Loading...
OPERATING INSTRUCTIONS
TLM-1503 / TLM-1703
Introduction
Product Description |
………………………………….. |
2 |
||
Package Contents |
………………………………….. |
2 |
||
Product Features |
………………………………….. |
2 |
||
Cleaning |
………………………………….. |
3 |
||
Precautions |
………………………………….. |
3 |
||
Control Function |
………………………………….. |
4 |
||
OSD Control |
………………………………….. |
5 |
||
HOT Control |
………………………………….. |
6 |
||
Inputs/Outputs |
………………………………….. |
7 |
||
Display Angle |
………………………………….. |
8 |
||
Product Specification |
………………………………….. |
9 |
||
Display Modes |
………………………………….. |
10 |
||
Option Rack Mount Kit |
………………………………….. |
11 |
||
|
|
|
|
|
|
|
|
|
|
Page 1
INTRODUCTION
Product Description
Congratulations on purchasing your new 15”, 17” TLM monitor. Your LCD monitor incorporates a high quality display into a small light weight module. It has power-saving capabilities and emits no X-ray radiation.
This LCD monitor incorporates 15”, 17” color active matrix thin-film transistor (TFT) liquid crystal display to provide superior display performance. A maximum resolution of 1280 x 1024 SXGA is ideal for displaying complex graphics and high definition images. Additional features that enhance this LCD monitor’s performance are Plug & Play compatibility, audio system, and OSD (On Screen Display) controls.
Package Contents
15” or 17” TFT LCD monitor 15 pin D-sub signal cable AC power cable
Operating Instructions
Product Features
High contrast color TFT LCD display supports resolution up to 1280 x 1024 SXGA for 17” & 1024x768 XGA for 15”.
Compatible with IBM, VGA, VESA, and Macintosh standards. Imbedded audio system provides high performance.
BNC video input and Loop through output DIN S-Video input and Loop through output RCA Audio inputs and outputs
Page 2
CLEANING
Gently wipe your screen with a clean camel hair brush or a soft, clean, lint-free cloth
Gently apply pressure to the screen surface to clean display
Do not spray ANY liquid directly on the screen or casing of the LCD monitor Chemical cleaners have been reported to damage the screen or the LCD monitor
PRECAUTIONS
Do not block vent holes with any objects
Do not insert sharp objects or spill hazardous material onto the LCD (may cause fire, electric shock, or failure
Disconnect the power plug from the AC outlet if you anticipate infrequent use Do not attempt to service this product yourself. Opening or removing casing may expose you to dangerous voltage points or other significant risks
Avoid touching the screen directly with your fingers as the oils from your skin may be difficult to remove from the LCD
Do not apply direct pressure on the screen
Do not remove or modify any prongs from the power cord
Disconnect the power plug from the AC outlet when the power cord or plug is damaged
If the monitor case is damaged or the monitor malfunctions, do not try to repair yourself. Un-authorized repair will void your product warranty
Do not allow any object to rest on the power cord
Do not place this product in a high traffic environment where cord is exposed Always use the proper power cord with the correct plug adapter. If the power source is 120V AC, use a power cord that has UL and C-UL approvals. If the power source is 240V AC, use the tandem (T-blade) plug with a grounding that meets European country safety regulations (such as VDE for Germany)
Do not overload wall outlets or power cords. Ensure total units plugged into wall does not exceed 10 amperes
Ensure total current plugged into the extension cord does not exceed cords current rating
Place monitor in a well ventilated environment
Do not place monitor directly under sunlight or in cold, humid environments Keep monitor in a dust-free environment and away from strong electromagnetic fields
Page 3
Loading...