Symmons 352TS Installation Manual

352TS

™

Dia

Operation & Maintenance Manual

Model Number Specifications

Diverter Tub Spout

352TS Dia Diverter Tub Spout

7" diverter tub spout made from metal and plastic
materials plated in standard polished chrome nish.

Modifications Compliance

-STN Satin nickel finish

Note: Append appropriate -sufx to model number.

-ASME A112.18.1/CSA B125.1

Warranty

Limited Lifetime - to the original end purchaser in

consumer installations.
5 Years - for commercial installations.

Refer to www.symmons.com/warranty for complete
warranty information.

Dimensions

A Ø 2 1/2”, 64 mm

Measurements

AA

B

B

CC

Note: Dimensions are subject to change without notice.

D

D

B 4 3/4”, 121 mm

C 7”, 178 mm

D 1/2”-14 NPT

Required for Installation

Teon Tape

1

Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ [phone] ■ Fax: [phone]

©2014 Symmons Industries, Inc. ■ www.symmons.com ■ [e-mail] ■ ZV-3014 REV 0 01/15/2014

352TS

2

™

Dia

Operation & Maintenance Manual

Installation Operation

Diverter Tub Spout

1) Install diverter tub spout onto 1/2" NPT stub out
pipe. Turn clockwise to secure.

1

1) Diverter lever in down position for tub spout
operation.

2) Diverter lever in up position for shower operation.

Care and Cleaning

1) Clean nished trim area with a soft cloth using mild soap and water or a non-abrasive cleaner and then quickly rinse
with water.

2

Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ [phone] ■ Fax: [phone]

©2014 Symmons Industries, Inc. ■ www.symmons.com ■ [e-mail] ■ ZV-3014 REV 0 01/15/2014