Page 1
Location:
Print
Email
Reset Form
Dia
Tub-Shower System
Specification Submittal
Feature Highlights
■ Symmons Tub-Shower System with Symmons Temptrol®
pressure-balancing mixing valve with adjustable stop screw
to limit handle turn
■ Screwless brass escutcheon (-B)
■ Cylinder (-CYL) style lever handle
■ Showerhead, single mode #352SH
■ Mounting bracket and ange for showerhead
■ Standard ow rate is 2.5 gpm (9.5 L/min)
Optional lower ow rate restrictor available
■ Tub-spout 7 inches #067
■ Polished chrome nish (standard)
Model Numbers
S-3502-CYL-B
☐
Tub-Shower System with Symmons Temptrol® mixing
valve p/n 4000-BODY
S-3502-CYL-B-TRM
☐
Trim only, valve must be ordered separately
S-4002-BODY
☐
Symmons Temptrol® mixing valve without trim
S-4002-X-BODY
☐
Symmons Temptrol® valve without trim. Valve includes
integral service stops to allow water shut-o for service
S-3502-CYL-B
™
Options / Modifications
Append appropriate -sux to model number
☐
☐
☐
☐
☐
☐
☐
☐
☐
☐
-CHKS
-REV
Delete
Suffix B
-L/HD
352SH-3
IPS connections: 1/2 inch female IPS
-IPS
connections on Temptrol® mixing valve
Service Stops: Temptrol® mixing valve
-X
includes integral service stops to allow water
shut-o for service, p/n S-4002-X-BODY
(Available when ordering model S-3502-CYL-B)
Check Stops: Temptrol® mixing valve
includes integral check stops
(Requires integral service stops, sux -X
Used in installations where a positive shut-o
device is used downstream of mixing valve.)
Reverse core: Temptrol® mixing valve
with reverse core. (Requires integral service
stops, sux -X . Used in back-to-back system
installations. HOT on the right, COLD on the le)
Chrome plastic escutcheon
chrome plastic escutcheon is supplied instead
of standard brass escutcheon
Flow rate restrictor, 2.0 gpm (7.6 L/min)
-2.0
Flow rate restrictor, 1.5 gpm (5.7 L/min)
-1.5
Showerhead not included,
Includes mounting bracket and ange
Showerhead is three-mode in place of
standard single mode
Slip-on tub spout instead of standard #067
-SS
.
Finish Options / Modifications
Append appropriate -sux to model number
☐
-STN
Satin nickel
-
Polished chrome (standard nish)
Standards / Certifications
ASME A112.18.1-2005 / CSA B125.1-05
Americans with Disabilities Act (ADA) compliant
Warranty
■ Limited Lifetime - to the original end purchaser in
consumer installations
■ 5 years - for commercial installations
Handle Options / Modifications
Append appropriate -sux to model number
-LR -LP
-LR
☐
☐
Lever handle
-LP
Loop style lever handle
Page 2
12"
(305 mm)
6-3/4"
(171 mm)
5-1/2"
(138 mm)
nished wall
Floor
hot / cold
supply
showerhead
supply
5/8" (16 mm)
2-1/2" dia
(64 mm)
1/2"-14 NPT
1/2"-14 NPT
mounting plate
p/n T-177
*
Note (1)
Temptrol
control
valve
*
Notes: (also reference page 2, figure 2 for details)
(1) Walls for using T-177 mounting plate (MP)
■ Wall thickness is 1/16" (2 mm) min • 1/2" (13 mm) max
■ Fiber or acrylic walls (MP is required)
■ Plaster or other type walls 1/2" or less (MP optional)
■ Protective shield usage (optional for protection only)
(2) Dry wall, plaster or other type walls 1/2" or greater
■ Protective shield attached to valve spindle to locate position
(3) Dimensions subject to change without notice
Wall cutout hole size
3-1/2" (89 mm) min
4" (101 mm) max
Finished wall to rear of valve
3-1/2" ± 1/2" (89 mm ±13 mm
Finished wall to pipe centerline
2-3/8" ± 1/2" (60 mm ±13 mm)
*see note (2)
Protective
shield
p/n T-176
7"
(178 mm)
2-1/2" dia
(64 mm)
tub spout
supply or
supply plug
COLD
supply
HOT
supply
approx
77"
(1956 mm)
5-1/4"
(133 mm)
2-7/8
±
½"
(72 mm
±
13 mm)
3"
(76 mm)
32"
(813mm)
7-1/2" dia (191 mm) brass
7-3/4" dia (197 mm) chrome
Dimensions
Dia Tub-Shower Systems, S-3502-CYL-B
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ (800)796-6667, (781)848-2250 ■ Fax: (800)961-9621, (781)664-1300
©2012 Symmons Industries, Inc. ■ Printed in U.S.A. ■ www.symmons.com ■ customerservice@symmons.com ■ 062112
Loading...