Symmons 352SH Installation Manual

352SH, 352SH-3

IAPMO R&T

™

Dia

Operation & Maintenance Manual

Model Numbers Specifications

Showerhead Series

352SH Dia 3" 1 Mode Showerhead

352SH-3 Dia 3" 3 Mode Showerhead

3" 1 mode showerhead (352SH) and 3" 3 mode
showerhead (352SH-3) inlcude standard 2.5 gpm
(9.5 L/min) ow restrictor. Components made from metal
and plastic materials plated in standard polished chrome
nish.

Modifications Compliance

-1.5 1.5 gpm (5.7 L/min) flow restrictor

-2.0 2.0 gpm (7.6 L/min) flow restrictor

-STN Satin nickel finish

-ASME A112.18.1/CSA B125.1

-WaterSense (1.5 & 2.0 gpm)

Warranty

Limited Lifetime - to the original end purchaser in

consumer installations.
5 Years - for commercial installations.

Refer to www.symmons.com/warranty for complete

Note: Append appropriate -sufx to model number.

warranty information.

Dimensions

352SH

B

B

A 4 1/4”, 108 mm

Measurements

Certied by

c

AA

352SH-3

D

D

C

C

Note: Dimensions are subject to change without notice.

1

Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ [phone] ■ Fax: [phone]

©2014 Symmons Industries, Inc. ■ www.symmons.com ■ [e-mail] ■ ZV-3013 REV 0 01/15/2014

B 4 1/8”, 105 mm

C 4 3/4”, 121 mm

D 4 1/2”, 114 mm

Required for Installation

Teon Tape

352SH, 352SH-3

2

™

Dia

Operation & Maintenance Manual

Installation Operation

Showerhead Series

1) Install showerhead to shower arm (not included) turn­ing clockwise to tighten.

1

1) Turn showerhead to desired mode of operation.

Care and Cleaning

1) Clean nished trim area with a soft cloth using mild soap and water or a non-abrasive cleaner and then quickly rinse
with water.

Troubleshooting Chart

Problem Cause Solution

Finish is spotting. Elements in water supply may cause

water staining on nish.

Showerhead is leaking from shower

arm when valve is in “on” position.

2

Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ [phone] ■ Fax: [phone]

©2014 Symmons Industries, Inc. ■ www.symmons.com ■ [e-mail] ■ ZV-3013 REV 0 01/15/2014

Coupling connecting showerhead

to shower arm is cracked or washer

inside coupling is worn.

Clean nished trim area with a soft

cloth using mild soap and water or a

non-abrasive cleaner and then

quickly rinse with water.

Inspect coupling and washer

and replace showerhead if

necessary.