Tanita MC-780A Portability Manual

Ⓘ

© 2015 TANITA Corporation MC7807721(0)-1501FA

1

2

3

Ⓒ

Ⓕ Ⓖ

Ⓗ

Ⓓ

Ⓔ

Ⓐ

Ⓑ

Turn on the printer.

Ensure that both the device and the printer are switched off
before connecting the USB mini B cable.

Connect the USB cable to the USB port with
the PictBridge symbol on the printer.

Printer is not included with the product.
Please purchase separately.

Connection to PictBridge Printer (Any commercially available printer that supports PictBridge can be used)

MC-780A

Portability Guide

Platform/Display/Accessories

Correct Installation

Display

Ⓐ

Grip holder

Ⓑ

Instruction manual

Ⓒ

Grips

Ⓓ

Platform

Ⓔ

AC power cable

Ⓕ

AC power adapter

Ⓖ

Cover for grip holder
Used when the display is removed.
(Refer to “Convenient Uses”)

Ⓗ

Cover

Ⓘ

Turn on the device.

USB mini B port

OFF

OFF

ON

ON

1

1 2

2

5 6

3 4

1)

2)

7

Handle

Handle hole

How to carry

Convenient Uses

Caution

How to Carry and Convenient Uses

Hook the display into the platform.

Place the cables above the grip holders. Hold the device by the handle when carrying.

1) Place the rings on the bottom of the cover onto the legs of the measurement stand.

2) Pass the handle of the platform through the handle hole of the cover.

・When removing the display, be sure to fasten the grips to the grip holders with
the fastening bands before turning over to remove the screws.

・Coil up the cable that connects the display with the device before storage.
・Hang the grip cables from the hooks on both sides of the grip holder.

Remove the display by unscrewing the two screws located
underneath the grip holder.

The grip holder cover is used when the display has been removed
from the grip holder.

Grip holder cover

The display can be removed for doctors to view while the patient holds the grips.

Hang the cables from the hooks located on both sides of
the grip holders.

Use the fastening bands to secure both grips to the device. Coil the display cable and fasten it with

the clip provided.