Taylor 5742 User Manual
Body Fat Analyzer
and Scale
5742
Leading the Way in Accuracy
®
Instruction Manual
Thank you for purchasing a Taylor® Precision Product. Your Taylor® Body
Fat Analyzer and Scale is an example of superior design and craftsmanship.
Please read this instruction manual carefully before use. Keep these instructions handy for future reference.
INTRODUCTION
How Taylor's Body Fat Analyzer and Scale Works:
This instrument uses BIA (Bioelectrical Impedance Analysis). BIA is one of
the most accurate methods of measuring body fat. It simply sends a harmless signal through the fat and muscle in your body. This method calculates
both your personal weight and body fat simultaneously, thus giving you a
more accurate reading of your overall health and fitness.
NOTE: This instrument is a personal monitor and should be used in a consistent manner for the most accurate reading. While readings might vary
between this analyzer and other methods of measurement (hydrodensitometry or hand held calipers), your changes in body fat percentage shown by this
instrument will be reflected accurately.
While this analyzer will work accurately as a scale for anyone and give accurate body fat readings for a majority of people, it is not intended for use by
pregnant women or children under the age of 18. (See Caution)
Ideal body fat/body water content is not the same for all people. Age,
sex, and heredity are variables in this measurement.
Consult your physician to determine what levels are most ideal for you.
Why is it important to monitor Total Body Water percentage (%TBW)?
Water makes up approximately 50-70% of the body's weight. It is present
proportionally more in lean tissue compared to fat tissue. Water is a medium
for biochemical reactions that regulate body functions. For better accuracy,
avoid fluctuation in hydration level prior to the measurement. The accuracy
of the scale in estimating %TBW will also decrease with individuals suffering from diseases that tend to accumulate water in the body. The optimal
%TBW of an individual varies according to age and gender.
Please note that body fat contains some body water weight. Thus, body fat
and body water percentages will not add up to 100%.
2
BATTERY INFORMATION AND GENERAL SET-UP
This scale operates on 4 AAA batteries (included).
Insert the 4 AAA batteries into the battery compartment. Ensure the + and terminals are the correct way round.
Some models have a static cling label on the lens to prevent scratching.
Please remove before use.
Your scale has been set to measure in pounds and inches
(lb). To change the measurement units to kilograms/centimeters or
stone/inches, move the switch on the bottom of the scale to
(kg) or (st-lb).
Place the scale on a flat, hard surface. Carpeted or uneven
floors may affect accuracy.
When the LCD displays “Lo”, replace the batteries.
The scale needs to be initialized before first use or
after battery replacement. Press lightly on the scale
Tap to initialize
platform. The display will show a running zeros pattern and automatically
turn off. Your scale is now ready for use.
WEIGHT ONLY OPERATION
Your Taylor® Body Fat Scale will operate as a basic weight-reading scale.
No special programming steps are required.
Once the scale is initialized, as
previously described, you may
simply step on the scale to obtain
your current weight. For a weight
only reading:
1. Place the scale on a flat, hard
surface. Carpeted or uneven
floors may affect accuracy.
2. Step onto the scale platform and remain still while the scale computes
your weight.
3. The display will flash twice when the weight is locked. Your weight is
now displayed.
4. The scale will automatically turn off.
3
USING YOUR BODY FAT SCALE
In order to measure body fat and body water, you must first enter your
height, age, and gender. The analyzer uses these factors to calculate your
results. Onscreen prompts will lead you through programming your personal
information into the analyzer. The analyzer will then use this data to compute your body fat/body water percentages.
You must have bare feet to use the body fat analyzer function.
Remove your shoes and socks before proceeding. To get the most accurate
and consistent reading, wipe your feet with a damp cloth, leaving them
slightly damp before stepping on the scale.
REMINDER: The scale needs to be initialized after battery installation. The
scale may also need to be initialized if it is moved or bumped. At all other
times, you may directly proceed with the following instructions for
programming your personal data into the scale.
To initialize the scale, simply press lightly on the scale platform. The display
will show “0000” and automatically turn off. Your scale is now ready for use.
BODY FAT AND BODY WATER MEASURING OPERATION
In order to measure body fat/body water, you must first enter your height,
age, and gender. The analyzer uses these factors for body fat and body
water calculations. This analyzer also has an athlete mode option, which
uses additional software to calculate more accurate results for highly fit
individuals. Onscreen prompts will lead you through programming your
personal information into the analyzer. The analyzer will then use this
data to compute your body fat/body water percentages.
Your data may be stored into memory for future use, thus eliminating the
need to enter your personal information before each reading (see the
next section about “Memory Functions”).
1. You must have bare feet to use the body fat analyzer function. Remove
your shoes and socks now, before proceeding with Step 2. To get the most
accurate and consistent reading, wipe your feet with a damp cloth, leaving them slightly damp before stepping on the scale.
2. Press the ON button to turn the scale on. The height digits blink.
3. Press the (▲) or (▼) button to increase / decrease the height value. Press
the SET button to confirm displayed height. The age digits blink.
4. Press the (▲) or (▼) button to increase / decrease the age value. Press
SET button to confirm displayed age. A gender icon blinks.
5. Press the (▲) or (▼) button to toggle between the male and female gender
icons. Press SET button to confirm your gender. The normal or athlete
mode icon blinks.
6. Press the (▲) or (▼) button to toggle between athlete mode and normal
mode. (Please note: this selection is only available to those aged 18 or
4
Loading...