Symmons Oxford SLW-4212 Installation And Service Instructions Manual

Oxford

™

Two Handle Widespread Lavatory Faucet

SLW-4212

Installation and Service Instructions

Model Number

SLW-4212

Two Handle Lavatory
faucet with pop-up drain

Alternate Finish Code

append to part numbers when applicable

-STN

-ORB

--

Satin Nickel
Oil rubbed bronze
Chrome (standard)

Tools & Materials

3/32"

1 2 3 4

Pipe

Sealant

Plumbers

Putty

 Need Help?

Contact Symmons customer service at
[phone], [phone]
Email: [e-mail]
Monday - Friday 7:30 am - 7:00 pm EST

 Please check Symmons website

for technical help, the latest product
information and warranty policy.
www.symmons.com/service

Quick Install Guide Oxford Two Handle Widespread Lavatory Faucet, SLW-4212

Step 8

Flush water supply lines

Step 2

Attach faucet handles

Step 1

Step 3

Step 1

Attach faucet spout

Attach control valves to sink

Step 4

Step 1

Connect water supply lines

HOT

Non­Removable Removable

stopper stopper

COLD

Step 5

Fasten drain body and

tail piece to sink

For California Residents
WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.

Step 7

Connect lift rod, clevis strap,
pivot rod and adjust linkage

Step 6

Install stopper and pivot

rod to drain body

Installation Instructions

Caution: If replacing an older faucet ensure water supply is

turned OFF before removing. Then open faucet valves to relieve
water pressure.

Step 1 Attach control valves

screw down until
thread stops

Step 2 Attach handles

Step 4 Connect water supply lines

HOT

Pipe

Sealant

Step 5 Fasten drain body

COLD

OFF

OFF=CW

Step 3 Attach spout

front of sink

OFF=CCW

back of sink

3/32" Allen
wrench

2

1

PLUMBERS

PUTTY

tail

piece

ange

beveled
washer

friction
washer

ange nut

teon
tape

ange washer

*

(optional)

use included ange

*

washer only when
Plumbers putty is
not available or
when drain hole
dictates

back

of sink

Page 2

Step 6 Install stopper and pivot rod to drain

Replace appropriate hot

and cold cartridge as

Step 8 Flush water supply lines

1

2

non

removable

removable

Pipe

Sealant

Care of faucet finish

Clean finish area by using mild soap and water or non-abrasive
cleaner and then rinse immediately. A non-abrasive wax may be
used to preserve finish area.

Valve cartridge replacement

3/32" Allen
wrench

Step 7 Connect lift rod and adjust linkage

1/2" (13 mm)

1 2 3

Drain body

May also use a 17mm
deep socket wrench.

referenced in Replace-

ment Parts table.

OFF position

3/32" Allen
wrench

OFF = CW

OFF = CCW

Page 3

Dimensions Oxford Two Handle Widespread Lavatory Faucet, SLW-4212

4" (102 mm) min

2-3/4" (70 mm)

2-1/4" square
(56 mm)

1-1/8"

(28 mm)

7-3/8"

(187 mm)

5-1/8" (130 mm)

2" (51 mm) square

5-3/8"

(136 mm)

5-3/8"

(135 mm)

3-1/2"

(89 mm)

Deck thickness

1-3/8" (35 mm) max

5/8" dia. (16 mm)

1" dia (25 mm)

Hole size

1-1/16" (27 mm) min

1-1/4" (32 mm) min
1-1/2" (38 mm) max

Hole size

1-7/16" (37 mm) max

1/2"-14 NPSM

16"(406mm) max

8"(203mm) min

Flexible hose

Note: Dimensions subject to change without notice.

5/8" (15 mm)

Parts Assembly Oxford Two Handle Widespread Lavatory Faucet, SLW-4212

Replacement Parts

standard aerator

2.2 gpm

faucet handle

reference table

lift rod

LN-572*

spout

LN-610*

spout base

LN-571*

Part Number Item

handle

WSF-422L-KIT

includes two handle
assemblies

*

screw

collar

fastener

gasket

3-1/4"

(83 mm)

valve cartridge

reference table

(red stripe on hot hose)

*

stopper

P-100N*

pop-up drain

assembly

RL-154LR

includes stopper

Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02189
Phone: [phone]
Website:

symmons.com ■

*

■ Fax [phone]

Email:

[e-mail]

(blue stripe
on cold hose)

faucets with an optional decorative nish, append
appropriate three letter nish sufx code to part
numbers marked with an asterisk (

Ordering replacement parts:

Call Symmons customer service at [phone],
[phone] M-F 7:30 am - 7:00 pm EST or
check our website at www.symmons.com for a
list of Symmons distributors.

KN-114E (hot)

OFF = CW

KN-113E (cold)

OFF = CCW

LN-333-KIT
FLR-102-1.5-KIT
LN-742-KIT

Note: When ordering replacement parts for

KN-113E
identified
by groove

valve cartridge

aerator ow rates

2.2 gpm (8.3 L/min)

1.5 gpm (5.7 L/min)

1.0 gpm (3.8 L/min)

removal key

included

).

*

aerator

Copyright © 2017 Symmons Industries, Inc. ■ ZV-587 REV C ■ 020317