Page 1
4-10B
3
connections
Mechanical Mixing Valves
4-10A: To supply tempered water to a single supply faucet
3/8” compression connections
4-10B: To supply tempered water to the hot inlet of a two
supply faucet
4-10C: To supply tempered water to a single supply faucet
(2) 3/8” compression connections and (1) 1/2” IPS
connection
Symmons Mechanical mixing valve for tempered water supply to an indi-
vidual faucet. Includes 3/8” compression connections and integral checks.
Vandal resistant temperature adjustment. Chrome finish. Supply stops and
piping to and from mechanical mixing valve not supplied.
(4-10C)
(4-10A)
(4-10B)
Symmons Single Lever Faucet
Typical
(faucet not included)
Symmons Metering Faucet
Typical
(faucet not included)
4-10A
4-10B
4-10C
Compliance:
- ASME A112.18.1-2012/CSA B125.1-2012
- NSF 372, 61.9
- California Health and Safety Code 116875
(AB-1953-2006)
Job/Location
/8” compression
4-10C
(2) 3/8” compression
connections
3
/8”
compression
tee
1
/2”
IPS connection
. . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . .
Engineer
. . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . .
Contractor
. . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . .
For ADA compliance (Americans with
Disabilities Act) consult ADAAG or your
state regulations for proper product choice
and mounting locations.
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184
(800) 796-6667, (781) 848-2250
Website: www.symmons.com
©2014 Symmons Industries, Inc. Printed in U.S.A.
■ Fax (800) 961-9621, (781) 843-3849
■ Email: customerservice@symmons.com
■ 011314
Loading...