Targus ACB20US Install Manual

B

RUSSELS HANNOVER

B T

M

ILAN AMSTERDAM SINGAPORE LONDON PARIS NEW YORK LOS ANGELES

T H

ONG KONG SYDNEY

Bluetooth Adapter

®

®

ARCELONA OKYO ORONTO

Tar gu s U SB

INSTALL GUIDE

Making Your Mobile Life Easier.

Making Your Mobile Life Easier.

Visit our Web site at: www.targus.com

Features and specifications are subject to change without notice

© 2005 Targus Group International, Inc. and Targus, Inc.

ACB10-ACB20 / 400-0207-001A

TARGUS USB BLUETOOTH

ADAPTER

Introduction

Congratulations on your purchase of the Targus USB
Bluetooth Adapter. This adapter enables your PC or laptop
to wirelessly connect to Bluetooth devices up to 33 feet
(10m) with model ACB10US, or 328 feet (100m)
connecting to other Class1 devices with model ACB20US .

Devices that utilize Bluetooth are either Class 1 with a
range of 100m or Class 2 with a range of 10m. This range
will vary depending on the environment. To connect at
100m, both devices need to be Class 1 devices. For
example, a Class 2 Bluetooth mouse will have a range of
10m even when connecting to a Class 1 Bluetooth adapter.

The adapter allows you to connect up to seven Bluetooth
devices including PDAs, smart phones, keyboards, mice,
printers, and other Bluetooth 1.1/1.2 compliant devices. It
also has built-in 128-bit encryption and authentication,
enabling secure connections between Bluetooth devices
and installs easily with Plug-and-Play convenience.

Contents

In addition to this quick installation guide, the package
contains:

• Targus USB Bluetooth Adapter (Model ACB10US or
ACB20US)

• CD-ROM for installation software and documentation

2

System Requirements

• USB v1.1 compliant port

•Windows

®

Me/2000/XP operating system

USB Adapter Installation

To use the Targus USB Bluetooth Adapter, you must first
install the adapter software onto your computer.

WARNING: You must install the adapter software
BEFORE connecting it to your computer. Otherwise,
the adapter will not work properly.

Installing the Software

1 Turn on your computer.

2 Insert the driver software CD into your computer’s

CD-ROM drive.

3 If setup does not begin automatically, click Start, Run,

then enter D:\Setup.exe (where D: is the path of your CD-
ROM drive) and then click OK.

The InstallShield Wizard will start.

4Click Next.

5 The ‘License Agreement’ screen appears.

6 Read and if you agree with the License Agreement, Click

‘I accept the terms in the License Agreement’.

7Click Next.

8 Follow the onscreen instructions.

3