Tatung TLM-1906, TLM-1706, TLM-1506 User Manual

OPERATING INSTRUCTIONS

TLM-1506 / TLM-1706 / TLM-1906

TABLE OF CONTENTS

z FCC information ---------------------------------------------------------------------- 3

z CE information ------------------------------------------------------------------------ 3

z Safety Precautions ------------------------------------------------------------------- 3

1. Scope -------------------------------------------------------------------------------------- 5

2. Unpacking -------------------------------------------------------------------------------- 5

3. Functional specification ------------------------------------------------------------- 5

4. Controls and indicators -------------------------------------------------------------- 8

5. OSD Menu -------------------------------------------------------------------------------- 9

6. Regulatory Agency ------------------------------------------------------------------- 11

7. Mechanical ------------------------------------------------------------------------------ 11

8. Reliability -------------------------------------------------------------------------------- 11

9. Appendix -------------------------------------------------------------------------------- 12

10. LCD Video Monitor Specification ---------------------------------------------- 13

FCC INFORMATION

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. Shielded interface cables and A.C. power cord, if any, must be used in order to comply with emission limits. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

CE INFORMATION

The product must be installed according to the currently valid installation regulations for EMC to guarantee the designed use and to prevent EMC problems. The device supplied with this manual is according to the EC, EMC Directive, 89/336/EEC & LVD 73/23/EEC Standard used for showing compliance with the essential requirements of the device: EN 55022 EN 61000-3-2 EN 61000-3-3 EN 50130-4 EN 55024 LVD: EN60950-1

SAFETY PRECAUTIONS

1. Do not modify the three-prong grounding type monitor power plug in any way.

2. Operate this unit only from the type of power source indicated on the label.

3. Do not block or cover ventilation openings on the back or bottom of the monitor cabinet.

4. Do not place this monitor near a radiator or heating vent.

5. Do not push objects of any kind through cabinet openings. This may result in fire or electrical shock.

6. Before adding attachments always ask a service technician to perform routine safety tests to determine that equipment is in safe operating condition. Ground potential tests should be part of the routine safety check made by the service technician.

7. Do not place monitor on an unstable cart, stand, or shelf where it may fall and injure personnel or damage equipment.

8. Route power cords so that they cannot be walked upon or tripped over. Do not allow anything to rest on the power cord.

9. Do not install monitor in wet areas, or where it may be exposed to rain or water. Do not spill liquid of any kind on the unit.

10. Unplug the power cord from the unit before cleaning the display. Use only a damp cloth. Do not use alcohol, spirits, or ammonia to clean the display. DO NOT ATTEMPT TO

CLEAN THE INTERIOR OF THIS UNIT- THIS ACTION MUST BE PERFORMED BY THE SERVICE TECHNICIAN AS REQUIRED DURING NORMAL MAINTENANCE.

11. Refer all servicing to qualified service personnel. REMOVAL OF BACK COVER BY UNAUTHORIZED PERSONNEL MAY EXPOSE THE USER TO DANGEROUS VOLTAGES OR OTHER HAZARDS.

12. Unplug the unit immediately and notify the service technician. A. If liquid has been spilled into the display or the display has been exposed to rain or

water. B. If the unit has been dropped or the cabinet damaged. C. If fuses continue to blow. D. If the power cord is damaged or frayed. E. If a distinct change from normal operation is apparent.

When replacement parts are required, be sure that the service technician uses components specified by the manufacturer which have the same characteristics as the original parts. UNAUTHORIZED SUBSTITUTIONS MAY RESULT IN FIRE, ELECTRICAL SHOCK OR OTHER HAZARDS.

Upon completion of any service or repairs, ask the technician to perform safety checks to determine that the equipment is in safe operating condition.

WARNING: SERIOUS SHOCK HAZARDS EXIST WITHIN THE COVERS OF THIS MONITOR. DO NOT OPEN THE COVERS UNDER ANY CIRCUMSTANCES, THERE ARE NO USER SERVICEABLE COMPONENTS INSIDE

1. Scope

This specification is used to define the performance of TLM-1506 / TLM-1706 / TLM-1906 color TFT LCD monitor. This system supports both video input and PC VGA input. In video input mode, the system can automatically detect the NTSC signal and PAL signal. In PC mode, TLM-1506 can support up to 1024x768 VESA standards. TLM-1706 and TLM-1906 can support up to 1280x1024 VESA standards.

2. Unpacking

After you unpack your LCD monitor, make sure the following items are included in the box and in good condition:

z 15”, 17” or 19” LCD monitor. z Monitor to PC analog signal cable (15 pin). z Power cord, US type, 6-ft long, black. z Operating Instructions.

3. Functional Specifications

Power Supply

The power supply spec is listed below, AC INPUT

*AC power input range: 100 – 240 VAC, 60/50Hz, 1.5Arms (Max) * Power consumption: TLM-1506 and TLM-1706: 32W (Max) TLM-1906: 40W (Max)

LCD Panel:

Type 15” TFT LCD 17” TFT LCD 19” TFT LCD Screen Size 304.1(H) x 228.1(V) mm2 337.9(H) x 270.3(V) mm2 396.0(H) x324.0(V) mm2 Viewable Picture Area 381mm (15 in) diagonal 431.8mm (17 in) diagonal 482.6mm (19 in) diagonal Pixel Pitch 0.297(H) x 0.297(V)mm 0.264(H) x 0.264(V)mm 0.294(H) x 0.294(V)mm Resolution 1024 x 768 pixels 1280 x 1024 pixels 1280 x 1024 pixels Aspect Ratio 4:3 5:4 5:4 Display Colors 16.2M 16.7M 16.7M Response Time 8ms 5ms 5ms Back Light Life Time 50,000 50,000 50,000

TLM-1506 TLM-1706 TLM-1906

Optical Characteristics:

Luminance 450 cd/m2 300 cd/m2 300 cd/m2 Contrast Ratio 500:1 1000:1 1000:1 Viewing Angle 140o Horizontal,125o Vertical 160o Horizontal,160o Vertical 160o Horizontal,160o Vertical

TLM-1506 TLM-1706 TLM1906

Video Characteristics: Composite Video (CVBS): 1.0 Vp-p (0.5 – 1.5Vpp), Automatic switching from 75 Ω

unbalanced termination to Hi-Z with loop-through operation.

Y/C (S-video): 1.0 Vp-p (0.5 – 1.5Vpp), Automatic switching from 75 Ω unbalanced

termination to Hi-Z with loop-through operation.

VGA Input:

Analog RGB: 0.707 Vrms.

VGA Timing Modes MODEL

TLM-1506

TLM-1706

RESOLUTION

640 x 480 60/75Hz 60/75Hz 60/75Hz 800 x 600 60/75Hz 60/75Hz 60/75Hz

1024 x 768 60/75Hz 60/75Hz 60/75Hz

1280 x 1024 N/A 60/75Hz 60/75Hz

Audio Input:

Signal Level: 1.0 Vrms

Audio Output:

Speaker 2W x 2

TLM-1906

Controls: Front panel push buttons CH : Select Video, S-Video(Y/C), VGA MENU : Enter On-Screen Display (OSD) menu

– : Decrease the volume + : Increase the volume

POWER : Power On/Off

+ 13 hidden pages