TAYAMA
R
Tayama Appliance USA Inc.
www.tayama-usa.com
User Manual
1500-Watt Countertop Induction Cooker
Model TIH-1500X
Please read a ll in struct ion s carefully before operating the appliance and kee p for future referen ce.
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be
followed including the following:
1. Read all instructions before use.
2. Do not touch hot surfaces. Use handles or knobs.
3. To protect against electrical sh ock do not immerse cord, plugs, or (state
specific part or parts in question) in water or other liquid.
4. Close supervision is necessary when any appliance is used by or near children.
5. Unplug from outlet when not in use and before cleaning. Allow to cool before
putting on or taking off parts.
6. Do not operate any appliance with a damaged cord or plug or after the
appliance malfunctions or has been damaged in any manner. Return appliance
to the nearest authorized service facility for examination, repair, or adjustment.
7. The use of accessory attachments not recommended by the appliance
manufacturer may cause injuries.
8. Do not use outdoors.
9. Do not let cord hang over edge of table or counter, or touch hot surfaces.
10. Do not place on or near a hot gas or electric burner, or in a heated oven.
11. Extreme caution must be used when moving an appliance containing hot oil or
other hot liquids.
12. To disconnect, turn any control to “off”, then remove plug from wall outlet.
13. Do not use appliance for other than intended use.
14. Household use only.
15. Do not immerse in water.
16. Do not place metallic objects such as knives, forks, spoons and lids on t he
cooktop since they can get hot.
Thank you for purchasing the Tayama® Induction Cooker, please read this instruc tion
manual carefully before using and keep it for your future reference.
Table of Contents
Important Safeguards.........................................Page 1
Product Introduction...........................................Page 2
Induction Cooker Working Principle......................Page 3
Specification......................................................Page 3
Structure Description..........................................Page 4
Function Diagram................................................Page 4
Operation and Usage………………………..........………….Page 5
Selecting the Proper Cookware.............................Page 6
Helpful Hints.......................................................Page 7
Care and Maintenance.........................................Page 8
Troubleshooting..................................................Page 9
Please Save These Instructions.
Short Cord Instruction
A short power-supply cord should be used to reduce the risk resulting from becoming
entangled in or tripping over a longer cord.
Exten sion cords are available and may be used if care is exercised in their use.
If an extension cord is used:
1) The marked electrical rating of the extension cord should be at least as great as the
electrical rating of the appliance; and
2) The cord should be arranged so that it will not drape over the countertop or
tabletopwhere it can be pulled on by children or tripped over unintentionally.This
appliance has a polarized plug (one blade is wider than the other). To reduce the risk
of electric shock, this plug is intended to fit into a polarized outlet only one way.
If the plug does not fit fully into the outlet,reverse the plug. If it still does no t fit,
contact a qualified electrician. Do not attempt to modify the plug in any way.
1 2
Product Introduction
Congratulations on purchasing a Tayama® Countertop Induction Cooktop TIH1500X! This 1500 Watt Micro-Inductio n Cooktop from Tayama® is designed to
provide the best performance, safety and efficiency in cooking. When cookware
is placed on the ceramic surface, currents are induced in the cookware and
instant heat is generated due to the resistance of the pan. Heat is generated only
to the pan and no heat is lost. Since there are no open flames, induction is safer
to use than conventional burners. This 1500 Watt cooktop is designed for
countertop applications and includes two functions: cook and warm. There are
nine power settings and 9 warm settings, allowing you to have complete control
over cooking power. The TIH-1500X has an LED panel for easy temperature
monitoring and the timer can be programmed for up to 8 hours. The control
panel is touch-sensitive and includes a control lock.
Induction Cooker Working Principle
The induction cooker is mainly based on the principle of electromagnetic
induction technology. Current generates variable magnetic field after running
through the wire coil. Eddy current is generated at the bottom when the
magnetic field induces the cooker plate. A large amount of thermal energy
produced can heat the bottom quickly, thus heating up the food very fast,
with thermal efficiency up to 94.36%.
Structure Description
Specification
Model No.
Power Supply
Power Adjustment
Temperature Adjustment
Timer
Function Diagram
TIH-15 00X
AC120V~60HZ/1500W
9-stage power
140°F/60°C - 430°F/220°C
8 hours
3 4
Operation and Usage
COOK Mode: Heat is constantly added at the selected power level.
• 9 COOK levels (wattage): 600, 700, 800, 900, 1000, 1100, 1200, 1300.
1500
TEMP Mode: Unit will maintain at selected temperature.
• 9 TEMP settings (°F/°C): 140/60, 175/80, 210/100, 250/120, 285/140,
320/160, 355/180, 390/200, 430/220
• Temperature may vary slightly at different sections of the pot.
• Factors such as ambient temperature, type of cookware and food
content may cause temperature variance up to 20°C ±.
1. Plug power cord to power source and place cookware centered on
cooktop. (Once power is connected, the LOCK button will illuminate).
2.To turn on, press LOCK (LED now displays “- - - -“). Press ON/OFF
button within 30 seconds. If ON/OFF is not pressed within 30 seconds,
2.Press + or - button to set cooking time. Each single press is increment
of 1 minute; press and hold for increments of 10 minutes. Press LOW
button will jump to 1 minute on the timer or HIGH for the maximum 8
hours. (Default is 2 hours)
LOCK BUTTON
1.Press LOCK button to lock in settings.
When locked, display will jump between time left and setting.
No changes can be made (mode, level or time).
2.Press LOCK button again to unlock.
Selecting the Proper Cookware
unit will return to locked mode.
3.Press COOK or TEMP buttons to select desired mode.
4.Press + or - button to adjust cooking level or temperature setting; press
LOW button to jump to lowest cook/temp setting or press HIGH button for
highest cook/temp setting.
5.In TEMP mode, press the °F or °C button to change scale display.
Note: ① Factory default setting is COOK at 1500W.
② Factory default setting is TEMP at 430°F /200°C
TIMER SETTING
1.Press TIMER button.
5 6
• The base of the cookware must be of a ferrous metal (metal that can
be magnetized): Cast iron, steel and stainless steel.
• Base of cookware should be between 4.5 to 12 inches.
• A simple test to check if cookware will be compatible is to take a small
magnet and place it to the bottom of pan. If the magnet firmly sticks,
the cookware is compatible.
• These type of cookware will NOT work with inductions: Glass, copper,
aluminum, ceramic, cookware with a concaved bottom, bowl-shaped
cookware or those with a diameter smaller than 4.5 inches.
Helpful Hints
Care and Maintenance
1. If no cookware is placed or sensed on the unit, cooker will automatically
shut off after 10 seconds.
2. Cooker will automatically shut-off after 2 hours of inactivity (when not
set on timer).
3. Place cooktop on flat surface, but keep a clearance of 4 inches all
around for proper ventilation. If air inlet or outlet is blocked, the internal
temperature will rise and cause unit to overheat and shutoff during
cooking.
4. Keep away from water source. Never immerse unit in water or clean
under running water.
5. Do not place paper or cloth in between the cooktop and cookware.
6. Due to the magnetic heating of the unit, keep objects that may be
affected away from unit, such as credit card, watch, radio, etc.
7. To prevent damage to your cookware, do not heat an empty pan.
8. Do not place one cooktop on top of another.
9. Do not place on or near a hot gas or electric burner or in a heated
oven. If the surrounding temperature is high, unit will shut off.
10. Do not use cookware consisting of inferior enamel, synthetic
material, china or aluminum. DO NOT USE PLASTIC WRAP.
11.Never heat an unopened can on the cooktop as it may explode.
12.The ceramic plate will retain heat from the cookware; never touch
the ceramic plate immediately after cookware is removed. Wait a few
minutes and allow unit to cool.
13.Plug cooktop in a dedicated 15-amp outlet. Do not share the outlet
with other appliances.
14.Do not damage the ceramic plate. Be careful not to drop anything onto
the ceramic plate. If the plate is broken or cracked, stop using
immediately. Turn unit off and unplug.
1. Unplug unit from power source.
2. Wipe ceramic plate and exterior surface with a soft damp cloth. If
excessively dirty, soak cloth in a mild detergent and water mixture.
After remove dirt, please use neat wet cloth to clean the unit.
3. Do not clean by water directly, water gets inside may cause
product damage.
4. Make sure the ceramic plate and pan is clean before cooking ,
otherwise, dirt after charring is very difficult to clean and the plate
may become discolored.
5. You may clean air vent/air entry's dirt by vacuum cleaner to suck
up or by cotton, if there is dirt with oil, add a little detergent with
toothbrush to clean surface. Never clear inside with water or any
other liquid.
6. Do not use corrosive elements to clean. It may damage the cooker
by chemical reaction.
7. Do not use benzene, thinner， scrubbing brush or polishing powder
to clean the induction cooker.
7 8
Troubleshooting
Error Codes
9 10
TAYAM A
TAYAM A
TAYAM A
TAYAM A
R
TAYAM A
R
R
R
R
Loading...