Page 1
1
Glamor Moving Spot 180
USER MANUAL
Thanks for choosing our goods please read this manual carefully before
your operating and keep this manual for future needs
Page 2
2
Content
Content..................................................................................................................02
1.Product Introduce ............................................................................................03
2.Fixture Size........................................................................................................03
3.Parts Introduce................................................................................................ 04
4.Safety Information...........................................................................................05
5.Packing and Shipping ....................................................................................07
6.AC Power........................................................................................................ 07
7.Light Source.................................................................................................... 07
8.Control Panel Operate....................................................................................09
9.DMX Channels................................................................................................ 11
10.PCB Driving Board.........................................................................................13
Page 3
3
STATEMENT
The product is good packing when ship out the factory. All users should strictly abide by the
warnings and instructions stated in this manual, any damage and results due to misuse and the
neglect of this operating manual will be excluded from the deal responsibility this manual will
not
informed in additionally if have technical changes.
1. Production Introduce
Thank you for choose this GLS180 products, this model is the moving head light which is the
latest development of the smart, efficient products, beautiful shape, smooth R & D, combined
with the advanced technology of today's stage lighting products with international advanced
electronic control technology and excellent user-friendly industrial design , fully comply with CE
standard, accepted international standard DMX512 signal mode. This moving head lights, use
appotronics' 180w White LED source, coupled with the high-quality optical lens components,
broadband voltage, a clear pattern, sharp and uniform output light efficiency. Intelligent LCD
display module, the English language selection mode, intuitive operating menu, shortcut. The
fixture have 16/24 international standard DMX512 channels optional Horizontal scan: 540 °
vertical scanning 270 ° (16bit precision scanning) electronic correction, the display can inverted
180 degree. 8 color and one white as color wheel; two gobo wheels: 9 static gobos and open plus
7 rotating gobos and open; 3-facet prism wheel, gobo shading and overheat protection.
2. Fixture Size
Dimension：367（L）×345（W）×561（H）mm
Page 4
4
3. Parts Introduce
GLS180 product part of the structure and main composition name
GLS180's Main function introduction on surface
01 — Lens
02 — Body
03 — Tilt Lock
04 — Arm
05 — Pan Lock
06 — Handle
07 — Light Base
01
02
010203
04
050607
01 — LCD Display
02 — Control wheel
01 — 3-pin DMX Input
02 — 5-pin DMX Input
03 — Power Input
04 — Power Output
05 — 3-pin DMX Output
06 — 5-pin DMX Output
07 — Fuse
02
01
03
07
06
04
05
Page 5
5
4.SAFETY INFORMATION
Safety Warning: This product is only suitable for professional use, and does not apply to security
for other purposes. When you got the lights, please check the package whether have any damage
caused by transportation. If there is any damage, do not use this fixture, and please contact the
dealer or manufacturer as soon as possible. This product is only suitable for indoor, IP20
protection class. Lamps should be kept dry to avoid Moisture, overheating or dusty environment.
Prevent lamps come into contact with water or any other liquid. The use of this product should
pay attention to: fire, heat, electric shock, ultraviolet radiation, the lamp to explode or Shedding
caused serious or fatal injury. Please read the instructions before use energized or installing.
Follow through the operation of security methods and pay attention to the warning signs on the
specification and equipment.
4.1
ANTI-HIGH TEMPERATURE
ta =40°C
Please don’t use the equipment if the temperature above 40℃
4.2 BURST PREVENTION
The lens should be changed if had damaged or any problems. Don’t change the non-original
manufacturer lens.
Len size：Φ76×10 mm
4.3 TO PREVENT FALLING WOUNDING
When Hang the fixture, please must verify that the facilities to be able to withstand at least
10 times or more weight of fixtures.
Please make sure the Mounting hardware is strong enough no any damage, and insurance
for the safety rope as auxiliary security fixed in other facilities will need to verify before
installation. Installing or removing the equipment, to make the pulley below the work location
4.4 UA PROTECTION
Forbid straight viewpoint with exposed bulbs to avoid UV damage to the eyes;
Do not use the equipment without the lens screen and the lid;
The lens and the light head covers should be timely replaced if any damage to rupture.
4.5 PREVENTION OF ELECTIC SHOCK
The electrical connection must only be carried out with corresponding qualifications;
Before installing, make sure you use the power voltage lamps must comply with the
identified power, voltage and have an overload or leakage protection;
Each fixture must be properly grounded, installed in accordance with the relevant standards;
Cut off the power when stall or replace the lamp and the fuse;
Forbid using the fixture in storm or wet environment.
Page 6
6
4.6 TO PREVENT BURNING OR FIRE
1. The fixture can't be mounted directly on the surface of ordinary combustible material.
2. Do not short-circuit temperature protection switch or fuse, use the specified type of fuse.
3. The equipment must be installed away from inflammable and explosive materials.
4. The equipment should be projected range of 3 meters away objects and projectiles
temperature less than 60 ° C; ---- 3.0m
5. Fan or ventilation, at least in the range of 0.5 meters can not have an obstacle.
6. Do not place any object on the lens.
7. Handling at least allow the fixture being cool for 20 minutes.
8. Do not replace the non-original parts.
4.7 LOCK FIXTURE DURING TRANSPORT
In order to protect the light, there is a protect lock; During the transport , the lock will closed
keeping the item in safety state.
4.8 ABOUT PACKING
1. Before packed, make sure power is off, and wait for at least 20mins for cooling down.
2. Before clean the fixture, make sure pan/tilt protect lock closed.
3. After packed by plastic bag, high-lift the fixture with two handles besides the product. put
the product into the fly-case up-side-down.
4. After packed the product, put the accessory into the accessory case, then closed and lock
the fly-case.
5. Fly-case only up stacked two layers. Forbid to upside down.
6. When packed with carton box, equipment should be put into the foam first, then set into
a carton, pay attention to the vertical position.
4.9 UNPACKING
Note: Before unpacking check the damage is whether due to the transportation or not, if
you find any such damage, please do not use this item, and contact with the dealer or
manufacturer as soon as possible.
1. Open the fly-case, and discover the inside plastic bag.
2. High-lift the product by two handles beside the bottom base and move it out.
3. Before power on, make sure you have opened pan/tilt lock!
Warming
Must use two pieces of clamps to fix the product and locked at 1/4 , the clamp can be
locked at its clockwise 90°. Plus one safety rope across form the hole on the bottom, but not the
handle.
Attention! One product only can accept one DMX input and one DMX output. DMX512 cable
must use the professional shielded twisted pair cable; standard loudspeaker cable is not reliable
to control the long-range data. 24AWG cable is suitable for more than 300 meters long-distance
signal transmission and must add DMX 512 signal amplifier. Do not use two outputs to separate
F
Page 7
7
the connection, if separate a continuous connection to branch, DMX512 splitter is necessary. If
use the DMX512 splitter. At first connect DMX512 Splitter input terminal to controller. And then
connected from the splitter output terminal to next device. As above guide to connect with the
final fixture 120 input other device with 3-pin terminal insertion.
5. Packing and Shipping
GLS180 packed with fly-case of two in one, or carton box.
Attach follow accessory.
Content
Quantity
User Manual
1
DMX Cable
1
Safety Rope( charge)
1
6. AC Power
GLS180 Voltage, Power, Fuse Specification
Input Voltage
Total Power
Frequency
110-240V
260W
50/60HZ
Fuse voltage
Electronic current
Specification
250V
6A
5×20
GLS180 Connect to Power:
ATTENTION! The equipment must be operated by professionals; Make sure that the voltage
of power supply must be comply with the voltage identified on the lamp, and must have an
overload or leakage electrical protection.
Live wire(L)
Null(N)
Ground wire
RED
BLUE
Yellow +Green
7. Light Source
LED Description
Lamp Model
Power
Life/Hrs
Color Temperature
Atria TM HL180
180W
20000hrs
8000K
Page 8
8
GLS180's Color Wheel: 8 colors + white, pure color effect.
GLS180's Static Gobo wheel: 9 gobos + open, rich gobos for your selection.
GLS180w's Rotating Gobo wheel: 7 gobos + open, smoothly rotating and easy changeable
GLS180 with 3-facet prism
；
Prism gobo with focusing, rotating, zooming and shading and adjusting rotation speed.
Page 9
9
8. Control Panel Operate
8.1. Control Panel
LCD Display: Display all information of fixture.
Control wheel: can turn left, right and enter.
Turing left: Value adding in Menu
Turing right: Value reducing in Menu
Enter: Confirm
8.2.Control Panel Operate
Main Menu
Sub-Menu
one
Sub-Menu two
Function
Setting
Function Description
DMX Address
001-512
DMX Address number set
Display
"ShowReve"
"Natu"
Normal
"Revl"
reverse 180°
"Language"
"Chin"
Chinese
"English"
English
"BrigSett"
000-255
Brightness set
"Backligh"
60S
Backlight close after delay
60S
"Ligh"
Backlight light always
"MenuBack"
90S
Menu back to main menu
after delay 90S
"Off "
Menu back not automatic
Backflah
"Open "
Backlight blinking when no
DMX
"Off "
Backlight not blinking
when no DMX
"Return"
▲
Return Main Menu
LCD Display
Control Wheel
Page 10
10
"Feature"
Pan/Tilt
Setup
"Pan reverse"
"Off "
Pan Scan Normal
"Open"
Pan Scan Reverse
"Tilt reverse"
"Off "
Tilt Scan Normal
"Open"
Tilt Scan Reverse
"Pan / Tilt
reverse"
"Fast"
Pan/Tilt Speed up
"NORM"
Pan/Tilt Normal Speed
"Slow"
Pan/Tilt Slow down
"Pan Angle"
360°
Pan Angle 360°
540°
Pan Angle 540°
630°
Pan Angle 630°
"Pan/Tilt
Fback"
"Off "
PAN/TILT optical
sensor testing off
"Open"
PAN/TILT optical
sensor testing on
Return
▲
Return to special Menu
"Shortcut"
"Off "
Shortcut off for
colors and gobos
"Open"
Shortcut open for
colors and gobos
"FullColr"
"Off "
Half color function
"Open"
Full color function
"ChanMode"
"Smal"
Simplify mode
"Stan"
Standard mode
"RunMode "
"Slve"
Accept other signal
control
"Musc"
Sound active
"Auto"
Inside program Run
automatically
"SigClear"
"Off "
keep signal data
"Open"
clear signal data
DMX Reset
"Off "
DMX reset not accept
"Open"
DMX reset accept
Return
▲
Return Main Menu
"InfoSee "
"WorkHour"
0000-9999
working hours memo
for connect power
"Times"
0000-9999
Open times memo
Fan 1 Rota
0000-9999
Fan rotation speed 1
Fan 2 Rota
0000-9999
Fan rotation speed 2
Version
XMOA
Version
Pan/tilt
software
Page 11
11
Main 1
software
Main 2
software
Spare time
Not limit
No limit time
Spare cut
Not limit
No limit times
Lamp
temperature
Password input Enter
Return
▲
Return main menu
Channel
"Factory "
CH 00- CH40
Coordinate DMX CH
"AssiTool"
★
Password confirm
"Fold"
Factory reset
"Save"
Keep factory reset
"Default
settings"
★
Password confirm
"Fold"
Reset to default settings
Redress
★
Password confirm
Reset01-10
Remind the start position
Redress
Color wheel
Rotation 001
Function Channel custom
orders
000……040
Function Channel custom
orders
Chdefine
★
Password confirm
"TimeLimi"
0000-9999
Open fixture time limit
"TimsLimi"
0000-9999
fixture times limit
TimeCLEA
clear
Clear the time of used
CutClea
clear
Clear the times of used
Password 1
000-255
Revise password 1
Password 2
000-255
Revise password 2
Password 3
000-255
Revise password 3
Password 4
000-255
Revise password 4
X Drivin
000-255
pan main drive gear
X Driven
000-255
Pan slave drive gear
Y Drivin
000-255
Tilt main drive gear
Y Driven
000-255
Tilt slave drive gear
Rectifier
Bulb Rectifier
5V
Bulb Rectifier 5V
Tilt angel
000-255
Vertical rotation Angle
setting
Reset
000-255
return to sub menu
"Checksum
"
Checking Date
1-10
Checking Date
01…10
Check Cabrilate data
Return
▲
Return to Main Menu
Page 12
12
CHANLEVE
CH 01..40
Show the dmx address
"EffectRst"
"Exec"
Cancel
"Exec"
Reset
"ExitMenu"
▲
Exit
9. DMX Channels
CH
Value
Function
1CH Color
0~13
white
14~27
Magenta
28~41
Dark Red
42~55
Blue
56~69
Light Blue
70~83
Green
84~97
Yellow
98~111
Amber
112~127
Red
128~133
Red + Amber
134~140
Amber + Yellow
141~147
Yellow + Green
148~154
Green + Blue
155~161
Light Blue + Blue
162~168
Blue + Dark Red
169~175
Dark Red + Magenta
176~193
Magenta + white
194~222
Rainbow Fast →Slow
223~255
Rainbow Slow →Fast
2CH Rotating Gobo Wheel
0~24
Empty
25~49
Gobo 1
50~74
Gobo 2
75~99
Gobo 3
100~124
Gobo 4
125~149
Gobo 5
150~174
Gobo 6
175~199
Gobo 7
200~255
Gobo Rotating Slow → Fast
3CH Gobo Rotating
0~127
Index
128~177
Clockwise Slow → Fast
178~203
Stop
203~255
Anti Clockwise Fast → Slow
0~9
Open
10~19
Gobo 1
Page 13
13
4CH Static Gobo Wheel
20~29
Gobo 2
30~39
Gobo 3
40~49
Gobo 4
50~59
Gobo 5
60~69
Gobo 6
70~79
Gobo 7
80~89
Gobo 8
90~99
Gobo9
Gobo Shaking
100~111
Gobo 9
112~122
Gobo 8
123~133
Gobo 7
134~144
Gobo 6
145~155
Gobo 5
156~166
Gobo 4
167~177
Gobo 3
178~188
Gobo 2
189~199
Gobo1
200~255
Gobo Shaking Slow →Fast
5CH Pan
0~255
540°
6CH Tilt
0~255
270°
7CH Pan/Tilt Speed
0~255
Pan/Tilt Speed Fast→Slow
8CH Prism wheel
0~127
No Function
128~255
3-facet prism
9CH Prism Rotating
0~5
Index
6~99
Anti Clockwise Slow → Fast
100~109
No Functions
110~210
Clockwise Fast → Slow
211~255
Gobo Shaking Fast → Slow
10CH Focus
0~255
Zoom Focus
11CH
No Function
12CH Strobe
0~9
No Function
0~255
Shutter Slow→ Fast
13CH Dimmer
0~255
Dimmer Dark → Bright
14CH Frost
0~255
Linear Frost
15CH Reset & Lamp On
200；209
Reset & Lamp On
16CH Pan Fine
001~255
Pan Fine
17CH Tilt Fine
001~255
Tilt Fine
Page 14
14
10. PCB Driving Board
Loading...