Taylor 8752P Specifications

Rockton, Illinois 61072

800-255-0626

Phone [phone] Fax [phone]

www.taylor-company.com

e-mail: [e-mail]

International Office
Taylor Company S.r.l.
Roma, Italy
Tel: [phone] Fax: [phone]
e-mail: [e-mail]

8752P

Item No.

_______________________________

8752P

Offer all the popular soft serve variations from low or non-fat
ice creams to custards, yogurt and sorbet. The Horizon®
Mix Delivery System offers high capacity in a pressurized
system with consistent overrun and simplified operation.

Freezing Cylinder

One, 3.4 quart (3.2 liter).

Refrigerated Mix Storage Cabinet

Lower front mix cabinet is independently refrigerated to maintain
mix below 41ºF (5ºC). Door is hinged on the right. One, 15 gallon
(57.0 liter) mix tank. The Horizon® Mix Delivery System delivers the
precise amount of air and mix to the freezing cylinder.

Indicator Lights

Mix Low light alerts the operator to add mix. When the Mix Out
light flashes, the unit shuts down automatically to prevent damage.

Electronic Controls

Finished product quality is monitored by Softech

TM

controls that

measure viscosity.

Standby

During long no-use periods, the Standby feature maintains safe
product temperatures in the freezing cylinder.

Horizon Mix Delivery System

Easy to clean and offers reliable overrun control. Simple overrun
adjustment from 25 to 70% (depending on mix formulation). Ability
to dispense higher butterfat or fruit products with pulp.

Features

Soft Serve Freezer

Single Flavor, Horizon® Mix Delivery System

8752P

8752PSoft Serve Freezer

Electrical

One dedicated electrical connection is required. See the Electrical chart for
the proper electrical requirements. Manufactured to be permanently
connected. Consult your local Taylor distributor for cord & receptacle
specifications as local codes allow.

Beater Motor

One, 1.5 HP.

Refrigeration System

One, 9,500 BTU/hr. R404A.
Mix Cabinet Refrigeration, One, 1,100 BTU/hr. R404A.
(BTUs may vary depending on compressor used.)

Air Cooled

Minimum 3” (76 mm) around all sides and 12” (305 mm) on top. Minimum
air clearances must be met to assure adequate air flow for optimum
performance.

Water Cooled

Water inlet and drain connections under side of base 3/8” FPT.

Taylor Company,

A Division of Carrier Commercial Refrigeration, Inc.
Rockton, Illinois 61072
815-624-8333 800-255-0626 Fax [phone]

www.taylor-company.com

Printed in U.S.A.

ef

Weights lbs. kgs.

Net 659 298.9
Crated 782 354.7

cu. ft. cu. m.

Volume 68.0 1.62

Dimensions in. mm.

Width 20-5/8 524
Depth 36 914
Height 62-15/16 1599
Floor Clearance 4-1/4 108

*Mounted on standard casters

Bidding Specs

Electrical: Volt ___________________ Hz__________ ph _________

Neutral:  Yes No Cooling:  Air  Water  NA

Options:_________________________________________________
_________________________________________________________

 Cone Dispenser
 Draw Valve Lock Kit
 Panel Spinner
 Sneeze Guard
 Syrup Rail Kit (side mount)

Options

Specifications

052629-ADV

3/06

Continuing research results in steady improvements; therefore, these

specifications are subject to change without notice.

Electrical Maximum Minimum

Fuse Size Circuit Ampacity

208-230/60/1 Air 40 30
208-230/60/1 Water 40 29
208-230/60/3 Air 30 23
208-230/60/3 Water 30 23
380-415/50/3N~ Air 15 14

This unit may be manufactured in other electrical characteristics. R
local Taylor Distributor for availability.
(For exact electrical information, always refer to the data label of the