Symmons S-3500-CYL-B User Manual

Location:

Print

Email

Reset Form

Dia

™

Shower Valve System S-3500-CYL-B

Specification Submittal

Feature Highlights

■ Symmons Shower Valve System with Symmons Temptrol®
pressure-balancing mixing valve with adjustable stop screw
to limit handle turn

■ Screwless brass escutcheon (-B)

■ Cylinder (-CYL) style lever handle

■ Polished chrome nish (standard)

Model Numbers

S-3500-CYL-B

☐

Shower Valve System with Symmons Temptrol® mixing
valve p/n 4000-BODY

S-3500-CYL-B-TRM

☐

Trim only, valve must be ordered separately

S-4001-BODY

☐

Symmons Temptrol® mixing valve without trim

S-4001-X-BODY

☐

Symmons Temptrol® mixing valve without trim. Valve

includes integral service stops to allow water shut-o
for service

Options / Modifications

Append appropriate -sux to model number

☐

☐

☐

☐

☐

-IPS

-X

-REV

-CHKS

Delete

Suffix B

IPS connections: 1/2 inch female IPS

connections on Temptrol® mixing valve

(not available with service stops, sux -X)

Service Stops: Temptrol

includes integral service stops to allow water
shut-o for service, p/n S-4001-X-BODY
(available when ordering S-3500-CYL)

Reverse coring in valve for back to back

installations; hot on right, cold on le,
(available with sux -X service stops only)

Integral check stops for use in installations

where a positive shut-o device is used
downstream of mixing valve

(available with sux -X service stops only)

Chrome plastic escutcheon

chrome plastic escutcheon is supplied instead

of standard brass escutcheon

mixing valve

®

Handle Options / Modifications

Append appropriate -sux to model number

-LR -LP

-LR

☐
☐

Lever handle

-LP

Loop style lever handle

Finish Options / Modifications

Append appropriate -sux to model number

☐

-STN

Satin nickel

-

Polished chrome (standard nish)

Standards / Certifications

ASME A112.18.1-2005 / CSA B125.1-05
Americans with Disabilities Act (ADA) compliant

Warranty

■ Limited Lifetime - to the original end purchaser in

consumer installations

■ 5 years - for commercial installations

Dimensions Dia Shower Valve System, S-3500-CYL-B

nished wall

Finished wall to pipe centerline

2-3/8" ± 1/2" (60 mm ±13 mm)

*See note (2)

Finished wall to rear of valve

3-1/2" ± 1/2" (89 mm ±13 mm

Wall cutout hole size
3-1/2" (89 mm) min
4" (101 mm) min

7-3/4" dia

(197 mm)

3"

(76 mm)

±

13 mm)

±

2-7/8

(72 mm

Notes:

*

(1) Walls for using T-177 mounting plate (MP)

■ Wall is 1/16" (2 mm) min • 1/2" (13 mm) max

■ Fiber or acrylic walls (MP required)

■ Plaster or other type walls 1/2" or less (MP optional)

■ Protective shield usage (optional)

(2) Dry wall, plaster or other type walls 1/2" or greater

■ Protective shield is required; snaps on end of valve spindle...

(3) Dimensions subject to change without notice

½"

showerhead
supply

5/8" (16 mm)

mounting plate
p/n T-177

Note (1)

*

Temptrol
control valve

tub spout
supply plug

hot / cold
supply

Protective Shield
p/n T-176

approx

32"

(813 mm)

Floor

Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ [phone], [phone] ■ Fax: [phone]

©2012 Symmons Industries, Inc. ■ Printed in U.S.A. ■ www.symmons.com ■ [e-mail] ■ 062112