Taylor Freezer 358 General Manual

Item No. _______________________________

358

Thick Shake Freezer

Features

Serve a wide variety of frozen desserts, like thick shakes and
smoothies, with the assurance of safe temperatures for dairy
products. Direct draw a single flavor, or blend in flavorings
for more variety.

Freezing Cylinder

One, 7 quart (6.6 liter).

Refrigerated Mix Hopper

One, 20 quart (18.9 liter). Refrigerated to maintain mix temperature
below 41ºF (5ºC).

Indicator Lights

If the freezer is out of mix, the Mix Out light will come on, and the
freezer shuts down automatically to prevent damage. Less than one
pint ( .5 liter) is left in the hopper when the mix out system is
activated.

358

Solid State Controls

Thermistor control precisely monitors temperature and maintains
consistent quality in product texture through solid state technology.

Thumb Grip Draw Handle

Draw handle makes dispensing of product easy by squeezing two
levers together.

Fast Ejection

Beater design ejects product quickly to serve customers faster.
Dispense a 16 fl. oz. (473 ml) serving in approximately 3 seconds.

Plastic Hopper Cover

Durable, plastic hopper cover maintains its shape through years of
use.

Rockton, Illinois 61072

800-255-0626

Phone [phone] Fax [phone]

www.taylor-company.com

e-mail: [e-mail]

International Office
Taylor Company S.r.l.
Roma, Italy
Tel: [phone] Fax: [phone]
e-mail: [e-mail]

358Thick Shake Freezer

32-3/16 (81.76)

30 (76.2)

21-1/4 (54.0)

2-5/16

(5.9)

3-3/8

(8.6)

21-1/2

(54.6)

42

(106.7)

53-1/2

(135.9)

3-1/2

(8.9)

30 (76.2)

16

(40.6)

19-3/4 (50.2)

1-1/4

(3.2)

TOP VIEW - OPERATOR END

ALL CONNECTIONS LOCATED UNDERSIDE OF BASE

NOTE:

FIGURES IN PARENTHESES INDICATE MILLIMETERS.

ELECTRICAL

HOLE

4-1/2

(11.4)

358

Weights lbs. kgs.

Net 356 161.5
Crated 400 181.4

cu. ft. cu. m.

Volume 22.3 0.63

Dimensions in. mm.

Width 16 406
Depth 32-3/16 818
Height 55-7/8 1418
Counter Clearance 3-1/2 89

*Mounted on standard casters

Electrical Maximum Minimum Poles (P)

Fuse Size Circuit Ampacity Wires (W)

208-230/60/3 Air 20 16 3P 4W
380-415/50/3N~ Air 9 7 4P 5W

This unit may be manufactured in other electrical characteristics. Refer to the
local Taylor Distributor for availability.
(For exact electrical information, always refer to the data label of the unit.)

Bidding Specs

Electrical: Volt ___________________ Hz__________ ph _________

Neutral:  Yes No Cooling:  Air  Water  NA

Options:_________________________________________________
_________________________________________________________

Specifications

Electrical

One dedicated electrical connection is required. See the Electrical chart for
the proper electrical requirements. Manufactured to be permanently
connected. Consult your local Taylor distributor for cord & receptacle
specifications as local codes allow.

Beater Motor

One, 1.5 HP.

Refrigeration System

One, approximately 9,500 BTU/hr. R404A.
BTUs may vary depending on compressor used.)

Air Cooled

Minimum Clearance: 3” (76 mm) around all sides. Minimum air clearances
must be met to assure adequate air flow for optimum performance.

Options

 Bumper Kit

Continuing research results in steady improvements; therefore, these

specifications are subject to change without notice.

Taylor Company,

A division of Carrier Commercial Refrigeration, Inc.
Rockton, Illinois 61072
815-624-8333 800-255-0626 Fax [phone]

www.taylor-company.com

Printed in U.S.A.

056749-ADV

1/08