Synology RS816 User Manual
Synology RackStation RS816
Hardware Installation Guide
Table of Contents
Chapter 1: Before You Start
Package Contents 3
Synology RackStation at a Glance 4
Safety Instructions 5
Chapter 2: Hardware Setup
Tools and Parts for Drive Installation 6
Install Drives 6
Start up the RackStation 8
Chapter 3: Install DSM on the RackStation
Install DSM with Web Assistant 9
Learn More 9
Appendix A: Specications
Appendix B: LED Indicator Table
Synology_HIG_RS816_20160810
2
Before You Start
Thank you for purchasing this Synology product! Before setting up your new RackStation, please check the
package contents to verify that you have received the items below. Also, make sure to read the safety instructions
carefully to avoid harming yourself or damaging your RackStation.
Package Contents
Main unit x 1 AC power cord x 1
Chapter
1
Screws for 3.5" hard
drives x 20
Screws for 2.5" hard
drives x 20
Rack mount kit x 2
Rack mount kit screws x 8 Hard drive tray key x 2
3
3
Synology RackStation at a Glance
No. Article Name Location Description
1
2
3
4
Power Indicator
Power Button
LAN Indicator
Drive Status Indicator
Front
Panel
Displays power status of the RackStation. For more information, see
"Appendix B: LED Indicator Table".
1. Press to power on the RackStation.
2. To power off the RackStation, press and hold until you hear a beep sound
and the Power LED starts blinking.
Displays LAN status of the RackStation. For more information, see "Appendix
B: LED Indicator Table".
Displays the status of installed drives. For more information, see "Appendix B:
LED Indicator Table".
5
6
7
8
9
10
11
12
13
14
Beep off Button Press to deactivate beep sound when malfunctions occur.
Status Indicator
Drive Tray Install drives here.
Fan
Power Port Connect power cord here to supply power to the RackStation.
LAN Port Connect network cables here.
RESET Button
USB 3.0 Port
eSATA Port
Console Port For manufacturing use only.
Back
Panel
Displays the status of the system. For more information, see "Appendix B:
LED Indicator Table".
Disposes of excess heat and cools the system. If the fan malfunctions, the
RackStation will emit a beeping sound.
1. Press and hold until you hear a beep sound to restore the default IP
address, DNS server, and password for the
2. Press and hold until you hear a beep sound, then press and hold again until
you hear three beep sounds to return the RackStation to “Not Installed”
status so that DiskStation Manager (DSM) can be reinstalled.
Connect external hard drives, USB printers, or other USB devices to the
RackStation here.
Connect an external SATA drive or Synology Expansion Unit1 to the
RackStation here.
admin
account.
1
For more information about Synology Expansion Units supported by your RackStation, please visit
4 Chapter 1: Before You Start
www.synology.com
.
Safety Instructions
Keep away from direct sunlight and away from chemicals. Make sure the environment does not
experience abrupt changes in temperature or humidity.
Place the product right side up at all times.
Do not place near any liquids.
Before cleaning, unplug the power cord. Wipe with damp paper towels. Do not use chemical or
aerosol cleaners.
To prevent the unit from falling over, do not place on carts or any unstable surfaces.
The power cord must plug in to the correct supply voltage. Make sure that the supplied AC voltage is
correct and stable.
To remove all electrical current from the device, ensure that all power cords are disconnected from
the power source.
Risk of explosion if battery is replaced with an incorrect type. Dispose of used batteries appropriately.
5 Chapter 1: Before You Start
Loading...