, and the flavor is locked out until tank is
refilled and reset.

C006

Rockton, Illinois 61072

800-255-0626

Phone [phone] Fax [phone]

www.taylor-company.com

e-mail: [e-mail]

Drip Tray

Cup locator assures proper cup placement for dispensing the
full portion into the cup. Drip tray is easily removable for
cleaning.

International Office
Taylor Company S.r.l.
Roma, Italy
Tel: [phone] Fax: [phone]
e-mail: [e-mail]

C006FlavorShot Dispenser

Weights lbs. kgs.

Net 67 30.4
Crated 72 32.7

C006

Volume 10.2 0.29

Dimensions in. mm.

Width 8-3/4 223
Depth 24 610
Height 25 635
Counter Clearance 4 102

Mounted on standard legs.

Electrical Total Supplied

115 to 250 volt, 50/60, 1 ph 2.0 5-15P

This unit may be manufactured in other electrical characteristics. Refer to the
local Taylor Distributor for availability.
(For exact electrical information, always refer to the data label of the unit.)

cu. ft. cu. m.

Amps with NEMA Cord

Specifications

Electrical

One electrical connection is required. See the Electrical chart for the proper
electrical requirements. Manufactured to be cord connected. Consult the
international Taylor distributor for cord & receptacle specifications for 50 Hz.
equipment.

Recommended Clearance

Minimum clearance: 1” (25 mm) at the rear, and 4” (102 mm) underneath..
Minimum air clearances must be met to assure adequate air flow for optimum
performance.

Bidding Specs

Electrical: Volt ___________________ Hz__________ ph _________

Neutral:  Yes No Cooling:  Air  Water  NA

Options:_________________________________________________
_________________________________________________________

Taylor Company

A Division of Carrier Commercial Refrigeration, Inc.
Rockton, Illinois 61072
815-624-8333 800-255-0626 Fax [phone]

www.taylor-company.com

Continuing research results in steady improvements; therefore, these

specifications are subject to change without notice.

Printed in U.S.A.

067198-ADV

2/09