Synology router User Manual

Page 1
Product
Manual
WRX
560
Last Sep
23, 2023
Page 2
Ta
ble of Cont
en
ts
Chapter 1 Before You Start
2
1.1 Package contents
2
1.2 Synology Router at a gla
nce
2
1.3 LED Indicator table
4
1.4 Hardware specificatio
n
4
1.5 Safety in
structions
5
Chapter 2 Hardware Setup
7
2.1 Position your Synology Router
7
2.2 Set up your Synology Router
7
2.3 Use wir
eless dev
ices to co
nnect to
your Synology Router
7
2.4 Use wired dev
ices to co
nnect to
your Synology Router
8
Chapter 3 Set up Synology R
outer Manager
9
1
Page 3
Cha
pter 1 B
ef
ore You Sta
rt
Thank
you for
purchasing this Synology
product! Before sett
ing up your new Synology R
outer
,
please check the package contents to verify that
you have received the items below. Also, ma
ke
sure to read the safety in
structions carefully to avoid har
ming yours
elf or damaging your Synolog
y
R
outer
.
Notes:
All images below are for ill
ustrative
purposes only, and may differ from the actual
product
.
1.1 Pa
ckage conten
ts
Contact your res
eller if
your package is miss
ing any of the below contents
:
Main unit x
1
AC power adapter x
1
RJ
45 LAN cable x 1
1.2 Synology Router at a gla
nce
2
Page 4
No.
Na
me
Descriptio
n
1
USB
3.2 Gen
1
Type-A P
ort
Connect an external drives or other USB devices here.
2
Wi-Fi B
utto
n
Press the b
utton for 3 seconds to turn on/off the Wi-Fi ne
twork.
3
WPS B
utto
n
Press to start
WPS
.
4
STATUS
I
ndicator
Displays the status of the system. For more
information, see "L
ED
I
ndicator Ta
ble
".
5
Wi-Fi I
ndicator
Displays the status of Wi-Fi co
nnection. For more information,
see "LED Indicator Ta
ble
".
6
WAN I
ndicator
Displays the status of WAN co
nnection. For more information, s
ee
"LED I
ndicator Ta
ble
".
7
Power Butto
n
Press to
power on/off the Synology R
outer
.
8
Power Port
Connect the AC power adapter here.
9
WAN P
ort
Connect a network ca
ble from the ISP modem into this
port to
esta
blish WAN connection
.
10
2.5G WAN/LA
N
P
ort
Connect a network ca
ble from the ISP modem into this
port to
esta
blish WAN connection
.
Connect network ca
bles into these
ports to esta
blish LAN
connection
.
11
LAN P
ort
Connect a network ca
ble into this
port to esta
blish LAN
connection
.
12
RESET B
utto
n
Press and hold for 4 seconds Soft Reset) or for 10 seconds Har
d
Reset
).
3
Page 5
1.3 L
ED I
ndicator table
LED Indicator
Col
or
Sta
tus
Descriptio
n
STATUS I
ndicator
Green
Static
Powered o
n
B
linking
S
ystem Read
y
Ora
nge
Static
B
oot
ing up/Reboot
ing/Hard Rese
t
B
linking
Mesh network disco
nnected
Green/Ora
nge
B
linking
Searching device
O
ff
Powered o
ff
Wi-Fi I
ndicator
Green
Static
Wi-Fi activ
e
B
linking
WPS connecting
O
ff
No Wi-F
i
WAN I
ndicator
Green
Static
Network co
nnected
B
linking
Data transmitt
ing
O
ff
Network disco
nnected
1.4 Hardware
sp
ecificatio
n
Item
WRX
560
External P
ort
USB
3.2 Gen 1 Type-A x
1
WAN P
ort
Gigabit WAN x 1
Gigabit WAN x 1 and
2.5G WAN x 1 Dual WAN
LAN P
orts
Gigabit LAN x 3 and
2.5G LAN x
1
Gigabit LAN x 3 Dual WAN
Size H x W x D (mm
) 233 x 194 x 66
W
eight (kg
) 1.35
Wir
eless Standards
2.4GHz:
802.11 b/g/n/a
x
5GHz:
802.11 a/n/ac/ax
4
Page 6
Operating Frequenc
y
Ra
nge
802.11ax 2.4GHz): Up to 600 Mbps
802.11ax 5GHz): Up to 2400 Mbps
Wir
eless Operation Modes
Wir
eless Router
Wir
eless AP Access Point
)
Wir
eless Securi
ty
WPS support WPA2Pe
rsona
l
WPA/WPA2Persona
l
WPA2Ente
rpris
e
WPA/WPA2Enterpris
e
O
pportunistic Wireless Enc
ryption OWE
WPA3Pe
rsona
l
WPA3Ente
rpris
e
WPA2/WPA3Persona
l
Ant
ennas
2T2R Omni-directional high-gain dipole 2.4GHz
)
4T4R Omni-directional high-gain dipole 5GHz
)
B
uttons & Switche
s
Power
WPS Wi-Fi On/Off Reset
Enviro
nment Requiremen
t
L
ine voltage:
100V to
240V
AC
Frequency: 50 / 60Hz
Operating Temperature: 40˚F to 104˚F 5˚C to 40˚C
S
torage Temperature: 5˚F to 140˚F 20˚C to 60˚C
Relative Humidity: 5% to 95% R
H
Notes:
Model sp
ecifications are su
bject to cha
nge without notice. Refer to Synology
websitefor the latest
information.
1.5 Safety in
structions
Keep away from direct su
nlight and chemicals. Ensure a sta
ble environmen
t
with no abrupt changes in tempera
ture or hu
midity.
Place the unit r
ight side up at all t
imes.
5
Page 7
Keep the unit away from liquids.
Before
cleaning, unplug the
power cord(s) and use a damp cloth to wipe the
surface. Do not use
chemical aerosol
cleaners.
To prevent the unit from falling over, do not place it on carts or any unstable
surfaces
.
W
hen sett
ing up this product, use only Synology-
prov
ided or designat
ed
cables, power cords, PSUs, and
power adapters that a
dhere to local
regulations and safety requirements. Ensure the power cord(s) are plugged
into the c
orrect power supply voltage and that the AC voltage
prov
ided i
s
c
orrect and sta
ble. Failure to do so may result in malfunctions or fires
.
Do not use Synology-prov
ided a
cce
ssories on non-Synology products
.
Warning,
electric shock hazard. To remove all electrical c
urrent from t
he
device, ensure that all
power cords are disco
nnected from the
power source.
There is a risk of explosion if the battery is repla
ced with an inc
orrect type.
Dispose of used batteries appropriately.
Power cord(s) m
ust be plu
gged into a socket-
outlet with earthing
connection
.
Keep your body pa
rts away from a mov
ing fan
.
6
Page 8
Cha
pter 2 Hardware Se
tup
2.1 P
osition
your Synology Router
For
optimal performance, it is recommended to position
your Synology Router as advised below:
On a sta
ble surface (e.g., an elevated s
helf) away from any poss
ible physical interfer
ences.
Close to the center of the area where the wired/wireless
client dev
ices are placed, and wit
hin
a vis
ible dista
nce from the wireless dev
ices.
In a
position where few walls and
ceilings are betw
een your Synology Router and its clien
t
devices.
Away from any
potential
electrical s
ignal sources, such as other Wi-Fi
routers, 3G/4G bases
,
and
mic
rowave ovens.
Away from large expanses of metal or other materials, such as metal d
oors, glass pa
nels, a
nd
concrete
.
2.2 Set up your Synology Router
Use the
included ne
twork ca
ble to connect
your Synology Router (at the WAN1 port) to the I
SP
modem. Co
nnect one end of the power adapter to the power port on
your Synology Router, and
the other
end to the
power outlet. Press the
power b
utton to
power on
your Synology Router. Wai
t
for up to
two minutes until the STA
TUS and WAN LED indicators turn gr
een
.
2.3 Use wir
ele
ss devices to co
nnect to
your Synolog
y
R
outer
W
hen the Wi-Fi
indicator has tur
ned static gr
een, Synology R
outer is ready to co
nnect with other
devices. Use your wir
eless dev
ice to scan and join the Wi-Fi network created by
your Synolog
y
R
outer
.
From mobile device
:
7
Page 9
Scan the QR Code to download DS router
.
Use the
default credentials to co
nnect to the Wi-Fi ne
twork. T
hen follow the wizard to se
t
up Synology Router Manager
SRM
.
From laptop
:
Use the
default credentials to co
nnect to the Wi-Fi ne
twork.
Set up Synology Router Manager
SRM by following the steps in "Set up Synology Router
Manager
".
Notes:
The
default credentials for the Wi-Fi network:
Wi-Fi SSID Synology_Serial
)
Serialis the last 6
digits of your Synology Routers serial nu
mber.
Pa
ssword: synology
You must change the pa
ssword dur
ing the
initial SRM setup
.
2.4 Use wir
ed devices to co
nnect to
your Synolog
y
R
outer
Use ne
twork ca
bles to co
nnect dev
ices to the LAN ports. Then set up Synology Router Manager
SRM by following the steps in "Set up Synology Router Manager
".
8
Page 10
Cha
pter 3 Set up Synology Router
Mana
ge
r
Open a web browser, and enter either URL into the address bar
:
h
ttp
://
router.synology.com
h
ttp
://192.168.1.18000
O
nce connected,
click Startto launch the
SRM Setup Wizard.
Read th
rough and t
ick the
checkbox to co
nfirm that
you agree to the Synology End Use
r
L
icense Agr
eement. C
lick Nextto continue
.
9
Page 11
Read th
rough the Privacy Statement. C
lick Skipor Agreeto continue.
F
ill in the
information to set up the a
dmini
strator account. Click Nextto continue
.
F
ill in the
information to set up a Wi-Fi network. C
lick Applyto continue.
The wizard w
ill continue to set up your Synology Router, and it may take up to three minute
s
to complete the se
tup
.
10
Page 12
After the se
tup is complete, you can now sign in to SRM with the a
dmini
strator account
.
Notes:
Above is a general
demon
stration of the
SRM setup steps. The steps and available
options may somewhat vary dep
ending on
your device type PC or wirele
ss
device), access
type LAN, WAN, or Wir
eless LAN, and chosen operation mode
Wireless Router or Wir
eless AP
.
You can download DS
router on
your mobile device to manage your Synolog
y
R
outer from anywhere.
11
Page 13
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Operations in the 5.15-5.25GHz band are restricted to indoor usage only. This device meets all the other requirements specified in Part 15E, Section 15.407 of
the FCC Rules.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Note: The country code selection is for non-US model only and is not available to all US model. Per FCC regulation, all WiFi product marketed in US must fixed to US operation channels only.
FCC regulations restrict the operation of this device to indoor use only.
Synology America Headquarters 3535 Factoria Blvd SE, Suite #200, Bellevue, WA 98006, USA Tel: +1 425 818 1587
Page 14
Industry Canada statement:
This device complies with ISED’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Le présent appareil est conforme aux CNR d’ ISED applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable.
Caution :
(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
(ii) where applicable, antenna type(s), antenna models(s), and worst-case tilt angle(s) necessary to remain compliant with the e.i.r.p. elevation mask requirement set forth in section 6.2.2.3 shall be clearly indicated.
Avertissement:
Le guide d’utilisation des dispositifs pour réseaux locaux doit inclure des instructions précises sur les restrictions susmentionnées, notamment :
(i) les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux;
(ii) lorsqu’il y a lieu, les types d’antennes (s’il y en a plusieurs), les numéros de
modèle de l’antenne et les pires angles d’inclinaison nécessaires pour rester conforme à l’exigence de la p.i.r.e. applicable au masque d’élévation, énoncée à la section 6.2.2.3, doivent être clairement indiqués
Radiation Exposure Statement:
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with greater than 20cm between the radiator & your body.
Déclaration d'exposition aux radiations:
Cet équipement est conforme aux limites d'exposition aux rayonnements ISED établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé à plus de 20 cm entre le radiateur et votre corps.
Page 15
取得審驗證明之低功率射頻器材,非經核准,公司、商號或使用者均不得擅自變更頻率、加大功率或變 更原設計之特性及功能。 低功率射頻器材之使用不得影響飛航安全及干擾合法通信;經發現有干擾現象時,應立即停用,並改善
無干擾時方得繼續使用。前述合法通信,指依電信管理法規定作業之無線電通信。低功率射頻器材須
受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。
應避免影響附近雷達系統之操作。
Page 16
RED Compliance Statement Compliance with 2014/53/EU Radio Equipment Directive (RED)
In accordance with Article 10.8(a) and 10.8(b) of the RED, the following table provides information on the frequency bands used and the maximum RF transmit power of the product for sale in the EU:
Frequency Range
(MHz)
Max. Transmit Power (dBm) EIRP
2412 ~ 2472
19.93 dBm
5180 ~ 5320
22.87 dBm
5500 ~ 5700
29.83 dBm
This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
AT
BE
BG
HR
CY
CZ
DK EE
FI
FR
DE
EL
HU
IE IT
LV
LT
LU
MT
NL
PL PT
RO
SK
SI
ES
SE
UK
UK(NI)
This device is restricted to indoor use
報驗義務人:群暉科技股份有限公司 新北市板橋區遠東路19
Loading...