CONGRATULATIONS ON THE PURCHASE OF YOUR NEW TAURUS PEDAL
P A D
VOLTAGE RANGE 9-12V
UNIQUE FEATURES:
olarity uto etection
DC Assistant -
Thank you for your trust and for selecting Taurus effects pedal.
Taurusis made bymusicians for musicians.It's been ourphilosophy to provideyou withthe best possiblequality,
fully professional,superior musicalequipment.
While designing this device we've taken in consideration that it requires more than just selecting the correct
parameters, bestcomponents andhand crafting toachieve theperfect balance betweentechnology andsound.
Our very close collaboration with musicians has helped us to design and manufacture high quality equipment
which willexceed yourexpectations and needs.
We at Taurus, extend our gratitude andwish you great musical experience, sonic adventures and explorations
with ourgear whichwill become yourfaithful companion!
please note that analog effects supplied with 12V give 33% higher dynamics than
with 9V.
protects from loss of signal. Effect switches automatically to the "bypass mode" in case of
disconnection or low voltage of DC supply (<6V).
– allows using supplies with center-positive and center-negative polarity
is an octaver which enables polyphonic transposition of sound up and down
an octave. Both octaves can be freely mixed with instrument signal. You can use only upper or lower octave
or both at the same time. Polyphony is built by a high-quality 24-bit DSP. The octaver is equipped with
regulators of both octaves, which means that you can easily shape the sound of an instrument. With the use
of the regulators you can eliminate unwanted tones, which may sometimes appear in octaves and e.g. blur
the sound or change the sound of an instrument too much. It turns out that wideband audio processing by an
octaver might be undesirable in some situations. This is why the regulators prove to be very useful by
allowing a player to create the right sound.
Taurus-Dexter Mk-2
1.
2.
3.
.
.
7.
6.
8.
9.
10.
4
5
INPUT - mono 1/4" (jack)
OUTPUT - mono 1/4" (jack)
POWER SUPPLY INPUT - 12V
LO-octave level adjustment.
adjustment.
Hi-octave level adjustment.
LO-octave freqency range adjustment. In the MAX position the lower octave runs throughout the
bandwidth and reacts to the entire scale of sound. In the MIN position the lowest frequency is limited, which
means that the lower octave reacts less effectively to the lowest frequency sounds. This way you can
eliminate the lowest sound frequency, which is not clear and blurs the sound of an instrument when playing
lower registers, leaving only the more desirable harmonics.
Hi-octave freqency range adjustment. In the MAX position the upper octave runs throughout the
bandwidth and reacts to the entire scale of sound. In the MIN position the highest frequency of the upper
octave is limited - octaver processes the highest frequency sounds. This way you can eliminate very high
frequencies, which may sound too high and artificial in some instruments when processed in upper octave.
FOOT SWITCH - true-bypass when on the "Off "position
indicator
> impedance: 1M ohm
> impedance: 1K ohm
DC 9- polarity supply auto detection
Dry signal level
Effect „ON”
Dimensions: (H x W x D) 65 x 96 x 144mm
/
mA
/ connector domensions 5,5x2,1mm.
Only stabilised power supply >150 must be used.Warring!
Spódbottom bottom
Rubber leg caps and velcro
are included in the package
to secure your effect
to the pedal board.
54
3
2
1
6
7
8
54
3
2
1
6
7
8
54
3
2
1
6
7
8
9-12V/DC
Polarity Auto Detect.
T
R
U
E
B
Y
P
A
S
S
Polyphonic
octaver
Dexter
EFFECT SPECIFICATION