TANGENT EXEO-CDP User Manual

EXEO CDP

CONTENTS

SAFETY INFORMATION 1
IMPORTANT SAFETY INSTRUCTIONS 2
ACCESSORIES 4
CONNECTIONS 5
REMOTE CONTROL INFORMATION 6
FRONT PANEL INFORMATION 8
REAR PANEL INFORMATION 9
OPERATION AND FUNCTIONS 10
TROUBLESHOOTING GUIDE 11
SPECIFICATIONS 12

SAFETY INFORMATION

Caution:

- To reduce the risk of electric shock, do not remove Cover (or back)

- No user-serviceable parts inside.

- Refer servicing to qualified service personnel.

This lightning flash with arrowhead symbol, within an equilateral
triangle is intended to alert the user to the presence of uninstalled
“dangerous voltage” within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.

The symbol on this product indicates that it is of CLASS II
(double insulated) construction.

1

IMPORTANT SAFETY INSTRUCTIONS

ANTE NNA

ANTE NNA

DISC HARGE U NIT

(NEC S ECTIO N 810-2 1)

POWE R SERVI CE GRO UNDIN G

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

1. READ AND FOLLOW INSTRUCTIONS: All the safety and operation instructions should be read before the product is
operated. Follow all operation instructions within this manual.

2. RETAIN INSTRUCTIONS: The safety and operation instructions should be retained for future reference.

3. HEED WARNINGS: Comply with all warnings on the product and in the operation instructions.

4. CLEANING: Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a
damp cloth for cleaning.

5. GROUNDING or POLARIZATION: This product may be equipped with a polarized alternating current line plug (a plug
having one pin wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are
unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electricians
since it is likely you have an out of safe wall socket. Never force the plug into the socket.

6. OVERLOADING: Do not overload wall outlets or extension cords as this can result in the risk of
fire or electric shock. Overloaded AC outlets, extension cords, frayed power cables, damaged
or cracked wire insulation, and broken plugs are dangerous. They may result in electric shock
or fire hazard. Periodically examine the power cable - if its appearance indicates damage or
deteriorated receptacles have it replaced by your service technician.

7. POWER SOURCES: This product should be operated only from the type of power source indicated
on the rear panel label. If you are not sure of the type of power supply to your home, consult your
product dealer or local power company. For products intend to be operated from battery power, or
other sources, refer to the operation instructions.

8. ACCESSORIES: Do not place this product on an unstable surface or support. The product may fall,
causing serious injury to a child or adult as well as serious damage to the product. Any mounting of
the product should follow the manufacture’s instructions and use a mounting accessory
recommended by the manufacturer. A product and cart combination should be moved with care.
Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn.

9. OUTDOOR ANTENNA GROUNDING: If an outside antenna or cable system is connected to the product, be sure the
antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges.
The example below is for reference only. Correct grounding should always be installed by an electrician.

LEAD IN
WIR E

GROU ND
CLAM P

ELECTRIC
SERVICE
EQUI PMENT

10. POWER-CORD PROTECTION:

The power supply cables should be routed so that they are not likely to be walked on or

GROU NDING CONDUCTORS
(NE C SECTIO N 810-21)

GROU ND CLAMPS

ELEC TRODE SYSTE M
(NEC A RT 250. PART H)

pinched by items placed upon or against them, paying particular attention to cables at plugs and the point where they exit from
the product. The mains plug of the power supply cord shall remain readily operable.

11. ATTACHMENTS: Do not use unauthorized attachments as they may cause faults with the unit.

12. CONDITIONS REQUIREING SERVICE: Unplug this product from the wall outlet and refer servicing to qualified service
personnel under the following conditions.

a) If the unit exhibits sudden unusual operation or unusual display characteristics.
b) If liquid has been spilled, or objects have fallen into the product.
c) If the product has been exposed to rain or water.
d) If the product does not operate normally by following the operation instructions, adjusting only those controls that are

covered by the operation instructions. (NOTE: improper adjustment of other controls may result in damage and will

often require extensive work by a qualified technician to restore the product to its normal operation).
e) If the product has been dropped or damaged in any way.
f) If the product exhibits a distinct change in performance.

2

IMPORTANT SAFETY INSTRUCTIONS

Avoid high temperatures

Keep the set free from moisture.

Do not obstruct the ventilation

*(For sets with ventilation holes)

Do not let foreign objects in the set.

13. SERVICING: Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous
voltage and may damage precision components. Refer all servicing to qualified service personnel.

14. LIGHTNING: For added protection during a lightning storm, or when it is left unattended and unused for long period of time,

unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to
lightning and power line surges.

15. REPLACEMENT PARTS: Should replacement parts be required, has the service technician verify that the replacement parts
he uses have the same safety characteristics as the original parts. Use of unauthorized replacements parts can cause fire or
electric shock.

16. SAFETY CHECK: Upon completion of any service or repairs to this product, ask the service technician to perform safety
checks recommended by the manufacturer to determine that the product is in a safe operating condition.

17. HEAT DISPERSAL: Leave at least 10 cm of space between the top, back and sides of the unit and the wall or other electrical
components.

18. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be
placed on the apparatus.

19. NOTES ON USE

Allow for sufficient heat dispersion
when installed on a rack.

Handle the power cord carefully.
Hold the plug when unplugging the
cord.

water,and dust.

Unplug the power cord when not
using the set for long periods of
time

holes

Do not let insecticides,benzene,and
thinner come in contact with the set.

Never disassemble or modify the set
in any way.

3