External Drive
for Combo DVD/CD-RW-ROM and DVD-ROM
Making Your Mobile Life Easier.
Visit our Web site at: www.targus.com
Features and specifications are subject to change without notice. © 2002 Targus Corp.
400-0084-001A
BRUSSELS HANNOVER BARCELONA TOKYO MILANO AMSTERDAM SINGAPORE LONDON PARIS NEW YORK LOS ANGELES TORONTO HONG KONG SYDNEY
USER’S GUIDE
Making Your Mobile Life Easier.
Contents
External Drive.............................................................................................................. 4
Introduction ............................................................................................................................................. 4
System Requirements.............................................................................................................................. 5
Connecting the External Drive to Your Computer ...................................................... 6
Installing the Driver Software...................................................................................... 7
Windows® 98 Operating System............................................................................................................ 7
Windows® Me Operating System .......................................................................................................... 8
Windows® 2000/XP Operating System ................................................................................................. 8
Windows NT® 4.0 Operating System .................................................................................................... 9
Using the External Drive ........................................................................................... 10
Inserting and Removing a Disc............................................................................................................. 10
Playing Audio CDs ............................................................................................................................... 11
Reading Data DVDs ............................................................................................................................. 11
Playing DVD Movies............................................................................................................................ 12
Hot Swapping........................................................................................................................................ 12
Writing and Rewriting CDs (Model NW930 Only) .............................................................................. 12
Things to Remember.................................................................................................. 13
Operating Hints..................................................................................................................................... 13
Safety Measures .................................................................................................................................... 13
2
Specifications............................................................................................................. 14
Troubleshooting......................................................................................................... 16
Solving General Problems .................................................................................................................... 16
Changing the Drive Letter Assignment ................................................................................................ 17
Writing and Rewriting Problems .......................................................................................................... 17
Technical Support...................................................................................................... 17
Product Registration ............................................................................................................................. 19
War ran ty ................................................................................................................................................ 19
Regulatory Compliance ........................................................................................................................ 19
FCC (Federal Communications Commission)...................................................................................... 19
3
External Drive
Introduction
Thank you for purchasing a Targus Noteworthy External Drive. Light weight and ultra-portable, the
external DVD-ROM and Combo DVD/CD-RW-ROM drives run off your computer’s power supply,
eliminating the need for an AC adapter. After installing a external drive, you can use it at any time by
inserting the PC Card cable into your computer’s Type II PC Card slot.
This user’s guide describes how to connect the external drive to your computer, install default and
enhanced performance drivers (Windows® 2000 operating system only) and how to operate the drive
for the following models:
• NW930 – Combo DVD/CD-RW-ROM Drive
• NWDVD03 – DVD-ROM Drive
In addition to this user’s guide, depending on the model that you purchased, this package contains:
NW930 NWDVD03
• Combo DVD/CD-RW-ROM drive • DVD-ROM drive
• PC Card cable • PC Card cable
• AC adapter • AC adapter
• Driver software CD • Driver software CD
• DVD Player CD • DVD Player CD
• Easy CD Creator
™
software CD-ROM
4
System Requirements
To use the external drive, your computer must meet the following hardware requirements and run one
of the operating systems listed in the table below.
Hardware Operating System
•PC with an Intel® Pentium® processor or
equivalent and a hard disk drive
• 64 MB RAM or higher, depending on the
operating system
• PCMCIA Card interface (type II or higher)
• CD-ROM drive
NOTES: The external drive receives its power from your computer’s PC Card slot, which must be in full
compliance with PC Card specifications and supply a minimum of 5V/1A of power.
For the DVD movie playback feature to work, you must have a DVD-ROM decoder installed in your
computer or a player application, such as DVDExpress or Power DVD, set up under the Windows® 98/
Me/2000/XP operating system. DVD movie playback is not available with the Windows NT® operating
system.
•Windows® 98/Me/2000/XP
®
• Windows NT
4.0
5
Connecting the External Drive to Your Computer
1 Turn off your computer and any devices connected to it.
2 Attach the connector end of the PC Card cable to the external drive’s PC Card cable port.
PC Card
end
Connector
end
PC Card cable
3 Plug the PC Card end of the cable into any Type II PC Card slot on your computer.
4 Connect the supplied AC adapter to the AC power jack on the external drive and plug the
adapter into a working power outlet.
NOTE: For the best results, charge the drive using the supplied AC adapter for at least one hour before
connecting it to your computer and installing the driver software.
You can now begin installing the driver software.
6
Installing the Driver Software
After connecting the external drive to your computer, you can now install the driver software for your
operating system.
NOTES: Installing the external drive may change internal drive letter assignments. To keep the original
drive letter assignments, you can change the letter for the combo drive. See “Changing the Drive
Letter Assignment” on page 17.
®
To write and rewrite CDs, if you are running the Windows
also install the supplied CD-writing software. See “Writing and Rewriting CDs (Model NW930 Only)”
on page 12.
Windows® 98 Operating System
1 Turn on your computer.
2 Insert the driver software CD into your computer’s CD-ROM drive.
The Add New Hardware Wizard appears.
3Click
Next.
The locate driver screen appears.
98/Me/2000 operating systems, you must
Sample New Hardware Wizard locate driver screen
4 Select “Search for the best driver for your device (Recommended),” and click Next.
The search driver location screen appears.
7
5 Select “CD-ROM drive” and click
6Click
7Click
8Click
You are now ready to begin using your external drive.
Next to confirm selection of the driver.
The ready to install screen appears.
Next.
The driver loads from the CD-ROM.
Finish to complete the driver installation.
Next.
Windows® Me Operating System
1 Turn on your computer.
2 Insert the driver software CD into your computer’s CD-ROM drive.
The Add New Hardware Wizard appears.
3 Select “Automatic search for a better driver (Recommended)” and click
The driver loads from the CD-ROM.
4Click
You are now ready to begin using your external drive.
Finish to complete the driver installation.
Next.
Windows® 2000/XP Operating System
Installing the Default Driver
Installing the default driver from your operating system allows for instant access to your drive and
uses fewer resources, such as memory and drive space, allowing your computer to run more
efficiently.
To install the default drivers:
1 Turn on your computer.
2 Insert the driver software CD into your computer’s CD-ROM drive.
The Found New Hardware Wizard appears and the operating system installs the drivers
automatically. No other steps are necessary.
You are now ready to begin using your external drive.
8
Upgrading to the Enhanced Performance Driver
Upgrading to the enhanced driver from the supplied CD enables you to view DVD movies and
increases DVD performance. To do this:
1 From your desktop, right-click the
2 Select the
3Locate
4 Double-click
The Upgrade Device Driver Wizard appears.
5Click
The Install Hardware Device Drivers screen appears.
6 Select “Search for a suitable driver from my device (recommended)” and click
The Locate Driver Files screen appears.
7 Insert the driver software CD into your computer’s CD-ROM drive, select
that a check mark appears in the check box and click
8Click
9 If the Digital Signature Not Found dialogue box appears, click
The enhanced performance driver loads from the CD-ROM.
10 Click
Hardware tab and click Device Manager.
IDE ATA/ATAPI Controller and click + to expand the list.
PCMCIA IDE/ATAPI Controller, select the Driver tab and click Update Driver.
Next.
Next again to confirm selection of the driver.
Finish to complete the driver installation.
My Computer icon and click Properties.
CD-ROM drives so
Next.
Yes to continue.
Windows NT® 4.0 Operating System
1 Turn on your computer.
2 Insert the driver software CD into your computer’s CD-ROM drive.
3Click
Start, Run then enter D:\DOS_NT40\SETUP.EXE (where D: is the path of your CD-ROM
drive) and click
The driver software agreement screen appears.
OK.
Next.
9
4Click
5Click Next to keep “C:\Program Files\TARGUS\Cable II PCMCIA” as the destination folder.
You are now ready to begin using your external drive.
OK to accept the agreement and continue setup, or Cancel to exit setup.
If you choose to continue setup, the Choose Destination Location screen appears.
Choose Destination Location screen
To copy the files into a different directory, click
Continue to confirm the new destination folder.
click
To complete the installation, follow the onscreen instructions.
Browse and locate the desired path name, then
Using the External Drive
Inserting and Removing a Disc
1 Turn on your computer and press the eject button to open the tray.
2 To insert a disc, hold it by the edges and place it in the tray with the readable (plain) side down.
If you are using a high capacity disc, place the side of the disc you want the drive to read facing
down. Then, gently press down on the disc until it snaps into place.
3 To remove a disc, grasp it by the edges and gently pull up until the disc is released.
CAUTION: Avoid touching the readable (plain) side(s) of a disc. Touching the readable side of the disc
may cause read errors, poor performance or failed operation.
10
4 Close the media tray by gently pushing it until it “clicks” into place.
PC Card
cable port
Audio out
jack
Optional power
connection
Media
tray
Removing a Disc Using Emergency Eject
If you need to remove a disc when there is no power to your computer, you can open the tray manually.
To do this, gently insert a slim, straight object, such as a bent-open paper clip, into the emergency eject
hole until you feel some resistance. Remove the paper clip and carefully open the tray by hand.
CD eject
button
Indicator
light
External drive
Emergency
eject hole
Playing Audio CDs
You can play audio CDs on your external drive by using the CD Player application included in the
operating system. To hear the audio, you can either:
• Connect headphones or external speakers to the Audio Out jack on the external drive.
• Connect an audio cable from the Audio Out jack on the external drive to the Line In jack on your
computer.
Reading Data DVDs
You can read data DVDs without installing any special software.
11
Playing DVD Movies
To play back movies, you must have a DVD-ROM decoder installed in your computer or have a DVD
player application set up under the Windows
NOTE: The Windows NT® operating system does not support DVD movie playback.
®
operating system.
Hot Swapping
You can connect and disconnect the external drive while the computer is running. To attach the
external drive, just insert the PC Card cable into your computer’s Type II PC Card slot.
NOTE: If you are running the Windows NT® operating system, you must have the Softex Card
Execuitve 2.0 card and socket services software installed on your computer in order to hot swap the
drive.
To remove the PC Card cable while the computer is turned on:
1 Double-click the
2 Double-click
3 Highlight the PC Card cable and click
The message “You may now safely remove the card” appears.
4 Remove the PC Card cable from your computer.
PC Card icon in the system tray or click Start, Settings, and Control Panel.
PC Card (PCMCIA).
Stop.
Writing and Rewriting CDs (Model NW930 Only)
To write and rewrite CDs, if you are running the Windows® 98/Me/2000/XP operating systems, you
must install writing software. For your convenience, the Easy CD Creator software is supplied. To
install the Easy CD Creator software:
1 Insert the supplied CD-ROM into the external drive (or your computer’s internal CD-ROM
drive if it has one).
2 If setup does not begin automatically, click
the path of the CD-ROM or combo drive) and then click
3 Follow the on-screen instructions to complete installation.
For more information on how to use the Easy CD Creator application, refer to the documentation on
the CD-ROM.
Start, then Run, and enter D:\setup.exe (where D: is
OK.
12
Things to Remember
Operating Hints
• Use the emergency eject mechanism only if the external drive is not connected to your computer or
if the computer’s battery is flat and there is no power available for the eject button. Excessive use of
the emergency eject mechanism may damage it and cause the mechanism to stop working.
• Never press the eject button while the drive is accessing a disc.
• The external drive operates in either an upright or horizontal position. To prevent possible damage,
avoid changing the drive’s position while it is in use.
• Avoid using or storing the external drive in extreme temperatures. The environmental specifications
while operating are 50-113 F (10-45 C).
• After transporting the external drive, allow it to reach room temperature before using it.
CAUTION: Changes in temperature during transport, particularly from a cool to a warmer temperature,
can cause condensation to form in the drive and may result in operating problems. Allowing the drive
to reach room temperature helps to prevent this.
• Avoid using the external drive in dusty or humid surroundings.
• A short delay is normal before the external drive reads an audio CD, CD-ROM, DVD or
DVD-ROM.
WARNING: Never clean the external drive with a commercially available CD or CD-ROM cleaning set as
doing so may cause damage to the drive.
Safety Measures
• Any attempt to disassemble, adjust or repair the external drive may result in exposure to laser light
or other safety hazards.
• This is a Class 1 Laser Product. This product complies with all applicable safety standards, DHHS
Rules 21 CFR Chapter 1, Sub chapter J. The laser beam generated is totally enclosed during all
modes of normal operation, and no hazardous laser light is emitted from the drive.
13
Specifications
NOTE: Specifications are for all models unless indicated otherwise.
Models
NW930
NWDVD03
Dimensions
Length: 6.81 inches (17.3 cm)
Width: 5.35 inches (13.6 cm)
Height: 0.78 inches (2 cm)
Weight
0.9 pounds (450 g)
Connection to the computer
PC Card cable via PC Card slot (PCMCIA, Type II)
Voltage
DC + 5V± 5%
Media Formats
The external drive reads formats according to the following CD (compact disc) and DVD (digital
versatile disc) standards:
®
•MS-DOS
CDs (High Sierra, Mode 1 & Mode
2 complying with ISO 9660)
• Data-CDs (Joliet) • UDF (Universal Disc Format) • CD-TEXT, CD-EXTRA
• CD-ROM XA • Audio CDs • Video CDs
• Mixed Mode CDs • CD-Digital Audio • DVD-ROM, DVD-R
• Enhanced CD • i-trax CD • DVD-Video
operating system data
• Kodak Photo CDs (single- and
multi-session)
• CDI, CDI-Ready, CD-Midi,
CD-R, CD-RW, CD Plus
14
Storage Capacity
DVD-ROM type description DVD-5 DVD-9 DVD-10 DVD-18
Capacity according to the manufacturer 4.7 GB 8.5 GB 9.4 GB 17 GB
Actual capacity 4.38 GB 7.96 GB 8.75 GB 15.92 GB
Written sides 1122
Layers per side (referring to the
1212
information-carrying layer of the disc)
Data Buffer
NW930 DVD: 512 kB
CD-RW: 128 kB
NWDVD03 512 kB
Access Time
NW930 DVD: 180 ms (average)
CD-RW: 220 ms (random)
NWDVD03 DVD: 130 ms (average)
CD: 95 ms (average)
Maximum Speed
NW930 CD-Mode: 24x CD speed (3,600 KB/s)
8x CD-R write speed
4x CD-RW overwrite speed
DVD-Mode: 8x DVD speed (8,112 KB/s)
NWDVD03 CD-Mode: 24x CD speed (3,600 KB/s)
DVD-Mode: 8x DVD speed (10,816 KB/s)
Supported Disc Sizes (Model NW930 Only)
Write: 12 cm (4.72 inches)
Read: 8 cm (3.15 inches)
12 cm (4.72 inches)
15
Disc Write Modes (Model NW930 Only)
DAO, SAO, TAO
Variable and Fixed Packet Writing
Troubleshooting
To view Frequently Asked Questions and download Driver updates, visit our Web site at:
http://www.targus.com/support
Solving General Problems
If the external drive is not functioning:
• Verify that your system meets the hardware requirements. See “System Requirements” on page 5.
• Check that the drive is turned on and getting power.
• Make sure the cable is firmly attached to the drive and that the PC Card is fully inserted into the PC
Card slot of your computer.
• Remove the driver software and reinstall it. To do this:
1 Insert the driver software CD into your computer’s CD-ROM drive.
2 From your desktop, double-click the
3 Select the CD-ROM drive, double-click the
instructions.
If there is no sound when using the external drive, check that:
• The disc you are using is an audio disc or supplies audio output.
• The headphones/speakers are correctly connected.
• The cable is in good condition.
• The volume is turned up.
• The audio software is installed.
My Computer icon.
DriverRemove.exe file and follow the on-screen
16
Changing the Drive Letter Assignment
The following steps describe how to change the drive letter for the external drive under the Windows®
95/98/Me operating system.
1Click
2Click
3 Click either
4Click
5 Under Reserved Drive Letter enter the letter you want to represent the external drive.
6Click
NOTE: You must restart your computer for the changes to take effect.
Start, Settings, and then Control Panel.
System and select the Device Manager tab.
DVD-ROM or Drive, then external drive.
Properties, then Settings.
The current drive letter assignment and the reserved drive letters appear.
OK.
Writing and Rewriting Problems
If the external drive is not writing or rewriting data properly, try the following:
• Reduce the write/rewrite speed from 4x to 2x.
• Disable all Advanced Power Management (APM) functions.
• Remove or disable all Terminate and Stay Resident (TSR) programs, such as your anti-virus
program.
• Defragment your hard disk drive.
Technical Support
In the unlikely event that you encounter a problem with your Targus accessory, please contact our
technical support team at:
Email: techsupport@targus.com
Internet: http://www.targus.com/support.asp
Have the following information available:
• The serial number of your external drive (located on the back of the drive).
• The name and model of your computer and details of its hardware specification.
17
• The name and version number of your operating system and of the software that has the problem.
• A detailed description of the problem including exact error messages and when these errors occur.
• What you do to replicate the problem.
• If this is a new problem, whether you have recently changed your system configuration and in what
way.
Our knowledgeable staff is also available to answer your questions through one of the following
telephone numbers.
US
Monday through Friday, 8:00 a.m. (08:00) to 8:00 p.m. (20:00) Eastern time:
800-283-6325
Canada
Monday through Friday, 9:00 a.m. (09:00) to 5:00 p.m. (17:00) Eastern time:
888-827-4877
Europe
Belgium +32 0 02-717-2451
Denmark +45 0 35-25-8751
France +33 0 1-64-53-9151
Germany +49 0 21-16-579-1151
Italy +39 0 24-827-1151
Netherlands +31 0 53-484-9470
Spain +34 0 91-745-6221
Sweden +46 0 8-751-4058
Switzerland +41 0 1-212-0007
United Kingdom +44 0 20-7744-0330
Eastern Europe & others +31 0 53-484-9479
18
Product Registration
For more efficient customer service and to activate the product’s warranty, Targus recommends that you register your
Targus accessory shortly after purchasing it.
To register your Targus accessory, go to: http://www.targus.com/registration.asp
You will need to provide your full name, email address, phone number, and company information (if applicable).
Warranty
Targus warrants this product to be free from defects in materials and workmanship for one year. If your Targus
accessory is found to be defective within that time, we will promptly repair or replace it. This warranty does not cover
accidental damage, wear and tear, or consequential or incidental loss. Under no conditions is Targus liable for loss of,
or damage to, a computer; nor loss of, or damage to, programs, records, or data; nor any consequential or incidental
damages, even if Targus has been informed of their possibility. This warranty does not affect your statutory rights.
Warranty Registration at http://www.targus.com/registration.asp
Regulatory Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) This device must accept any interference received, including
interference that may cause undesired operation.
FCC (Federal Communications Commission)
Declaration of Conformity
This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of
the FCC Rules, and RS 210 Regulations (Canada). These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Move the computer away from the receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio technician for help
MS-DOS, Windows and Windows NT are registered trademarks of Micr osoft Corporation. Easy CD Creator is a trade mark of Roxio, Inc. Mediamantics
is a trademark of National Semiconducto r Corp. All other trademarks are the property of their respective ow ners.
19
Loading...