Tact Audio M2150, S2150 Owner Manual
Update the M/S2150 Firmware
Y our M/S2150 has been pre-programmed with the latest firmware when shipped
from our factory and does not need to be updated with the program CD that came
with your unit. TacT Audio may occasionally release updated versions of the
M/S2150 software that will be available on our website “www .tactaudio.com”. This
new software may contain updates or enhancements for your M/S2150. When
instructed by a technician or messaged from our website please follow the
instruction below to update your M/S2150 firmware.
Step I:
Removing your old
M/S2150 Software
Step II:
Install your new
M/S2150 Software
Step III:
Reprogramming the
M/S2150 Firmware
Uninstall the current version of the M/S2150 software on your computer .
1 - Turn on your computer .
2 - Open the Windows control panel and select the “Add/Remove
Programs” option.
3 - Highlight the “Tact-2150” option and click on “Change/Remove”.
4 - Select “Yes” and the old T act M/S2150 sof tware will be removed.
NOTE:Y our files stored under unique names will NOT be removed.
Y ou now need to install the new TacT M/S2150 software on your computer .
- Double-click on the “T act 2150 vx.x.exe” file that you have downloaded or is
found on the root of your CD and follow the installation instructions.
Program the new firmware for the M/S2150.
1 - Connect the PC to the M/S2150 using the RS232 cable.
CAUTION: There should only be one M/S2150 connected to the RS232 cable
during system reprogramming. Please disconnect any other M/S2150 units
that may be daisy chained to the M/S2150 that is being programmed.
2 - Start the M/S2150 sof tware on your computer
3 - Use the “Com” option in the Tact M/S2150 sof tware to make sure that the M/
S2150 and your computer are communicating.
4 - Turn the M/S2150 OFF from the front panel power switch.
1T act Audio
Update the M/S2150 Firmware
5 - Press and hold the “DIGITAL” and “ANALOG” buttons on the front panel of the
M/S2150 simultaneously while you turn the unit back ON from the front-panel
power switch. Hold the buttons until the display shows the “PROGRAMMING
MODE” screen.
CAUTION
CAUTION
Tact-2150
Programing Mode
6 - From the TacT M/S2150 software main screen, click on “Add-Ins”. From the
drop down menu select “Standard M2150” if you have an M2150 or select
“Standard S2150” if you have an S2150. If you have the required license file
for the SP version of the 2150 software do not use the above selections and
please see below for more information.
SP - Software: If you have the required SP license file for your amplifier please
select either the “Standard M2150 SP” or “Standard S2150 SP” version that
matches your amplifier. This version of the firmware is available only to customers
that have the required license file.
2 T act Audio
Y ou should now see the Add-Ins window.
7 - Select the “Program” button and follow the prompts by answering all
questions. You will need to be able to answer “Yes” to all questions to start the
programming. The M/S2150 will turn OFF and then ON and return to normal
operation mode.
Loading...