Targus iPAQ3900, PA745U User Manual
BRUSSELS HANNOVER BARCELONA TOKYO MILANO AMSTERDAM SINGAPORE LONDON PARIS NEW YORK LOS ANGELES TORONTO HONG KONG SYDNEY
Targus Click N Type
for Compaq iPAQ 3800/3900
USER’S GUIDE
Making Your Mobile Life Easier.
Making Your Mobile Life Easier.
Visit our Web site at: www.targus.com
Features and specifications are subject to change without notice. © 2002 Targus Corp.
400-0090-001A
Targus Click N Type
Congratulations on your purchase of the Targus Click N Type.
The Click N Type is a convenient and ultra-portable keyboard
and mouse for your PDA.
With the Click N Type you can:
• Enter text directly into your PDA.
• Use the 8-way navigation button to simulate mouse movement.
• Define and use the function keys to quickly execute commands
and options.
• Take a keyboard and mouse with you whenever you travel with
your PDA.
In addition to this user’s guide, this package contains the Targus
Click N Type and the driver software CD-ROM.
Installing the Driver
To install the driver software for the Click N Type, you need:
• A desktop or notebook computer with the Windows® 95/98/
Me/2000/XP or Windows NT® 4.0 operating system
• Microsoft® ActiveSync® 3.1 or higher on your computer (for
copying files to your PDA). For the most current version of
Microsoft ActiveSync, go to: http://www.microsoft.com/mobile
• At least 24K bytes of free memory on your PDA.
1 Connect your PDA to your computer, if it’s not already
connected, and synchronize to back up your files.
2 Disable any previously installed keyboard software on your
PDA.
3
3 Insert the driver software CD-ROM into your computer’s
CD-ROM drive.
4 Click Start, Run, then enter D:\Setup.exe (where D: is the
path of your CD-ROM drive) and then click OK.
The Click N Type Installation screen appears.
PDA Mouse Click N Type Installation screen
5 Click Install.
6 Follow the on-screen instructions to complete installation.
7 Synchronize to copy the driver to your PDA.
After synchronization, the Click N Type icon appears in the
Applications screen on your PDA. You can now connect the
Click N Type to your PDA.
4
Connecting the Click N Type to
You r P D A
Once you have installed the driver, you can connect the Click N
Type to your PDA. To do this:
1 Turn off your PDA (if it’s turned on).
2 Hold your PDA in one hand and the Click N Type in your
other hand.
Holding your PDA and the Click N Type
5
3 Align your PDA with the keyboard connector, located at the
top of the Click N Type.
Keyboard
connector
Aligning your PDA with the keyboard connector
4 Gently slide your PDA into the keyboard connector until you
hear a “click.”
When you connect the Click N Type, your PDA automatically
turns on and you can begin typing.
CAUTION: Always use the keyboard connector as a guide
when connecting and disconnecting your PDA to avoid
possible damage to your device or the Click N Type.
6
Loading...