Synology DiskStation DS413j Quick Installation Manual

Synology DiskStation DS413j

Quick Installation Guide

Synology_QIG_DS413j_20120831

2

Table of Contents

Chapter 1: Before You Start

Package Contents .............................................................................................................................................................. 3

Synology DiskStation at a Glance .................................................................................................................................... 4

Safety Instructions .............................................................................................................................................................. 5

Chapter 2: Hardware Setup

Tools and Parts for Hard Disk Installation ....................................................................................................................... 6

Install Hard Disks ................................................................................................................................................................ 6

Start Up Your DiskStation ................................................................................................................................................ 10

Chapter 3: Install DSM on DiskStation

Install DSM from the Web Browser ................................................................................................................................ 11

Install DSM from the Installation Disc ............................................................................................................................ 12

Learn More ........................................................................................................................................................................ 16

Appendix A: Specifications

Appendix B: LED Indication Table

3

Chapter

1

Chapter 1: Before You Start

Before you start setting up DiskStation, please check the package contents to verify that you have received the
items below. Please also read the safety instructions carefully before use to prevent your DiskStation from any
damages.

Package Contents

Main Unit x 1

AC power cord x 1

AC power adapter x 1

RJ-45 LAN cable x 1

Installation disc x 1

Screws for 3.5"

hard drives x 18

Screws for 2.5"

hard drives x 18

Screws for securing

hard disk trays x 8

Cable lock x 1

4 Chapter 1: Before You Start

Synology DiskStation at a Glance

No. Name Location Description

1)

Power Button Front Panel

The power button is used to turn Synology DiskStation on or off.

To turn off Synology DiskStation, press the power button and hold it until
you hear a beep sound and the Power LED starts blinking.

2)

LED Indicators Front Panel

The LED indicator is used to display the status of the internal disk and
the system. For more information, see "Appendix B: LED Indication Table"
on Page 18.

3)

USB 2.0 Ports Back Panel

The Synology DiskStation offers USB ports for adding additional external
hard drives, USB printers, or other USB devices.

4)

Fans Back Panel

The fans are built to exhaust waste heat out of Synology DiskStation. If
the fan is malfunctioning, the system will play beep sounds.

5)

RESET Button Back Panel

1. To restore IP, DNS, passwords for the admin account to default value.

2. To reinstall the Synology DiskStation.

6)

LAN Port Back Panel

The LAN port is where you connect RJ-45 cable to Synology DiskStation.

7)

Power Port Back Panel

The power port is where you connect the AC adapter to
Synology DiskStation.

5 Chapter 1: Before You Start

Safety Instructions

Keep away from direct sunlight and away from chemicals. Make sure the environment does not

experience abrupt changes in temperature or humidity.

Do not place the Synology product close to any liquid.

Before cleaning, unplug the power cord first. Wipe Synology product with damp paper towels. Do
not use chemical or aerosol cleaners to clean it.

Do not place the Synology product on a cart, table, or desk, which is not stable to avoid the

product from falling over.

The power cord must plug in to the right supply voltage. Make sure that the supplied AC voltage

is correct and stable.

To remove all electrical current from the device, ensure that all power cords are disconnected
from the power source.

6

Chapter

2

Chapter 2: Hardware Setup

Tools and Parts for Hard Disk Installation

 A screwdriver

 At least one 3.5” or 2.5” SATA hard disk

(Please visit www.synology.com for compatible hard disk models.)

Warning: If you install a hard disk that contains data, system will format the hard disk and erase all data. If you need

the data in the future, please back it up before installation.

Install Hard Disks

1 Remove the 4 screws that secure the back cover, and then put the back cover down carefully.

2 Lift the upper case and then place it aside.

7 Chapter 2: Hardware Setup

3 Load the hard disk in the hard drive tray.

 For 3.5” Hard Disk: Place the hard disk in the hard drive tray, and then tighten the screws to secure the

hard disk.

 For 2.5” Hard Disk: Place the hard disk in the blue area (shown below) of the hard drive tray, turn the tray

upside down, and then tighten the screws to secure the hard disk.

4 Insert the loaded hard drive tray into the empty hard drive bay.

Important: Make sure the tray is pushed in all the way. Otherwise, the hard disk might not be able to function

properly.

5 Repeat the steps above to assemble the other hard disks you have prepared.