Taylor Freezer 772 General Manual

Item No.

772

Soft Serve Freezer

Two Flavor

Features

Offer all the popular soft serve variations from low or non-fat
ice creams to custards, yogurt and sorbet in two separate
flavors.

Freezing Cylinder

Two, 7 quart (6.6 liter).

Mix Hopper

Two, 20 quart (18.9 liter). Separate hopper refrigeration (SHR) maintains mix
below 41ºF (5ºC) during Auto and Standby modes.

Indicator Lights

Add Mix light alerts operator to add mix.

772

Solid State Controls

Thermistor control precisely monitors temperature to maintain consistent
quality.

Standby

During long no-use periods, the standby feature maintains safe product
temperatures in the mix hopper and freezing cylinder.

Two Locking Casters

Front casters have a locking feature for operators to lock to maintain
equipment in place. The locking casters can be released to move the
equipment for cleaning.

Rockton, Illinois 61072

800-255-0626

Phone [phone] Fax [phone]

www.taylor-company.com

e-mail: [e-mail]

International Office
Taylor Company S.r.l.
Roma, Italy
Tel: [phone] Fax: [phone]
e-mail: [e-mail]

772 Soft Serve Freezer

772

Weights lbs. kgs.

Net 630 285.8
Crated 700 317.5

cu. ft. cu. m.

Volume 46.2 1.3

Dimensions in. mm.

Width 26-7/16 672
Depth 35 889
Height 59-7/8 1521
Floor Clearance 7-1/2 191

*Mounted on standard casters

Electrical Maximum Minimum Poles (P)
Fuse Size Circuit Ampacity Wires (W)
Left Right Left Right

208-230/60/1 Air 35 30 29 25 2P 3W
208-230/60/1 Water 35 30 26 25 2P 3W
208-230/60/3 Air 20 15 18 14 3P 4W
208-230/60/3 Water 20 15 16 14 3P 4W
220-240/50/1 Air 30 25 24 20 2P 3W

This unit may be manufactured in other electrical characteristics. Refer to the
local Taylor Distributor for availability.

(For exact electrical information, always refer to the data label of the unit.)

Bidding Specs
Electrical: Volt Hz ph
Neutral: Yes  No Cooling: Air Water NA

Options:

Specifications

Electrical

Two dedicated electrical connections are required. See the Electrical chart
for the proper electrical requirements. Manufactured to be permanently
connected. Consult your local Taylor distributor for cord & receptacle
specifications as local codes allow.

Beater Motor

Two, 2.0 HP.

Refrigeration System

Two, 9,500 BTU/hr. R404A.
Separate Hopper Refrigeration (SHR), One, 400 BTU/hr. R134a.
(BTUs may vary depending on compressor used.)

Air Cooled

Minimum 3” (76 mm) around all sides. Install the deflector provided to
prevent recirculation of warm air. Minimum air clearances must be met to
assure adequate air flow for optimum performance.

Water Cooled

Water inlet and drain connections under side of base 3/8” FPT.

Options

• Cone Dispenser

• Faucet

• Panel Spinner

• Syrup Rail Kit (side mount)

Continuing research results in steady improvements; therefore,

these specifications are subject to change without notice.

Taylor Company,

Rockton, Illinois 61072
815-624-8333 800-255-0626 Fax [phone]

www.taylor-company.com

051274-ADV 11/11