Taylor 7222F Instruction Manual And Warranty Information
Instruction Manual and Warranty Information
Model # 7222F
IB7222F
32
Smart Scale
with Bluetooth® 4.0 Technology
Body Fat, Body Water, Muscle Mass & Cal-Max™
For service or repair do not return this unit
to the retailer. Contact
TAYLOR Consumer
Relations:
Phone:
1-866-843-3905
Business Hours:
7:30 am – 4:30 pm
(MST)
Monday – Friday
e-mail:
prodsupport@
taylorusa.com
Mobile device not included. FREE APP
Distributed By:
Taylor Precision Products, Inc.
2220 Entrada Del Sol, Suite A
Las Cruces, New Mexico 88001
1-866-843-3905
www.taylorusa.com
MADE IN CHINA.
Five (5) Year Limited Warranty
This scale is warranted against defects in materials of workmanship (excluding
batteries) for ve (5) years for the original purchaser from date of retail
purchase. It does not cover damages or wear resulting from accident, misuse,
abuse, commercial use, or unauthorized adjustment and/or repair. Do not
return to retailer. Should this scale require review (or replacement at our
option) while under warranty, please pack the item in the original packaging
and return it prepaid, along with store receipt showing date of purchase and
a note explaining reason for return to:
Taylor Precision Products, Inc.
2220 Entrada Del Sol, Suite A
Las Cruces, New Mexico 88001
1-866-843-3905
email: www.prodsupport@taylorusa.com
There are no express warranties except as listed above. This warranty gives
you specic legal rights, and you may have other rights which vary from state
to state. For additional product information please contact us through www.
taylorusa.com.
If review is required, do not return to retailer. For information call 1 (866) 8433905 from 7:30 am to 4:30 pm, Mountain Standard Time, Monday through
Friday. To assist us in serving you, please have the model number and date of
purchase available.
Not Legal for trade.
©2014 Taylor Precision Products, Inc. and its afliated companies, all rights
reserved. Taylor® is a registered trademark and Cal-Max™ and SmarTrack™
are a trademarks of Taylor Precision Products, Inc. and its afliated companies.
All rights reserved. 6.14 WC
BODY FAT SCALE WITH BODY FAT, BODY WATER, MUSCLE MASS
AND Cal-Max™
INSTRUCTION MANUAL
Model # 7222F
INTRODUCTION
Thank you for purchasing the Taylor® Smart Scale with Bluetooth® 4.0 technology. You
will now be able to effortlessly measure, track and share health and fitness information.
This instruction manual will guide you through the setup process and provide key
information about the scale itself. Please read it completely and keep it handy for
future reference.
WHAT IS INCLUDED
• Smart Scale with Bluetooth® 4.0 technology
• Instruction Manual
• Quick Use Guide
• Three (3) AAA Batteries
3
The scale uses the method of Bioelectrical Impedance Analysis (BIA) to
estimate body fat, total body water and muscle mass. It sends a harmless
amount of electricity into the body, then estimates from the measured
impedance of the body, the percentage of body fat, percentage total body
water and percentage muscle mass. It is intended for adult use in the home.
INTENDED USE
• Do not use this device if:
• You are pregnant
• You are acutely or chronically ill, suffering from a disease or taking
medications that affect your water levels. The accuracy of readings for these
patients has not been veried.
• You have a pacemaker or any other internal medical device.
• Any information provided by this device is in no way meant to treat, cure or
prevent any disease or illness from happening.
• Specic medical advice should be obtained from a physician.
• Do not disassemble the scale as incorrect handling may cause injury.
• Do not step on the scale when your body or feet are wet, especially after
bathing or showering to prevent slipping.
CAUTION
Table of Contents
INTRODUCTION ........................................................................................………………………………..3
WHAT IS INCLUDED ..................................................................................………………………………..3
INTENDED USE ..........................................................................................………………………………..3
CAUTION .............................................................................................………………....………………..3
PRODUCT DESCRIPTION ..........................................................................………………………………..4
INSTALLING BATTERIES .............................................................................………………………………..5
SETTING UP YOUR SMART SCALE USING BLUETOOTH® 4.0 TECHNOLOGY …………......……………..5
SMART SCALE COMPATIBLE DEVICE REQUIREMENTS .............................………………………………..5
INITIAL PROCEDURES ...............................................................................………………………………..6
- SET UNIT OF MEASUREMENT ................................................................………………….……………..6
- DOWNLOAD SMARTRACK APP AND SET UP USER PROFILE ..............………………………………..6
- SET ACTIVITY LEVEL ...............................................................................………………………………..6
- SET GOAL WEIGHT ................................................................................………………………………..6
EDIT USER PROFILE ...................................................................................………………………………..6
SET UP BLUETOOTH CONNECTION ..........................................................………………………………..7
DELETING A USER PROFILE FROM THE APP .............................................………………………………..7
MEASUREMENT PROCEDURES WITH BLUETOOTH .................................………………………………..8
- TO TAKE A MEASUREMENT ...................................................................………………………………..8
- MEASURING USING AUTO RECOGNITION FEATURE ...........................………………………………..9
- DATA TRANSMISSION FROM SMART SCALE TO MOBILE DEVICE .................…………....…………..9
- VIEWING DATA ON YOUR PERSONAL DEVICE .....................................……………………………..10
- SHARING YOUR DATA .............................................................................……………………………..10
- APP COMPATIBILITY .............................................................................………………………………..10
- MEMORY & STORAGE ..........................................................................………………...……………..10
SETTING UP AND USING YOUR SMART SCALE WITHOUT USING BLUETOOTH
..........……..11
- SET UNIT OF MEASUREMENT .................................................................………………………………..11
- WEIGHT ONLY MEASURMENT WITHOUT USING BLUETOOTH ..............……………………………..11
- SET UP YOUR SMART SCALE ........................................................................……...………………12-13
MEASURMENT PROCEDURES WITHOUT USING BLUETOOTH
....................................………..14
- MEASURING USING AUTO RECOGNITION FEATURE ...........................………………………………..15
EDUCATIONAL INFORMATION ................................................................……............……………16-18
SAFETY, USAGE & CAUTION INFORMATION ....................................………………………………..18-19
QUESTIONS AND ANSWERS ................................................................…………………...……………..20
CARE AND MAINTENANCE ................................................................…………...……………………..21
DETAILED BATTERY INFORMATION ...............................................................…………………………..21
PRODUCT SPECIFICATIONS ……............................................................………………………………..22
PROBLEM SOLVING ……………...........................................................………………………………….23
SPECIAL DISPLAYS ………......…...........................................................………………………………….24
BMI CHART ……..............………...........................................................………………………………….25
IMPORTANT NOTICE TO USERS ................................................................…..………………………….26
FCC INFORMATION …………....…..........…………………................…………………………………….27
ADDTIONAL PRODUCT INFORMATION …………....…..........…………...……………………………28-30
CONTACT INFORMATION…………....…………………….................…………………………………….32
5
4
PRODUCT DESCRIPTION
FRONT & BACK VIEW
LCD READOUT & BUTTON DESCRIPTION
FUNCTION KEYS
SET
• Conrmation button for selection
• Recall settings of user memory locations
p
or
q
• Changes value of height, age and activity level, toggle between Male/Male Athlete and
Female/Female Athlete
• Scroll through user memory P1 - P8
UNIT / CONNECT
• Quick single clicks will change between pound, kilogram and stone units of measurement
• Press and hold to send a transmission to connect via Bluetooth® to your mobile device
SET Button
LCD Readout
Platform with
electrodes
p
&
q
Button
Unit of Measure and
Connect Button
Battery Compartment
INSTALLING BATTERIES
This scale operates on 3 AAA alkaline batteries (included). Open the battery
cover on the back of the scale unit. Remove any plastic wrap from the
batteries. Insert the batteries. Be sure the polarity of the batteries is set correctly
for the scale to function properly. Always replace all batteries at the same
time; do not combine old and new batteries. Do not mix Alkaline, carbon zinc
(standard) or Nickel- Cadmium (rechargeable) batteries. If you do not intend
to use this unit for a prolonged period of time, it is advisable to remove the
batteries before storing.
AUTOMATIC SHUT-OFF
To conserve battery life this scale has an automatic shut-off feature. If the scale is
turned on and not touched, it will display “0.0” and turn off after 10 seconds. If the
scale is turned on, a measurement taken and weight is locked, the measurement
readings will be displayed and the scale will shut off after 10 seconds.
Cal-Max™ FEATURE
The Cal-Max feature uses your gender, height, age, current weight and an activity
level setting to estimate number of calories you can consume a day to maintain
your present weight. This estimation may gradually help you with a weight loss, gain
or maintenance plan.
SETTING UP YOUR SMART SCALE
USING BLUETOOTH® 4.0 TECHNOLOGY
You can use your Smart Scale with or without Bluetooth 4.0 transmitting data. Below
are the directions for setting up the scale using Bluetooth 4.0. For instructions on
setting up the scale as a stand-alone scale only, please see page 11.
SMART SCALE REQUIREMENTS
The Smart Scale is designed to be used with the following:
•
iOS
iPhone, iPad and iPod touch using iOS 6 and above
•
Android
The following products: Samsung Galaxy S3/S4/ Note II,
HTC One and Google Nexus 4
• Compatible with devices running Bluetooth® 4.0 technology
and above
EDIT USER PROFILE
To change a prole, tap the user prole icon ( ) and then make changes to the
data as necessary. Once the changes are made, tap the back button ( ) to
save the changes.
7
6
SET UNIT OF MEASUREMENT
Your scale is set to read weight in pounds (lb). You may select kilograms
(kg) or stone (st lb) (1 stone = 14 pounds) units of measurement by
pressing the “UNIT / CONNECT” button on the bottom of the scale.
Quick single clicks will change the units that display.
This button will also be used to connect to Bluetooth® by pressing and
holding the button. Be sure to check the unit of measurement after you
connect to the Bluetooth® app to be sure you have the preferred unit
displayed.
INITIAL PROCEDURES
DOWNLOAD SmarTrack™ APP & SET UP USER PROFILE
Download the FREE SmarTrack™ application from either the
App Store (for iOS devices) or Google play (for Android devices).
Use keyword search terms “SmarTrack”, “Smart Scale”,
“Smart Bath Scale”, “Weight Scale” or “Bluetooth Scale”.
Once you have downloaded the SmarTrack™ App, it is important that any
Smart Scale users follow the on-screen instructions to register. Once you
have registered on the app, enter your personal prole from your device
(phone or tablet). Completing a personal prole is essential because
the data you enter (gender, height, normal/athlete, age, activity level) is
necessary to provide you with the most accurate information.
SET ACTIVITY LEVEL
Your personal prole will include an activity level. Choose from one of the following
activity levels:
Level-1 Sedentary / very inactive: little or no exercise
Level-2 Limited Activity: exercise/sports 1-3 days a week
Level-3 Moderate Activity: exercise/sports 4-5 days a week
Level-4 Very Active: exercise/sports 6-7 days a week
Level-5 Extremely Active: physically demanding exercise/sports or athletic training
SET GOAL WEIGHT
From your home page, tap the edit user icon ( ) and then tap the
goal weight button. From the goal weight page, turn the feature on
and scroll right or left, or use the – and + keys to set your goal weight.
Set your goal date by tapping on the date and scrolling. Use the ( )
to save and return to your user prole page, hit the ( ) again to go
to the home page.
Once the prole is complete, it will transmit the user information to the
scale during the next transmission.
UNIT / CONNECT
Note: If you are sharing the scale with another user and they enter a personal
prole through the scale directly, be sure you are aware of which user number
they have selected. If you select their user number, your app prole will override
the prole entered on the scale. Ensure all users are aware of which user numbers
have already been selected.
Your SMART SCALE estimates body fat %, total body water%,
muscle mass, daily calorie estimates and weight, and then
it transmits your results to an app on a mobile device using
Bluetooth® 4.0 technology.
1. Turn on the Smart Scale by stepping on it with a bare foot until
“0.0” displays.
2. Ensure your Bluetooth setting is “On” in your mobile device
(Example: Settings > Bluetooth > On) By now you should have
downloaded the SmarTrack™ App, registered and set-up your
user prole.
3. From your home page, select the settings icon ( ), select
add device ( ), select SmarTrack™ Bluetooth Body Analyzer.
Then quickly pick up the scale and turn it over and press and
hold the “UNIT / CONNECT” button (Note: it may take up to 30
seconds for the device to detect the Bluetooth signal.)
4. The Add Device screen will then indicate that the scale has
connected when “SmarTrack™ Bluetooth Body Analyzer found”
is displayed on your screen.
5. Select SmarTrack™ Bluetooth Body Analyzer and it will take you
to the “Pair User” screen where you will select your user number.
The scale can store data for up to 8 users. Tap your user number
and it will take you to the “Completed” screen. Tap “Done”
and it will take you back to your home page.
Note: If you are sharing the scale with another user and they
enter a personal prole through the scale directly, be sure you
are aware of which user number they have selected. If you
select their user number, your app prole will override the prole
entered on the scale. Ensure all users are aware of which user
numbers have already been selected.
6. The Smart Scale is now ready for use.
SET UP BLUETOOTH® CONNECTION
CONNECTION TROUBLESHOOTING
If the transmission fails, repeat above steps. To improve transmission connection,
follow these guidelines:
a) Place the scale and Bluetooth® device reasonably close together, between 3
and 30 feet.
b) Check there are no obstacles between the scale and the Bluetooth® for best
connection.
c) Other electronics devices may cause interference (particularly those with
Bluetooth); keep them at least 3 feet away from the scale.
Note: If the batteries are removed from the scale, you will not have to reconnect the
scale to the app as it will still recognize the device when you replace the batteries.
DELETING A USER PROFILE FROM THE APP
In order to delete your user prole from the app, go into Settings and delete the
scale device. This will disconnect the app and the scale.
9
8
To ensure accuracy, use these tips to get the most
accurate and consistent readings from your scale:
• Place the scale on a at, hard oor surface. Carpeted
or uneven oors may affect accuracy. If you
experience any difculty, move the scale to a different,
hard at surface and try again.
• You must have bare feet for estimation results.
Remove your shoes and socks before proceeding.
Clean, slightly moist feet will provide the best results.
Position your feet for maximum contact with the metal
electrodes on the platform.
• Balance your weight evenly between both feet and
stand still while on the scale.
• Weigh yourself at the same time each day to see
consistent trends. Your weight and other measures will
naturally vary during the course of the day.
• IMPORTANT: The scale needs to be initialized after
battery installation or if it is moved or bumped. At all
other times, you may step directly on the scale for
a reading. To initialize the scale, simply press rmly
on the scale platform. The display will turn on and
automatically turn off. Your scale is now ready for use.
MEASUREMENT PROCEDURES WITH BLUETOOTH®
PRECAUTION !
The scale must be
started up after each
battery insertion/
replacement of
battery or each time it
is moved or bumped.
PRECAUTION !
Do Not step on scale
unevenly (X)
To avoid injury, do not
step with wet feet or on
the edge of the platform.
TO TAKE A MEASUREMENT:
1. If your user information is already in the scale, then
simply step on the scale to turn it on.
OR Press “SET” to turn the scale manually on and to
select the user number that you paired with your
personal device.
2. When the scale shows zero, step on the scale with
bare feet, positioning your feet evenly on the scale
platform with maximum contact with the metal
electrodes.
3. Stand still while the scale measures your weight. The
display counts up to your weight and will ash twice
when the weight is locked. Your weight is displayed.
4. Continue to stand still on the scale. A moving zeros
pattern shows while the scale estimates your body
composition.
5. Your body fat % (FAT), total body water % (TBW),
muscle mass (MUS), Cal-Max™ estimate (CAL),
and the difference between your current and
goal weights are automatically transmitted to your
personal device.
MEASURING USING AUTO RECOGNITION FEATURE
After you have saved your personal prole data into a memory number and
weighed yourself once, the scale will automatically recognize you for future weighins. It does this based upon the weight of the user (it will detect all proles within +/-
4.4 lbs / 2 kgs):
1. When you step the platform if there is only one user whose last weight data is
close to the current one, the memory number will be selected automatically.
When estimates are completed, the results appear on your personal device.
2. If two or more users are in a similar weight range (within +/- 4.4 lbs / 2 kgs), the
scale will notify you to choose between, for example, P1 and P2. Press “▲” or “▼”
to get to the correct number and select the user by pressing ‘SET’. If the scale
cannot identify the user’s memory number, it will only display the weight. See
“Problem Solving” section.
Note: You need to save your personal data in a user number before using the
automatic user identication measuring method, or the function will fail.
DATA TRANSMISSION FROM SMART SCALE TO MOBILE DEVICE
When your Smart Scale has been paired up with your phone or other mobile device,
your data results will be transmitted to the device via Bluetooth. An onscreen
“ ” icon indicates a successful Bluetooth® connection.
A ” ” icon appears while data is transmitted, then disappears when transmission is
complete. You may review your data on your mobile device.
If the “ ” icon remains on the screen, the transmission has failed. The scale
will temporarily store the pending data, and it will be transmitted after the next
measurement is complete.
Note: Data will only be transmitted if attached to a specic memory number. If a
personal prole has not been assigned to a memory number, the results will appear
once on the scale display only and will not be transmitted or saved.
Loading...