Targa LCD-Display 19 User Manual

LCD-DISPLAY 19"

GB

User manual

IE

CY

Targa Visionary LCD 19-6 Wide

Targa Visionary LCD 19-6 Wide

Operating Notes

First of all, many thanks for choosing this high-end multiscan
monitor. Before starting installation, please read this manual
completely.

Intended Use

This TFT monitor is an IT electronic device. It may only be used for
private use, not industrial or other commercial purposes.
Furthermore, the device may not be used outdoors or in tropical
climates. Only connection cables and external devices may be used
that comply with safety standards and the electromagnetic
compatibility and shielding quality of this device. This device fulfils
all that relates to CE Conformity, relevant norms and standards.
Any modifications to the equipment other than recommended
changes by the manufacturer may lead to the result that these
directives are not met any more. Only use the accessories
recommended by the manufacturer.

English

Conformity

The LCD screen LCD 19-6 Wide has been tested
and approved for compliance with the basic and
other relevant requirements of the EMC Directive
2004/108/EC, as well as the Low-voltage Directive
2006/95/EC.

1

Targa Visionary LCD 19-6 Wide

Table of Contents

English

Operating Notes............................................................................... 1

Intended Use ............................................................................................1

Conformity ................................................................................................1

Table of Contents ............................................................................ 2

Safety Information............................................................................ 3

Warnings................................................................................................... 3

Disposal of Old Devices ...........................................................................5

Getting started ................................................................................. 6

Back Panel Connectors ............................................................................ 7

Quick Guide .............................................................................................. 7

Setting the Resolution ..............................................................................8

Front Panel Controls................................................................................. 9

Setting the Menu Language ...................................................................10

Button Function Overview ......................................................................10

OSD Menu ..................................................................................... 12

Advanced....................................................................................... 16

Supported resolutions............................................................................. 16

Wall-Mounting.........................................................................................17

Technical Specifications .........................................................................18

Troubleshooting...................................................................................... 19

Pixel Error Classes .................................................................................19

2

Targa Visionary LCD 19-6 Wide

Safety Information

During the manufacturing and testing of this monitor, the safety of
the future user was our main goal. However, inadequate operation
or installation can cause damage to the device and harm to the
user. Therefore, please first read the following warnings prior to
starting with its installation. Proceed exactly as described in the
instructions. Keep this manual for any future reference.

Warnings

 Connect the monitor to a grounded wall outlet only, with a

rating identical to those on the label of the back panel of the
unit. If you are not sure about the electrical output, please
contact a qualified electrician or your local electrical company.

 Warning: The wall outlet must be within easy reach and next to

the device.

 Do not use any extension cords.

English

 Only use accessories recommended by the manufacturer

(cables, stand, cart, etc.).

 Move the device carefully to avoid it from tipping over.

 For your own safety, remember that the monitor will be fully

separated from the mains only when the power cord has been
disconnected from the wall outlet.

 During a thunderstorm, unplug the device from the mains

power by unplugging the power cord. Do this also when you are
not going to use the device for a long period of time.

Do not attempt to repair the monitor yourself. Any repair must



be performed by a qualified technician.

3

Targa Visionary LCD 19-6 Wide



English



 Place the monitor in a clean, dry environment.

 Do not place any recipients containing liquids (beverages,

 Do not place any fire sources (e.g. burning candles) on or near

 Disconnect the power supply immediately if liquid gets into the



Do not open the monitor’s housing.
components inside the device may produce an electric shock
even after the power cord has been disconnected.

Do not use the device if the casing is damaged. If this happens,
it must first be examined by authorized service personnel.

vases, etc.) onto or next to the device.

the device.

device and seek the help of a service technician.

Unplug the device from the mains before cleaning the monitor.
First spray an ammonia-free detergent onto a cloth to slightly
dampen it, and do not spray it onto the display itself.

The high-voltage

 Do not place the monitor next to any magnetic objects, electric

motors, TV sets or transformers.

 Do not place the device near heat sources such as radiators,

ovens or other appliances emitting heat.

Do not place heavy objects on the cable or power supply.



Position the cables so that they cannot obstruct or catch
anyone.

 The output connectors of the connected devices must be within

easy reach and next to the monitor.

Always make sure there is sufficient ventilation. Do not place



any device onto the display preventing proper ventilation and
cooling.

4

Targa Visionary LCD 19-6 Wide

If you notice any smoke, unusual noise or strange smells,



switch off the LCD display immediately and pull the plug out
from the wall outlet. Contact customer service. It is very
dangerous to continue using the LCD display under these
conditions.

 To avoid electric shock or fire, prevent this product from being

exposed to rain, dripping or splashing.

Children: electrical appliances do not belong in the hands of



children. Do not allow children to use electrical devices when
not under supervision. Children may not comprehend the
presence of potential risks. Keep all packaging away from
children as this can cause suffocation.

 If you are not using the device within the Republic of Germany,

you must observe the regulations and laws in the country of
use.

Disposal of Old Devices

Devices marked with this symbol are subject to the
European Directive 2002/96/EC. All electric and electronic
devices must be disposed of separately from household

waste at established bodies. Avoid hazards to the
environment and dangers to your personal health by disposing of
the device properly. For further information about proper disposal,
contact your local government, disposal bodies or the shop where
you bought the device.

English

5

Targa Visionary LCD 19-6 Wide

Getting started

English

Mount the supplied socket to the base of your LCD 19-6 Wide as
indicated on the bottom of the base.

Please check that delivery contents are complete using the list
below:

1 - Monitor

2 - VGA cable

3 - Audio cable

4 - Power cord

5 - User’s Manual

(not illustrated)

6

Back Panel Connectors

Targa Visionary LCD 19-6 Wide

6 7 8 9

Quick Guide

1. Connecting the Video Cable

Power your monitor and computer off.

Use the VGA cable (2) to connect the computer to the port (9)
of the monitor.

2. Connecting the Audio Cable

Use the audio cable (3) to connect the computer’s Audio Out
port to the audio input (8) of your monitor.

3. Connecting the Power Cord

Connect the power cord (4) to the power receptacle (7) of the
monitor. Connect the other end to a wall outlet.

4. Powering On

To power the monitor on, toggle the power switch (6) located
on the back panel of the unit to “I”. If the front-panel power
indicator (16) does not light, press the On/Standby switch (15)
on the front panel of the unit.

English

7

Targa Visionary LCD 19-6 Wide

Setting the Resolution

The recommended screen resolution for your LCD 19-6 Wide is

English

1440 x 900 (max. refresh rate 75 Hz). In the following we will
explain the resolution setting for the operating systems
Windows

For Microsoft

For Microsoft

®

XP and Windows Vista™.

®

Windows® XP:

- Right-click on the Desktop.

- Click on “Properties”.

- Click on the “Settings” tab.

- Use the ruler to select the proper screen resolution.

- Confirm the setting by clicking “OK”.

®

Windows Vista™:

- Right-click on the Desktop.

- Click on “Customize”.

- Click on “Display”.

- Use the ruler to select the proper screen resolution.

- Confirm the setting by clicking “OK”.

If the recommended resolution of 1440 x 900 is not
available on your computer, please update the driver of
the graphics card. Contact the manufacturer of the
computer or the graphics card.

8

Front Panel Controls

Targa Visionary LCD 19-6 Wide

11 13 15
12 14 16

11. Display / hide the OSD menu.

12. Decrease value / navigate downwards

13. Increase value / navigate upwards

English

14. Confirm setting

15. On/Standby Switch

16. Power indicator

9

Targa Visionary LCD 19-6 Wide

Setting the Menu Language

You can display the OSD (On Screen Display) menu in your local

English

language. Proceed as follows:

1. Press button 1 (11) on the monitor.

2. Press the

 button (12) to select the menu option “Setup

Menu”.

3. Press button 2 (14).

The “Setup Menu” opens and the item “Language Select”
should be highlighted otherwise press the

 (12) or  (13)

buttons to select it.

4. Press button 2 (14).

5. Press the

 button (12) to scroll downwards or press  (13)

to scroll upwards to select the desired display language.

6. Press button 2 (14) to confirm your selection.

7. Wait until the menu disappears or press button 1 (11) twice

to exit the menu immediately.

Button Function Overview

You can use the control buttons to access the most common

settings directly.

Setting Brightness and Contrast

1. Press the

 (12) or  (13) buttons. The brightness and

contrast menu will appear.

2. Press the

 (12) or  (13) buttons to select a menu option

(Brightness will be disabled while DCR is on).

3. Press button 2 (14) to enable the selected menu item.

10

Targa Visionary LCD 19-6 Wide

4. Press the  (12) or  (13) buttons to select the desired

value.

5. Wait until the menu disappears or press button 1 (11) twice

to exit the menu immediately.

DCR means „Dynamic Contrast Ratio“ and offers an
optimum contrast by adjusting the display backlight
automatically depending on the picture contents.

Auto Image Adjust

Automatically adjusts the settings for the horizontal and vertical
position, the horizontal size as well as the fine control and

sharpness.
To do this, press button 2.

Locking the On/Standby Switch

English

Press and hold the 1 and

 buttons simultaneously until the status

bar is completed to enable or disable the On/Standby switch lock.
The lock will disable the Power On/Standby switch (15) located on

the front panel of the device.

OSD Lock

Press and hold the 1 and

 buttons simultaneously until the status

bar is completed to enable or disable the OSD lock. The OSD lock

will prevent the OSD menu from being displayed.

11

Targa Visionary LCD 19-6 Wide

OSD Menu

English

Via the OSD menu you can access multiple settings to customize
the LCD 19-6 Wide according to your and your computer’s

requirements.

Use the buttons 11 to 14 (as described on page 9) to navigate the

menu.

Start with the main menu by pressing button 1 on the monitor. Press
the

confirm the selection.

 and  buttons to choose a menu item, and press button 2 to

12

Auto Fit

Automatically adjusts the settings for the horizontal and
vertical position, the horizontal size as well as the fine

control and sharpness.

Targa Visionary LCD 19-6 Wide

Contrast/Brightness

Opens the Contrast and Brightness menu.

Press the
press button 2 to confirm. Then press the

 and  buttons to choose an option and

 or  buttons

to select the desired value. The Brightness option will be

disabled while DCR is on.

DCR means „Dynamic Contrast Ratio“ and offers an
optimum contrast by adjusting the display backlight

automatically depending on the picture contents.

Audio Adjust

Press the

 and  buttons to choose between the

options Volume and Mute. Press 2 to confirm. Press
or

 to change the value.

The option Volume allows you to adjust the volume of the
built-in speaker, the option “Mute” lets you disable the
sound.

Color Adjust

Choose between the following options:

9300K: Adds blue to the picture achieving a cooler white.

English



6500K: Adds red to the picture achieving a warmer white.

5400K: Adds green to the picture achieving a darker

colour tint.

User Adjust: Custom settings for red (R), green (G) and
blue (B). Press button 2 to select the desired colour and
press the

 or  buttons to adjust the selected colour.

13

Targa Visionary LCD 19-6 Wide

English

Information

Shows information about the input signal coming from
your computer’s graphics card as well as the model and

serial number of your monitor.

Manual Image Adjust:

To manually adjust the picture position.

Horizontal Size sets the horizontal picture size.

H./V. Position sets the horizontal and vertical picture

position.

Fine Tune sets the picture delay and therefore the

sharpness.

Sharpness (available only if the set resolution does not
match the recommended resolution of 1440x900). If

necessary, re-adjust the sharpness.

14

Setup Menu

Choose between the following options:

Language Select: Here you select the menu language.

Resolution Notice: If you enable this function, a

message will remind you every 30 seconds to set the
optimum picture resolution. This message appears only if
the set resolution does not match the recommended

resolution of 1440x900.

OSD Position: Press button 2 to toggle between
horizontal and vertical movement. Press

 or  to move

the OSD menu upwards, downwards, to the left or to the
right.

Targa Visionary LCD 19-6 Wide

OSD Time Out: After the set time, the OSD menu will
disappear if you don’t perform any further settings. You

can select values between 5, 15, 30 and 60 seconds.

OSD Background Off: Press button 2 to enable or

disable the coloured background for the OSD display.

English

Recall: Restores the factory-default video and audio

configuration. The selected language will not change.

15

Targa Visionary LCD 19-6 Wide

Advanced

English

Supported resolutions

Warning: Do not set your computer’s graphics card refresh rate to a

value exceeding the above maximum limits otherwise you risk

seriously damaging your monitor.

VESA 640 x 480 @ 75Hz
MAC 640 x 480 @ 67Hz
VGA 640 x 480 @ 70Hz
VGA 720 x 400 @ 70Hz
VESA 800 x 600 @ 56Hz
VESA 800 x 600 @ 60Hz
VESA 800 x 600 @ 72Hz
VESA 800 x 600 @ 75Hz
VESA 848 x 480 @ 60Hz
VESA 1024 x 768 @ 60Hz
MAC 1024 x 768 @ 70Hz
VESA 1024 x 768 @ 75Hz
VESA 1152 x 864 @ 75Hz
VESA 1280 x 960 @ 60Hz
VESA 1280 x 720 @ 60Hz
VESA 1280 x 768 @ 60Hz
VESA 1280 x 768 @ 75Hz
VESA 1280 x 1024 @ 60Hz
VESA 1280 x 1024 @ 75Hz
VESA 1360 x 768 @ 60Hz
VESA 1440 x 900 @ 60Hz
VESA 1440 x 900 @ 75Hz

16

Targa Visionary LCD 19-6 Wide

Wall-Mounting

You can mount your LCD 19-6 Wide to the wall by using a VESA
wall mount with a 100 x 100 mm receptacle. To do so, disassemble

the base as follows:

1. Power the device off and unplug all cables and connectors.
For the following steps you’ll need a conventional Philips

screwdriver.

2. Lie a soft cloth on an empty, level table and carefully place

the LCD 19-6 Wide with its front on it.

3. Loosen the monitor socket by carefully pushing the six

hooks inwards and pulling the socket towards the bottom.

4. Loosen the six screws located inside the base. Next you can
pull the base off downwards. You can remove the copper
loop as well as the cable contained in the base together with

the base.

5. Install the VESA wall mount on the back of the monitor.
Follow the installation instructions that came with your wall

mount kit.

English

Note: Keep the base, the socket and the screws in a safe place in

case you need to reassemble the base again.

17

Targa Visionary LCD 19-6 Wide

Technical Specifications

LCD Display

English

Power Management

Supported Resolution

Pixel size

Display Colours

Viewing angle

Inclination

Contrast Ratio

Brightness

Response time
Active Screen Area

Temperature

Compliance

19.0” Wide TFT (16:10)

Complies with Energy Star,
VESA DPMS-compatible = 1 W
Power on consumption: max. 45 W

max. 1440 x 900
Refresh rate max. 75 Hz

0.285 x 0.285 mm

16.2 million

160°/160° (CR > 10)

0°~20°

2000 : 1 (dynamic)

300 cd/m² (typical)
5 ms (typical)

410 mm x 256 mm
Operation: 0°C ~ + 35°C

Storage -20°C ~ +60°C

CE, TCO ’99, ISO 13406-2,
Energy-Star, TÜV GS,
Works with Windows Vista™
2002/95/EG (RoHS),

Input voltage

Input current

Speaker

VESA Wall Mount

Signal Input

Dimensions (WxHxD):

Weight

18

100-240 VAC, 50/60 Hz

1.5 A

1W x 2

Receptacle 100 x 100 mm

15-pin D-Sub VGA (Analogue)

443 mm x 382 mm x 200 mm

4.6 kg

Targa Visionary LCD 19-6 Wide

Troubleshooting

No power

 Make sure that the power cord is properly connected to the wall

outlet and that the cables to the monitor are fixed properly into

their respective ports.

 Connect a different electrical appliance to the wall outlet to

verify that it is working properly.

 Double-check all cable connections.

Power OK but no picture

 Make sure that the supplied video cable is properly connected

to the graphics card output connector of your computer and to

the monitor. If necessary, re-connect it.

 Adjust the brightness.

Wrong or distorted colours

 If a colour (red, green, blue) is missing, check the connection of

the video cable. Loose, bent or broken pins in the connector

may deteriorate the signal transmission.

 Connect the monitor to a different computer.

English

Pixel Error Classes

Pixels are single dots making up the picture that appears on the
screen. One pixel always consists of three sub-pixels for displaying

the basic colours (red, green and blue).

The Pixel Error Classes are rated from Level I (very good) to Level
IV (bad quality). Your LCD 19-6 Wide belongs to Error Class II and
therefore offers a high-quality display. Within the Error Classes a
limited number of pixel may present errors. There are three types of

errors:
Type 1: Continuous lighting pixel (a bright, white dot), even when

it should not light.

19

Targa Visionary LCD 19-6 Wide

Type 2: Non-lighting pixel (a dark or black dot) even when it

should light.

English

Type 3: Abnormal or defective sub-pixels of the basic colours

Furthermore, a so-called cluster (a matrix of 5x5 pixel) may contain

a limited number of erroneous pixel only.

For Error Class II, for each 1 million pixel only 2 pixel may contain
errors of Type 1, Type 2 and Cluster; it may present up to 5

erroneous pixels of Type 3 (see the following table).

Considering the recommended resolution of your LCD 19-6 Wide
(1440 x 900) it contains 1,296,000 pixel. From this value we can
deduce the maximum amount of erroneous pixel (see the following

table).

(e.g. steady lighting with half intensity, non-lighting of a
specific colour, blinking or flickering, but not included in

Type 1 or Type 2).

Error Class Type 1 Type 2 Type 3 Cluster

I

II

III

IV

0 0 0 0
2 2 5 2
5 15 50 5

50 150 500 50

Error Class Type 1 Type 2 Type 3 Cluster

LCD 19-6 Wide

3 3 7 3

20

TARGA GmbH
Lange Wende 41
D-59494 Soest
Deutschland
www.targa-online.com

Ready for you:

www.targa-online.com