Taylor Freezer 8752P General Manual
Item No.
8752P
Soft Serve Freezer
Single Flavor, Horizon® Mix Delivery System
Features
Offer all the popular soft serve variations from low or non-fat
ice creams to custards, yogurt and sorbet. The Horizon® Mix
Delivery System offers high capacity in a pressurized system
with consistent overrun and simplified operation.
Freezing Cylinder
One, 3.4 quart (3.2 liter).
Refrigerated Mix Storage Cabinet
Lower front mix cabinet is independently refrigerated to maintain mix below
41ºF (5ºC). Door is hinged on the right. One, 15 gallon (57.0 liter) mix tank.
The Horizon® Mix Delivery System delivers the precise amount of air and
mix to the freezing cylinder.
8752P
Indicator Lights
Mix Low light alerts the operator to add mix. When the Mix Out light flashes,
the unit shuts down automatically to prevent damage.
Electronic Controls
Finished product quality is monitored by SoftechTM controls that measure
viscosity.
Standby
During long no-use periods, the standby feature maintains safe product
temperatures in the freezing cylinder.
Horizon Mix Delivery System
Easy to clean and offers reliable overrun control. Simple overrun adjustment
from 25 to 70% (depending on mix formulation). Ability to dispense higher
butterfat or fruit products with pulp.
Two Locking Casters
Front casters have a locking feature for operators to lock to maintain
equipment in place. The locking casters can be released to move the
equipment for cleaning.
Rockton, Illinois 61072
800-255-0626
Phone 815-624-8333 Fax 815-624-8000
www.taylor-company.com
e-mail: info@taylor-company.com
International Office
Taylor Company S.r.l.
Roma, Italy
Tel: +39-06-420-12002 Fax: +39-06-420-12034
e-mail: romeoff@taylor-company.com
8752P Soft Serve Freezer
8752P
Weights lbs. kgs.
Net 659 298.9
Crated 782 354.7
cu. ft. cu. m.
Volume 68.0 1.62
Dimensions in. mm.
Width 20-5/8 524
Depth 36 914
Height 62-15/16 1599
Floor Clearance 4-1/4 108
*Mounted on standard casters
Electrical Maximum Minimum Poles(P)
Fuse Size Circut Ampacity Wires (W)
208-230/60/1 Air 40 30 2P 3W
208-230/60/1 Water 40 29 2P 3W
208-230/60/3 Air 30 23 3P 4W
208-230/60/3 Water 30 23 3P 4W
380-415/50/3N~ Air 15 14 2P 3W
This unit may be manufactured in other electrical characteristics. Refer to the
local Taylor Distributor for availability.
(For exact electrical information, always refer to the data label of the unit.)
Specifications
Electrical
One dedicated electrical connection is required. See the Electrical chart
for the proper electrical requirements. Manufactured to be permanently
connected. Consult your local Taylor distributor for cord & receptacle
specifications as local codes allow.
Beater Motor
One, 1.5 HP.
Refrigeration System
One, 9,500 BTU/hr. R404A.
Mix Cabinet Refrigeration, One, 1,100 BTU/hr. R404A.
(BTUs may vary depending on compressor used.)
Air Cooled
Minimum 3” (76 mm) around all sides and 12” (305 mm) on top. Minimum
air clearances must be met to assure adequate air flow for optimum
performance.
Water Cooled
Water inlet and drain connections under side of base 3/8” FPT.
Options
• Cone Dispenser
• Draw Valve Lock Kit
• Panel Spinner
• Sneeze Guard
• Syrup Rail Kit (side mount)
Bidding Specs
Electrical: Volt Hz ph
Neutral:
Options:
Yes No Cooling: Air Water NA
Continuing research results in steady improvements; therefore,
these specifications are subject to change without notice.
Taylor Company,
Rockton, Illinois 61072
815-624-8333 800-255-0626 Fax 815-624-8000
www.taylor-company.com
052629-ADV 2/12
Loading...