Tasco TA515M Series Instruction Manual

GEAR BENDER

TA515M Series

Instruction Manual

1

Thank you for purchasing this product.

 Read this

Safety Notes and Instruction Manual

thoroughly before using the product and ensure

that instructions therein are fully understood.

 This manual summarizes “

things that needs to be observed

” so that the product can be used by

everybody without any concern.

 Keep this manual handy for quick reference.
 If the product were to be rented or assigned to somebody else, provide thorough instructions and

deliver the product together with this manual.

Contents

1. For Using the Product Safely・・・・・・・・・・・・ 2 - 3

2. Part Name and Function・・・・・・・・・・・・・・・ 4

3. Preparation・・・・・・・・・・・・・・・・・・・・ 5 - 6

4. Usage・・・・・・・・・・・・・・・・・・・・・・・ 6 – 8

5. Primary Specification・・・・・・・・・・・・・・・ 9

Warranty Certificate・・・・・・・・・・・・・・・・・・ 10

Safety Notes

(Should be observed)

Always observe these instructions as they are meant to prevent harms to the operator and other
persons, as well as damages t o the properties.

Notes contained in this manual are classified as WARNING and CAUTION.
Instructions given in the WARNING column summarize and refer to those that may result in
a death or serious injury if they are neglected. However, instructions classified as

CAUTION may also lead to serious consequences depending on the

circumstance if

neglected.

Observe all instructions w i thout fail because they refer to important matters concerning safety.

Before using the product, it should be understood that the supplier shall not be held liable for the

product failures, ot

her problems and damages suffered by the customer or a third person, while

using the product erroneo usly or properly, unless the liability is affirmed lega l l y.

2

Safety Notes

1.For Using the Product Safely



General instructions

WARNING

Do not modify the machine or use it f or pur poses other th a n t hose intended.

[If neglected]

The machine may fail or cause a n accident, resulting in an injur y of the operator.

WARNING

Wear clothing suitable for the task.

Do not wear the baggy clothes and accessories such as a necklace to prevent them from getting

caught in the moving part .
Put on safety shoes, a helmet, protective eyeglasses, pr otective clothes, etc. in performing a task.

[If neglected]

The operator may suffer an injury.

WARNING

Do not touch the movi ng part duri ng work.

[If neglected]

The operator may suffer an injury.

WARNING

Carry out the work on a level pl ace.

[If neglected]

The operator may suffer an injury by moving the machine accidentally.

WARNING

Allow sufficient space for usi

ng the machine in consideration of length of a

copper tube and its rolling.

[If neglected]

It may not only damage the surroundings but also people around the machine may be hurt.

WARNING

Keep the machine in a location where children and animals wou

ld not be

present.

[If neglected]

Children or animals may s uffer an injury by touching or moving the machine.

CAUTION

Avoid using the product forcibly so that a work can be performed safely and

efficiently.

[If neglected]

The machine may fail or cause a n accident, resulting in an injur y of the operator.

CAUTION

Do not sit on and shake the machine.

[If neglected]

The machine may fail or cause a n accident, resulting in an injur y of the operator.

3

CAUTION

Do not expose the machi ne t o wind and rain.

[If neglected]

It can be a cause of failure.

CAUTION

Keep the workplace clean.

[If neglected]

A workplace or a workbench that is littered can cause an accident.

CAUTION

Do not use parts other than those designated by the supplier fo

r

replacement and other p ur poses.

[If neglected]

It can be a cause of failure.