Symmons 3506-H321-V-CYL-B User Manual

Download

Page 1

Location:

Reset Form

Dia

™

Tub-Shower & Hand Shower System 3506-H321-V-CYL-B

Speciﬁcation Submittal

Feature Highlights

■ Symmons Shower-Hand Shower System with Symmons Temptro l® pressure-balancing mixing valve with adjustable stop screw to limit handle turn

■ Screwless brass escutcheon (-B)

■ Cylinder (-CYL) style lever handles

■ Separate triple outlet diverter valve

■ Showerhead, single mode #352SH

■ Mounting bracket and ange for showerhead

■ Standard ow rate is 2.5 gpm (9.5 L/min) Optional lower ow rate restrictor available

■ Wall/hand shower, single mode, #H321-V with 5 foot exible metal hose, in-line vacuum breaker, wall connection

■ 30 inch slide bar and cradle for hand shower mounting

■ Tub spout #067

■ Polished chrome nish (standard)

Model Numbers

3506-H321-V-CYL-B

☐

Tub-Hand Shower System with Symmons Temptrol®

mixing valve p/n 4000-BODY

3506-H321-V-CYL-B-TRM

☐

Trim only, valve must be ordered separately

4000-BODY

☐

Symmons Temptrol® mixing valve without trim

4000-X-BODY

☐

Symmons Temptrol® mixing valve without trim. Valve includes integral service stops

3DIV-BODY

☐

Symmons triple outlet diverter valve without trim

Handle Options / Modiﬁcations

Append appropriate -sux to model number

-LR -LP

Options / Modiﬁcations

Append appropriate -sux to model number

☐

Suffix B

352SH-3

☐

☐ ☐

☐

☐ ☐ ☐ ☐ ☐

☐ ☐

-CHKS

-REV

Delete

-L/HS

-L/HD

IPS connections: 1/2 inch female IPS

-IPS

connections on Temptrol® mixing valve

Service Stops: Temptrol® mixing valve

-X includes integral service stops to allow water

shut-o for service, p/n 4000-X-BODY (available when ordering 3506-H321-V-CYL-B)

Check Stops: Temptrol® mixing valve

includes integral check stops

(Requires integral service stops, sux -X

Used in installations where a positive shut-o device is used downstream of mixing valve.)

Reverse core: Temptrol® mixing valve

with reverse core. (Requires integral service

stops, sux -X . Used in back-to-back system installations. HOT on the right, COLD on the le)

Chrome plastic escutcheon

chrome plastic escutcheon is supplied instead

of standard brass escutcheon

Showerhead is three-mode in place of

standard single mode

Flow rate restrictor, 2.0 gpm (7.6 L/min)

-2.0 Flow rate restrictor, 1.5 gpm (5.7 L/min)

-1.5

Hand Shower wand not included, Includes hose, in-line vacuum breaker, wall

connections and ange only

Showerhead not included,

Includes mounting bracket and ange

Quick-disconnect on hand shower

-QD

6 foot metal hose in place of 5 foot hose

-72

Vinyle 5 foot hose in place of metal hose

-R60

Vinyle 6 foot hose in place of metal hose

-R72

Slip-on tub spout instead of standard spout

-SS

24 inch grab bar assembly

-T24

36 inch grab bar assembly

-T36

☐

Warranty

■ 5 years - for commercial installations

-LR

Lever handle

-LP

Loop style lever handle

Finish Options / Modiﬁcations

Append appropriate -sux to model number

☐

-STN

Satin nickel

Polished chrome (standard nish)

Standards / Certiﬁcations

ASME A112.18.1/CSA B125.1 Americans with Disabilities Act (ADA) compliant

Page 2

Dimensions Dia Tub-Shower & Hand Shower, 3506-H321-CYL-B

Male 1/2" IPS thread must be recessed 1/4" (6 mm) from nished wall for proper installation of wall ell.

5-1/2"

(140 mm)

∅ 2-1/2"

(64 mm)

2-1/2"

(65 mm)

∅ 5"

(127 mm)

approx.

(152 mm)

2-1/8"

(53 mm)

∅ 7-3/4"

(197 mm)

Vertical Bar

Length Dimension

30" 31" (787 mm) 48" 49" (1245 mm)

Vertical

bar

table

(1143 mm)

6-3/4" ±1/2"

(171 mm ±13 mm)

approx.

45"

(203 mm)

nished wall

shower discharge

3-1/2"

(89 mm)

mounting plates * see notes (1), (2)

∅ 2-1/2"

(64 mm)

Notes:

(1) Walls for using T-177 mounting plate (MP)

■ Wall is 1/16" (2 mm) min, 1/2" (13 mm) max.

■ Fiber or acrylic walls (mounting plate required)

■ Plaster or other type walls 1/2" or less

(MP optional)

■ Using protective shield (optional)

(2) Dimension applies when mounting plate

is not used.

(3) Dry wall, plaster or other type walls 1/2" or greater is required to use protective shield;

snap on end of valve spindle..............

(4) Dimensions subject to change without notice

approx.

32"

(813 mm)

oor line

(72 mm ±13 mm)

12"

(305 mm)

(76 mm)

2-7/8" ±1/2"

2-3/8" ±1/2"

(60 mm ±13 mm)

* see note (2)

1/2"-14 NPT

5-1/4"

(133 mm) 7"

(178 mm)

Symmons Industries, Inc. 31 Brooks Drive ■ Braintree, MA 02184 ■ Phone: (800) 796-6667 ■ Fax: (800) 961-9621